Latest pumping item Tenders | Government pumping item Tenders

State Government

CTN :40115531

05 May, 2025 17.13 Lacs

Dausa - Rajasthan

Tender For 03/2025-26 replacement of old polluted pipeline, submersible pump set, feeder panel, submersible cable, gi pipe at various schemes in sub div. dausa rural under collector contingency plan

State Government

CTN :40109003

13 May, 2025 1.20 Crore

Alwar - Rajasthan

Tender For work of replacement of submersible pump set, eletric control panel , submersible and armoured cable and g.i. pipe etc in existing tube well in uwss alwar under division alwar (annual rate contract

State Government

CTN :40108576

28 Apr, 2025 5.70 Lacs

Chittorgarh - Rajasthan

Tender For construction and commissioning of new tube wells and supply of submersible pump set etc rwss bansi tehsil barisadri distt. chittorgarh

State Government

CTN :40108577

28 Apr, 2025 5.56 Lacs

Chittorgarh - Rajasthan

Tender For construction and commissioning of new tube wells adn supply of submersible pump set etc rwss bhadsora tehsil bhadesar distt. chittorgarh

State Government

CTN :40111435

02 May, 2025 NA

Hooghly - West Bengal

Tender For withdrawing of old submersible pumping machinery for surging and installation of new pump motor set with allied accessories at balichak water supply scheme ph no iii dist hooghly under ed phe dte

State Government

CTN :40071835

19 May, 2025 NA

Birbhum - West Bengal

Tender For providing and installation of electro-mechanical accessories at cwr site and allieds works at ekpara pwss, block-rampurhat-i under bolpur mechanical division - supply and delivery of openwell submersible pumping machinery set suitable for wet pit installation complete with stainer along with all accessories with following specification: pump : discharge (q) : (1800-1280) m3/hr. & head (h) : (19-38) mtrs.method of starting : sd, shaft-stainless steel-ss-304, impeller- crome steel/ci/s.s / bronze, suc & del size- 90/80 mm dia, type of position-horizontal. mechanical sealmotor : 12.5hp (suitable for open well)operating voltage : 415 ( 10 %), phase : 3ph, 50 hz 6%speed : 2800 rpm, method of starting : s/dmake : ksb / grundfos / texmo / cri / kbl / mbh / or any approved vendor. ( n.b : manufacturers test certificate along with charecteristics curve, moc and gurantee certyificate have to be submitted at the time of delivery.), supply & delivery at site of 35 mm x 3.5 core size aluminum armored, xlpe insulated 1.1 k.v. grade cable, conforming to is 7098(i) as per direction of eic.(make:- gloster / polycab / mescab / or any approved vendor list of phed.) ( n.b : manufacturers test certificate have to be submitted at the time of delivery.), supply & delivery of 100a kit-kat rewireable (porcelain fuse carrier & base) (make:- havells / l&t / or any approved vendor list of phed.), supply & delivery of 100 amps re-wireable porcelain fuse unit type tpn main switch with steel sheet enclosure (conforms: is/iec600947-1&3). (make: havells /approved vendor list of phed.), supply & delivery of re-wireable type tpn changeover switch 100 amps 415v, 50hz, 4 pole offload with steel sheet enclosure (conforms: is/iec60947-1&3). (make: havells /approved vendor list of phed.), 100 amps, 4way, wall mounted copper busbar chamber with steel sheet enclosure (conforms:is/iec:60947-3). (make: havells /approved vendor list of phed.), supply and delivery of the following pipes, valves, pipes and gauges etc at site-- (make: approved vendor list of phed.), 100mm dia m.s. black pipe p/e conforming to is:1239 part-1 (2004), heavy (c class)., 150mm dia m.s. black pipe p/e conforming to is:1239 part-1 (2004), heavy (c class)., 100mm dia m.s. blank flange 15mm thick perforated as per is1538., heavy type suitable dia. ms suspension clamp along with nuts bolts and washers., 100mm dia. cast iron double flanged manually operated rising spindle type sluice valve generally conforming to is: 14846, having body, door, dome / bonnet, gland in graded cast iron to is 210 gr. fg 260, four faces of ss aisi 304 and spindle nut of gunmetal to is 318 gr. ltb 2, outside screw rising stainless steel aisi 304 spindle, valves suitable for a maximum working pressure of 10 kg/cm (seat test) & body tested to 15 kg/cm . flanges faced and drilled to is:1538 table 4 & 6. valves tested by closed end method only. (moc & tc needed for valve)., 100mm dia. cast iron double flanged single door swing non-return valve generally conforming to is:5312 part i, having body, door, cover in graded cast iron to is 210 gr. fg 260; body & door rings of stainless steel to ss aisi 304 , hinge pin of ss aisi 304, valves suitable for a maximum working pressure of 10 kg/cm (seat test) & body tested to 15 kg/cm . flanges drilled to is 1538 table 4 & 6.(moc & tc needed for valve)., 100 mm dia dismantling joint pn-1.0 ci dismantling joint complete galvanised , stud, nut and washer and follower flanges, drilled to is:1538 table 4 & 6. ( at delivery side of pump ), supply & fixing of perforated gi cable tray tee with perforation not more than 17.5% suspended from ceiling with two nos. suspenders & 25x25x3mm angle iron for supporting the cross member incl. s&f gi connector, 6mm dia ms suspender, bolts & nuts, steel fastener etc. as required of the following size. incl. al painting of ms support. [200x50x1.25mm x 3mtr long (18swg)] [app

State Government

CTN :40095274

19 May, 2025 NA

Birbhum - West Bengal

Tender For providing electro-mechanical accessories and others at pump house- i and ii for bahadurpur w/s scheme at murarai -i block under bolpur mechanical division phe dte. - supply and delivery at site of the following submersible pumping machinery and electrical accessories as per approved vendor list of phed, submersible pumping machinery directly coupled with water proof suitable size motor having following specification :- pump:duty condition -25.74 m3/hr, head- 57 mtr, shaft-stainless steel, impeller- s.s / gm, outlet size: 65mm / 80mm., motor:submersible type 3 ph , 50hz, 415 volt 10% 2900 rpm motor must be suitable for operation with star delta starter.(test certificate along with characteristic curve should be submitted at the time of delivery)., 1.1kv grade 4 sq.mm x 3 core water proof flat submersible cable for above pump-motor set., 1.1kv grade 10 sq.mm 3 core xlpe insulated aluminium armoured cable conforming to is 7098 (part-i) 1988, with upto date amendments., supply and delivery of the following valves, pipes and gauges etc at site, 3mtr long 80mm dia upvc standard type column pipe [cream color] with both side threaded and one end side socketed with registered kpmg, 1.5 mtr long 80mm dia upvc standard type column pipe [cream color] with both side threaded and one end side socketed with registered kpmg., 80mm dia. ci top & bottom adopter., heavy type suitable dia. ms suspension clamp along with nuts bolts and washers., 80mm dia. cidf non-raising sluice valves, pn 1.0 rating (conforming to is:14846) for delivery pipe line and wash out line.(moc & tc needed for valve)., 80mm dia. cidf single door swing non return valve, pn 1.0 rating (conforming to is:5312).(moc & tc needed for valve)., cidf 90 bend- 1no., ci flanged tee- 1no., blank flange-1no., ci/ ms flanged short piece 0.50 mtr.-1no, ci/ ms flanged pipe 1mtr.- 1 no. etc (as per is specification and certification registered) for construction of delivery pipe line and wash out line, heavy type 250mm dia./suitable split type tube well cover with clamping arrangement including supply of nuts, bolts and washer as per departmental design., anti snapping safety device for pump set by supplying suitable size of ms angle busket and nylon rope of required length including supplying of nuts, bolts and all other materials, 150mm dial pressure gauge [range 0-7kg/cm ] with glycerine filling inside the dial including brass cock and fitting complete [this cost includes 15mm. dia g.i. pipes and specials]., making brick pillar 0.25 x 0.25 x 0.75 mtr/suitable hight for supporting of valves and pipes with 12mm thick plaster and net cement finish complete., making cc foundation for support of the kiosk box after excavating the earth upto a depth of 0.6 mtr below the gl including supply of all materials complete with 12 mm thick cement plastering with net cement finishing complete as per direction of eic (size: 3 x 1 x 5)., suitable kiosk box for cable connection of submersible pump motor set with degree of protection ip 65 including suitable legs and 6 nos. al. bus bar for 32 amps and all necessary earthing arrangement and insulator as per direction of eic., laying of one no. cable 10 sqmm 3 core ( departmental supply) in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of thecable with 8 (eight) nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed., carrying and fixing three phase submersible pump 7.5 hp mug starter as per direction of eic ., installation of submersible pumping machinery to newly sunk tubewell along with column pipes (as required), top cover, valves, and specials of above with protection pipe and supply of ms clamp, nut bolt, cable gland socket etc. making inerconnection of the pump delivery line to pump collecting main line near tubewell with supply of all necceasary pipe, reducer/enlarger, gi/ms specials etc.

State Government

CTN :40108811

02 May, 2025 5.00 Lacs

Lalsot - Rajasthan

Tender For nit no 01/2025-26 unlowering and lowering submersible pump set in open well/tubewell under sub. div. lalsot

State Government

CTN :40104950

16 May, 2025 1.29 Crore

Kargil - Jammu And Kashmir

Tender For design commissioning testing, supply installation of a solar submersible pump with all necessary accessories, including solar pv modules, pump modules, pump motor set, solar panel mounting structure, control unit etc complete job at goma parakachick

State Government

CTN :40111353

03 May, 2025 3.03 Lacs

Baruipur - West Bengal

Tender For sinking of one number deep tubewell with installation of 1hp submersible pump with motor set and allied works at sonakhali 33/11 kv s/stn under canning division

Pumping Item Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors