Latest protective coating Tenders | Government protective coating Tenders

Central Government/Public Sector

CTN :41689533

25 Sep, 2025 NA

Panipat - Haryana

Tender For supply of chemical and corrosion resistance special purpose protective coating

corporations/Associations/Others

CTN :41672354

23 Sep, 2025 NA

Kanpur - Uttar Pradesh

Tender For renovation and construction of shed and paver block work : - dismantling of old toilet block approx area 4 x6 sqm detail specification as per annexure a , clearing jungle of girth up to 50 cm measured at a height up to 3 m above ground level detail specification as per annexure a , earth work in excavation by mechanical means detail specification as per annexure a , demolishing brick work manually or by mechanical means detail specification as per annexure a , dismantling old plaster or skirting raking out joints and cleaning the surface for plaster at all height detail specification as per annexure a , removing and re fixing of m.s grill out side from middle wall to side wall including detail specification as per annexure a , providing and laying in position cement concrete of specified grade m 7 point 5 detail specification as per annexure a , 52 mm thick cc flooring with concrete hardener topping detail specification as per annexure a , p and f glass strips in joints of cement concrete floors detail specification as per annexure a , repairing of crack in flooring with help cement mortar with hardener and chemical detail specification as per annexure a , making plinth protection 50mm thick of cement concrete m1o detail specification as per annexure a , 15 mm cement plaster of mix 1 isto 4 cement coarse sand in wall and ceiling detail specification as per annexure a , repairing and maintenance of window with fabrication detail specification as per annexure a , repairing and maintenance of rolling shutter fabrication detail specification as per annexure a , repairing and maintenance of ms shutter fabrication of damaged work detail specification as per annexure a , renewing glass panes with putty and nails detail specification as per annexure a , clearing of roof by wire brush and joint of brick detail specification as per annexure a , providing and applying 20 mm thick water proof cement plaster detail specification as per annexure a , providing and laying in position specified grade of rcc m20 in foundation and up to plinth detail specification as per annexure a , providing and laying in position specified grade of rcc m20 in column detail specification as per annexure a , rcc work m20 in beams shelves chajjas lintels bands plain detail specification as per annexure a , centering and shuttering foundations footings bases of columns detail specification as per annexure a , centering and shuttering columns pillars piers abutments posts and struts detail specification as per annexure a , centering and shuttering lintels beams plinth beams girders detail specification as per annexure a , centering and shuttering suspended floors roofs landings balconies and access platform , steel reinforcement for rcc work including straightening cutting bending placing detail specification as per annexure a , brick work of class designation 7point5 in foundation and plinth cement mortar 1 isto 6 detail specification as per annexure a , brick work bricks of class designation 7point5 in superstructure above plinth level up to floor v cement mortar 1 isto 6 detail specification as per annexure a , half brick masonry bricks of class designation 7point5 in superstructure above plinth level up to floor v level cement mortar 1 isto 3 detail specification as per annexure a , structural steel work riveted bolted or welded in built up sections trusses and framed work detail specification as per annexure a , p and f precoated galvanised iron profile sheets zero point 5 mm total coated thickness with zinc coating 120 grams per sqm detail specification as per annexure a , 12 mm cement plaster of 1 isto 6 1 cement 6 coarse sand detail specification as per annexure a , 15 mm cement plaster of 1 isto 6 1 cement 6 coarse sand detail specification as per annexure a , cement plaster 1 isto 3 1 cement 3 coarse sand finished with a floating coat of neat cement detail specification as per annexure a , providing and laying integral cement based water proofing treatme

CTN :41657795

20 Sep, 2025 NA

Multi City - Uttarakhand

Tender For polypoxy protective coating on draft tube gates & blinding gates and protective coating works on parts/structure of centrifugal pumps

CTN :41657805

16 Sep, 2025 NA

Multi City - Uttarakhand

Tender For polypoxy protective coating works on intake gates of machine no.3.

corporations/Associations/Others

CTN :41408069

08 Sep, 2025 NA

Thoothukudi - Tamil Nadu

Tender For corrigendum : remedial measures by strengthening and providing protective coating in the rcc psc structures in conveyor 15 long span 11 16 upto jt 3e in red gate area north break water of voc port at echs areas

corporations/Associations/Others

CTN :41408095

08 Sep, 2025 NA

Thoothukudi - Tamil Nadu

Tender For corrigendum : remedial measures by strengthening and protective coating in the rcc psc structures of coal jetty conveyor system from jt 1e towards west in short span 1 and long span 2 5 of conveyor 14 in red gate area north break water of voc port

Central Government/Public Sector

CTN :41651115

20 Sep, 2025 NA

Baramulla - Jammu And Kashmir

Tender For providing of custom bid for services - application of surface protective hard coating on stay vanes, stay ring and spiral casing surface for two units at uri-ii power station

CTN :41420479

08 Sep, 2025 NA

Ranchi - Jharkhand

Tender For eddy current array (eca) testing along with supply of eca testing equipment for surface crack detection in lhb wheels and advanced mechanized intensive de- rusting and anti - rust coating of brake disc and caliper using special purpose machine (spm) during d3 attention in lhb coaches at hatia coaching depot.

State Government

CTN :41496185

08 Sep, 2025 7.77 Lacs

Palakkad - Kerala

Tender For corrigendum : kerala water authority funds deposit supply and installationof lab equipments for maintaining quality standards in various schemes under p h division palakkad - supply of lab equipments to various wss and rwss under p h division palakkad, od114374/2025-2026:supply and installation of jar test apparatus with the specifications are (1). number of stirres - 6 minimum, (2). rpm- 25 to 200 rpm or better, (3). capacity of single stirrer unit- 1 l, (4). control -digital control (digital timer & r.p.m counter), (5). stirrer paddle material (with appropriate corrosion protective coating) - stainless steel, (6). power single phase (220 - 240 volts), (7). illumination -fluorescent tube ; llumination should not contribute heat to the system, (8). warranty period -2 years. etc; complete., od114368/2025-2026:supply , installation and calibration of digital nephelo turbidity meter with the specifications are ; (1). range : 0 to i000ntu , (2). range selection : manual /automatic , (3). resolution : 0.1 ntu or better , (4). accuracy : +or- 3% or better, (5). calibration : 4 points minimum (manual/auto selection) , (6). light source : led/tungsten halogen lamp , (7). detector : photodiode , (8). display : lcd/led , (9). power : 230v +or- 10 % , 50 to 60hz, (10). accessories: matching test tubes(4 nos minimum ) and light shield, l000ntu solution 500 ml minimum, (11). instrument manual with specification details(hard copy) , (12). warranty : 2 years for the entire instrument etc ; complete., od114367/2025-2026:supply , installation and calibration of bench top ph meter with the specifications are (i). ph - range : 0.00 to 14.00 ph or better, resolution : 0.01or better, accuracy : +or- 0.02 ph or better, calibration points : 3 points minirnum, buffer options : : standard buffers (ii). mv - range : 0 to +or- l999mv, resolution : i mv or better, accuracy : + or - 1 mv or better (iii). temperature - 0.0 to 99 degree c or better, resolution : 0.1 degree c or better, accuracy : + 0.5 degree c or better (iv). electrode qpecification: single junction ,body-plastic /unbreakable, gel filled electrode atc probe and electrode stand should also be provided. (v). meter features - 1) lcd i led display, 2) dual display of ph or mv with temperature , 3) with auto buffer recognition, 4) off set/slope should be displayed , 5) power 230v +or - 10%, 6) buffer solutions 7 .0, 4.0, 9.2 ph (100m1 minimum) should be provided, 7) should provide all accessories for smooth functioning of the equipment, 8) hard copy of user manual with instrument specification, 9) warranty: 1 year for entire insruments etc; complete., od114377/2025-2026:supply of laboratory equipments including electronic weighing balances,etc. with 2 year warrenty including conveyance charges, od114750/2025-2026:supply and installation of digital conductivity meter 308 with the specifications are (i). conductivity - 1). range : 0.1 us to 100 ms (6 decadic ranges) , 2). accuracy : +or - 1% of fs + or - digit. 3). resolution : 0.001 micro.s (ii). tds - range : 0.1ppm to 100 ppt (6 decadic ranges ), accuracy : + or - 1% of fs (iii). temperature - temperature : 0 degree c to 100 degree c( auto / manual ), resolution : 0.1 degree c. , accuracy : + or - 0.2 degree c. etc; complete with 2 year warrenty, od114370/2025-2026:supply of buffer solution for ph 4 and ph 7(500ml bottle)

CTN :41507852

17 Sep, 2025 30

Yelahanka - Karnataka

Tender For corrigendum : sports items - volley ball size 5, sports material/throw ball, sports material/ludo, sports material/snake and ladder game set , sports material/building blocks, sports material/skipping rope, ss a set of 6 stumps and 4 bails product id-5116877-16369127074 with hard wood of light colour with resistance to splitting , length of stumps 71.1 centimeter and diameter of stumps is 3.59centimeter , length of bail 10.95 centimeter longer spigot bail and shorter spigot bail is (3.49 adn 2.06 centimeter) the bails when in position on top of the stumps shall not project more than 1.27 cm above them etc complete specifications, sg 1101-1200 gram english willow cricket bat ( leather ball) product id 5116877-70256336411 country of origin - india , material of blade is english willow with grade 1 , bat size and width (851mm x108mm) with cane handle weighing about 1101-1200gm , the number of grains on the bat is 4 to 5 maximum overall depth is 67 millimeter , edges measuring 40 millimeter with rubber grip and toe guard , face coating covered, putex cottin (9.5mtr volleyball net) product id -5116877-39153977505 country of origin - india materiral of net cord cotting and rope /cord to tie with post on both side consist of cotton , width of net is 1 meter , width of two fold band at top 7 centimeter , width of two fold band at bottom through which a rope is threaded 5 centimeter, width of two folded side band 5 centimeter , size of mesh ,10centimeter , breaking strength of cord, decathlon combination of colours as per buyers requirements synthetic leather volleyballl products id -511687778924680534 country of origin-vietnam and spherical shaped with synthetic leather , circumference measures 65 centimeter with 260gm weight and thickness of materiatl of case-1-2 millimeter and material inside bladder consist with rubber and linen stitching thread as per is 417 part 2 etc complete specification., unbranded hard plastic chess board,product id-5116877-76734188286,country of origin- india, material is cardboard , material of chess pieces - hard plastic , colour of chessboard is he colors of the 64 squares alternate in colour i.e light and dark squares. size ( length x width ) chess board is 32 centimeter , size of square in chess board is 4 centimeter , mass of chessboard ( gram ) is 5., unbranded rosewood carrom board, product id- 5116877-6488387477 , carrom playing surface material are lacquered plywood , size of playing surface (side of square) are 73.5 cm to 74 cm , thickness of playing surface (min) 8 mm , surface finish is completely smooth (carrom board shall be able to have at least three and a half runs of a normally smooth striker of 15 gms weight, when struck with the maximum force, from one of the base lines, to the opposite frame of the carrom board.), vigour tennikoit ring dotted ,product id-5116877-938851667086,country of origin- india, material is synthetic rubber ,outside diameter of ring ( in cm ) is 17.0 - 17.5,inside diameter of ring ( in cm ) is 11.0 - 11.5, thickness of ring ( in mm ) is 25 - 30, mass of the ring is 220gm , surface finish is dotted , colour is assorted colours , unbranded tennis ball type 1 ( fast ) 6.54 to 6.86 cm product id-5116877-96521739486,country of origin- india, type of ball shape in size - type 1 ( fast ) 6.54 to 6.86 cm material of felt is wool , colour of the ball is yellow , mass of the ball is 56.0 to 59.4 gram, material of the hollow core is rubber , construction hollow core covered with felt etc complete as per specification., yenox competitions colour badminton net brown , product id-5116877-30341992353, country of origin - india , material of net cord is nylon, rope /thread to tie with post on both sides contain polyethlene , length of net is 6100mm , depth of net is 760mm , width of tape at top is 75mm , size of mesh is 15mm and colour of net is brown etc compete specifications, shuttle racket 01, shuttle cock

Protective Coating Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

corporations/Associations/Others

corporations/Associations/Others

corporations/Associations/Others

Central Government/Public Sector

State Government