Latest pull off tester Tenders | Government pull off tester Tenders

Central Government / Public Sector

CTN :39562336

26 Apr, 2025 NA

Kamrup - Assam

Tender For corrigendum : providing of custom bid for services - maintenance and service contract for bhel make three davrs installed at guwahati refinery through oem ms bhel bhopal 9010c24f68 deputation charges for engg fy2425,custom bid for services - deputation charges for engg fy2526,custom bid for services - overtime charges fy2425,custom bid for services - overtime charges fy2526,custom bid for services - vendor will be provided guest house for accommodation in case of unavailability of guest house vendor has to make his own accommodation arrangement,custom bid for services - testing equipment hire charges,custom bid for services - mobilization de mobilization charges,custom bid for services - air travel charges payment will be reimbursed as per actual bill service line item no 80 of rfq item no 10,custom bid for services - car taxi charges payment will be reimbursed as per actual bill service line item no 90 of rfq item no 10

Central Government/Public Sector

CTN :40026859

07 May, 2025 NA

Tiruchirappalli - Tamil Nadu

Tender For supply of set of slide bar brackets consists of 3 items without foundation holes for x-class locomotives conforming to the following drawings. ite m no (1) - slide bar bracket lh slm index no. x/9/16a/m (item no 1), sr drg no. 1488/mg qty-1 no/set. item no (2) - slide bar bracket rh slm index no. x/9/ 16a/m (item no 2), sr drg no. 1488/mg qty-1 no/set. item no (3) - bearing cover slm index no. x/9/16a/m (item no 3), drg no. goc/x/sk-09-16030 qty-2 no s/set note: 1. item no (1) to (3) consists of one set. 2. for equivalent material specification refer goc/x/spec-x-032 3. all threads should be in bsw. 4.one in tegral test piece should be provided for each component, it should be parted in presence of railway authority for material testing before machining [ warrant y period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40025422

12 May, 2025 NA

Bangalore - Karnataka

Tender For supply of supply of networking item - 1 inch hdpe pipe , supply of 12 core multimode outdoor armoured fiber , supply of 24 core multimode outdoor armoured fiber , supply of fully loaded liu pigtails , supply of jpu fully loaded , 24 port cat 6 utp jackpanel , supply of cat 6 single information outlets with backbox and shuttered face plate commscope , supply of cat 6 dual information outlets with backbox and shuttered face plate commscope , supply of cat 6 shield metal field keystone jack commscope amp molex systimax panduit , supply of cat 6 shield metal field rj45 plug commscope amp molex systimax panduit , supply of cat 6 utp patch cord 1 meter red green commscope amp molex systimax panduit , supply of cat 6 utp patch cord 2 meter red green commscope amp molex systimax panduit , supply of cat 6 utp patch cord 3 meter red green commscope amp molex systimax panduit , supply of modular concealed gi metal box , supply of 1 inch pvc flexible pipe with accessories , supply of 1.5 inch pvc flexible pipe with accessories , supply of 2 inch pvc flexible pipe with accessories , supply of cat 6 utp cale box 305 meter commscope amp molex systimax panduit , supply of 1 inch conduit pipe , supply of 1.5 inch conduit pipe , supply of 1 inch casing and cappinng , supply of 1.5 inch casing and cappinng , supply of 2 inch casing and cappinng , supply of 2 inch gi pipe , supply of 1 inch ms pipe , supply of 6 2 inch raceway casing white , supply of 4 2 inch pvc casing white , supply of 2 2 inch pvc casing white , supply of 9 u wall rack with pdu and accessories , supply of 15 u wall rack with pdu and accessories , supply of 27 u floor mounting rack 800x800 with pdu and accessories , ofc laying with hdpe pipe with digging soft soil and refilling 3 feet x 1 feet approx , ofc laying with hdpe pipe with clamping required material clamping nail etc .should be provided by the vendor 3 feet x 1 feet approx , ofc laying with hdpe pipe through hdd , consruction supply and installation of cement chambers with covers 2.5ftx2.5ftx2.5ft , supply and fixing of ofc route markers stone , installation of liu , splicing and testing of pigtails , installation of utp jack pannel , laying of utp cable per meter , groove cutting in walls floors and fixing pvc 1 1.5 inch pipes , groove cutting in walls floors and fixing of modular concealated gi metal box metal box covering them , termination of i o box and fixing of face plate , laying of 1in conduit pipe required material screw gatta bend collar junction box should be provided by the vendor , laying of 1.5in conduit pipe required material screw gatta bend collar junction box should be provided by the vendor , laying of 1 incasing and cappinng required material screw gatta bend collar junction box should be provided by the vendor , laying of 1.5in casing and capping required material screw gatta bend collar junction box should be provided by the vendor , laying of 2in casing and capping required material screw gatta bend collar junction box should be provided by the vendor , laying of 2in gi pipe required material screw gatta bend collar junction box should be provided by the vendor , laying of 6 2 in pvc casing required material screw gatta bend collar junction box should be provided by the vendor , laying of 4 2 in pvc casing required material screw gatta bend collar junction box should be provided by the vendor , laying of 2 2 in pvc casing required material screw gatta bend collar junction box should be provided by the vendor , ofc outdoor 12core splicing kit with necessary consumables and enclosure , ofc otdr test per core bid details/ 2 / 43 charges with report , network and server support deploying of 5 service engineers

Central Government And Public Sector

CTN :40025360

08 May, 2025 NA

Kaiga - Karnataka

Tender For supply of supply of 240v ac single phase ups - 240v ac, single phase, 5kva ups as per attached technical specifications. ups used for type and seismic testing shall not be part of this item , installation and commissioning of the ups including removal and shifting of the existing ups , type testing or emc qualification charges , seismic test charges , iv and v charges , est test , reliability analysis , supply of ups used for type and seismic testing which completed all testing satisfactorily at factory , training charges , supply of mandatory spares i.e list of mandatory spares specified in specification clause 6.12

CTN :39594573

28 Apr, 2025 NA

Cossipore - West Bengal

Tender For corrigendum : supply of item -1 manufacturing testing inspection supply delivery of hot rolled u type steel sheet pile conforming to is 2314-1986 , item-2 manufacturing testing inspection supply delivery of hot rolled u type steel sheet pile conforming to is 2314-1986 , item-3 manufacturing testing inspection supply delivery of hot rolled u type steel sheet pile conforming to is 2314-1986 , item-4 manufacturing testing inspection supply delivery of hot rolled u type steel sheet pile conforming to is 2314-1986 , item-5 manufacturing testing inspection supply delivery of hot rolled u type steel sheet pile conforming to is 2314-1986

CTN :40005571

28 Apr, 2025 NA

Vapi - Gujarat

Tender For supply, installation, testing and commissioning of electro mechanical works of pumping machinery with associated mechanical and electrical equipments, instruments & accessories etc for different head works of vapi municipal corporation area. - item no.1: submersible type pump setsupply, installation, testing and commissioning of submerged submersible pump sets with suitable for working on three phase, 50 hz3percentage ,415v10percentage ac supply, suitable rpm with 3 core flat copper cable from pump to starter panel with cable end terminations, all supports, clamp, pipe fittings, mechanical seal, bearing bush, strainer, pump sensors and other protection, pump control unit etc. suitable construction of foundation/ installation device with cable length from pumps to panels and of following material of construction:m.o.c :- casing : ci, impeller : ss cf8m, wearing ring and bearing bush : bronze, tc mechanical seal, cs/ss bearing, ss shaft with sleeve, ss strainer and ms motor body fasteners : ss 316l, guide rail : ss 316, lifting chain : ss 316capacity of pump - 833 lpm and 35 m. head (15 kw/ 20 hp) - 1 working + 1 standby. the price should include water in oil sensor and io 113 for mechanical seal and motor protections suitable for each pumps., capacity of pump - 1667 lpm and 35 m. head (18.5 kw/ 25 hp) - 1 working + 1 standby, capacity of pump - 2083 lpm and 35 m. head (22 kw/ 30 hp) - 1 working + 1 standby, capacity of pump - 2500 lpm and 35 m. head (22 kw/ 30 hp) -(only supply of pump set - without installation), capacity of pump - 3333 lpm and 35 m. head (30 kw/ 40 hp) - 1 working + 1 standby, capacity of pump - 5833 lpm and 35 m. head (48.75 kw/ 65 hp) - 1 working + 1 standby, capacity of pump - 8333 lpm and 35 m. head (75 kw/ 100 hp) - 1 working + 1 standby, capacity of pump - 7333 lpm and 45 m. head (82.5 kw/ 110 hp) - 1 working + 1 standby, capacity of pump - 11111 lpm and 35 m. head (90 kw/ 120 hp) - 1 working + 0 standby, capacity of pump - 11111 lpm and 35 m. head (90 kw/ 120 hp (only supply of pump set - without installation), capacity of pump - 14286 lpm and 35 m. head (110 kw/ 150 hp) - 1 working + 1 standby, capacity of pump - 16667 lpm and 35 m. head (132 kw/ 180 hp) - 2 working + 1 standby, capacity of pump - 25000 lpm and 26 m. head (150 kw/ 200 hp) - 1 working + 1 standby, item no.2: submersible non-clog vertical pumpsupply, installation, testing and commissioning of sewage submersible, non clog type suitable for working on three phase, 50 hz 3percentage , 415 v 10percentage , ac supply, 1450 rpm synchronous speed with 3 core flat copper cable from pump to starter panel with cable end terminations, all supports, clamps, pipe fittings along with mechanical seal, bearing bush, strainer etc. complete set and following m.o.c: casing: ci, impeller: ss cf8m, wearing ring and bearing bush: bronze, tc mechanical seal, cs / ss bearing, ss shaft with sleeve, ss strainer and ms motor body.capacity of pump - 15 kw/ 20 hp - 2 working the price should include water in oil sensor and io 113 for mechanical seal and motor protections., item no.3: manufacture, supply, lowering, laying, jointing, welding and delivery of electric resistance welded (up to 400mm)/submerged arc welded(above 400mm) m.s.pipe having bevelled ends plate or coil conforming to is-3589-2001 or its latest revision/ amendment for following thickness outside diameter at gwssb store or site anywhere in gujarat state including all taxes, insurance, transportation, freight charges, octroi, inspection charges, loading, unloading conveyance to departmental stores, stacking etc. all complete charwada 2 - jalaram mandir - 219.1 mm dia. (4.5 mm thick)- delivery pipe, balitha 1 - near kabrsthan - 273 mm dia. (5 mm thick)- delivery pipebalitha 2 - bhandarwada - 273 mm dia. (5 mm thick)- delivery pipechhiri 1 vallabh nagar - 273 mm dia. (5 mm thick)- delivery pipe, dungra - azad nagar - 323.9 mm dia. (5.6 mm thick)- delivery pipe vapi - naikwad tanki - 323.9 mm dia.

State Government

CTN :39978168

02 May, 2025 1.50 Lacs

Sagar - Madhya Pradesh

Tender For supply of medicine> - generic/branded alopethic medicine,surgical item, pethological testing and item as gaz,bandez,cottonrolls branded, handsenetizer, and other all types ayurvedic, homopethic medicine sabhi dabaiya government ferm se uplabdh na hone par kray ki jabegi. doctor paramarsh ki aawashyaktanushar.

Central Government And Public Sector

CTN :39978436

01 May, 2025 34.81 Lacs

Kaiga - Karnataka

Tender For supply, fabrication, welding/joining, erection and testing of hdpe piping from kgs 3 and 4 to kaiga 5 and 6 area. - supply items (schedule-a), 100 nb equal tee sch 40 astm a 234 gr. wpb sml bw ansi b 16.9, 1oo nb sorf flange 150 # astm a 105 ansi b 16.5, 100 nb blind flange 150 # astm a 105 ansi b .16.5, 100 nb gate valve manual op. flange end 125/150 # sa 216 gr. wcb ansi b 16.34, 100 nb ball valve manual op. flange end 125 /150# hdpe, suit to 100 nb,sa 105, 150 # ansi b 16..5 back ring flange, flange end mechanical type flow totalizer 150# (range 150000 to 200000 cu. mtr.capacity) to suit to 100 nb sa 105 flange 150 #, ansi b 16.5. flow meter totaliser specification, dn-110 hdpe pipe is 4984 gr. pe 80 pn 6, dn-110 hdpe 90 degree elbow, is 4984 gr. pe 80 pn 6 as per is 8008, dn-110 pipe /stub end, 1s 4984 gr pe 80 pn 6 as per is 8008., 100 nb cs back ring flange astm a 105 as per ansi b 16.5 150#, dn-110 hdpe equal tee, is 4984 gr.pe 80 pn 6, as per is 8008, dn-50 hdpe cap, is 4984 gr. pe 80 pn 6, as per is 8008., hexagonal headed bolt, nut with washer 85 mm long is 1363 gr. 6.3 /is 3757 gr. 8.8, ismc 100 is 2062 , e 250 gr. a, 12 mm thick plate is 2062 , e 250 gr. br, 110 nb ms u clamp 25 mm wide x 3.5 mm thick, 100 nb m 12 u bolt is 2062 e 250 gr. a, m 10 x 100 hst/faz, 1.6 mm thk caf gasket 100 nb is 2712 gr. w/3, erection item (schedule-b), butt fusion welding / joining and laying of dn- 110 hdpe pipe, is 4984, grade pe 80, pn 6 both under ground and above ground., butt fusion welding / joining and erection of dn-110 90 degree elbow, hdpe, is 4984, grade pe 80. pn 6 ( inclusive of welding/fusion of both end), butt fusion welding / joining and erection of dn-110 hdpe equal tee, is 4984, grade pe 80. pn 6 ( inclusive of welding/fusion of three end), butt fusion welding / joining and erection of dn-110 hdpe pipe end /stub end is 4984, grade pe 80. pn 6, butt fusion welding/joining and erection of dn-50 hdpe cap is 4984 grade pe-80 pn-6, installation of 100 nb hdpe ball valve without welding., fabrication , erection , welding, inspection,surface cleaning & supply and application of hb chlorinated rubber zinc phospate primer paint in two coats to minimum 100 micron dft and supply and application of hb chlorinated rubber finish paint in two coats to 60 micron dft for cs structural steel support and components., installation of anchores m10 x 100 mm hst/faz including handling,scafolding,labour & tools., removing & reinstallation of precast concrete slab 0.3 m (l) x 1.350 m (w) x 0.1 m (t), excavation and backfilling of excavated trenches with the soil after completion of installation of pipe lines and testing including levelling/grading, compaction to the required level 1.5 m (d)x 0.8 m (w), sand bedding 50 mm depth x 400 mm width for underground hdpe piping including supply of sand., dismantling of existing dn-50 hdpe piping including breaking of existing cement concrete ( 0.7 cub.mtr) & pcc to be done after breaking and removing of existing cement concrete, including tools, labour & disposing of unservicable material as directed by eic, carefully removing the korean grass along with soil of 100 mm to 250 mm depth and 1500 mm width including replacing the same removed korean grass along with soil after laying hdpe line along with tools & tackles,watering of grass,dressing of area etc.in all complete as per direction of eic

CTN :39977436

29 Apr, 2025 NA

Duliajan - Assam

Tender For procurement of closed drain tank & sump pump for development of condensate removal system (dehydration system) & the associated facilities - supply of closed drain tank & sump pump at madhuban (duliajan), supply of horizontal, cylindrical, underground inside pit, saddle mounted closed drain tank of capacity 27.5 m3 with inlet size of 6 nb, ansi rating 150#, with blind/mounted flanges for nozzles as required as per tender specification, attached p&id, data sheets and technical specifications etc., gaskets for all flange joints as mandatory spares, fasteners for all flange joints as mandatory spares 20% (min. 04 nos. of each size & type), gaskets for all flange joints as pre-commissioning & commissioning spares, fasteners for all flange joints as pre-commissioning & commissioning spares 10% (min. 02 nos. of each size & type), design, engineering, manufacture, procurement of materials and bought out components including, assembly at shop, inspection, testing at manufacturers works, packing & delivery, supply of vertical submersible (type vs4) sump pump with design flowrate of 6 m3/hr as per data sheet, p&id and technical specifications including supply of all commissioning spares, special tools and tackles, supervision of erection and commissioning of item no.1 & 2 (with per diem rate).

Central Government/Public Sector

CTN :39756201

28 Apr, 2025 NA

Kanakapura - Karnataka

Tender For corrigendum : supply,installation,commissioning & testing of stainless steel tubes and d ouble ferrule fittings for lhb hot buffet car & amrit bharat lcbnacab coaches, as per d rawing: rcf/md/mat sch/lwcbac , ver-01 , packing instruction: as per standard packing. it sho uld be ensured that item should not rub during transportation. the item should be pa cked with adequate strength. transit damage , if any , shall be at the cost of supplier. [ warranty period: 30 months after the date of delivery ]

Pull Off Tester Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government / Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government And Public Sector

State Government

Central Government And Public Sector

Central Government/Public Sector