Latest project documentation Tenders | Government project documentation Tenders

State Government

CTN :41333626

12 Aug, 2025 2.18 Crore

Udaipur - Rajasthan

Tender For purchase of various testing major apparatus (lab equipment) in quality control labs under zone ajmer, bikaner,udaipur-i and udaipur-ii - fully automatic servo controlled compression testing machine (ctm)-3000 kn capacity with additional load frame of 500 kn capacity & flexure frame of 100 kn capacity:- supplying, fixing and commissioning of fully automatic servo controlled compression testing machine (ctm) of 3000 kn capacity which should be capable of conducting compression test on concrete & mortar specimens and allied products as per is : 516 & is :4031 (part-6). the machine should be power operated with servo controlled motor capable to apply the load continuous by without shock and there shall be large enough space provided for test specimen to accommodate in a readable position. machine shall have good load control and capable of applying the load at the specified rate, uniformly with automatic control with percentage of error for load shall not exceed + 1.0% of the indicated load. the system shall have an arrangement for automatic placing system, which achieved by the combination of advance hydraulic and electronic system. the systems can be loaded in load, displacement or strain control basis. complete machine unit shall conform to is: 14858-2000 and is: 9399-1979 and as per direction of engineer in charge. the salient features and technical specification of the machine shall be as under :- i) ctm-3000 kn machine loading frame - four column high stiffness welded from with enough stabiility . - heavy duty mechanical platens with spherical seated block (vicker hardness > 550), bottom bearing, blocks, auxiliary plates (vh > 550) shall have flatness tolerance within 0.03 mm and squareness and parallelism tolerance within 0.06 mm wide.- base shall have fine finished servo controlled hydraulic cylinder with hardened and finest abraded piston. - frame with safety guard door and transparent fragment guard (both front & rear) (ii) hydraulic pumping system, it should be compact in design and suitable for the supply of required flow and pressure for the movement of the actuactor. it shall have oil tank of adequate capcity vane type pump powered by three phase motor. anti vibration mounting shall provided as standard along with the hps.iii) micro-processed (plc & hmi) based touch panel display & control system user friendly interface control system with application software shall provide the digital servo control, precise operation, ramp generation for the machine, data acquisition, storage, processing, analyzing and reporting etc for the continuous operation of the system.iv) technical specification of ctm (3000 kn) capacity -3000 kn, platen size 320 mm dia, ram dia 260 mm, ram travel 50 mm, vertical daylight clearance 350 mm, horizontal daylight clearance 370 mm, least count - 0.1 kn, pace rate controlling -1%, rate of loading 1.3 mm/min (when running idle), 0.14 to 032 mpa/sec (with specimen), motor capacity 3 hp (min), power supply (240v, 50-60hg, three phase.), capacity of oil tank 20 litre, max. operating pressure 210- 600 bars, flow of pump 2 & 4 lpm (duel speed) , auto stop & release of pressure when specimen failure, multi operation compression test up to 3000kn, up to 500 kn range and flexure test, accessories spacers- 4nos, controller unit auto pid operation with closed loop update rate of 10 khz to control pace rate automatically as programmed. start, stop & hold test system, load control 01kn/sec to 50 kn/sec., displacement control 0.01 mm/sec to 1mm/sec. load indication & control coloured touch screen display of suitable size, test report facility to print test report, export data to ms excel. auto internal calibration without proving ring, short circling protection overload safety cut off, piston over travel safety cut off- shall be made in addition to 3 kva 3 ph servo control stabilizer, technical specification of ctm (500 kn) load frame- capacity 500 kn, platen size 256 mm,

Central Government/Public Sector

CTN :41344444

16 Aug, 2025 1.76 Lacs

Chakeri - Uttar Pradesh

Tender For load testing of cranes at hangers tech area under ge (af) e/m chakeri

Central Government/Public Sector

CTN :41329857

16 Aug, 2025 1.27 Lacs

Chandrapur - Maharashtra

Tender For providing of custom bid for services - ndt and safe proof load testing of 40t til crane 9-5t escort crane 11t ace crane

CTN :41344098

27 Aug, 2025 99.75 Lacs

Visakhapatnam - Andhra Pradesh

Tender For supply of design supply commissioning and testing of one 200 kva helo starting converter mobile load bank

CTN :41345582

29 Aug, 2025 NA

Multi City - Multi State

Tender For inspection, load testing & certification of different size of air reservoirs/pressure vessel of air compressors, chain slings, pillar crane, lifting tackles & eot cranes (gkps & divisions) for two years as per scope of work.

CTN :41314559

19 Aug, 2025 NA

Balangir - Odisha

Tender For supply of fuses , rheostat sliding type , capacitors , various electronic components , various lamps , plug socket piano switch , cables , bus bar with brackets , rubber mat , electrician helmet , rcc pole with accessories , safety belt , ohm meter series type shunt type portable box type , digital multi meter , a.c. voltmeter m.i. analog, portable box type housed in bakelite , milli voltmeter centre zero analog, , ammeter mc analog, portable box type housed in bakelite case , ac ammeter mi, analog, portable box type housed in bakelite case , kilo wattmeter analog , digital wattmeter , a.c. energy meter , power factor meter digital , frequency meter , magnetic flux meter , lux meter , tachometer , tong tester clamp meter , megger , 3- point d.c. starter , 4- point d.c. starter , wheat stone bridge with galvanometer and battery , single phase variable auto , phase sequence indicator , growler , ac starters , oscilloscope dual trace , function generator , soldering iron , temperature controlled soldering , discrete component trainer , linear i.c. trainer , digital i.c. trainer , domestic appliances , oil testing kit , inverter with battery , voltage stabilizer , dc power supply , battery charger , current transformer , potential transformer , solar panel with battery , d.c. shunt generator with control panel , motor- generator ac to dc , d.c. compound generator with control panel including fitted rheostat, voltmeter, ammeter and breaker , dc series motor coupled with spring balance load , dc shunt motor , dc compound motor with starter , motor generatordc to ac set consisting , ac squirrel cage motor with star delta , ac phase-wound slip ring motor with starter switch , universal motor with starterswitch , synchronous motor with accessories like starter, excitation , thyristor igbt controlled d.c. motor drive with tacho-generator , thyristorigbt controlled a.c. motor drive with , single phase transformer, core type, air cooled , three phase transformer, shell type oil cooled with delta star , electrical machine trainer , diesel generator set with changeover switch over cut , used dc generators-series, shunt and compound type for overh , pillar electric drill machine motorized , motorised bench grinder , a.c. series type motor , single phase capacitor motor with , manual motor coil winding machine , ceiling fan coil winding machine , primary current injection set , stepper motor with digital controller , shaded pole motor , smart meter , ev charger , ev charger home , wiring board , metal rack , black boardwhite board , fire extinguisher co2 , fire buckets

State Government

CTN :41323136

02 Aug, 2025 30.00 Lacs

Bhagalpur - Bihar

Tender For supply of machines and equipment for electronics engineering lab at the government polytechnic, bhagalpur--, 8085 microprocessor simulator/kit, , 8051 microcontroller ide/assembler/compiler, , 8051 microcontroller development board /programmer, , pre-emphasis and de-emphasis circuit kit, , am/fm trainer kit (for snr measurement & receiver testing), , synchro transmitter and receiver trainer kit, , integrated trainer kit for dc servo motor (educational purposes), , basic educational/laboratory trainer kit (for small ac servo motors, usually with a dc motor as load), , pi temperature control trainer kit, , pd temperature control trainer kit, , pid temperature control trainer kit, , digital multimeter (dmm)

Central Government/Public Sector

CTN :41328941

06 Aug, 2025 NA

Ranchi - Jharkhand

Tender For design, engineering, manufacture and supply of belt weigh scales including accessories as well as supervision of works during erection, trial run, testing, commissioning and conducting load tests of the equipment, required for bauxite storage, handling and secondary crushing package for 1.0 mtpa alumina refinery stream _ 5 of m/s national aluminium company limited _nalco_ at damanjodi, odisha.

corporations/Associations/Others

CTN :41318293

19 Aug, 2025 NA

Tuticorin - Tamil Nadu

Tender For ttps es circle em iii load testing of 4 nos 10 tonne capacity wire rope electric hoists at fd fan and pa fan motor 4a and 4b of unit 4 boiler area

Central Government/Public Sector

CTN :41339762

12 Aug, 2025 NA

Coimbatore - Tamil Nadu

Tender For power transmission assembly for electric point machine to description no. d.2118-00-1 8 of s&t workshop, podanur. firm shall have the full-fledged testing facilities similar to testing bay of electric point m/c to conduct tests as per irs.s.24 & irs.s.10 on the following parameters. (1) working load (2)time of operation (3) stalling thrust (4) slip load (5)stroke length of drive rod (6) locking a nd detection parameters. ultrasonic testing to be conducted on drive rod to ensure the material is fre e from internal cracks/defects by the supplier and for proof of this, test certificate from reputed testing labs shall be enclosed along with each supply. [ warranty period: 30 months after the date of delive ry ]

Project Documentation Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

Central Government/Public Sector

State Government

Central Government/Public Sector

corporations/Associations/Others

Central Government/Public Sector