Latest pull test machine scrap Tenders | Government pull test machine scrap Tenders

CTN :41359788

28 Aug, 2025 13.20 Lacs

Kamrup - Assam

Tender For supply of earth work in excavation by mechanical,supplying and filling in plinth with sand under floors,providing and laying cement concrete,brick work with common burnt clay,making plinth protection 50mm thick of cement,cement concrete flooring,12 mm cement plaster finished with a floating coat of neat cement of mix,providing and fixing wash basin with ci brackets,providing and fixing white vitreous china pedestal for wash basin completely,providing and fixing gi pipes complete with gi fittings including trenching and refilling etc,supply installation testing and commissioning of prefeb toilet block,supply of 1 point 5 sqm 1 core pvc copper wire,supply of led tube light 18watt executed

State Government

CTN :41355800

12 Aug, 2025 NA

Delhi - Delhi

Tender For repairing of delivery line of pumpset no.7 and 8 along with allied work at 2nd 40 mgd cwph plant at wazirabad water works. (re-invite) - hydraulic excavator (3d) with driver and fuel.dsr no. 0020, hire and running charges of crane 20 tonne capacity.dsr no. 0028, pumping out water caused by springs, tidal or river seepage, broken water mains or drains and the like.dsr no.14.23, providing and constructing bund with filled up earth in empty (pvc) cement bags (excluding the cost of earth which will be available at site of work) i/c stitching and stacking and placing in position etc. complete and i/c cost of empty plastic bags and removal of the same after completion of the work. providing and stacking of earth filled gunny bags to make the bund to give the dry condition of work. dsr no.26.1.19, taking out ms pipes of 600mm dia. from the trenches after de-jointing and stacking the same along the trenches within a lead of 50 meters. approved rates., providing ms pipe fabricated/manufactured out of ms plate of steel grade fe410 as per is 3589:2001 or out of hr coils of same/equivalent grade;coated internally with food grade epoxy and externally/outside with epoxy coating;complete in all respect as per relevant is codes with upto date amendments and as directed by engineer-in-charge.600mm nominal dia. (clear internal dia.) pipes of 8mm thickness (min.).approved rates.make skf / fag, laying in position m.s. pipes/steel cylinder reinforced concrete pipes suitable for rubber ring jointing or welding or flanged jointing (excluding cost of pipe). approved rates., 50 % neoprene (1.5 mm to 25 mm).sor no.22.6.1, cast iron non rising sluice valve of size 600mm, pn 1.0 for clear water application, flanged end as per is : 14846 body,dome,wedge- ci is:210, gr.fg260 body & wedge rings bronze is:318 gr. ltb2, spindle-ss is:6603, gr.12cr12, gland packing- greasy jute, packing fasteners- cs, is:1367, cl-4.6/4.0, gasket natural rubber, flange drilling - is:1538, table 4 & 6.make :- kbl /ivc/djb approved. sor.4.12.13, providing of ms flange(1set) suitable for the above sluice valve along with suitable size nut-bolts for making flange joints complete as per site requirement., installation of sluice valves with the help of all labour like fitter, welder, cutter, helper, beldar, chowkidar, supervisor, electrician and material used like welding machine, cutter set i/c oxygen cylinder, welding road t&p along with its all transportation loading, unloading complete at site of work., testing and commissioning of sluice valve on full pressure as per satisfaction of engineer-in-charge.

State Government

CTN :41333626

12 Aug, 2025 2.18 Crore

Udaipur - Rajasthan

Tender For purchase of various testing major apparatus (lab equipment) in quality control labs under zone ajmer, bikaner,udaipur-i and udaipur-ii - fully automatic servo controlled compression testing machine (ctm)-3000 kn capacity with additional load frame of 500 kn capacity & flexure frame of 100 kn capacity:- supplying, fixing and commissioning of fully automatic servo controlled compression testing machine (ctm) of 3000 kn capacity which should be capable of conducting compression test on concrete & mortar specimens and allied products as per is : 516 & is :4031 (part-6). the machine should be power operated with servo controlled motor capable to apply the load continuous by without shock and there shall be large enough space provided for test specimen to accommodate in a readable position. machine shall have good load control and capable of applying the load at the specified rate, uniformly with automatic control with percentage of error for load shall not exceed + 1.0% of the indicated load. the system shall have an arrangement for automatic placing system, which achieved by the combination of advance hydraulic and electronic system. the systems can be loaded in load, displacement or strain control basis. complete machine unit shall conform to is: 14858-2000 and is: 9399-1979 and as per direction of engineer in charge. the salient features and technical specification of the machine shall be as under :- i) ctm-3000 kn machine loading frame - four column high stiffness welded from with enough stabiility . - heavy duty mechanical platens with spherical seated block (vicker hardness > 550), bottom bearing, blocks, auxiliary plates (vh > 550) shall have flatness tolerance within 0.03 mm and squareness and parallelism tolerance within 0.06 mm wide.- base shall have fine finished servo controlled hydraulic cylinder with hardened and finest abraded piston. - frame with safety guard door and transparent fragment guard (both front & rear) (ii) hydraulic pumping system, it should be compact in design and suitable for the supply of required flow and pressure for the movement of the actuactor. it shall have oil tank of adequate capcity vane type pump powered by three phase motor. anti vibration mounting shall provided as standard along with the hps.iii) micro-processed (plc & hmi) based touch panel display & control system user friendly interface control system with application software shall provide the digital servo control, precise operation, ramp generation for the machine, data acquisition, storage, processing, analyzing and reporting etc for the continuous operation of the system.iv) technical specification of ctm (3000 kn) capacity -3000 kn, platen size 320 mm dia, ram dia 260 mm, ram travel 50 mm, vertical daylight clearance 350 mm, horizontal daylight clearance 370 mm, least count - 0.1 kn, pace rate controlling -1%, rate of loading 1.3 mm/min (when running idle), 0.14 to 032 mpa/sec (with specimen), motor capacity 3 hp (min), power supply (240v, 50-60hg, three phase.), capacity of oil tank 20 litre, max. operating pressure 210- 600 bars, flow of pump 2 & 4 lpm (duel speed) , auto stop & release of pressure when specimen failure, multi operation compression test up to 3000kn, up to 500 kn range and flexure test, accessories spacers- 4nos, controller unit auto pid operation with closed loop update rate of 10 khz to control pace rate automatically as programmed. start, stop & hold test system, load control 01kn/sec to 50 kn/sec., displacement control 0.01 mm/sec to 1mm/sec. load indication & control coloured touch screen display of suitable size, test report facility to print test report, export data to ms excel. auto internal calibration without proving ring, short circling protection overload safety cut off, piston over travel safety cut off- shall be made in addition to 3 kva 3 ph servo control stabilizer, technical specification of ctm (500 kn) load frame- capacity 500 kn, platen size 256 mm,

State Government

CTN :41333627

12 Aug, 2025 1.47 Crore

Udaipur - Rajasthan

Tender For purchase of various testing advanced apparatus (lab equipment) in quality control labs under zone ajmer, bikaner,udaipur-i and udaipur-ii - ultra sonic pulse velocity testing instrument :-supplying ultra sonic pulse velocity testing instrument for non destructive testing (ndt) of hardened concrete to asses the quality of concrete in term of dense, homogeneity and uniformity. instrument shall also be capable of crack & void detection and elastic properties measurment of concrete. the apparatus for ultra sonic pulse velocity measurment shall consist electrical pulse generator, transducers in one pair, standard calibrator bar, amplifier, electronic timing device. performance requirement of apparatus shall be as under :-- transit time accuracy within - 1 % range- range of time - 20 s to 10 ms- referance specimen - two no. usually steel bars having pulse transit time 25 s to 100 ms with accuracy 0.2 s- transducer - one pair - piezo electric and magneto strictime type frequencies in between 10khz to 200 khz, contact type ultra sonic concrete tester range - upto 5 mtr. & 5 mtr. and aboveaccuracy - 100 nano second- power - 7.2 v (dc), rechargable bettary - oper. temperature - 0 to 500 c - resolution - 0.1 s- display - 128x64 graphic lcd - display response time - instantaneousstandard accessories :-1- 1 set of 7.2 v nicd cell2- probe cable 2 no. (4m each)3- transduces - 2 no. (50 mm dia, 60 khz)4- calibration block alongwith verification block with nabl traceability certificate5- cover /bag instrument shall meet requirements of is: 516(part-5/sec.-i) 2018, en 12504-1 & astm c 597. standards.the complete item shall be supplied as per direction of engineer in charge . rates are inlusive of all taxes ., rotational viscometer : supplying & installation of rotational viscometer of spring torque model for higher viscosities that specially designed for conducting high-temperature testing of ashphalt binders in compliance with astmd 4402/d4402m-23 and is: 73-2013,is :15462-2019 & is:17079-2019 .standards . it should be capable to determine viscosities of liquids. like oil, ashphalt & solvent etc.key feature of apparatus shall be as under :-precise temperatures control unit to ensure precise temp control and maintaining content & accurate testing temperatures.user friendly inter face to easy to use and display of accurate result.level indicators surface level indictors should be our both the temp control unit and the main unit to ensure equipment remain level.versatile spindle options capable of with standing the demanding condition of ashphalt testing., builtin micro printer for convenient result printing., automatic range calculation capable of automatic full scale range (fsr) calculation for 100 % viscosity with specific spindle and speed combination., window based software shall include window based software for creating viscometer vs temperatures course with test data continently stored ms excel., high-visibility lcb the lcb display features a white backlight for enhanced visibility and clarity.technical specifications of apparatus shall be as under :-rotation speed 0.1- 250 rpm, viscosity measurement range 100 cp to 64m cp, torque range high up to 57496 dyne.cm ( 5.749 mn.m) ,spindles set of large spindles as required, torque range 10%- 100% full -scale torque, measurement error: 1% (f s), temperature controlling range: up to 200 c, temperature controlling accuracy: 0.1 c, cubage of sample cylinder: 20ml, serial interface: rs232, working environment: ambient temperature: 15 c to 35 c, 85%, operating voltage: ac (220v 10%)v, 50hz, single phase, total power consumption: 200w, components included of apparatus shall be as under :- -head of viscometer -auxiliary controlling case (containing a temperature controller and a micro-printer), - thermo-electric heater, -spindles made of aisi 316l as per requirment with adaptor, -pen drive for pc software setupstand, external power supply connection cable, instruction manua

State Government

CTN :41327793

18 Aug, 2025 NA

Surat - Gujarat

Tender For providing of concrete testing for esr , sump and pump house

Central Government And Public Sector

CTN :41026707

11 Aug, 2025 NA

Imphal - Manipur

Tender For corrigendum : supply of supply of sitc of 2nos 30 kva and 2nos 20 kva rtu dg sets in manipur d d - 30kva 3phase 415v dg set with standard control panel and acoustic enclosure as per cpcb iv , itc of 30kva dg set with acceptance testing , supply of 20kva 3phase 415v dg set with standard control panel and acoustic enclosure as per cpcb iv , itc of 20kva dg set with acceptance testing , earthing with gi earth plate 600 mm x 600 mm x 6 mm thick , providing and fixing 25 mm x 5 mm gi strip in 40 mm dia gi pipe , providing and fixing 25 mm x 5 mm gi strip on surface or in recess , providing and laying in position reinforced cement concrete plinth for dg set , supplying of 3.5x25sqmm of pvc insulated and pvc sheathed xlpe steel armoured aluminum conductor ug power cable of 1.1kv grade , laying of one number pvc insulated and pvc sheathed xlpe power cable of 1.1 kv grade of size upto 35 sq. mm direct in ground , laying of one number pvc insulated and pvc sheathed xlpe power cable of 1.1 kv grade of size upto 35 sq. mm in the existing pipe , laying and fixing of one number pvc insulated and pvc sheathed xlpe power cable of 1.1 kv grade of size upto 35 sq mm clamped with 1mm thick saddle on wall surface , supplying and making end termination with brass compression gland and aluminium lugs for size 3.5x25 sq mm

CTN :41314433

25 Aug, 2025 40.00 Lacs

Bilaspur - Chhattisgarh

Tender For e-tender for supply, installation, testing and commissioning of 1000 kn 100 tons loading frame and pan type concrete mixture for civil engineering, ggv

Central Government/Public Sector

CTN :41323261

14 Aug, 2025 NA

Chennai - Tamil Nadu

Tender For supply, layout, installation, and pressure testing of feeder system for continuous flow of sedi ment-free water for loco equipment and component pressurized cleaning, as per the following specification s: 1) cpvc pipe 1.5 inch dia -230 mtrs; (make- finolex or ashirvad or equivalent)- 1 set. 2) hand lever oper ated screwed end 2 pc design pn40 renewable teflon seat stainless steel ball valve size: 32mm (1.25 inc h) - 2 nos/set 3) 2.5 sq mm single 2 core pvc insulated copper cables confirming to is: 694- 30 mtrs/set. 4) 1 hp v flow single phase pressure booster pump (make: cri or kirloskar or equivalent) - 1 nos/set 5) fittin gs and accessories: elbows, bends, and reducers (various angles and sizes for layout) - 46 nos/set 6) union fta joints (for connections and fittings) - 25 nos/set 7) concrete demolition, excavation, pipe laying, mass c oncrete for an area of 15 cum - 1 set, 8) installation & pressure testing of the complete system - 1 set. not e: concealed and surface layout shall be approved by consignee as per site specific requirement before su pply of material and done as per approved layout plan. pressure testing shall be done after installation and no dropping shall be ensured. [ warranty period: 30 months after the date of delivery ]

State Government

CTN :41285773

08 Aug, 2025 NA

Una-Hp - Himachal Pradesh

Tender For restoration of rain damages fort/well 90 at dharampur in tehsil haroli distt. una (h.p.) (sh:- p/laying, jointing and testing of hdpe pipe 160 mm dia pe-80, pn-4 1/c construction of outlets & demolation of construction of cement concrete path.) (job no. 01)

State Government

CTN :41285776

08 Aug, 2025 NA

Una-Hp - Himachal Pradesh

Tender For restoration of rain damages fort/well 90 at dharampur in tehsil haroli distt. una (h.p.) (sh:- p/laying, jointing and testing of hdpe pipe 160 mm dia pe-80, pn-4 1/c construction of outlets & demolation of construction of cement concrete path.) (job no. 02)

Pull Test Machine Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors