Latest proportioner Tenders | Government proportioner Tenders

State Government

CTN :44798192

28 Apr, 2026 1.97 Lacs

Durg - Chhattisgarh

Tender For the detail of works includes:a. the tenderer shall carryout the following works during annual maintenance contract period along with the servicing of the diesel generator set.1. general checkup & preventive maintenance and to fill up preventive checkup schedule as follows:a) check lube oil level and conditioning of lube oil, top up/refill if required.b) the oil filters shall be replaced whenever oil is changed.c) the air filters shall be cleaned periodically with compressed air, check batteries and top up the distilled water if required.d) check functioning of changing alternator.e) engine safety viz. high water temperature gauge, oil temperature gauge and high speed gauge shall be checked for their functions and repaired/replaced if required.f) coolant level and conditioning of coolant shall be checked and refilled if required.g) check fan and alternator drive belts and tightened if required.h) the governor shall be checked and tuned for proper functioning.i) check for leaks if any and shall be rectified.j) check reports shall be submitted every month/every breakdown calls.2. checking and servicing of engine for smooth running, its unusual sound and color of smoke and exhaust and set it right in case of deviations.3. checking and repairing and leakage of fuel, lubricating oil and coolant.4. cleaning and changing of air filters as per requirement.5. setting of valves tappets whenever required.6. checking and repairing of accessories drive, turbo charger and crankshaft endplay whenever required.7. checking of alignment of engine & alternator as per requirement.8. checking of throttle control and its setting.9. checking of instrument panel including replacement as and when required.10. checking of rotating diodes assembly in brushless alternator including replacement as and when required.11. checking of wiring system and repairing/replacement as and when required.12. repair and maintenance of relays including contractors in control panel.13. checking of battery terminal and de-sulphating.14. diagnosis of faults in engine and alternator and its rectification.15. breakdown calls to be attended on priority within 6 hrs.16. providing spare avrs, self-starter and accessories, free of charge, if the repair/overhaul/replacement is expected to be taken in more than two days.17. checking/repair/adjustment/replacement/servicing shall be carried under annual maintenance contract except cost of component/parts to be replaced due to wear & tear.18. the firm should undertake to arrange genuine spares of the diesel engine, alternator and amf panel as and when required within two working days.19. the tendererâ€™s service engineer shall visit the site for attending the generator sets not less than twelve times during the contract period (minimum once in a month) and shall inspect the generator set thoroughly. each visit shall take place during 1st week of each month.20. the tendererâ€™s service engineer shall visit once in two month for checking of electrical side viz. alternator, amf control panel, if any.21. the engine shall be run on no load or at available load, and should be checked for any leakage and abnormal noise. if any such abnormality noticed shall be diagnosed and remedial action shall be taken.22. standard check list:a) replace minor parts (i.e hoses and filters etc) sub-assemblies as and when required.b) service engineers during the visit will report on the performance or any other abnormality and inform parts requirement. he shall also submit the report on work done and recommendations as well as spare parts required.c) attend emergency call on priority (usually same day). however, if the engineer is required or any particular date and time, it would be the responsibility of the customer to intimate the contractor in advance.d) major overhauling/ top overhauling / pt pump & injector calibration /replacement of major parts/ rewinding of alternator or repairs or breakdown of the diesel generator set are to be charge

CTN :44793308

07 May, 2026 NA

Gorakhpur - Uttar Pradesh

Tender For supply & installation of aerosol based fire detection & suppression system cartridge for sg ac coaches. the cartridge contains 01 no. of minimum 40gm for power panel, 02 no. of minimum 15gm for rmpu control panel & 02 no. of minimum 10gm for inverter panel of sg ac coaches as per thetechnical requirement in annexure-g1 of rdso specification no. rdso/pe/spec/ac/0192-2018(rev-1) & rdso letter no. el/7.1.108/mssbc/main dated 12.05.2022. all necessary modification, clamping arrangement& accessories required for installation of this item for sg ac coaches shall be with the scope of this supplier. note: location of installation of aerosol fire cartridge shall be as per rdso letter no. el/7.1.108/mssbc/main dated 12.05.2022 & cartridge may be provided in line with technical parameters note: aerosol-basedfire detection & suppression system having action temperature should be 68-72 degree celsius as per latest rdso l. no. el/7.1.108/sbc/main dated 06.08.2025 [ warranty period: 30 months after the date of delivery ]

CTN :44768678

21 Apr, 2026 30.00 Lacs

Osmanabad - Maharashtra

Tender For supply of solar insulation meter , pyranometer , pyrheliometer , lux meter lux meter lcd read out 005 to 7000 lumens with battery , magnetic flux meter 0500 tesla , tong tester clamp meter 0 100 a digital type , soldering iron set 25 watt 65 watt and 120 watt 230 volt set of 3 , temperature controlled soldering iron 50 watt 230 volt , thermometer digital 0 degree c 150 degree c , sun shine recorder , weather monitoring station to monitor and record unshine wind velocity temperature rainfall etc with software , solar cell based sunlight radiation meter for solar power measurement up to 2000 wsquare meter , magnetic compass , cut models of photo voltaic cell assembly , model of lead acid battery , lead acid battery set 12v 40ah 75ah , lead acid battery 12v 100 ah , solar simulator for solar cell characteristic study to study iv curve of a solar cell of minimum 2 watt under variable illumination temperature and suitable load , iv curve tester , sun path finder , solar energy trainer with grouping of solar cells to group series or parallel at least six solar cells each with minimum 2 w with suitable loads , solar tracker demonstrator kit to study manual and automatic control of 10 w solar panel in east west and northsouth andback , halogen lamp set with stand for illumination of solar panels in lab ac mains operated to provide 0 to 1000 watts per meter square , pedestal grinder double ended 300 mm , battery charger 0 6 9 12 24 48 v 30amp , solar photovoltaic module 10 w poly crystalline module , solar photovoltaic module 250 w , solar photovoltaic module 250 w thin film module , solar photovoltaic module 40 w poly crystalline module , solar photovoltaic module 5 w poly crystalline module , solar photovoltaic module 75 w amorphous silicon module , solar photovoltaic module 75 w mono crystalline module , solar panels 250 wp , solar charge controller with dusk to dawn automatic switching 12v 10a , solar charge controller with manual switch day lighting 12 v 10 a , array junction box for connecting 250w x 4 nos solar panel with dc fuse dc mcb and surge suppressor protection , solar lantern led type , solar lantern cfl type , solar lantern assembly sets , home light system 12 v dc with fm receiver led bulb and mobile charger as loads , solar cell kit , clinometer for angle measurement , spirit level for floor level check , anemometer for wind speed measurement , dc table fan 12 v , ac voltmeter mi 0 , providing and supplying of volt meter 0 30v , volt meter 0 100v , ammeter mc 0 1a , ammeter mc 0 5a , ammeter mc centre zero 0 20a , ammeter mc centre zero 050a , power factor meter , rheostat set 0 1 ohm 5 amp 0 10 ohm 5 amp 0 25 ohm 1 amp 0 300 ohm 1 amp set , ac energy meter single phase 10 a 240 v inductiontype , ac energy meter three phase 15 a 440 v induction type , kilo wattmeter analog , digital wattmeter 230 v 1 kw 50 hz , phase sequence indicator 3 phase 415 v , frequency meter 45 to 55 hz , dc led lamp set 3w 5w 10w set of 3 , dc pump 24 v , pwm controller , mppt charge controller , solar grid tied inverter demonstrator kit 300w kw

CTN :41938229

08 Apr, 2026 NA

Mumbai - Maharashtra

Tender For bid to ras supply of dynamic temperature control system along with its accessories

CTN :44774586

20 Apr, 2026 NA

Delhi - Delhi

Tender For supply of water level sensor (seepage) l-10 general specifications item : water level sensor (tank) 1. float shape: biconical eco- the sensor uses a biconical eco-shaped float for measuring water levels. 2. cable: neoprene- the cable of the sensor is made of neoprene material.3. service: waste water/sewage- this sensor is suitable for use in waste water and sewage applications. 4. contact rating: 8a, 250 vac- it has a contact rating of 8 amperes at 250 volts ac. 5. maximum temperature: 85 c- the sensor can operate in environments with a maximum temperature of 85 degrees celsius. 6.maximum test pressure: 3.5 kg/cm2- the sensor can withstand a maximum test pressure of 3.5 kilograms per square centimeter. 7. length of wire: 10 mtr- the sensor comes with a 10-meter long wirefor connecting to a control system. 8. number of floats: one- this sensor utilizes a single float for its level measurement. 9. terminal enclosure x cable entry: cast ai ip66 x pg11 cable gland- the terminal enclosure is made of cast aluminum (ai) and is rated ip66. it includes a pg11 cable gland for cable entry. 10. process connection moc x type: the material of construction for the process connectiondetermines th ecompatibility of the sensor with the fluid or medium in the tank. the moc should be stainless steel, brass, plastic, or other materials depending fluid in the tank. 11. system configuration:adjustable stopper - the sensor has an adjustable stopper as part of its system configuration. 12. pr. cn (pressure connection): 4" nb bs-10 t d- the pressure connection is a 4 & quot; nominal bore (nb) as per bs-10 table d standards. 13. moc (material of construction): pp (polypropylene) - the sensor is primarily made of polypropylene material. 14. pressure rating: 1 kg/cm2- the pressure rating for this sensor is 1 kilogram per square centimeter. 15. switch type: microswitch (1 spdt)- the sensor is equipped with a microswitch with a single-pole, double- throw (spdt) configuration. ]

Central Government/Public Sector

CTN :44747234

24 Apr, 2026 NA

Pune - Maharashtra

Tender For supply, installation, testing and commissioning of induction heater 2.6 kva with micro controller based control system having memory back up for different sizes of components for bearing bore diameter 20 to 300 mm & weight not exceeding more than 40 kgs having following standard accessories:- 1) horizontal yoke - 14 x 14 x 200 mm - 01 no 2) horizontal yoke - 20 x 20 x 220 mm - 01 no 3) horizontal yoke - 40 x 45 x 220 mm - 01 no 4) magnetic temperature probe - 01 no 5) pair of hand gloves, heat resistance - 01 pair, technical specifications required:- i) data storage - 1000 jobs ii) infrared remote 01 no iii) rewritable programmer for memory iv) error guide with alarm for reprogramming, to be procured only from past proven suppliers of same item in ir. (warranty period : upto 30 months from the date of delivery) [ warranty period: 30 months after the date of delivery ]

CTN :44213208

20 Apr, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For corrigendum : tender for supply of gasket for glacier filter gf600-11 , ltwater system components , rubber compensator -pn16dn50nbr , sleeve , rubber compensator sleeve , rubber compensating sleeve dn80 pn16 lf130 , screw , punched joint , gasket for glacier filter gf600-11 , collar screw , disc spring , set of cyclam seal , set of spare gasket o rings , o rings , ehaust gasket , special seal , he nut , he bolt , filter element , rsp bearing safety card , pt 100 converter with two threshold , ferquency preamplifier-engine speed , frequency preamplifier , 16 analog input card , rtd input filed module , fw temp regulator , fuse 10 38gg 10a , fuse 10 38 05a , filter 415v ac-ac 3ph 3w 16a , simple subbase , fuse 1a gq 10 38 , fuse 4a gq 10 38 , 2way 2pole without off selector sw , miniature circuit breaker , mcp 2p2a , 1 c10 sq mm lfh cable as per nes- 518 , 1 c10 sqmm lfh cable as per nes-518 , 1 c25 sqmm lfh cable as per nes-518 , 2c05 sq mm overall atc shielded with core , 4c075 sq mm overall atc shielded with core , 1c40 sq mm lfh cable as per nes-518 , emi filter type , emi gasket type 1516-00121-02 , dc-dc convertor24v63a150wip 19-36v , 3c 075 sq mm shielded unifle lfh cable , 6c 75 sq mm shilded unifle lfh cable , flashing lamp , horn , 4-20ma signal duplicator , dc-dc convertor24v63a150wip 19-36v , relays 2co 24 voe , relay socket , etherent switch , 4 co control relay , plc power supply , plc 3200 , selector sw , cable glands , terminals , 3c 4 sqmm shielded unifle lfh cable as per nes-518 , dc onoff switch , 4c 25 sqmm shilded unifle lfh cable as per nes 518 , 2c 10 sqmm shielded unifle lfh cable as per nes 518 , 4c 075 sqmm shielded unifle lfh cable as per nes 518 , 2c 15 sqmm shielded unifle lfh cable as per nes 518 , 53c 075 sqmm shielded unifle lfh cable as per nes 518 , plc 32di , 113c 075 sqmm shielded unifle lfh cable as per nes 51 , connection cable for 40 pin connector , communication cable , 18c 25 sq mm shielded unifle lfh cable as per nes 518 , 19c 15 sqmm shielded unifle lfh cable as per nes 518 , diode module30 input terminals 1 lamp test , 10c 25 sq mm shiielded unifle lfh cable as per nes 518 , double decker terminals , backplane etension cable 15m , lugs , plc cpume , plc 32al4-20 ma , line terminator , plc cpu-ethernet cable , me plc application software cd , standard backplane etender , universal scanner-1 , indicating lampannouciator , shock mounts , communication material set , push button white , plc software cd , plc programming cable , rack plate , plc panel fabrication , o ring bush , gasket , o ring an33 7pb 496 , joint , thermometric duct , prtransmitter-bourdon sedeme make 0-10 bar , pyrometric duct bank b , spring pack , pyrometric duct bank a , temperature sensor , sensor , speed sensor , epansion bellow , locking plate , gasket ring , gasket , locking plate , locking plate , drow sph rlr brg 10016552 , shim for wichita clutch , cap screw , cap screw , cap screw , cap screw , spring location pin , hex bolt m16x55 , external roto 5-8 hole 3 by 4 bsp , bearing bush , bearing bush , disc spring 22 x 11 2 x 1 25 , positive lock screw

CTN :44644420

21 Apr, 2026 NA

Pune - Maharashtra

Tender For portable flameproof rh and temperature control system as per spec no. hemrl/teg/perht/2025

CTN :44687365

18 Apr, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For tender for supply of trim sensor k2 , trim ind k3 , trimt display on pirit , temperature controller indicator pcb themccouple pcb 31 - pc , power supply smps 2 , bus coupler module , hmi screen 10 inch , pcb 1101-8 control pcb for solenoid shutdown , ac volt meter 96mm sq 0-500v ac , dc/dc converter module , backup power supply sub system , power supply pcb battery charger for da lcp mcr panel , 2 channel dc signal isolators , signal conditioning module , sig cond module i-p -9.6 to 20 ma o-p -10v sup24vdc , winding temp relay , governer moduld , annun.flasher pcb type 4501-2 , pressure controller indicator pcb type 7130 pr , over speed rpm sensing pcb type 5105-2 a b , bups voltage controlled rectifier pcb , analog isolator pcb , temp.measurement pcb , blackplane pcb , diode board , dc filter for noise suppression , push button 22.5 dia type 2af red , indicating lamp , pcb edge connector , ac volt meter 0-500v ac , mccb mccb dh 200 160 - 200 amps , variable resistor , pressure transmitter 4-20ma dc 0-10 bar , temp.probes pt100 , local monitoring & protection panel for aft da set lmpp a

CTN :44676418

11 Apr, 2026 36.00 Lacs

Kishtwar - Jammu And Kashmir

Tender For supply of gobardhan project affani block paddar : : - biogas digestor , biogas dome , biogas pipeline , biogas stove , technical support , temperature control system , iot system

Proportioner Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector