Latest propel brake spares Tenders | Government propel brake spares Tenders

CTN :40296664

03 Jun, 2025 1.00 Lacs

Leh - Jammu And Kashmir

Tender For corrigendum : supply of repair of door guard of m and m scorpio , repair and fitment of front wind shield assy of tata safari , wheel alignment of tata safari , ac repair of tata safari , greasing of tata safari , wheel balancing of tata safari , repair of master cyl head of tata safari , repair of turbo charger of tata safari , eng up and down fitting charge of tata safari , labour charge for repair of tata safari , repair of engine head of m and m scorpio , repair of sensor and electric system of m and m scorpio

CTN :40557915

02 Jun, 2025 NA

Chamba - Himachal Pradesh

Tender For supply of wheel alignment equipment (q3)

CTN :40514350

06 Jun, 2025 7.92 Crore

Jhajha - Bihar

Tender For mr-n/25-26/jhajha/02 - basbutiya to basahara road, providing & fixing of working benchmark pillars 01 nos. per km & 04 nos. of reference pillars required for 1 km. as per drawings given and direction of e/i, clearing and grubbing road land ( by manual means) including uprooting wild vegetation , grass ,bushes ,shrubs , saplings and trees of girth upto 300mm , removals of stumps of such trees cut earlier & disposal of unserviceable materials & stacking of serviceable materials to be used or auctioned upto a lead of 1000 m including removal and disposal of top organic soil not exeeding 150mm in thickness as per technical specification - clause 201.1 and direction of e/i, scrarifying existing bituminous surface to a depth of 150 mm and disposal disposal of scrarified materials with a lift upto 3m and lead upto 1000m as per technical specification clause 301.4, construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300.2 with lead upto 1000 m & 100 m as per technical specification clause 303.1. (including royality & labour cess)., construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at omc, and compacting with smooth wheel roller to achieve the desired density, complete as per technical specification clause 401., providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kn in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 3 as per technical specification clause 405., providing and applying primer coat with bitumen emulsion (ss-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.90- 1.2 kg/sqm using mechanical means as per technical specification clause 502., providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surface tretaed with primer and clened with hydriloc broom as per technical specification aclouse 503., providing and applying tack coat with bitumen emulsion (rs-1) using emulsion distributor at the rate of 0.25 to 0.3 kg per sqm on the prepared bituminous surface cleaned with hydraulic broom as per technical specification clause 503., providing and laying bituminous macadam with 100-120 tph hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading premixed with bituminous binder, transported to site, laid over apreviously prepared surface with paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction., providing and laying semi dense bituminous concrete with 100-120 tph batch type hmp producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 to 5 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per morth specification clause no. 508 complete in all respects., construction of dry lean concrete sub base over a prepared sub grade with coarse and fine aggregate conforming to is 383 , the size of coarse agg. not exceeding 25mm , agg. cememt ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1 , cement content not to be less tha

CTN :40508661

09 Jun, 2025 NA

Jamnagar - Gujarat

Tender For providing of repair and overhauling service - repair of computerised wheel alignment machine; repair of computerised wheel alignment machine; yes; buyer premises

CTN :40268198

03 Jun, 2025 NA

Jabalpur - Madhya Pradesh

Tender For corrigendum : supply of wheel alignment of lpta tata 715 tc 32 bs-iii (4x4) vehicles

CTN :40467994

14 Jun, 2025 NA

Kupwara - Jammu And Kashmir

Tender For repair of rotary pump oh , repair of injector , repair of hand primer fuel pump , repair of vane pump , edc pump oh , wheel alignment

CTN :39162749

17 Jun, 2025 NA

Tiruvallur - Tamil Nadu

Tender For corrigendum : supply of hull idler wheel alignment testing stand

CTN :40229759

06 Jun, 2025 NA

Leh - Jammu And Kashmir

Tender For corrigendum : supply of air filter , oil filter , brake hose , urea for bolero , wheel alignment wheel balancing of bolero , def pump nozzle change pump repair and service charge of bolero , engine oil change , steering oil , brake pads , labour cost

CTN :40362541

06 Jun, 2025 NA

Shimla - Himachal Pradesh

Tender For vehicle repair - carriyng the veh to authorised workshop for repair servicingwashing with soap water to remove grease/mud including replacement of defective parts such as engine oil gear oil coolant air oil filter etc attending faults of mechanical electrical nature etc tappet settings if required cleaning and tightening of loose fastener and tune up the engine hub greasing and greasing of parts checking of batteries applying petroleum jelly to battery terminals adding distilled water checking the oil coolant levels of vehicle of mahindra bolero camper complete all as specified and directed by engr in charge note replacement of defective parts engine oil coolant etc which ever is required measured and paid seprately , labour only for repair to wheel and brake system after opening and taking out all four drums from wheel and taking out old unserviceable wheel bearing from front and rear wheels greasing wheel hubs complete filling of brake fluid and bleeding the brake system with brake fluid assembling of wheels and testing the brake system including balancing on computer machine and wheel alignment of mahindra bolero camper vehicle complete for smooth functioning of vehicle on road complete all as specified and directed by engr in charge spare parts which ever is required measured and paid seprately. , supply only for following spare parts , supply only oil filter 1 point 0 nos , supply only air filter 1 point 0 nos , supply only front wiper blade 2 nos , supply only front brake pad 1 point 0 set of 2 , supply only wheel cover 1 point 0 set of 4 , supply only mud guard flap as per sample 4 point 0 nos , supply only brake shoe set 1 point 0 set of 4 , supply only engine oil 7ltrs , supply only transmission oil 2 point 0 ltrs , supply only brake & clutch oil 1 point 0 ltrs , supply only coolant 8 ltrs , supply only distill water for battery 1ltrs

CTN :40384596

07 Jun, 2025 NA

Jodhpur - Rajasthan

Tender For repair of vehicle - overhauling of self starter incl replacement of counter teeth gear bentex carbon bush spring and tapping of field coil , replacement of hydraulic jack seal repairing of hydraulic system and of hydraulic tank and replace hydraulic liver , replacement of gear oil , replacement of hydraulic oil , replacement of engine oil , replacement of fuel filter , replacement of oil filter , replacement of air cleaning elements , replacement of clutch assemble complete , ml for repairing fuel pump assembly by calibration of fuel pump with injection tips including replacement of spring plunger , replacement of ignition switch assembly complete with steering lock , wheel balancing and alignment including brake adjustment , tank cleaning and washing , dismantling of rear and front wheel and overhauling greasing of four wheel replacement of oil seal 08 no wheel cylinder bid number/ & ( * ) : gem/2025/b/6242801 dated/ + : 17-05-2025 bid document/ 3 3 1 / 17

Propel Brake Spares Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors