Latest protection relay Tenders | Government protection relay Tenders

Central Government / Public Sector

CTN :41540027

10 Sep, 2025 NA

Haldia - West Bengal

Tender For corrigendum : supply of 9040m25f34 procurement of different types of 7sr seimens protection relays

State Government

CTN :41713719

11 Sep, 2025 8.17 Lacs

Belonia - Tripura

Tender For providing and fitting fixing of electrical accessories, spare of panel board of different water supply schemes at different locations under dws sub-division, belonia during the year 2025-26. - providing and fitting fixing of spare contact kits without coil (l & t make) for auto star delta starter., b) ml-2 type., c) ml-1.5 type., providing and fitting fixing of standard operating coil (l & t make) for auto star delta starter., b) ml-2 type., c) ml-1.5 type., supplying and fitting fixing of 4 pole ac control contactor (nhd series) suitable for bch made starter (standard coil voltages are 24, 110, 220/240 & 380/415 v, ac hz)., supplying and fitting fixing of 3 pole power contractor (type-mnx) suitable for 10 hp to 25 hp motor.mnx-25 (for l&t made starter), supplying and fitting fixing of pneumatic timer pn type delay relay-electro pneumatic) suitable for delay of time upto 30 sec. (bch made)., supplying and fitting fixing electronic timer type st-100 (l & t make) suitable for 240/300/415v, 50 hz having ranges for 3-30 secs/12-120 secs., supplying and fitting fixing of single phase preventer on delay 2 sec off delay 7 sec 65 vac asymmetry., providing & supplying of kit-kat rewireable porcelain fuse (cut-out) carrier & base of havells made (delux quality)., a) 63 amps/415 volt, b) 100 amps/415 volt, supplying and fitting fixing of 3 pole power contractor (type-ml) suitable for 10 hp to 25 hp motor.type ml-2 (for l&t make starter), supplying and fitting fixing of thermal timer type gt-200 (l & t make) suitable for 230/250v, 360v, 400/440v, 50 hz for 5-18 secs., supplying and fitting fixing of thermal overload relays mn2 type (directly operated& direct mounting on mnx 9-40 contactor) of l & t made. (suitable for ml/mnx type)., a) for relay range 9-15 a., b) for relay range 14-23 a., c) for relay range 20-33 a., supplying and fitting fixing of thermal overload relays (directly operated& direct mounting on ml-2/3 contactor) having relay range 9-14a/13-21a of l & t made. (suitable for ml-2/ml-3 type)., supplying and fitting fixing of citation-m overload relays (direct mounting with built in single phase protection) having relay range of bch made., a) for relay range 8.9-13.5 a., b) for relay range 13.2-30.00 a/17.4-24.00 a., c) for relay range 22.00-30.00 a., providing and fitting fixing of 6 feet x 4 feet x 1 inch (thickness) gamair wood/ plywood pannel board for fitting fixing of electrical items, in/c 2 nos ms angle post ( size 2 inch x 2 inch x 9 feet ), nuts & bolts etc. for irrection of the same by 1:1.5:3 cement concrete casting ( 1 feet x 1 feet x 2 feet) below the ground level and painting two or more coats & plastic paint as per specification and direction of the engineer-in-charge., providing and fitting fixing 3 phase indicating lamp fiited with panel board with three different colour lamps with batten holder complete as per specification and direction of the engineer-in-charge., providing and fitting fixing heavy duty box type (resin filled) power factor correction capacitor l & t make etc. complete as per specification and direction of the engineer-in-charge.i) 5-15 kvar 440 v, supplying isi marked/ taparia make tools for water supply scheme., i) sly wrench, ii) screw driver, iii. pipe wrench, iv. plier, v. hexo frame with blade, providing and fitting fixing of moving iron type, range 0-500 v, 96 mm x 96 mm size ac volt meter ( l & t / ae make) with selector switch as a electrical instrument of the pannel board as per specification and direction of the engineer-in-charge., providing and fitting fixing of moving iron type, range 0-100/0-200 amp, 96 mm x 96 mm size ac amps meter direct reading type ( l & t / ae make) with selector switch and ct coil as a electrical instrument of the pannel board as per specification and direction of the engineerin-charge., providing and fitting fixing steel sheet enclosed switch fuse unit (suitable for din fuses), tripl

Central Government/Public Sector

CTN :41708209

27 Sep, 2025 NA

Bangalore - Karnataka

Tender For supply of soft starter panel with protection relay for 660v, 630 kw, 3 phase induction motor

Central Government And Public Sector

CTN :41477607

22 Sep, 2025 NA

Kaiga - Karnataka

Tender For corrigendum : supply of intelligent multi-criteria detectors for upgradation of fire protection system , manual call point for upgradation of fire protection system , zone monitoring unit for upgradation of fire protection system , monitor module for upgradation of fire protection system , relay module for upgradation of fire protection system , loop powered remote hooters for upgradation of fire protection system , repeat response indicator for upgradation of fire protection system , fas control panel having 8 loop capacity with redundant cpu , zone indicating panel for upgradation of fire protection system , fire alarm control panel having 2 loop capacity with single controller , lcps -bare cabinets for upgradation of fire protection system , standalone ac to dc psu-smps for lcps for upgradation of fire protection system , hand- switches, push buttons, indicating lamps for upgradation of fire protection system , loop powered-cpu motherboard- backplane- bus powered relay modules with at least 8 change over contacts for upgradation of fire protection system , spares for fas control panel min. one type of each card or 10 percentage whichever is more standalone psu etc. , spares for relays other loose components and modules. for upgradation of fire protection system , test meter for smoke detectors , smoke detector removal tool kit with 6 m collapsible-concentric rod , smoke detector testing tool kit , aerosol gas cans 250 ml , heat detector tester , 1 pair 1.5sq. mm overall shielded hrpvc insulated frls pvc sheathed un-armoured cable for upgradation of fire protection system , 5 pair individually shielded 1.5sq.mm hrpvc insulated frls pvc sheathed unarmoured cables for upgradation of fire protection system , 10 pair individually shielded 1.5sq.mm hrpvc insulated frls pvc sheathed unarmoured cables for upgradation of fire protection system , 19 mm flexible gi conduit for upgradation of fire protection system , supply of 25 mm rigid hot dipped gi conduit including accessories , supply of nickel plated double compression brass cable glands , other accessories mcbs sealing compound etc , installation and commissioning of the system for upgradation of fire protection system

Corporations / Associations / Others

CTN :41677267

22 Sep, 2025 NA

Ahmedabad - Gujarat

Tender For supply and installation of cleanroom facility - wall panel, ceiling panel , r-70 aluminium coving. (it includes 135 degree - 3 mtr 12 nos and r-70-26 rmtr) both coving, wall panel accessories to complete the installation of 48 sq mir panel., ceiling panel accessories to complete the installation of 22 sq mtr panel., air handling unit (classified). pre filter post filter.. cooling coil, heater-blower assy with drain pan, fine filter. (hepa filter 0.3 micron down to 99.997% efficiency shall be placed in terminal filter boxes in ceiling panel), recirculation type 10-15% fresh air. 85 to 90% recirculation, non cfc gas (like r-32/r-134 a/r410) cooled condensing unit with suitable accessories. (5.5 tr), refrigeration accessories., refrigerant copper piping with 19 mm thick nitrile rubber insulation on suction line and non-insulated liquid line, trays for copper piping etc. & all other accessories like expansion valve, hand shut off valve, dryer, sight glass etc., terminal filter boxes gel seal type with damper and ss grill and damper operating mechanism suitable for required qty, of air suitable for 610x610mm size filter 1000 efm capacity., hepa filter of h14 grade gel seal type 610 x610 mm, capacity 1000 cfm, terminal filter boxes gel seal damper and ss grill and damper required qty, of air suitable operatit for m size filter,, ira chan suitable, hepa filter of h14 grade gel seal type 450x450 mm., capacity 500 cfm, return air riser of 2.4 mtr to 2.7 mtr height with 10 micron filter, grill and volume control damper etc. suitable for iso class 8 clean room., return air control fire damper, air curtain 3ft width,, sheet metal ducting in 24g complete with tdf flanges, gaskets, nutbolts, stiffeners, supports with rtv sealant of higher gauge as per site requirement., thermal insulation-nitrile rubber 19 mm thk, thermal insulation-nitrile rubber 13 mm thk, fibre cloth & uv paint., dynamic garment cabinet with hepa filter h14 grade, blower assy, pre filter of 10 micron, uv light, fluroscent light, hanger, sliding/swing doors in aluminium/gl powder coating with glass, castor wheel, leveling bolt etc., electrical panel for ahu, condensing unit, heaters etc. with vfd, energy meter, mccb, contactor, relay, mcb, simer, temperature and humidity controller etc., electrical wiring with all accessories from control panel to air handling unit to condensing unit., display and control panel for hvac system., led light fixtures 600 x600 mm 36 watt, reputable company electrical cabling with all accessories for complete wiring of lab. mention design considering 3 to 4 equipment of single phase (upto 15 a) and 2 equipment of 3 phase (upto 15a)., pvc piping for draining the, dustry's re, from, ede, andling unit., cross over bench is ss304 1200 mm width x 500 mm height x 350 mm depth (approximate size), epoxy flooring 2mm thick, color as per choice., clean room compatible single leaf door with vision glass, door closer, hinges, push plate, drop seal, handle etc., m.s. structural support for ducting lines and compressors, vertical wall panel wherever require this includes fasteners, plates etc. as per required sizes., r-100 epoxy coving, color same as epoxy floor, validation & documentation., air quantities measurements, temperature, humidity, positive pressure, particle count and documentation like do, iq, oq & design, drawing etc.

Corporations And Associations And Others

CTN :41440215

15 Sep, 2025 NA

Hisar - Haryana

Tender For corrigendum : empanelment of manufacturer firms vendors in dhbvnl for 2 years or up to the date of validity of type tests whichever is earlier to supply the material in turnkey works, self-execution works etc. through contractors--, 12.5 mva, 33/11 kv power transformers, , 10 mva, 33/11 kv power transformers, , 33/ 0.433kv transformers, , distribution, , 11/ 0.433 kv transformers distribution, , 33 kv c&r and transformer panel with differential relay, , 33 isolators & 33 kv l&e switches, , insulators, , 33 kv polymeric disc insulator & pin insulator (polymeric/ porcelain along with fitting), , 11 kv polymeric disc insulator & pin insulator (polymeric/ porcelain along with), , lt insulators (polymeric/ porcelain along with fitting), , 33kv cable of all type, , 11 kv vcbs, , 33 kv vcbs, , 11 kv 400 a g.o. switches, , 11 kv cable of all type, , acsr rabbit (50mm²), acsr raccoon (80mm²), dog(100mm²) conductor, acsr leopard (130mm2), 150mm2 & panther (200mm2), , lt cable of all type except twin core armoured/unarmoured cables. twin core armoured/ unarmoured cables., , pcc poles, , 9 meter long (200 kg), , 11 meter long (400 kg), , copper control cables off sizes, , cable jointing kits, , 11 kv cable jointing kits, , 33 kv cable jointing kits, , metallic meter boxes, , 1 in 1 single phase metallic mcbs,, , 4 in 1 single phase metallic mcbs,, , 6 in 1 single phase metallic mcbs, , 20 in 1 single phase metallic mcbs, , 1 in 1 three phase metallic mcbs, , single phase lt distribution boxes, , three phase lt distribution boxes, , lightening & surge arrestors, , 11kv las, , 33kv las, , insulation piercing connector, suspension clamp, anchoring (dead end) clamp, eye hook, stainless steel strap and buckle, service clamp, , gl wire, stay wire, earth wire and barbed wire., , lt distribution panel board for substations, , 11 kv apfc capacitor bank panels for 33 kv substations, , cts & pts, , 33 kv cts, , 33kv pts, , 11 kv cts, , 11kv pts, , 11 kv ncts, , hdpe pipes, , battery & its charger, , 11kv rmus, , 33kv rmus, , 400, 500, 630 & 1000 kva, 11kv/0.4 kv compact sub-station, , 11 isolators &11 kv l&e switches

CTN :41706207

15 Sep, 2025 NA

Bardhaman - West Bengal

Tender For supply of item and service : : - m and l for 11 kv vcb aux switch for mechanism operated with mounting plate comma holding rod comma wire comma ferrul comma copper socket all as specified and as directed , m and l for 11 kv vcb trolly wire contacted to male female contact all as specified and directed , m and l for 11 kv vcb motor charging contractor for electrical operated all as specified and directed , m and l for 11 kv vcb under voltage trip relay with mounting plate comma wire comma socket etc all as specified and as directed , m and l for 11 kv vcb modification of mechanical operation all as specified and directed , m and l for 11 kv vcb modification of control wiring for trolly and panel all as specified and directed

CTN :41715050

16 Sep, 2025 NA

Kanpur - Uttar Pradesh

Tender For work of maintenance of 11 kv capacitor bank and related 11 kv control relay panel installed at different substation in the area of ae test 2 kesco kanpur

CTN :41715053

16 Sep, 2025 NA

Kanpur - Uttar Pradesh

Tender For work of maintenance of 11 kv capacitor bank and related 11 kv control relay panel installed at different substation in the area of ae test 1 kesco kanpur

CTN :41708333

15 Sep, 2025 NA

Visakhapatnam - Andhra Pradesh

Tender For supply of motor protection relay patt no. el4977b-g2-6030-4

Protection Relay Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government / Public Sector

State Government

Central Government/Public Sector

Central Government And Public Sector

Corporations / Associations / Others

Corporations And Associations And Others