Tender For auction sale of depot ferrous scrap - scrap released junk ferrous from lcw and others consisting of corroded material, ms cutting wagon plate, corroded plates, old sheet, drums, pipes, all type of rope wires, beds, electric fittings, racks, strechers, wheel chairs, corroded angle, channel, electric fitting, cast iron signaling material location fox full and half,padastal for gate(signaling) panel board wire rod saria, panel box, almirah, chair, table small pieces of ms/cs, iron rod, side body fillter jali, loco electrical and signaling ms scrap and other corroded misc.items of all type of ms/cs kachra of sorts and sizes and old used unserviceable. (except wta items, spring, rail). careful cutting allowed for easy loading. fdp 40 days. material should be loaded with one end from lot as per description. mode of delivery by actual weight.
Tender For auction sale of depot ferrous scrap - scrap released junk ferrous from lcw and others consisting of corroded material, ms cutting wagon plate, corroded plates, old sheet, drums, pipes, corroded angle, channel, electric fitting, cast iron signaling material location box full and half,padastal for gate(signaling) panel board wire rod saria, panel box, almirah, chair, table small pieces of ms/cs, iron rod, side body fillter jali, loco electrical and signaling ms scrap,all signaling gate items, boom, gear,all types of ms jali and other corroded misc.items of all type of ms/cs kachra of sorts and sizes and old used unserviceable., (except wta items, spring, rail). careful cutting allowed for easy loading. fdp 40 days.delivery should start from one end. mode of delivery by actual weight.
Tender For providing of operation and maintenance of electrical systems/electrical installations - distribution panel retrofitting work and jb fitting work in each block at gtps
Tender For auction sale of depot miscellaneousllaneous scrap - p.l- 98414501, miscellaneous electrical parts and fitting scrap (consisting of roof mounted ac packages unit), qty- 18 nos. x 850kg. = 10440 kg.
Tender For supply of 260 psi nitrogen tyre inflator c c - 260 psi nitrogen tyre inflator , 300 ltr nitrogen tank , 100 mtr high pressure air charge hoge , 50 mtr pressure pipe , installation of nitrogen tyre inflator with underground electrical fitting
Tender For supply of air compressor d d -7. 5 hp air compresssor with 500 ltr tank , pressure pipe , 7. 5 hp motor , pressure guage , installation ofair compresssor with 500 ltr tank and electrical fitting
Tender For auction sale of depot non ferrous scrap - lot of scrap non-ferrous consisting of scrap alluminium casting of electrical, ohe, signal, diesel,and electrical loco, items,cfl fitting,m.h fitting,halozen fitting,doom light fitting,led fitting,led out door fitting,atd wheel, exilator steps,oil seal, etc.with or without slight iron/nf and other attachment. as available as in the lot.
Tender For auction sale of rolling stock - unserviceable and condemned four nos. coaches number ¿ sec 998512 rccn, sec 978407 rcc, sec 998384 rcc and sec 988205 rcc. the coach will be sold without excluded fitting (complete trolley along with complete wheel set and bearing with all brake rigging fitting and bmbc, dv complete, side buffer, side bearer bronze pieces, bio toilet tank as per annexure ¿ii(a) and electrical items as per annexure ¿i (alternator, pulley, fan, tube light, battery, rr box, regulator) and icf bogie which are exists with coach, excluded fittings ( as pe letter no. mech./hq/003/007/1133 date -15.04.2019 and icf bogies which are exist with coach to be handed over by purchaser to sse/c&w/bmy. the coaches will be handed over at cf yard bmy as is where basis is, and after disposal of all cut off material, cutting area to be cleaned.
Tender For repair maint of old internal electrical wiring mccb mcb db and submain wiring fitting fixtures of otm accn and repar replacement of old unsv defective lt panels ug cable lt switchgear items in central ac plant under ge i gos
Tender For corrigendum : supply of electrical items for repair and maintenance of electrical installation at iiser bhopal - supply of 22 (+/-2) watt led tube light betten t-5 made of aluminium/pc body with pc diffuser with inbuilt driver for proper driving of leds. the minimum system lumen output 100lm/watt, and p.f>0.9. the cct of led used should be between 5700k to 5000k only. (make: havells/crompton/philips/wipro/orient/panasonic/ jaquar)., supply of 10 (+/-2) watt led tube light betten t-5 made of aluminium/pc body with pc diffuser with inbuilt driver for proper driving of leds. the minimum system lumen output 100lm/watt, and p.f>0.9. the cct of led used should be between 5700k to 6000k only. (make: havells/crompton/philips/wipro/orient/panasonic/jaquar)., supply of 38 (+/-2) watt recessed mounted 2x2 feet led light fitting with pc diffuser with inbuilt driver for proper driving of leds. the minimum system lumen output 100lm/watt and p.f>0.9, up to 2 kv surge protection. the cct of led used should be between 6000k to 6500k only (make-havells/crompton/philips/wipro/orient/ panasonic/jaquar), supply of 38 (+/-2) watt surface mounted 2x2 feat led light fitting with pc diffuser with inbuilt driver for proper driving of leds. the minimum system lumen output 100lm/watt and p.f.> 0.9, up to 2 kv surge protection. the cct of led used should be between 6000k to 6500k only (make-havells/crompton/philips/wipro/orient/ panasonic/jaquar)., supply of surface mounted ceiling light 18 watt led light fitting with pc diffuser with inbuilt driver for proper driving of leds. the minimum system lumen output 100lm/watt and p.f. 0.9, up to 2 kv surge protection. the cct of led used should be between 6000k to 6500k only (make:-havells/crompton/philips/ wipro/orient/ panasonic/jaquar)., supply of recessed mounted (11) ceiling light 22 (+/-2 watt led light fitting with pc diffuser with inbuilt driver for proper driving of leds. the minimum system lumen output 100lm/watt and p.f 0.9, up to 2 kv surge protection. the cct of led used should be between 6000k to 6500k only. (make-havells/crompton/philips/wipro/orient/ panasonic/jaquar), supply of surface mounted motion sensor ceiling light 10 watt led light fitting with inbuilt driver for proper driving of leds. the minimum system lumen output 100lm/watt and pf>0.9, up to 2 kv surge 6000k to protection. the cct of led used should be between (make-havells/crompton/philips/wipro/orient/ panasonic/jaquar) 6500k only, supply of 10 watt (+/-2 watt) bulkhead light fitting with inbuilt driver for proper driving of leds. the minimum system lumen output 100 im/watt and p.f>0.9, up 10 2 kv surge protection. the cct of led used should be between 6000k to 6500k only. (make:-havells/crompton/philips/ wipro/orient/ panasonic jaquar), supply of 10 watt track (study lamp) light fitting with inbuilt driver for proper driving of leds. the minimum system lumen output 100 im/watt and p.f>0.9, up to 2 kv surge protection. the cct of led used should be between 6000k to 6500k only. (make: havells/crompton/philips wipro/orient/ panasonic/jaquar), supply of 45 watt (+/-2 watt) streetlight fitting with inbuilt driver for proper driving of leds. the minimum system lumen output 100 lm/watt and p.f. 0.9, up to 2 kv surge protection. the cct of led used should be between 6000k to 6500k only. (make: havells/crompton/philips wipro/orient/ panasonic/jaquar), supply of aesthetically designed post top led luminaire smd of 40 w+ 5%, rated voltage 240v ac, 50 hz. ip 65 protection, system lumen efficacy > 90 lumens/w, voltage range 140-270 v ac, pf 20.95, cct: 5700k-6500 k, thd-10%, cri->70, operating temperature 0°c to 50°c, (make havells/crompton/philips/wipro/orient/panasonic/ jaquar)., supply of aesthetically designed tripod style inverted pyramid bollard of 0.8m to 0.9m heighted led light of 10 (+/-) 2 w at 230 v ac operation, ip 65 protection, voltage range 150-260 v ac, pf>0.9, cct: 5400k 6500k, surge protection 4.5kv made up of aluminium casti