Latest protection sleeve Tenders | Government protection sleeve Tenders

Central Government/Public Sector

CTN :41351887

11 Aug, 2025 NA

Gwalior - Madhya Pradesh

Tender For supply, fitment and testing of mechanical seal cartridge (mechanical seal+ seal plate +sleeve) & gasket for cphm jockey pump, pump type- 25/26a, pump no. 1789318553 o/a no. k0819 a1090/20, total head-88 meter, discharge- 11 cub. meter, mat code-43 size-25x50 mm, speed-2920 rpm, mfg-07/18, make-kirloskar brothers limited pune of hydrant system. to attend leakages as an d when required. dismantling of jockey pump from motor andafter readiness of pump, it should be fit ted at their location. [ warranty period: 6 months after the date of delivery ]

Central Government/Public Sector

CTN :41343703

27 Aug, 2025 11.63 Lacs

Ganjam - Odisha

Tender For supply of spares for warman make slurry pumps.--, clamp bolt with 1-nut, shaft sleeve, seal ring, discharge joint ring, intake joint ring, volute frame seal, frame plate liner insert, volute liner, shaft spacer, impeller, piston ring, stuffing box, clamp washer, frame plate stud with two nuts, frame plate liner stud with two nuts, cover plate, adjusting screw with 3 nuts and 02 washer, shaft sleeve o-ring, frame plate, impeller o-ring, lantern restrictor, gland (2 piece), gland bolt 1 nut, 1 washer, packing, labrinth locknut, grease retainer, labrinth, shim set, bearing seal

Central Government/Public Sector

CTN :41345200

27 Aug, 2025 11.63 Lacs

Ganjam - Odisha

Tender For supply of supply of spares for warman make slurry pumps under pac : - clamp bolt with 1-nut, part no - c012me62 , shaft sleeve, part no - c075c21 , seal ring, part no - c122r11 , discharge joint ring, part no - c2132ls01 , intake joint ring, part no - c2060s01 , volute frame seal, part no - c2125s01 , frame plate liner insert, part no - c2041a05 , volute liner, part no - c2110a05 , shaft spacer, part no - c117c21 , impeller, part no - c2147a05 , piston ring, part no - c108g02 , stuffing box, part no - c078g01 , clamp washer, part no - c011e63 , frame plate stud with two nuts, part no - c039me63 , frame plate liner stud with two nuts, part no - m10z3552l , cover plate, part no - c2013g01 , adjusting screw with 3 nuts and 02 washer, part no - c001me62 , shaft sleeve o-ring, part no - c109s10 , frame plate, part no - c2032hs1g01 , impeller o-ring, part no - c217s10 , lantern restrictor, part no - c118c23 , gland - 2 piece, part no - c044c23 , gland bolt 1 nut , 1 washer, part no - c045mc23 , packing, part no - c111q05 , labrinth locknut, part no - c061e62 , grease retainer, part no - c046d21 , labrinth, part no - c06210d81 , shim set, part no - c025p10 , bearing seal, part no - c08910s10

CTN :41101418

14 Aug, 2025 NA

Tiruvarur - Tamil Nadu

Tender For corrigendum : tender for supply of ranco operating thermostat-5 to 25 deg c , 1 /4 nut flare long neck , housing bearing centre , gasket set , clip valve suction , elbow , drier core&joint , l.p. switch (danfoss) , packing oil screen , valve discharge shut off , crankcase heater , lock ring , cr bolt , dowel pin discharge disc , pressure guage with cock (0-10 kg-cm) , high pressure switch (danfoss make) , nut flare 11/4 , 5f30 gasket set , discharge pressure gauge 2 5 dia 0 to 300 psi , allen keys , cut out salt water pressure , unloader spring , shaft seal , screw socket head cap , valve internal relief 300 psi , valve capacity control , oil pressure relief valve , crank case heater , discharge shut off 5h120 & suction shut off 5h80 , disc valve suction , spring valve lifter pin , pin valve lifter , sleeve unloader , discharge valve spring , bolt connecting rod , phase barrier , copper washer , low pressure cut out , rubber pad size 6 x6 x1/2thk , dv guide washer (lock washer) , crankcase heater l 6 long200 watts-2 , dv disc (duly deburred) , discharge shut off 5h120 & suction shut off 5h80 , v belt b68 , switch temp thermostat honeywell , suction pressure guage (0-150 psi) , t.p. contactor 200a , valve solenoid , shaft seal assy. 5h 40 , carbon ring for 5h40/121 , angle valve 1 /4 mpt x1/4 fx1/4 f , connecting rod o cap assy 5f , brg. con rod 5h , valve plate 5h , washer valve discharge guide lock , snap ring , seal cover plate , pin lock piston ring , casing heater crank case , crankcase heater 240 , dis valv guide assy , d v disc (duly deburred) , d. v. spring 5h40 , hex bolt m8x1x30 , seal shaft assy , oil pump bush 5h/5f

CTN :41186117

06 Aug, 2025 NA

Amritsar - Punjab

Tender For bid to ras supply of assy latch front driver rh , assy discharge hose , front door primary seal lh , fuel tank cork , rear wheel bearing inner , head light assy lh , shock abosrber assy , sleeve cylinder assy , door regulator lh , horn assy 12v , arm assy kick starter , wiper blade

CTN :41055729

09 Aug, 2025 NA

Panipat - Haryana

Tender For corrigendum : supply of screw driver solid 3.5 mm , screw driver solid 4.5 mm , self centring bone holding forcep 150 mm , self centring bone holding forcep 190 mm , self centring bone holding forcep 240 mm , reduction bone holding forceps 150 mm , reduction bone holding forceps 210 mm , osteotome fiber handle 10mm/15mm , chisel fiber handle 10mm/15mm , bone gauge s> 5 handle 10 mm/15mm , bone currette wolkman d/e small medium large , periostal elevators fiber handle 10 mm/12 mm , bone cutting forceps d/a straight 9" , plate broder small 3.5mm pair , bone nibblers forceps d/a straight 7" , bone nibblers forceps d/a straight 9" , self hetaining retractor small 8" , pointed reduction clamp large 100mm opening , pointed reduction clamp 200mm , pattella bone holding tong 240 mm , pattella bone holding ball tip (large) 100mm opening , wire cutter tc tip 10 , wire cutter cum plire cum hender 9" , wire bender z type , t-handle with chuck and key , wire passer medium (small) , hohman retractor small 5mm , hohman retractor small 15mm , hohman retractor small 20mm , lagen back retractor small , lagen back retractor medium , lagen back retractor large , jumbo cutter 14° ( change) , gigli saw handle in pair , depth gauge 3.5mm , depth gauge 4.5mm , netural drill guide tap and steeve 3.5mm/4.5mm , bone tap 3.5mm/4.5mm , soft tissue protection sleeve , large scale , lockirig pliers , towel clip , needle holder small , needle holder large , cats paw retractor small , bp handle 3no. /4no. . , electric plaster cutter , currette fiber handle small/middle/large , bending press , punch impactor , plaster spreader , lowmain's bone clamp medium , bone hook large+ small+ medium , counter sink 3.5mm and 4.5mm , nose plier , kocher forceps medium , kocher forceps large , bone lever small , bone lever medium , bone lever large , bone lever cobra , tissue protectiong sleeve bone spike , plate benders 4.5mm , plate holders , periosteal flap elevators straight & curved , drill bit titanium2.9; 3.5; 4.5 mm , artery forceps small , artery forceps medium , artery forceps large , alleys forceps , ladies forceps , right angle retractor small , right angle retractor medium , right angle retractor large , bone cutter , soft tissue scissor , soft cutter scissor , tooth forceps small , tooth forceps medium , plain forceps small , plain forceps medium , bone rasp , pliers for 2mm k wire , universal drill sleeve , centric eccentric drill sleeve , bone holder (small fragnent) , quick coupling t-handle , counter sink , screw driver 2.9; 3.5; 4.5; 5.5 , ostetome 4, 6, 10 mm , tappers 3.5mm , screw holder , bone distraction set , kidney tray small , kidney tray large , bowl small , bowl medium , kidney tray medium , bowl large , hammer , curette , gigli saw hook , bone nibbler , broad osteotome 10mm , bone hook large , periosteum elevator 6mm , bone holder (l/f) large , bone holder (l/f) medium , bone holder (l/f) small , flexible reamer shaft , reaming beads 8.5; 9; 9.5; 10; 10.5; 11; 11.5; 12; 12.5; 13mm , reaming device (aneumatic powered) , beads tray , quick coupling drill bits long 3.2 mm , quick coupling drill bits long 4/4.5mm , cannulated reamer (8mm, 9mm, 10mm, 11mm, 12mm, 13mm) , canal finder 7mm[ starting reamer] , awl (largesolid) , cannulated awl , extra drill bits 32mm , extra drill bits 4/4.5mm , extra drill bits 4mm , wire holder , tissue protection sleeve , hammer/mallet , wooden quick coupling handle , punch, round straight , flat spatula type , cancellous bone punch/ impector curved 6mm , cancellous bone punch/impector rectangle 6mm , hollow reamer , extraction bolt , quick coupling t- handle , drill bits 4.8mm , drill bits 3.2mm , drill bits 2 mm , l/f quick coupling screw driver shaft 4.5 mm , conical bolts , application/procedure plate (anodized alluminium plate) , centering npin , quick coupling centring pin handle for hollow reamer attachment , hammer fiber handle 500gm+ 250gm+ 300gm , reduction bone holding forceps 240 mm , sponge holder ,

Central Government And Public Sector

CTN :41275671

21 Aug, 2025 NA

Angul - Odisha

Tender For tender for supply of slurry pump spares : : - intake joint ring ptno g8060s01 , discharge joint ring pt no g8132ls01 , volute liner seal , shaft , shaft sleeve , shaft spacer , shaft sleeve ring warman slurry pump

Central Government And Public Sector

CTN :41281277

14 Aug, 2025 NA

Thane - Maharashtra

Tender For supply of spares for asw system self cleaning strainers e e - shaft sleeve with o ring , rear end bearing , front end bearing , worm planetary gear box , u-seal , shaft seal , control drain o ring , screen basket assembly , basket bearing , shaft , drive shaft o-ring , turn buckle assembly for outlet pipe , extraction arm , spool piece , control drain pipeline , spool piece connected between gear sealing assembly , debris outlet support tee plate , frm motor mounting frame with scs body , elbow connected with tie rods , gear sealing support tee plate , seal kit , soft plastic , dowel pin for sleeve-pin 12 x 40 lg , dowel pin for sleeve-pin 10 x 40 lg , screen basket bearing screw , sleeve with drum head bolt , intermediate flange stud , elbow to ddmv flange stud , front bearing screw , collection arm with spool pipe bolt , outlet disc to spool piece screw , debris discharge bearing nut , debris discharge bearing stud , m12 nut part no-21850 , gear sealing dummy bolt , rear bearing screw , sleeve center bolt , m12 nut part no-21329 , m10 nut part no-21342 , drive shaft flange nut , drive shaft flange stud , collection arm with spool piece nut , worm gear box to intermediate flange bolt , front bearing bolt , outlet disc mounting screw , control drain flange bolt , nut m20 , gear sealing drum mounting stud , gear sealing drum mounting nut , bolt-m8 x 15 , hex. socket grub screw , hex. socket cs screw , turn buckle upper and lower nut , bolt-m16 x 40 , nut-m16 , hex. soc. head cap screw- m6 , bolt-m20 x 45lg , turn buckle upper and lower stud

CTN :39038234

22 Aug, 2025 13.98 Crore

Gandhinagar - Gujarat

Tender For corrigendum : supply of goods, tools & equipmentforan international standard itotin operator advanced machine tools (oamt) tradeat iti suart, gujarat, india (package 4: oamt trade) - surface grinding machine , cnc machining centre , cnc milling tools for above machine , cnc turn centre , edm , cnc simulator , vertical-spindle five-axis machining centres , cnc tool pre setter , ss and sc centre lathe (all geared) with having minimum specification , universal milling machine with minimum specification , horizontal milling machine with minimum specification , vertical milling machine , universal tool and cutter grinding machine , cnc lathe machine , tool holders to suit the cnc turn centre , jig boring , gear hubber , gear shaper machine , power saw machine-hydraulic feed system , cylindrical grinder , power saw machine , pedestal grinder double end type. , radial drill motorized with tapping attachment , drilling machine pillar type with drill chuck & key. , slotter , double column planer , shaping machine , shaping machine , co-ordinate measuring machine , cnc wire cut edm (electrical discharge machining) , special tools and equipment , involutes gear module , surface plate , marking table , scribing block universal , v-block , combination set , spanner double ended metric , adjustable spanner , reduction sleeve morse taper , angle plate adjustable , oil stone , number drill h.s.s(parallel shank) , drill (parallel shank) , twist drills , drill chuck , centre drill , grinding wheel dresser(diamond) , grinding wheel dresser hunting type , c- clamp , c-clamp , tap & die set inbox metric pitch , reamer , reamer adjustable , machine vice , machine vice , machine vice , universal machine vice , universal table angle plate , taper shank twist drill set , shaper tool holder turret type , knurling tools (set of 3) straight and diamond , carbide tipped tools of different sizes and shapes (through away tips) , micrometer outside , micrometer outside , micrometer outside , digital micrometer outside , digital micrometer outside , digital micrometer outside , digital vernier calliper , micrometer depth gauge , dial vernier calliper , vernier height gauge , vernier bevel protractor with blade , bevel gauge , telescopic gauge , sine bar , inside micrometer , inside micrometer , dial test indicator , slip gauge set (normal set) metric , plug gauges , ring gauges , snap gauge , vernier caliper , cylindrical cutter , cylindrical cutter , side and face cutter , side and face cutter , side and face cutter , side and face cutter , equal angle cutter , equal angle cutter , equal angle cutter , t" slot , t" slot cutter , t" slot cutter , t" slot cutter , single angle cutter , single angle cutter , single angle cutter , single angle cutter , double unequal angular cutter , double unequal angular cutter , end mill cutter , concave cutter , convex cutter , corner rounding cutter , corner rounding cutter , slotting cutter , slotting cutter , slitting saw cutter , slitting saw cutter , slitting saw cutter , dove tail milling cutter parallel shank , dove tail milling cutter parallel shank , dove tail milling cutter parallel shank , dove tail milling cutter parallel shank , shell & end mill cutter , shell &end mill cutter , face mill cutter with inserted tip , face mill cutter with inserted tip , face mill cutter with inserted tip , involutes gear module , air conditioner split , dg set , air conditioner , wall charts, transparencies and dvds , air conditioner , steel rule , divider , centre punch , hammer ball pane , combination plier , file flat bastard , file flat 2nd cut , engineers screwdriver , file flat smooth , cold chisel flat , try square , straight edge steel , steel tape , soft hammer , sprit level , hammer ball pein , screwdriver, heavy duty , hammer lead , screwdriver , allen hexagonal keys , angle plate , solid parallel sine pair (different size) in metric , oil can pressure feed , file flat 2nd cut , file flat smooth , fi

State Government

CTN :41249845

13 Aug, 2025 84.52 Lacs

Banaskantha - Gujarat

Tender For supplying and providing spare parts for pumps(no 1,2 and 3) and induction motors at bhadath pumping station included in changa dantiwada pipeline project. - providing spares for horizontal split case pump make: wpil, rpm-750, discharge - 5100 cum/hr, head - 42 m no of stages – two and induction motor make-jyoti ltd. capacity- 750 kw at bhadath pumping station for changa dantiwada pipeline project, providing and supplying pump shaft including loading, unloading, freight unit approved rates, providing and supplying sleeve( line shaft) including loading, unloading, freight unit approved rates, providing and supplying bearing 6222 c3 including loading, unloading, freight unit approved rates, providing and supplying pump bearing housing loading, unloading, freight rates as per rate analysis no. 1, providing and supplying wear ring (impeller) loading, unloading, freight unit approved rates, providing and supplying wear ring (casing) loading, unloading, freight unit approved rates, providing and supplying pump impeller including loading, unloading, freight rates as per rate analysis no. 1, providing and supplying bearing nu 324 c3 including loading, unloading, freight unit approved rates, providing and supplying bearing nu 326 c3 including loading, unloading, freight unit approved rates, providing and supplying bearing 6324 c3 including loading, unloading, freight unit approved rates, providing and supplying isi mark di d/f sluice valves as per is:14846 (latest edition) of following class and diameter including all taxes, insurance; transportation, freight charges, octroi, inspection charges, loading, unloading.conveyance to departmental stores, stacking etc. complete. (pn-1.6 with manually operated through gear box, non rising valve) dia 1000 mm rates as per rate analysis no. 2, providing and supplying battery set with float cum boost charger 200 ah, 2 v dc, model- upst including all taxes, insurance; transportation, freight charges, octroi, inspection charges, loading, unloading.conveyance to departmental stores, stacking etc. complete. rates as per rate analysis no. 2

Protection Sleeve Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government And Public Sector

Central Government And Public Sector

State Government