Latest ptfe liner Tenders | Government ptfe liner Tenders

Central Government/Public Sector

CTN :45091989

19 May, 2026 NA

Perambalur - Tamil Nadu

Tender For supply of spheribloc (imported make only) for axle guide link/tm torque arm for wap7 locos and gear case toque arm as per rdso spec.no. rdso/2007/el/spec/0051/rev.3 and abb drg.no ia016-00005 rev.3. (clw drg.no.1209.01.215.005), similar to bhc part no. 2-0080-604/10004768. [ warranty period: 30 months after the date of delivery ]

CTN :45065815

11 May, 2026 4.21 Lacs

Baran - Rajasthan

Tender For requirement of spares and one unit of power take of units pto make m/s syall engineering for both fire tenders. - heavy duty full torque pto units , suitable for fitment in fire tender on al, 1616 chassis having gear ratio of 1:1.27 x input, at ctpp, chhabra. , complete removal of existing pto unit, and complete fitting and testing of 01no. performance of new installed pto at ctрр, chhabra. , spare for heavy duty full torque pto units fitment in fire tender on al, 1616 chassis havin 1:1.27 x input, complete removal of existing , transmission shaft top , counter shaft , main shaft bottom (out put) , sliding gear , intermediate gear , main drive gear (in-put) , sliding dog , selector spindle top , selector spindle bottom , selector fork top , selector fork bottom , selector spring , selector ball 10mm , end cap , oil seal housing bottom (output) , oil seal housing top (output) , front bearing up support (output) , distance piece-lon (counter shaft) , oil level pipe (dip) , oil dip stick , retaining washer (10x6x56) , retaining washer (10x6x45) , selector top arm , selector arm bottom , rajkaj ref , control lever , cooling coil , sleeves , union nuts of brass , input flange coupling , output flange top/coupling , circlip plain inner (85x3) , circlip inner (100x3) , circlip inner (90x3) , circlip inner (62x1.72) , circlip inner (47x1.75) , circlip outer (45x1.75) , circlip inner (45x1.75) , dowel pin (8x30)

Central Government And Public Sector

CTN :45050237

30 May, 2026 NA

Bhilai - Chhattisgarh

Tender For supply of hand torque multiplier with straight reaction arm as per the technical specification uploaded as annexure-i. [ warranty period: 30 months after the date of delivery ]

CTN :45027069

15 May, 2026 NA

Delhi - Delhi

Tender For supply of lock nut for dt car front bogie overhauling of rs-2 "a) lock nut for radial arm, qty = 16 nos, prevailing torque type (thread type/thread: m20, pitch: 2.5, grade 8) surface protection: a3c (iso 4042) or lanfranco part no: m20-8-a3c. cf 00-040fp6 or bt part no: 100104344 or bufab part no: ag183459-01 b) lock nut for anti roll bar foundation bracket, atp bracket, qty: (8+8)=16 nos, prevailing torque type (thread type/thread: m16, pitch: 2 , grade 8)surface protection: a3c (iso 4042)or lanfraco part no: m16-8-a3c cf 00-040fp6 or bt part no: 100104343 or bufab part no: ag183459-02 c) lock nut for primary vertical damper, secondary vertical damper, bogie to axle earth cable, qty: (16+08+01)=25 nos, prevailing torque type (thread type/thread: m12, pitch: 1.75 , grade 8) surface protection: a3c (iso 4042).or lanfranco part no: m12-8-a3c cf 00-040fp6 or bt part no:100104342 or bufab part no: ag183459-03 d) lock nut for lateral buffer, levelling rod, qty= (08+06)=14 nos, prevailing torque type (thread type/thread: m10, pitch: 1.5 , grade 8) surface protection: a3c (iso 4042).or lanfranco part no: m10-8-a3c cf 00-040fp6 or bt part no: 100104341 or bufab part no: ag183459-04 e) lock nut for brake caliper, qty= 16 nos.(thread type/thread: m20, pitch: 1.5, grade 10, standard iso 10513), surface protection: a3c (iso 4042), material dimension: as per sample (approx. dimension attached as per annexure: a) or bt part no: 100107935, f) lock nut for cleat for bogie to axle earth cable, qty=01 no, prevailing torque type (thread type/thread: m8, pitch: 1.25, grade 8) surface protection: a2c (iso 4042).or lanfranco part no: m8-8-a2c cf 00-040fp6 orbt part no: 100104340 or bufab part no: ag183459-05 note: 1) prevailing torque as per iso 2320. 2) mechanical properties as per iso 898-2. 3) certificate of genuinity required from vendor." ]

Central Government / Public Sector

CTN :44968654

13 May, 2026 NA

Secunderabad - Telangana

Tender For supply and commissioning of light weight torque multiplier along with specialized reaction arm for torque enhancer, modelno:ht92-25 awur of m/s norbar make or to model no.dvv-40z/part no.2653087 of gedore make or its equivalent in bosch/chicago pneumatics or similar. technical specification details attached" [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :44959056

21 May, 2026 NA

Ernakulam - Kerala

Tender For supply and commissioning of cordless torque wrench of torque range 300-2200 nm along with reaction arm, as per the specifications enclosed. [ warranty period: 30 months after the date of delivery ]

CTN :44687384

30 Apr, 2026 NA

Allahabad - Uttar Pradesh

Tender For corrigendum : tender for supply of auma make actuator and spares for c and i and electrical dept d d -auma actuator model sar12e22 ctrl type , auma make actuator , model no. -sar6e22 , e-pac auma for sar12e22 /sar6e22/sar6e32 , analog pft for auma actuator ewg type , pwr suply auma e-pac reg acutator , cont module auma e-pac regu actuator , ssr auma regulating actuator , auma actuatr type sar6ee32 for cad , auma reduction gearing unit pn-s-rgc.017 , auma actu reduction gear unit for sa6 , auma clutch fork assly sa3 and 6 pn-z230.018 , auma actu clutch fork assem sa12-sa15 , auma declutch tripping arm pn- z220.047 , return spring common for all actuator sa , auma worm shaft assly sa6 pn-s-wsa.002 , auma worm shaft assly sa12 pn-s-wsa.003 , auma bearing flangesa3-6-12-15-50-60-100 , auma actuator bearing flange commmon f , auma hollow drive shaft assly sa12 and sa15 , auma actuator hollow drive shaft assly. , auma compr spring sa3 and sa6 pn-z220.036 , auma compr spring sa12 and sa15 pn-z220.034 , auma clutch ring for sa3 and sa6 pn-z205.024 , auma clutch ring for sa12 and 15 pn-z205.022 , auma actuator motor pinion for model sa6 , auma actuator motor pinion for model sa1 , auma actuator spur gear for model sa6 , auma actuator spur gear for model sa12 , auma handwheel for model sa3 and sa6 , auma handwheel for model sa12 and sa15 , auma limit sw drive assly pn-s-lsd.001 , auma torque sw drive assly pn-s-tsd.001 , auma actu sa12 torque switch drive assly , auma limit sw counter gear pn-s-wsd.003 , auma thrust brg with race sa3-sa6 , auma thrust brg with race sa12-sa15 , auma drive socket for sa3 and sa6 , auma actu drive sockt type e sa21- sa15 , auma limit sw for sa3-6-12-15-50-60-102 , auma torque sw sa3-6-12-15-50-60-103 , complete auma actuator model sar6e2+epac , thermalo/l relay no k214.749 for e-pac o , auma actu sa3 torque switch drive assly. , auma actu sa15 torque switch drive assly , auma torque sw drive assly sa25 , auma torque sw drive assly sa60 , auma reduction gear unit pn-s-rgc.051 , auma reduction gear unit pn-s-rgc.055 , auma reduction gear unit pn-s-rgc.067 , auma reduction gear unit pn-s-rgc.061 , auma clutch ring for sa25-30-50-60 , auma clutch ring for sa100 pn-z205.255 , auma clutch fork assly pn-z230.019 , auma clutch fork assly sa100 pn-z230.020 , auma worm shaft assly sa3 pn-s-wsa.001 , auma worm shaft assly sa25 pn-s-wsa.005 , auma actu worm shaft assembly for sa30 , auma worm shaft assly sa50 pn-s-wsa.016 , auma worm shaft assly sa60 pn-s-wsa.007 , auma actu motor pinion for model sa100 , auma hollow drive shaft assly sa25-30-50 , auma limit sw drive assly pn-s-lsd.002 , auma limit sw drive assly sa100 , auma circlip set for sa25-30-50-60 , auma circlip set for sa100 pn-k200.376 , auma stem nut type-a sa3 and sa6 pn-z202.457 , auma stem nut type-a sa12-15 pn-z202.443 , auma stem nut type-a sa100 pn-z202.642 , auma spur gear for sa3 pn-z205.746 , auma actuator spur gear for model sa15 , auma thrust brg with race sa25-30-50-60 , auma spur gear for sa50 pn-z205.201 , auma spur gear for sa100 pn-z205.203 , auma bearing flange sa100 pn-z202.057 , auma actuator bearing lock nut commmon , auma actuator bearing lock nut. commmon , auma actuator bearing lock nut sa100 , control module no k215.560 for e-pac of , auma torque sw drive assly pn-s-tsd.017 , auma reduction gear unit pn-s-rgc.071 , auma thrust brg with race for sa100 , auma thermal o/l relay no k210.274 epac , aumathermalo/l relay no k210.275 epac , auma thermal o/l relay no k210.276 epac , auma thermal o/l relay no k214.495 epac , auma thermal o/l relay no k214.496 epac , auma torque sw drive assly for sa100 , auma ind motor 1.1kw 4p frame- f90 , auma ind motor 1.1kw 2p frame- f71 , auma ind motor 2.2kw 4p frame-f90 , auma ind motor 2.2kw 2p frame-f90 , auma ind motor 1.25kw 2p frame-f90 , auma ind motor 2.5kw 2p frame-f90 , auma ind motor 4kw 2p frame-f90 , auma ind motor 5kw 2p frame-f112 , auma ind motor 7.5kw 2p frame-f112 , rev. contcr auma sa1

Central Government/Public Sector

CTN :44774197

28 Apr, 2026 NA

Danapur - Bihar

Tender For corrigendum : supply of analog electrician tool kit, availability of multimate of standard make with tool kit : yes, typeof multimeter provided with kit : analog, make of multimate : others, if multimate is of others make , specifythe make : others, dc voltage range for multimate in volts upto 200v, dc current range for multimate in amp : upto 2 ma, ac voltage range for multimate in volts : upto 200 mv, ac current range for multimate in amp : upto 2 ma, resistance measurement range in ohms : upto 20 ohms, screw driver with individual handle and arm provided in kit : 5, arm diameter of screw driver in mm : 3 mm,3.5 mm,4 mm,5 mm,6 mm,8 mm,10 mm, arm length of screw driver in mm : 50,75,100,125,150,175,200,250,300, hexagonal socket wrench with bits : yes, precision bit sets : yes, ratchet hand screwdrivers(reversible high torque type ) : yes, " allen key set of 12 pieces (2mm to 14mm), provided in tool kit " : yes, combination plier in kit confirming to latest is : yes, number of combination plier provided with tool kit : 1,2,3, size of combination plier ( highgrade forged steel with insulated handle ) confirming latest is : 6 inch, make of combination plier : taparia, number of flat nose plier : 1,2,3, size of flat nose plier in inch : 6, no of steel rule 30 cm inch and metricprovided in the kit : 1,2,3, wire stripper or wire cutter : yes, size of wire stripper or wire cutter in inch ( high grade forged steel )confirming to is 5087-1969with latest amndmnt : 6 inch,8 inch, ball pin hammer with rubber handle : yes, ball pin hammer with rubber handle in kgs : 0.5, torch ( single set) 9 pearl led flashlight : yes, masonary drill bit : yes, file provided in tool kit : yes, branded s-plugs ( set of 30 pieces ) : yes, knife blade of high quality material : yes, availability of hand drilling machine : yes, warranty : 1, make :tap aria, bosch, ibell [ warranty period: 30 months after the date of delivery ]

CTN :44948019

13 May, 2026 NA

Gorakhpur - Uttar Pradesh

Tender For supply of set of bolt size m24 x 105 (galvanised) & m24 x 100, grade 8.8, is:1364/part 1/2002 for torque arm (02 items 02 nos). [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :44948785

11 May, 2026 NA

Bhusawal - Maharashtra

Tender For supply of torque arm as per abb drg. no.ia 011-00370-rev-2 and clw drg. no. 1210-01-118-012 alt-1 for wap-5 locos. [ warranty period: 30 months after the date of delivery ]

Ptfe Liner Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government And Public Sector

Central Government / Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector