Latest protection system repair Tenders | Government protection system repair Tenders

Central Government/Public Sector

CTN :41704768

15 Sep, 2025 22.30 Lacs

Gorakhpur - Uttar Pradesh

Tender For supply of provision of lighting arrangement for the watch tower along with solar system at kushinagar airport : : - design and sitc of off grid solar system of 1 kwp capacity along with suitable capacity inverter and 2 nos. of 150 ah solar tubular battery along with necessary module mounting structure & civil works like foundation etc. as required at site for upssf watch tower in operational area of airport., supply of 4c x 6 sq. mm xlpe insulated & pvc sheathed, armored aluminium conductor cable of 1.1kv grade as per is 7098 (part i) 1988 with up to date amendments etc. complete as required., laying and fixing of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size on wall surface as required.upto 35 sq. mm (clamped with 1mm thick saddle), laying of hdpe pipe upto size 50 mm complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required., laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size in the existing rcc/hume/metal pipe as required.upto 35 sq. mm, supplying and fixing of following way single pole and neutral, sheet steel, mcb distribution board 240 v, on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (but without mcb/rccb/isolator) 6 way, double door, supplying and fixing 6 amps to 32 amps rating, single pole, 240 volts, 10 ka, c curve, miniature circuit breaker suitable for inductive loads in the existing mcb db complete with connections, testing and commissioning etc. as required., supplying and fixing dp mcb 32 amps, double pole, rating, 240 volts, 10 ka, c curve, miniature circuit breaker in the existing mcb db complete with connections, testing and commissioning etc. as required., wiring for light point/fan point/ exhaust fan point/ call bell point with 1.5 sq.mm frls pvc insulated copper conductor single core cable in surface/ recessed steel conduit, with modulat switch, modular plate, suitable gi box and earthing the point with 1.5 sq.mm frls pvc insulated copper stranded conductor single core cable etc. as required.(group c), wiring for circuit/ sub-main wiring along with earth wire with 2x2.5 sq.mm+ 1x 2.5 sq.mm earth wire.sizes of frls pvc insulated copper conductor, single core stranded cable in surface/ recessed steel conduit as required., supplying and fixing suitable size gi box with modular plate and cover in front on surface or in recess, including providing and fixing 2 nos. 3 pin 5/6 amps modular socket outlet and 2 nos. 5/6 amps modular switch, connection etc. as required., supply of 20 watt led batten surface mounted suitable for operation on 230 volt,50hz ac supply, complete etc as required., supply of 400 mm, 2100 rpm wall mounting swinging fan suitable for single phase 230 volt, 50 hz ac supply complete with motor, capacitor, mounting clamps etc. with all accessories as required complete., installation, testing and commissioning of pre-wired led fitting luminaries etc. of all types (surface/recessed) & street lights complete with all accessories. directly on ceiling/ wall , including connection with 1.5 sq.mm frls pvc insulated, stranded, copper conductor single core cable with flexible conduits and coupler and earthing etc. as required., installation of wall mount fan in the existing opening including making good the damage, connections, testing and commissioning etc. as required.upto 450mm sweep., supply of led street light of minimum lumen output of 3600 lumen made up of pressure die cast aluminum housing with membrane filter and have ip66 optical as well as electrical compartment with wide operating voltage range of 230+/- 10 percentage complete with all accessories as required., providing & fixing 32/40 mm dia b class gi

CTN :40440317

09 Sep, 2025 NA

Ajmer - Rajasthan

Tender For corrigendum : supply of cable gland m50 x 1.5 with lock nut make lapp or eqv. , protective cable condut system make lapp hummel controlwell reputed make , b , c , d

CTN :41570442

11 Sep, 2025 NA

Burdwan - West Bengal

Tender For corrigendum : supply of operating system software (v2),office suite software (v3),security and protective software including antivirus

CTN :41687656

24 Sep, 2025 NA

Jalandhar - Punjab

Tender For supply of nbc overboot size 8 to 11 qty 270 pairs , 1 nbc butyl gloves total 270 pairs and 2 nbc gloves cotton inner qty 270 pairs , nbc respiratory mask , nbc integrated hood mask , nbc facelet , nbc decontamination suit , nbc first aid kit type a , first aid kit cw type b , nbc casuality bag half , nbc casuality bag full , decontamination solution in 20 ltrs hdpe total quantity 600 ltrs , water poison detection kit , autojet injector cum combopen , fire fighting protective suit romex material with compressed oxygen cylinder and airline breathing apparatus , resuscitator , chemical agent monitor , automated chemical agent detector and alarm , industrial portable gas chromatograph , fullers earth 5 kg container with pads , naps tablets sets , digital hand held vhf trans receiver set , safety torch , passive night vission goggles , portable generator set 3 kva , inflatable lighting tower , multi purpose decontamination system

CTN :41679060

23 Oct, 2025 NA

Delhi - Delhi

Tender For procurement of spares for rafale aircraft - propanol, grease, ferrule,metallic shielded cable,gro, vaseline tube100g, 3m-dp490, indicator light cap, loader c853, locking product, grease, rivet,solid, screw, washer, wire,nonelectrical, lock washer, gasket, gasket, gasket, screw, screw, gasket, segment,retainer-lpt, heat shield, screw, screw, screw, pre-formed packing, taxiing light bulb, taxiing/landing light glass cover, plastic polish, fuel pressurization filter cartridge, gasket, filter, protective cap, uit/su lock, equipped venting plate, equipped membrane, damper, cleaning compound , aircraft surface, corrosion preventive compound, water-displacing compound, lubricating spray, corrosion preventive compound, water-displacing compound, gasket, sealing and marking compound, filter element, hydraulic filter cartridge, hydraulic filter cartridge, sealing compound, adhesive, electrical insulating oil, pre-formed packing, pin,straight,headless, lubricating oil,weapons, czx m4 screw, nut, lock-wire, fitting,lubrication, screw, rivet,tubular, rivet,tubular, glue, plastic sheet, grease , aircraft, seal, packing with retainer, seal, screw fz m2,5x8, adhesive, insulating varnish,electrical, bulb, main undercarriage tire, nose undercarriage tire, pre-formed packing, o-ring, pre-formed packing, strap retaining pin, cap,protective,dust and moisture se, closure, grease , aircraft, lubricationg oil, weapons, bi-material seal, sealing compound, gasket, hydraulic filter, gun blast tube, valve,bleeder,hydraulic system, sealant, adhesive, packing with retainer, sealing compound, pre-formed packing, pre-formed packing, o-ring, pre-formed packing, pre-formed packing, pre-formed packing, pre-formed packing, o-ring, pre-formed packing, o-ring, o-ring

CTN :41507887

06 Sep, 2025 42.34 Lacs

Multi City - Karnataka

Tender For annual maintanance of water supply materials to water supply section in cmc hosakote limits - dia pvc tee 50mm, supply and delivery of galvanized mild steel tubes of 6mtr standard length heavy duty (c class) as per is 1239 (part-i) 1990 with latest amendments with isi mark (one end fitted with heavy duty collar and other end fitted with protective cover) 50 mm.dia, supply and delivery at site brand new best make pvc insulated cable of flat 3 core (sheathed) of nominal cross sectional area as per is 694-1990 with isi mark and as per its latest amendments.1x3x6 sqm., providing,supplying to work site, submersible pump set of 150mm dia suitable for bore well and confirming to is 803420003phase ss bowl & impeller with low volt motor as per specifications,as per necessary ammendments and instructions of engineer incharge of work. for 20.00 hp - 135 lpm 350 m 25 stg outlet dia 2.00, di elbow.6 inch, ms flange.4 inch, ms flange.3 inch, ms flunge.2 inch, sewage hose pipe.3/4 inch, gi pipe.3/4, solvent cement for ws, non return valve heavy duty.2 inch gm, gland packing batti.10 mm, pvc elbow.8inch, hemp rope., g.i pipe c class 33kg 2 inch, outdoor panel board box 5x3x1 feet french door lock double door lock system.18 gauge, g.i tap.3/4 inch, pipe wrench.24 inch, chiniki., lock.60mm, lead., providing and fixing di resilient seated soft sealing sluice valve of variouis dia. with body bonnet of ductile iron (di) conforming ti is-1865 with the latest amendments and of grade ggg 40/50, shaft of stainless steel, for sluice valve of pn -10.0 and 200mm, providing and fixing di resilient seated soft sealing sluice valve of variouis dia. with body bonnet of ductile iron (di) conforming ti is-1865 with the latest amendments and of grade ggg 40/50, shaft of stainless steel, wedge fully rubber lined with edpm seals of nbr and the valves should be vacum tight and 100% leak proof with face to face dimensions as per is 14846-2000 with the latest for sluice valve of for sluice valve of pn -10.0 and 150mm, providing and fixing di resilient seated soft sealing sluice valve of variouis dia. with body bonnet of ductile iron (di) conforming ti is-1865 with the latest amendments and of grade ggg 40/50, shaft of stainless steel, wedge fully rubber lined with edpm seals of nbr and the valves should be vacum tight and 100% leak proof with face to face dimensions as per is 14846-2000 with the latest amendments only. the stem sealing should complete for sluice valve of for sluice valve of pn 10.0 and 100mm, chain rinch.24 inch, end cap.8 inch, gm gate valve isi make.2 inch, c.i.pipe.6 inch, pikaxe ., axa blade., bolts and nuts.1/2 inch, bolts and nuts.3 inch, bolts and nuts.4 inch, bolts and nuts for valves., crow bar., grease. for ws, gi pipe.1 1/4 inch, g.i clamp set.2 inch, g.i plunge set.2 inch, g.i bore cap.2 inch, g.i pipe b class 29 kg.2 inch, pvc tail pieces.6 inch, pvc tail pieces.4 inch, pvc tail pieces.3 inch, pvc tail pieces.2 inch, pvc reducer.4 inch x 2.5 inch, pvc reducer,4 inch x 6 inch, pvc reducer. 3 inch x 2.5 inch, pvc reducer.3 inch x 6 inch, pvc reducer. 3 inch x 4 inch, pvc reducer.2 inch x 2.5 inch, pvc reducer.2 inch x 3 inch, pvc reducer 160 mm dia., pvc reducer 140 mm dia, pvc reducer 110 mm dia., pvc reducer 90 mm dia., pvc reducer 50 mm dia, supply and delivery at site special moulded variety pvc reducer as per is 7834/ 1987 and fabricated as per ig124/ 1984 with isi mark with its latest amendments, pvc saddle. 6 inch x 1/2 inch, pvc end cap. 6 inch, pvc collar.6 inch, pvc saddle.4 inch x1/2 inch, pvc end cap. 4 inch, pvc saddle.3 inchx1/2 inch, pvc end cap 3 inch., pvc saddle. 2.5 inch x1/2 inch, pvc end cap.2.5 inch, pvc saddle. 2 inch x 1/2 inch, pvc end cap. 2 inch, pvc m.t.a. 2 inch, pvc f.t.a 2 inch, xlpe 1.1 kv, or heat resistant pvc insulated, pvc exutruted inner seath armoured ltug cable25 sqmm, 4 core,, pvc reducer 75 mm dia., pvc reducer 63 mm dia., xlpe 1.1 kv, or heat resistant pvc insulated, pvc extruded inner seath a

CTN :41694714

16 Sep, 2025 NA

Howrah - West Bengal

Tender For supply of spinal needle, no. 25g, specification: a) technical specifications: quincke bevel spinal needle. transparent hub, to allow easy visualization of cerebrospinal fluid (csf). the hub should be big grooved , colourless , transparent with csf identification system (prism and magnifying lens inside the hub) for improved visualization of csf flashback needle core hub with lock to keep the surface of needle bevel joint well oriented fitted stylet to minimize tissue coring external diameter expressed in gauge and mm. for 25 g needle - 0.50 mm x 90 mm length colour code( orange) /external diameter: visible at the base of the spinal needle. components: needle, stylet and sheath. material: stainless steel needle and stylet without silicone. clear ridged polycarbonate hub. protective plastic sheath. size selected: 25g (0.50 x 90mm) black. disposable. sterile single pack initial sterilisation method: ethylene oxide gas standardisation eu mdr / ce 0318/ce 0050 compliant b) packaging and labelling: primary packaging: unit of use. one (1) spinal needle in an individual sterilised peel pack. labelling on the primary packaging: name and/or trademark of the manufacturer. manufacturer's product reference. type of product and main characteristics. if the packaging is not transparent, it must bear a diagram (preferably actual size) showing the essential parts of the product and indicating the position of the product in the packaging. the word

State Government

CTN :41496185

08 Sep, 2025 7.77 Lacs

Palakkad - Kerala

Tender For corrigendum : kerala water authority funds deposit supply and installationof lab equipments for maintaining quality standards in various schemes under p h division palakkad - supply of lab equipments to various wss and rwss under p h division palakkad, od114374/2025-2026:supply and installation of jar test apparatus with the specifications are (1). number of stirres - 6 minimum, (2). rpm- 25 to 200 rpm or better, (3). capacity of single stirrer unit- 1 l, (4). control -digital control (digital timer & r.p.m counter), (5). stirrer paddle material (with appropriate corrosion protective coating) - stainless steel, (6). power single phase (220 - 240 volts), (7). illumination -fluorescent tube ; llumination should not contribute heat to the system, (8). warranty period -2 years. etc; complete., od114368/2025-2026:supply , installation and calibration of digital nephelo turbidity meter with the specifications are ; (1). range : 0 to i000ntu , (2). range selection : manual /automatic , (3). resolution : 0.1 ntu or better , (4). accuracy : +or- 3% or better, (5). calibration : 4 points minimum (manual/auto selection) , (6). light source : led/tungsten halogen lamp , (7). detector : photodiode , (8). display : lcd/led , (9). power : 230v +or- 10 % , 50 to 60hz, (10). accessories: matching test tubes(4 nos minimum ) and light shield, l000ntu solution 500 ml minimum, (11). instrument manual with specification details(hard copy) , (12). warranty : 2 years for the entire instrument etc ; complete., od114367/2025-2026:supply , installation and calibration of bench top ph meter with the specifications are (i). ph - range : 0.00 to 14.00 ph or better, resolution : 0.01or better, accuracy : +or- 0.02 ph or better, calibration points : 3 points minirnum, buffer options : : standard buffers (ii). mv - range : 0 to +or- l999mv, resolution : i mv or better, accuracy : + or - 1 mv or better (iii). temperature - 0.0 to 99 degree c or better, resolution : 0.1 degree c or better, accuracy : + 0.5 degree c or better (iv). electrode qpecification: single junction ,body-plastic /unbreakable, gel filled electrode atc probe and electrode stand should also be provided. (v). meter features - 1) lcd i led display, 2) dual display of ph or mv with temperature , 3) with auto buffer recognition, 4) off set/slope should be displayed , 5) power 230v +or - 10%, 6) buffer solutions 7 .0, 4.0, 9.2 ph (100m1 minimum) should be provided, 7) should provide all accessories for smooth functioning of the equipment, 8) hard copy of user manual with instrument specification, 9) warranty: 1 year for entire insruments etc; complete., od114377/2025-2026:supply of laboratory equipments including electronic weighing balances,etc. with 2 year warrenty including conveyance charges, od114750/2025-2026:supply and installation of digital conductivity meter 308 with the specifications are (i). conductivity - 1). range : 0.1 us to 100 ms (6 decadic ranges) , 2). accuracy : +or - 1% of fs + or - digit. 3). resolution : 0.001 micro.s (ii). tds - range : 0.1ppm to 100 ppt (6 decadic ranges ), accuracy : + or - 1% of fs (iii). temperature - temperature : 0 degree c to 100 degree c( auto / manual ), resolution : 0.1 degree c. , accuracy : + or - 0.2 degree c. etc; complete with 2 year warrenty, od114370/2025-2026:supply of buffer solution for ph 4 and ph 7(500ml bottle)

corporations/Associations/Others

CTN :41408095

08 Sep, 2025 NA

Thoothukudi - Tamil Nadu

Tender For corrigendum : remedial measures by strengthening and protective coating in the rcc psc structures of coal jetty conveyor system from jt 1e towards west in short span 1 and long span 2 5 of conveyor 14 in red gate area north break water of voc port

State Government

CTN :41477705

09 Sep, 2025 NA

Chandrapur - Maharashtra

Tender For corrigendum : supply of providing of customised utility vehicle as per given specification , providing and fixing protective accessories as per department requirement of customised utility vehicle as per given specification , providing and fixing decorative accessories as per department requirement of customised utility vehicle as per given specification , proving licesing assistance from govt of maharashtra rto department of customised utility vehicle as per given specification , providing and installation of sound system for utility vehicle as per given specification , cat 6 cable for indoor use (q2) , cat 6 patch cord (q2)

Protection System Repair Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

corporations/Associations/Others

State Government