Latest psc pole clamp Tenders | Government psc pole clamp Tenders

Central Government/Public Sector

CTN :41119164

28 Jul, 2025 NA

Multi City - Multi State

Tender For retro-reflective shunt signal number plate as per annexure-i (page: 1-11 enclosed) 1. made up of 3mm thick acp sheet. 2. pressure sensitive type retro-reflective sheet high intensity grade white wi th imprinted number/alphabet in black with film thickness 0.3mm tolerance as per applicable without steel clamp as per drg. no. 19-d10 (enclosed) of indian railways signal engineering manual june -2021. make-3 m/avery dennison/dm or similar. note: 1. make brand is applicable only for retro- reflective sheet/tape a nd numbers/alphabet. 2.proof of purchase from oem and nabl certificate is required at the time of supply. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :41118273

06 Aug, 2025 NA

Ahmedabad - Gujarat

Tender For led tube light for electric locomotive illumination, 5 watt, 110 volt dc (min. dc 80v, max dc 150 v) with 500 mm, 2 core wire, 2 steel clamps f or ceiling or wall mounting, as per specification: (i) slim led type - smd 2835, lm 80 approved, 0.5 watt led, total 26 led's , (ii) dimension mm/inch (l x w x h): 235 x 22 x 36 / 9.25 x 0.86 x 1.41, (iii) colour temp. (cct) : 6500k (white light), (iv) luminous efficiency: 110 lm / watt, (v) beam angle: 120 degree, (vi ) cri (min): 80, (vii) storage temperature: -20 c to +75 c, (viii) operating temperature: - 10 c to + 65 c, (ix) service life: 50000 hrs @ 25c, (x) accessories: 2 nos. clamps for clamp mounting, wire for input supply or connector for input supply, (xi) housing material: pc + aluminum. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :41119129

25 Jul, 2025 NA

Ahmedabad - Gujarat

Tender For supply of set of additional safety sling for traction link, as per rdso drawing no. skel-5076, alt - 0. sheet no. 1 of 2 and 2 of 2. consisting of 06 items in o ne set: (i) steel wire rope dia 8 mm - qty- 2 numbers, (ii) u-bolt- qty- 8 numbers (iii) strap piece - qty- 8 numbers, (iv) spring washer b8- qty- 16 numbers, (v ) hex nut- qty- 16 numbers, (vi) l- clamp - qty- 4 numbers. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :41104504

06 Aug, 2025 NA

Pune - Maharashtra

Tender For supply of set of additional safety sling for traction link, as per rdso ms no.: rdso/2023/el/ms/0493 r ev.0 dtd 26-7-23 & rdso drawing no. skel-5076, alt - 0. sheet no. 1 & 2. set consisting of 06 items in one set: (i) steel wire rope dia 8 mm -02 nos, (ii) 'u'-bolt- 8 nos (iii) strap piece - 8 nos, (iv) spring washer b8- 1 6nos, (v) hex nut- 16 nos, (vi) 'l'- clamp- 4 no [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :41119010

16 Aug, 2025 NA

Bhopal - Madhya Pradesh

Tender For supply of stainless steel box type wall mounted liquid soap dispenser of capacity 500 ml. having seamless construction, equipped with stainless steel lid at top for refilling and mounting clamp screws with replaceable pump to dispense approx 2 to 3 ml per stroke as per drawing no. skt-2019/18/c [ w arranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :41114286

07 Aug, 2025 NA

Bokaro - Jharkhand

Tender For supply of plier 210 mm , side cutting plier 160-170 mm , external circlip pliers straight nose , internal straight nose circlip plier , manual flat insulated screw driver length 200mm blade dia 4 mm , manual flat insulated screw driver length 250mm blade dia 6mm , manual screw driver length 140mm blade dia 6 mm 2 in 1 , manual flat insulated screw driver length 300mm dia 8mm , manual flat insulated screw drive length 300mm dia 6mm , allen key set 1 mm to 10 mm , hexagonal socket spanner set 8 mm to 32 mm total 22 nos along with accessories , double ended spanner sets chrome plated 6mm to 32 mm total 12 nos , double ended ring spanner sets chrome plated 6mm to 32 mm total 12 nos , fan bearing puller 3 leg 4 inch , file half round bastard 12 inch , file half round bastard 6 inch , file round smooth 6 inch , batali 1 inch with pvc handle , batali 1.5 inch with pvc handle , chisel by cheni 140 mm , electrician knife 5 inch , electrician hammer with handle 100 gm iron , aluminium platform ladder 7 feet 6 plus 1 , scissor stainless steel blade and brass handlel 12 inch , drill bit set 1 mm to 13 mm total 25 nos , grinding wheel 105 mm into 1 mm into 16 mm , air blower steel body cap 1 point 5m3 min 235volt 350 watt full load amp 1 point 6 a , electric hand drill machine 750 plus watt with drill bit set 1 mm to 13 mm total 25 nos , torch , soldering iron 50 watt , neon bulb tester , hanging weighing machine digital weight capacity up to 50 kg , digital multi meter 3 one by two digit 1999 count auto ranging with big display auto power off 1000v ac and dc , digital clamp meter tong tester 3 three by four digit 3999 count 1000a ac auto ranging with frequency , line tester , digital earth resistance tester

Central Government / Public Sector

CTN :41118150

18 Aug, 2025 NA

Mancheshwar - Odisha

Tender For supply of steel wire ending clamp (90)(1131, 1361 & 1362) rdso spec. no. : ti/spc/ohe/fittings /0130-10/13-rev-1, rdso drawing no. steel wire ending clamp et/ohe/p/1131, ei/ohe/p/1361 & eti/ ohe/p/1362. [ warranty period: 30 months after the date of delivery ]

State Government

CTN :40855694

21 Jul, 2025 NA

Nawabganj - Uttar Pradesh

Tender For corrigendum : supply of tools and spares for track maintenance - air blower. make - bosch or similar brand, model - professional gbl 650 , l handle 3by4 inch square drive 2753. make- taparia or similar brand , joggle fish plate for uic 60 rail , torque wrench with ratched mechanics 70 nm to 340 nm. , portable track gauge calibration bench for sg 1435mm , p. way workshop kit. model tk-1 , p. way workshop kit. model tk-2 , rail wear measuring gauge rwg 2-02. , mechanical tool box for store work. make - taparia or similar brand , phawarh steel 215mmx230mm, 1.2 kg weight confirming to is 1559-1986 , hammer - 1 lb , hammer sledge - 5 kg , hammer keying - 5 lbs confirming to is 15841 , rail dolley for sg 1435mm. suitable for transporting rail and concrete sleeper , hammer drill machine with drill bits. , hand grinder 100mm. make - bosch or similar brand, model - professional gws 600 , tong rail for lifiting 60 kg rail, confirming to is 6000 of 1971, drg. no. y-25 , t-handle 3 by 4 inch sq. drive, no. 2733. make - taparia or similar brand , straight edge 1 mtr, pie or similar brand , special emergency kit for attending rail fracture , straight edge 10 cm. , c - clamp. make - pujara engineers or similar brand , tappered gauge. material - stainless steel , pick axe with handle , steel pipe wrench 610mm 24 inch length width 30 mm. , 12 inch by 30 cm steel ruler 1 mm thickness , double hexa deep socket 3 by 4 inch drive 39 mm size. , socket 3 by 4 inch sq impact deep 36mm size. , rail roller heavy duty for leading of rail panel. , rail jumper 2 m long. material - copper , tommy bar confirming to is 704 , rail thermometre magnetic base pen type , electronic toe load measuring device. , retro reflective banner flag with clamps , halogen lamps with stand 500 watt , handle for keying hammer. size 70cmx4.5cm , handle for wooden phawrah. size 80cmx4.5cm , hand bambo for rake ballast. size 1.75mx4.5cm , continuous rail thermometer pie or similar brand , impact wrench. make - makita or similar brand, model - tw1000 , j clamp for ballastless track. make - pujara engineers or similar brand , taparia or similar brand bench vice fixed base 100mm

CTN :41115412

28 Jul, 2025 NA

Gurdaspur - Punjab

Tender For supply of 40 mm x 40 m y type pipe structure of 7 feet with 1 feet 40 mm x 5 mm angle with installation , 8 feet 40 mm x 5 mm angle for horizontal support with installation , center stand spring 3 mm with installation , hinges of 50 mm thickness with 12 mm hole with bolt 6 inch , horizontal round plain bar fixed in mesh with installation , steel wire of 10 mm x 10 feet with installation , stallion winch with smooth pulling feature with installation , steel u clamp , 1 feet x 1 feet u structure of 40 mm x 5 mm angle frame for hing with installation , 50 mm x 50 mm galvanised interlocked mesh of 9 feet x 7 feet with installation , nut bolts 12 mm x 50 mm , abrasive cutting wheel 4 inch , 10 no welding rod , paint

CTN :40824780

19 Jul, 2025 NA

Jhansi - Uttar Pradesh

Tender For corrigendum : supply of expendabe stores - jointing compound sr 998 , multipurpose sealant , wire steel mild annealed 1 60mm , insulation tape , torsion bar tape , compound jointing anabond , feviquick adhesive , d clamp , jointing sheet , clamp patti , clamp pin , alluminium washer 14mm , alluminium washer 17mm , alluminium washer 24mm , copper washer 14mm , iron washer 14mm , nut and bolt 10mm , valve grinding paste fine , locktite cd av 250 , thread tape

Psc Pole Clamp Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors