Latest puff panel Tenders | Government puff panel Tenders

Co-operative

CTN :41710917

11 Sep, 2025 4.03 Lacs

Gurgaon - Haryana

Tender For supply of puff panel with installation

Central Government/Public Sector

CTN :41704768

15 Sep, 2025 22.30 Lacs

Gorakhpur - Uttar Pradesh

Tender For supply of provision of lighting arrangement for the watch tower along with solar system at kushinagar airport : : - design and sitc of off grid solar system of 1 kwp capacity along with suitable capacity inverter and 2 nos. of 150 ah solar tubular battery along with necessary module mounting structure & civil works like foundation etc. as required at site for upssf watch tower in operational area of airport., supply of 4c x 6 sq. mm xlpe insulated & pvc sheathed, armored aluminium conductor cable of 1.1kv grade as per is 7098 (part i) 1988 with up to date amendments etc. complete as required., laying and fixing of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size on wall surface as required.upto 35 sq. mm (clamped with 1mm thick saddle), laying of hdpe pipe upto size 50 mm complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required., laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size in the existing rcc/hume/metal pipe as required.upto 35 sq. mm, supplying and fixing of following way single pole and neutral, sheet steel, mcb distribution board 240 v, on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (but without mcb/rccb/isolator) 6 way, double door, supplying and fixing 6 amps to 32 amps rating, single pole, 240 volts, 10 ka, c curve, miniature circuit breaker suitable for inductive loads in the existing mcb db complete with connections, testing and commissioning etc. as required., supplying and fixing dp mcb 32 amps, double pole, rating, 240 volts, 10 ka, c curve, miniature circuit breaker in the existing mcb db complete with connections, testing and commissioning etc. as required., wiring for light point/fan point/ exhaust fan point/ call bell point with 1.5 sq.mm frls pvc insulated copper conductor single core cable in surface/ recessed steel conduit, with modulat switch, modular plate, suitable gi box and earthing the point with 1.5 sq.mm frls pvc insulated copper stranded conductor single core cable etc. as required.(group c), wiring for circuit/ sub-main wiring along with earth wire with 2x2.5 sq.mm+ 1x 2.5 sq.mm earth wire.sizes of frls pvc insulated copper conductor, single core stranded cable in surface/ recessed steel conduit as required., supplying and fixing suitable size gi box with modular plate and cover in front on surface or in recess, including providing and fixing 2 nos. 3 pin 5/6 amps modular socket outlet and 2 nos. 5/6 amps modular switch, connection etc. as required., supply of 20 watt led batten surface mounted suitable for operation on 230 volt,50hz ac supply, complete etc as required., supply of 400 mm, 2100 rpm wall mounting swinging fan suitable for single phase 230 volt, 50 hz ac supply complete with motor, capacitor, mounting clamps etc. with all accessories as required complete., installation, testing and commissioning of pre-wired led fitting luminaries etc. of all types (surface/recessed) & street lights complete with all accessories. directly on ceiling/ wall , including connection with 1.5 sq.mm frls pvc insulated, stranded, copper conductor single core cable with flexible conduits and coupler and earthing etc. as required., installation of wall mount fan in the existing opening including making good the damage, connections, testing and commissioning etc. as required.upto 450mm sweep., supply of led street light of minimum lumen output of 3600 lumen made up of pressure die cast aluminum housing with membrane filter and have ip66 optical as well as electrical compartment with wide operating voltage range of 230+/- 10 percentage complete with all accessories as required., providing & fixing 32/40 mm dia b class gi

corporations/Associations/Others

CTN :41430849

11 Sep, 2025 NA

Thane - Maharashtra

Tender For corrigendum : tender for purchase of pathology materials-reagents and consumables for nmmc hospitals (for year 2025-26-2026-27) - 75 test cartridge for blood gas analyser gem premier 3000, bulb for microscope 6 v / 20w, capillary for bt-ct ( 1 x 100 no), copper sulphate powder (500 gm), coverslips 22x22mm x10 gm, coverslips 22x30mm x10 gm, diamond marker ( glass cut pencil), distilled water biochemistry gr ( 1 x 5000 ml), e.s.r. pipette western green (glass), e.s.r. stand (12 tube metal body, press button type ), falcon tube 50 ml sterile, fields stain a ( 1 x 500 ml), fields stain b ( 1 x 500 ml), filter paper ordinary ( 1 x 100 sheet), handiplast (round) for blood donors, heam test kit ( 1 x 200 test), heavy liquid paraffin oil (1x 500 ml), high power lens (40x) for labomed microscope, low power lens (10x) for labomed microscope, immersion oil ( 1 x 100 ml), lancet, lens cleaning paper ( 1 x 100), methanol based slide fixative ( 1 x 500 ml), micro pipette fix volume 10ul, micro pipette fix volume 50ul, micro pipette fix volume 100ul, micropipette fixed volume 1000 l, micro pipette variable volume 100-500ul, micro pipette variable volume 10-100ul, micro pipette variable volume 5-50ul, micro pipette variable volume 100-1000ul, micropipette non digital variable volume 0-100 ul, microscopic glass slides (1 x 50 slides), multichannel pipette, n/10 hcl (500 ml), neubaur chamber (bright line), oil immersion lens with adapter for labo/labomed microscope, phenyl crystal 99.5% (500 gm), sodium hypochlorite (5% diluted) ( 5 lit jar), sterile swab sticks for culture sensitivity ( 1 x 100 swab sticks), sulphuric acid 98 % ( 500 ml), temperature recording circular chart papers (-)100 c to (+)100 c, temperature recording circular chart papers (-)50 c to (+)50 c, temperature recording circular chart 0 c to 40 c, temperature recording pen, test tube 3 x 11mm, test tube 4 x 11mm, thermal paper roll (57 mm x 30 m) for printer (1kit = 03 roll), thermal paper roll (56 mm x 30 m) for printer (1kit = 03 roll), 50 mmx25mm ch 1000 lablles x 1 roll (for fully atomated urine analyser, 55 mm x 300 mts wax (for fully automated urie analyser), thermometer (-)10 c to (+)100 c, thermometer (-)100 c to (+)100 c, tips for micropipette 200 l yellow tips ( 1 x 1000 tips), tips for micropipette 500 l blue tips ( 1 x 1000 tips), tips for micropipette 1000 l, tourniquet, whatman filter paper ( 1 x 100 paper), retic stain (10 ml), litmus paper ( 100 numbers), coplin jar 60 ml capacity plastic material, coplin jar 60 ml capacity glass material, bariun cloride 500 ml, selvinoffs reagent 500 ml, fructose reagent 500 ml, dpx mountant 500 ml, grams stain kit, naoh (0.1 n) 500 ml, spirit lamp, semen diluting fluid (100 ml), leugols iodine 100 ml, tissue roll, giemsa stain(1x500ml), slide preservation box for 100slides, slide staining cradle, slide drying rack, slide rack, deionised water (5lit), wooden spatula, blood collection needle holder, multi sample needle 22 g, non vaccum blood collection tubes pet material edta (k3), 3-5 ml, rubber stopper & plastic cap of lavender colour, non vaccum blood collection tubes pet material fluorude 3-5 ml, rubber stopper & plastic cap of gray colour, non vaccum blood collection tubes pet material plain with clot activator, 3-5 ml, rubber stopper & plastic cap of red colour, sputum container( 30 ml transparant, pp material, screw cap.), urine & stool container 50ml with lid (specimen container), vaccum blood collection tubes pet material gel with clot activator tube 3-5 ml rubber stopper & plastic cap of golden/yellow colour, vaccum blood collection tubes pet material edta (k3),3-5 ml rubber stopper & plastic cap of lavender colour, vaccum blood collection tubes pet material fluorude , 3-5 ml rubber stopper & plastic cap of gray colour, vaccum blood collection tubes pet material plain tube with clot activator 3ml rubber stopper & plastic cap of red colour, vaccum blood collection tubes pet material sod

CTN :41705608

15 Sep, 2025 NA

Jammu - Jammu And Kashmir

Tender For supply of expendabe stores d d - web thick og 32mm , web thick og 25mm , web thick og 13 mm , seals metallic lead 10mm , sealing was gde i , s cotton thread white 500m tube , rivets snap head copper dia 3 x 20mm , pins cotter split steel 8.0mm x 80mm , pins cotter split steel 8.0mm x 71mm , pins cotter split steel 4.0mm x 32mm , pins cotter split steel 2.5mm x 80mm , jointing asb f comp gr 3.2mm thick , jointing asb f comp gr 1.6mm thick 100 x 100cm , flux soldering zinc chloride solution , flux soldering paste , fevicol sr 998 , dubbin protective , cork sheet thick 6.4mm , cork sheet thick 2.4mm , cork sheet 1.6mm thick , paper wrapping waxed 841mm x 100mtr , paper wrapping tissue 500mm x 750mm , paper wrapping reinforced with hessian , paper wrapping frat 1189mm x 100mm , paper wrapping 1189mm x100 mtrs , paper wrapping waterproof plaint 1189mm , packing asb braided yarn core rd 9.5mm , nails steel wire round 75mm x 2.8mm , nails steel wire round 75mm x 2.5mm , nails steel wire round 70mm x 3.15mm , nails steel wire round 45mm x 2.5mm , nails steel wire round 25mm x 2 mm , nails steel wire round 15mm x 1.6mm , nails steel wire round 125mm x 5.6mm , nails steel spike square shank 125mm , nails brad steel cut 20mm x 1.50mm , sewing cotton poly white 500 mtrs , razor disposable blade , wire copper soft for general purpose , copper rod round 6.3mm , wire steel mild bright 2.50mm , wire steel mild annealed 1.25mm , wire steel mild annealed 0.56mm , wire steel mild bright 1.25mm , wire steel mild annealed 4mm , rod welding copper 5.00mm , adhesive synthetic resin hardner , quick fix , steel bar carbon hot rolled round 40mm ) /bid number : gem/2025/b/6644081 * /dated: 04-09-2025 & & / bid document 1 / 32

Corporations / Associations / Others

CTN :41677267

22 Sep, 2025 NA

Ahmedabad - Gujarat

Tender For supply and installation of cleanroom facility - wall panel, ceiling panel , r-70 aluminium coving. (it includes 135 degree - 3 mtr 12 nos and r-70-26 rmtr) both coving, wall panel accessories to complete the installation of 48 sq mir panel., ceiling panel accessories to complete the installation of 22 sq mtr panel., air handling unit (classified). pre filter post filter.. cooling coil, heater-blower assy with drain pan, fine filter. (hepa filter 0.3 micron down to 99.997% efficiency shall be placed in terminal filter boxes in ceiling panel), recirculation type 10-15% fresh air. 85 to 90% recirculation, non cfc gas (like r-32/r-134 a/r410) cooled condensing unit with suitable accessories. (5.5 tr), refrigeration accessories., refrigerant copper piping with 19 mm thick nitrile rubber insulation on suction line and non-insulated liquid line, trays for copper piping etc. & all other accessories like expansion valve, hand shut off valve, dryer, sight glass etc., terminal filter boxes gel seal type with damper and ss grill and damper operating mechanism suitable for required qty, of air suitable for 610x610mm size filter 1000 efm capacity., hepa filter of h14 grade gel seal type 610 x610 mm, capacity 1000 cfm, terminal filter boxes gel seal damper and ss grill and damper required qty, of air suitable operatit for m size filter,, ira chan suitable, hepa filter of h14 grade gel seal type 450x450 mm., capacity 500 cfm, return air riser of 2.4 mtr to 2.7 mtr height with 10 micron filter, grill and volume control damper etc. suitable for iso class 8 clean room., return air control fire damper, air curtain 3ft width,, sheet metal ducting in 24g complete with tdf flanges, gaskets, nutbolts, stiffeners, supports with rtv sealant of higher gauge as per site requirement., thermal insulation-nitrile rubber 19 mm thk, thermal insulation-nitrile rubber 13 mm thk, fibre cloth & uv paint., dynamic garment cabinet with hepa filter h14 grade, blower assy, pre filter of 10 micron, uv light, fluroscent light, hanger, sliding/swing doors in aluminium/gl powder coating with glass, castor wheel, leveling bolt etc., electrical panel for ahu, condensing unit, heaters etc. with vfd, energy meter, mccb, contactor, relay, mcb, simer, temperature and humidity controller etc., electrical wiring with all accessories from control panel to air handling unit to condensing unit., display and control panel for hvac system., led light fixtures 600 x600 mm 36 watt, reputable company electrical cabling with all accessories for complete wiring of lab. mention design considering 3 to 4 equipment of single phase (upto 15 a) and 2 equipment of 3 phase (upto 15a)., pvc piping for draining the, dustry's re, from, ede, andling unit., cross over bench is ss304 1200 mm width x 500 mm height x 350 mm depth (approximate size), epoxy flooring 2mm thick, color as per choice., clean room compatible single leaf door with vision glass, door closer, hinges, push plate, drop seal, handle etc., m.s. structural support for ducting lines and compressors, vertical wall panel wherever require this includes fasteners, plates etc. as per required sizes., r-100 epoxy coving, color same as epoxy floor, validation & documentation., air quantities measurements, temperature, humidity, positive pressure, particle count and documentation like do, iq, oq & design, drawing etc.

CTN :41707102

15 Sep, 2025 49.2 Thousand

Bhopal - Madhya Pradesh

Tender For supply of plywood for general purpose , sheet cellular 25mm , sheet cellular 37mm , sheet cellular 6mm , electrodes welding steel mild , cable electrnic copper coductor 4mm , cable elect d3 pvc single , paint rfu olive green , cable elect atc elastomer insulated

CTN :41705606

25 Sep, 2025 NA

Bangalore - Karnataka

Tender For supply of booster rv78 qty 01 nos power steering qty 01 nos aggragate qty 01 nos d d - steel round 36 mm dia is _ 1570 gde c20 , mild steel round 90 mm dia is _ 1570 gde c20 , spring steel wire 0_4 mm dia is _ 4454 _ pt_i_1981 gde 3 , nitrile rubber bush as per sample by drg to be moulded with die , antifriction steel ball 6 mm dia , antifriction steel ball 5 mm dia , nitrile rubber _o_ ring 27 mm id x 3_25 mm dia to be moulded with die , back up ring teflon as per sample by drg to be moulded with die , piston rings teflon as per sample by drg to be moulded with die , nitrile rubber _o_ ring 65 mm id x 2_5 mm dia to be moulded with die , polyurathene round 40 mm dia to be moulded with dieshore d 85 by 90 , rod wiper as per sample by drg to be moulded with die , nitrile rubber _o_ ring 75 mm id x 2_5 mm dia to be moulded with die , steel hexagon screw m8 x 60 , steel tube 10 mm od x 1_5 mm thk is _ 3074 _2005 gde cds 1 or 2 , banjo fitting m12 x 1_5 mm as per sample by drg with oparation of turning_ milling_ grinding_drilling and thread cutting , banjo bush m12 x 8 mm as per sample by drg with oparation of turning_ milling_ grinding and drilling , copper round 18 mm diabs_ 2874_ gde_ c101 , steel sheet 0_5 mm thk x 200 x 500 mmcrca , finished pump cover as per sample by drg , steel round 32 mm dia is _ 1570 gde c40 , finished lever assy as per sample by drg , steel round 12 mm dia is _ 1570 gde c40 , steel sheet 3 mm thk x 200 x 500 mm crca , mild steel round 20 mm dia is _ 1570 gde c20 , finished hand lever as per sample by drg , steel round 22 mm dia is _ 1570 gde 40cr4 mo28 , mild steel round 32 mm dia is _ 1570 gde c20 , mild steel round 8 mm dia is _ 1570 gde c20 , internal circlip 16 mm dia , finished lever arm as per sample by drg , steel tube 26 mm od x 3 mm thk is _ 3074 _2005 gde cds 1 or 2 , aluminium hexagon 22 mm a by f is_738_94 gde 19500 , grub screw m4 x 5 mm long , grub screw m5 x 5 mm long , steel round 8 mm dia is _ 1570 gde c40 , steel tube 41 mm od x 3_5 mm thk is _ 3074 _2005 gde cds 1 or erw , steel wire mesh as per sample 120 grit , mild steel round 16 mm dia is _ 1570 gde c20 , finished pump reservior as per sample by drg , finished spring as per sample by drg , mild steel round 28 mm dia is _ 1570 gde c20 , copper round 20 mm dia bs_ 2874_ gde_ c101 , antifriction steel ball 9 mm dia , antifriction steel ball 8 mm dia , antifriction steel ball 5_56 mm dia , steel hexagon screw m8 x 30 mm long with nut and washer , steel hexagon screw m6 x 12 mm long with nut and washer , steel screw star round head m4 x 6 mm long , polyurathene round 32 mm dia shore d 85 by 90 , nitrile rubber _o_ ring 26 mm id x 2_5 mm dia , finished back up ring teflon as per sample by drg , nitrile rubber _o_ ring 13 mm id x 2_0 mm dia , nitrile rubber _o_ ring 16 mm id x 2_0 mm dia , nitrile rubber _o_ ring 140 mm id x 3_5 mm dia , nitrile rubber _o_ ring 30 mm id x 3_5 mm dia , nitrile rubber _o_ ring 20 mm id x 2_5 mm dia , spring steel wire 1_2 mm dia is _ 4454 _ pt_i_1981 gde 3 , steel round 48 mm dia is _ 1570 gde 40cr4 mo28 steel round 45 mm dia ohns a1s1 d1, steel round 25 mm dia ohns a1s1 d1, steel round 56 mm dia ohns a1s1 d1, steel round 40 mm dia is : 1570 gde c40, ball guide as per sample and drg with oparation of turning, drilling and grindingsteel round 40 mm dia is : 1570 gde c40, mild steel round 50 mm dia is : 1570 gde c20, steel round 56 mm dia is : 1570 gde c40, steel round 30 mm dia is : 1570 gde c40, steel round 45 mm dia is : 1570 gde c40, steel round 48 mm dia is : 1570 gde c40, ball joint bush outer as per sample and drg with oparation of turning, drilling and grindingsteel round 48 mm dia is : 1570 gde c40, sliding bush as per sample and drg with oparation of turning, //bid details 2 / 65

CTN :41711643

15 Sep, 2025 NA

Darjeeling - West Bengal

Tender For supply of led batten (q2) , cast copper alloy screw down bib taps and stop valves for water services as per is 781 (q3) , cable trunking and ducting system for electrical installations (wiring duct) (q3) , piano type non modular domestic electrical sockets - is 1293 (q3) , non - modular piano type domestic electrical switches as per is 3854 (q3) , wire nails (q4) , wood screws (q3) , tower bolts (ferrous metals) as per is 204 (q3) , curtain pipe, sider and mounting bracket (q4) , m - seal as per is 9197 (q3) , steel pipes for water and sewage as per is 3589 (q3) , piano type non modular domestic fan regulator as per is 11037 (q3) , pvc flat cable, aluminium conductor with pvc insulation and sheath as per is 694 (q3) , gland packaging (q3) , elecric bells and accessories as per is 2268 (q3) , pvc insulated unsheathed cable with flexible conductor as per is 694 (q2) , metal alloy casting water tap with aerator (v2) (q3) , taflon tape as per is 14635 (q3) , solvent 100 ml make as per sample. , sheet glass self assembly corner shelf make shakti jaynam prayag. , angle holder insulated backlit body with brass metel parts make kinjal bajaj havelles. , brass spindle for concealed stop cock 15 mm with plunger make shakti jaynam prayag. , flush handle make as per sample. , kitchen rack of sizes 650 x 950 x mm with suitable hanging hook make shakti jaynam prayag. , short bend pipe make as per sample. , ms bolt 40 mm long 3 mm dia make as per sample. , ms nut and bolt 75 mm long 6 mm dia make as per sample. , ms nut and bolt 50 mm long 3 mm dia make as per sample. ) /bid number : gem/2025/b/6635826 * /dated: 04-09-2025 & & / bid document 1 / 39

CTN :41715393

24 Sep, 2025 NA

Hisar - Haryana

Tender For purchase of items for aicte idea lab - transformer/motor coil winding material-copper wire with varnish insulation size-18 swg, copper wire with varnish insulation size-19 swg, copper wire with varnish insulation size-20 swg, copper wire with varnish insulation size-22 swg, copper wire with varnish insulation size-23 swg, copper wire with varnish insulation size-24 swg, copper wire with varnish insulation size-25 swg, copper wire with varnish insulation size-26 swg, copper wire with varnish insulation size-27 swg, copper wire with varnish insulation size-28 swg, copper wire with varnish insulation size-29 swg, copper wire with varnish insulation size-30 swg, copper wire with varnish insulation size-32 swg, copper wire with varnish insulation size-33 swg, copper wire with varnish insulation size-35 swg, copper wire with varnish insulation size-36 swg, aluminum wire with varnish insulation used for transformer winding size-10 swg, aluminum wire with varnish insulation used for transformer winding size-12 swg, aluminum wire with varnish insulation used for transformer winding size-13 swg, aluminum wire with varnish insulation used for transformer winding size-14 swg, aluminum wire with varnish insulation used for transformer winding size-15 swg, aluminum wire with varnish insulation used for transformer winding size-16 swg, aluminum wire with varnish insulation used for transformer winding size-17 swg, bobbins size-1.5 inch, bobbins size-2 inch, bobbins size-2.5 inch, bobbins size-3 inch, bobbins size-3.5 inch, bobbins size-4 inch, bobbins size-5 inch, highly permeable core-33, highly permeable core-3, highly permeable core-4, highly permeable core-5, highly permeable core-7, highly permeable core-8, varnish-air dry type, dpc paper-gsm : 2-10 mil, screws assembly for core fitting-3 & 4 inch nut bolt & clamp of 4,5,6, 7, 8 no.core, insulating paper-7 no. nomax paper, insulating tape-12 mm, glass sleeve size-0, glass sleeve size-1, glass sleeve size-2, glass sleeve size-3, glass sleeve size-4, glass sleeve size-5, glass sleeve size-6, transformer coil winding machine (motorized) with tablespecifications: 1 kva motor,winding speed: 700 rpmwire diameter: 0.5 mm, finished coil diameter: 100 mm, analog counter, objects required for cnc router and laser printer-hacksaw blades-12 inches, drill bit set for pcb power drill machine-assorted sizes upto 3.2 mm, power router bits-6 mm shank, circular saw blades-7 inch, screwdrivers-8 in 1 kit, drill bit sets-assorted sizes upto 13 mm, jig saw blades-4 inches, sand paper belts-gxk51 a120, bench grinder wheels-6 inches, dremel bits-10 mm shank, dremel moto saw-4 inches, end mills-3,4,6,8,10,12,14,16 mm, mdf board-8 4 feet, 3.30 mm thick, acrylic sheet-8 4 feet, 3.70 mm thick, cnc router 3d tool bit -assorted sizes upto 10 mm, iot items-alphanumeric lcd module-detail specification as per tender document, 2.44 cm (0.96 inch), 128 x 64 oled -detail specification as per tender document, 5 mm led (pack of 50 pcs)-detail specification as per tender document, 5 v, 2 amp power adapter-detail specification as per tender document, 7 segment led display-detail specification as per tender document, accelerometer-detail specification as per tender document, analog to digital converter ads1115 16-bit adc- 4 channel with programmable gain amplifier-detail specification as per tender document, biometric heart rate sensor-detail specification as per tender document, bread board-detail specification as per tender document, buzzer 5v-detail specification as per tender document, compass magnetometer-detail specification as per tender document, dc motor-detail specification as per tender document, iot lab explorer kit with arduino and raspberry pi (with cloud server account for 3 years)-detail specification as per tender document, temperature and humidity sensor module-detail specification as per tender document, digital multimeter-detail specification as per tender document, digital to analog converter mcp4

CTN :41727563

30 Sep, 2025 NA

Bareli - Madhya Pradesh

Tender For supply of 50 sq.mm (yellow) thin walled flexible elastomeric cable with copper conductor, upto 750v as per rdso spec. no.elrs/spec/elc/0019 (rev-4), data sheet - 2a,packing length multiple of 100 meter or plus +-5% packing instruction - spi217 [ warranty period: 30 months after the date of delivery ]

Puff Panel Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Co-operative

Central Government/Public Sector

corporations/Associations/Others

Corporations / Associations / Others