Latest pump foundation repair Tenders | Government pump foundation repair Tenders

Central Government/Public Sector

CTN :41704768

15 Sep, 2025 22.30 Lacs

Gorakhpur - Uttar Pradesh

Tender For supply of provision of lighting arrangement for the watch tower along with solar system at kushinagar airport : : - design and sitc of off grid solar system of 1 kwp capacity along with suitable capacity inverter and 2 nos. of 150 ah solar tubular battery along with necessary module mounting structure & civil works like foundation etc. as required at site for upssf watch tower in operational area of airport., supply of 4c x 6 sq. mm xlpe insulated & pvc sheathed, armored aluminium conductor cable of 1.1kv grade as per is 7098 (part i) 1988 with up to date amendments etc. complete as required., laying and fixing of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size on wall surface as required.upto 35 sq. mm (clamped with 1mm thick saddle), laying of hdpe pipe upto size 50 mm complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required., laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size in the existing rcc/hume/metal pipe as required.upto 35 sq. mm, supplying and fixing of following way single pole and neutral, sheet steel, mcb distribution board 240 v, on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (but without mcb/rccb/isolator) 6 way, double door, supplying and fixing 6 amps to 32 amps rating, single pole, 240 volts, 10 ka, c curve, miniature circuit breaker suitable for inductive loads in the existing mcb db complete with connections, testing and commissioning etc. as required., supplying and fixing dp mcb 32 amps, double pole, rating, 240 volts, 10 ka, c curve, miniature circuit breaker in the existing mcb db complete with connections, testing and commissioning etc. as required., wiring for light point/fan point/ exhaust fan point/ call bell point with 1.5 sq.mm frls pvc insulated copper conductor single core cable in surface/ recessed steel conduit, with modulat switch, modular plate, suitable gi box and earthing the point with 1.5 sq.mm frls pvc insulated copper stranded conductor single core cable etc. as required.(group c), wiring for circuit/ sub-main wiring along with earth wire with 2x2.5 sq.mm+ 1x 2.5 sq.mm earth wire.sizes of frls pvc insulated copper conductor, single core stranded cable in surface/ recessed steel conduit as required., supplying and fixing suitable size gi box with modular plate and cover in front on surface or in recess, including providing and fixing 2 nos. 3 pin 5/6 amps modular socket outlet and 2 nos. 5/6 amps modular switch, connection etc. as required., supply of 20 watt led batten surface mounted suitable for operation on 230 volt,50hz ac supply, complete etc as required., supply of 400 mm, 2100 rpm wall mounting swinging fan suitable for single phase 230 volt, 50 hz ac supply complete with motor, capacitor, mounting clamps etc. with all accessories as required complete., installation, testing and commissioning of pre-wired led fitting luminaries etc. of all types (surface/recessed) & street lights complete with all accessories. directly on ceiling/ wall , including connection with 1.5 sq.mm frls pvc insulated, stranded, copper conductor single core cable with flexible conduits and coupler and earthing etc. as required., installation of wall mount fan in the existing opening including making good the damage, connections, testing and commissioning etc. as required.upto 450mm sweep., supply of led street light of minimum lumen output of 3600 lumen made up of pressure die cast aluminum housing with membrane filter and have ip66 optical as well as electrical compartment with wide operating voltage range of 230+/- 10 percentage complete with all accessories as required., providing & fixing 32/40 mm dia b class gi

Central Government/Public Sector

CTN :41689415

13 Sep, 2025 NA

Medak-T - Telangana

Tender For supply of casing ring , suction liner , motor sole plate , foundation bolt motor , foundation bolt pump

Central Government/Public Sector

CTN :41676635

15 Sep, 2025 2.46 Lacs

Angul - Odisha

Tender For demolishing of damaged concrete rcc base, dismantling of m.s foundation frame and casting of new concrete rcc base with fabrication of new m.s foundation frame for pump-motor no-3 of phase-ii along with anticorrosive painting of all foundation frame

State Government

CTN :41399843

09 Sep, 2025 NA

Satara - Maharashtra

Tender For corrigendum : supply and installation, commissioning and testing of pulverizer (25 inch size 40 hp) movindg foundation stand with motor railing for m c and motor along with mounting pad , motor pully 12 inch cloth ballon 1 set vibrating screen

State Government

CTN :41624547

12 Sep, 2025 20.14 Lacs

Multi City - Karnataka

Tender For dismantling the existing cooling water pump motor sets along with concrete bed. all the civil works like removing the priming pipes cement bedding, concrete foundations of pump motor sets at el 166 ft. turbine floor concrete foundation bedding works with suitable packets / opening for motor foundation bolts and pump foundation bolts and fabrication of metal frame structure for erection of motor as per detailed approved drawings of pump motor sets, leveling, curing etc. has to be carried out by contractor. supply and erection of new motors and kpcl issued pump, leveling proper alignment on concrete bedding to match the existing old suction and delivery pipes flanges with hardware, gaskets height of centerline of pump suction nozzle and delivery nozzle should match the existing suction pipe flanges and delivery pipe flanges centerline from foundation. necessary pipes, flanges, bends, gaskets, hardware for retrofitting works and gas cuttings, welding, flanges holes drilling if any should be carried out by the contractor. necessary gas cutting, nozzles, gas welding machines, welding rods concrete drilling / chipping tools other tools, tackles, chain pulley, pull lifts, terfers, cement, sand strengthening work of concrete with skilled technicians to be carried out. local transportation for transporting men and material to site to be arranged by contractor. all other works of erection, testing and commissioning as per site engineers directions should be carried out by the contractor as specified in detailed technical specification and scope of work furnished in section-iii- of bid document attached in the e portal.

CTN :41632858

12 Sep, 2025 14.43 Lacs

Tiruvallur - Tamil Nadu

Tender For 1.providing new bore well and new 7.5 hp sub motor pumpset with pipe and oht specials at murukkampattu new urular colony 2. construction of 10,000 litre capacity service reservoir 7.50 m staging height (raft foundation) tiruttani block pac.16

CTN :41582374

11 Sep, 2025 NA

Balrampur - Uttar Pradesh

Tender For supply and fitting of 5 hp dewatering pump set having discharge 20 lps at 10 m head with 3-phase induction motor (crompton / kirloskar /gec (areva) / siemens / abb / jyoti / marathon / bbl make), with complete accessories including suitable inlet & outlet pipe, base plate, coupling foundation bolt, etc. and should be able to give maintenance free service. pump should be dynamically balanced and should have minimum vibrations. it should provide trouble free operation, low maintenance and longer life of the pump. pump will be installed in the pacca pump house at utraula pump canal, utraula, balrampur under modernization project of electrical & mechanical work utraula pump canal, utraula, balrampur

CTN :41582375

11 Sep, 2025 NA

Balrampur - Uttar Pradesh

Tender For supply and fitting of horizontal coupled type single stage 7.5 hp mud pump set with suitable casing to provide smooth unobstructed flow suitable for coupling with electric motor (crompton / kirloskar /gec (areva) / siemens / abb / jyoti / marathon / bbl make). mud pump sets shall be used for dewatering raw river, slushy water mixed with sand, mud with complete accessories including base plate, coupling foundation bolt, etc. and should be able to give maintenance free service. pump should be dynamically balanced and should have minimum vibrations. it should provide trouble free operation, low maintenance and longer life of the pump. pump will be installed in the pacca pump house at utraula pump canal, utraula, balrampur under modernization project of electrical & mechanical work utraula pump canal, utraula, balrampur.

CTN :41582376

11 Sep, 2025 NA

Balrampur - Uttar Pradesh

Tender For supply, installation, testing and commissioning of 5 h.p. 3 phase 415-volt motor driven centrifugal horizontal type pump set to be used as booster pump for water injection coupled through a standard type love joy coupling. mounted on robust constructed foundation range to 250 lpm of water with size 32x50 mm, head up to 35 m after erection of new pipe line for booster pump. including cost of all pipe, fitting, labour material and t&p at utraula pump canal, utraula, balrampur under modernization project of electrical & mechanical work utraula pump canal, utraula, balrampur

State Government

CTN :41562292

05 Sep, 2025 NA

Karur - Tamil Nadu

Tender For installation, testing and commissioning of electrical equipments at chp area of rsps2 in tnpl unit i - ht switch board installation, testing and commissioning of the following ht switchgears including the final preparation of foundation, and transporting from employers stores or any other storage area (inside mill) to the place of installation, positioning in place, site assembly of loosely furnished accessories, 11 kv single bus bar board (1 vertical size 800x1500x2400) at + 0.0 m lvl, transformers installation, testing and commissioning including oil filtration & testing of the following transformer, including the final preparation of foundation, and transporting from employers stores or any other storage area (inside mill) to the place of installation, positioning in place, site assembly of loosely furnished accessories. transformer oil to be tested at nabl lab and report to be submitted to tnpl., transformer 2.5mva, 11/0.433kv at + 0.0 m lvl, low voltage power & motor control centersinstallation, testing and commissioning of the following lv pccs including the final preparation of foundation, and transporting from employers stores or any other storage area (inside mill) to the place of installation, positioning in place, site assembly of loosely furnished accessories, chp pcc (panel size 5700x1360x2375 - multisection) at + 6.00 m lvl, chp mcc-1 (panel size 10800x1120x2375 - multisection) at + 6.00 m lvl, chp mcc-2 (panel size 10800x1120x2375 - multisection) at + 6.00 m lvl, chp mcc-3 (panel size 6000x1120x2375 - multisection) at + 6.00 m lvl, mldbs / acdbs/changeover panel, chp acdb (panel size 3120x560x2375 - multisection) at + 6.00 m lvl, chp mldb (panel size 3120x560x2375 - multisection) at + 6.00 m lvl, installation of miscellaneous panels, panels upto 50 kg, panels 51 to 100 kg, panels 101 to 500 kg, panels 501 to 1000 kg, installation of push button stations/ control stations, installation and commissioning of ordinary, lockable type, emergency stop or start/stop pushbutton stations to be located near the equipments on steel supports, excluding supply of steel structural supports, cable terminations, earthing., welding sockets, installation, connection, testing and commissioning of thermoplastic polycarbonate 63a tpn with elcb-30 ma + 16a sp with elcb-30 ma industrial type sockets excluding cable termination. (box size 700x400x360mm), installation, connection, testing and commissioning of weather-proof metal clad 20a spn industrial type sockets excluding cable termination., cables, laying, dressing and clamping in trays/walls/ceiling/trenchesvertical laying of the following cables in ready trays, pulling through pipe and fixing of cable tags (aluminium strip number tags), fixing of gi saddles, saddle bars for cable clamping, clamp trays shall be tied by means of nylon ties etc, transportation of cables from employers stores or cable yard or any other storage area (inside mill) to respective plant area , 11 kv xlpe aluminium armoured cables3cx300 sq.mm al. ar. ue xlpe 11kv ht cable (round wire armoured), 1.1 kv, 3c/3.5c/4c xlpe/pvc aluminium/copper armoured/ unarmoured power cables, laying of cables up to 2.5 sq.mm, laying of cables from 6 to 16 sq.mm, laying of cables from 35 to 50 sq.mm, laying of cables from 70 to 120 sq.mm, laying of cables from 150 to 185 sq.mm, laying of cables from 240 to 300 sq.mm, 1.1 kv pvc copper control cables, laying of cable - 12 c x 1.5 sq.mm, end terminations for 11 kv power cablesend terminations for 11 kv xlpe power cables including cutting, stripping of cable insulation, providing compression type terminals, crimping on to the cable and then connecting it ( end termination kit will be supplied by tnpl), 3cx300 sq.mm al. ar. ue xlpe 11kv ht cable (round wire armoured), end terminations for lt power cablestermination of cables and connection of leads for 1.1 kv and lt cables including supply of termination accessories like double compression type brass cable glands, lugs, conn

Pump Foundation Repair Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

State Government

State Government

State Government