Web Analytics Made Easy - StatCounter

Pvc Cable Scrap Tenders

Get complete information related to latest Pvc Cable Scrap Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Pvc Cable Scrap Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Pvc Cable Scrap Tenders .

Filter
Loading....
Loading....
Loading....
Loading....
Loading....

Bid Submission Date Range
Tender Value

State Government

CTN :40130277 Due date: 10 May, 202510 May, 2025 7.00 Lacs
Tender For vidhut and other material supply at dist jail katni - led tube light complete branded, l.e.d. bulb 12 watt branded, l.e.d. bulb 09 watt branded, l.e.d. bulb 15 watt branded, l.e.d. light 24 watt branded, chargeable led bubble 09 watt, condenser 2 wire, copper wire 0.75 mm (90 meter per bundle) branded, copper wire 1 mm (90 meter per bundle) branded, copper wire 1.5 mm (90 meter per bundle) branded, copper wire 2 mm (90 meter per bundle) branded, copper wire 4 mm (90 meter per bundle) branded, cable (two-byer complete 10mm) branded, cable (three-byer complete 12mm) branded, chakki pat 16 - inch branded, chakki soft branded, chakki pulley branded, chakki patta (belt) branded, chakki dau bearing 0.6 no. branded, grease box of flour mill, flour mill belt, ceiling rose, cutout 63 a.m.p. in, cutout 100 a.m.p. in, electrical tape roll, tester branded, ceiling fan branded, grease branded, board sheet 10x12 branded, board sheet 8x10 branded, board sheet 7x4 branded, casing strip branded, board switch branded, board holder branded, fan regulator branded, 5 pin socket branded, 2 pin socket branded, plastic pipe black 2 inch 20 feet in branded, telephone wire 0.5 mm, telephone connection lead, telephone receiver lead, computer printer cartridge refill, photo coffee cartridge refill, watch cell branded, socket 2 inch, union 2 inch, elbow 2 inch, tee 2 inch, bulb inch, bulb 1 inch, chapra, motor starter, cement branded, sand, ballast, water tanker (5000 litres), photocopy paper a-4 size, pen, m.c.b 4 poll 63 amp, m.c.b 3 poll 63 amp, m.c.b 2 poll 32 amp, m.c.b 1 poll 16 amp, speaker unit dardfoam, condenser 150 mfd, condenser 100 mfd, led halogen (100 watt), 3 core cable 4 sq mm (100m), copper winding wire

CTN :40135848 Due date: 17 May, 202517 May, 2025 NA
Tender For supply of other section , m and l for two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces width or girth exc 10 cm including preparation of surfaces all as specified and as directed. , m and l for three coats of white washing on new plaster and unplaster of wall surfaces including preparation of wall surfaces complete all as specified and as directed. , s and f steel stainer for sewage sumps of different pores as specified and directed by engineer in charge , suppy of stand by non clogging pump of 5hp 1520 lpm with all accessories and fittings as specified and directed by engr in charge , heavy duty double tank type chemical dosing system consist of service tank 150 ltrs capacity with dosing system plunger type , s and f gi strip 25x4mm as earthing lead bolts nuts checknuts and washers all as specified and directed , material and labour for earthing complete with galvanized steel plate electrodes of size 600mm x 600mm x 6mm thick , pumping out sewage water from the existing sumps of sewage plant pump house with the help of non clogging of pump any kind capacity of pump set not less than 2160 lpm , lifting the non clogging pump set electrically operated by 15hp 20 hp 3 phase motor incl column pipe line shaft etc , dismantling of non clogging submersible pump of capacity 15hp 20 hp for comprerhensive maintenance and if required taking out burnout old winding from the stator , lowering complete the non clogging pumping set and reflixing the motor carefully including connection and testing , pumping out sewage water from the existing sumps tanks of stps mbbr technology with the help of non clogging , cleaning of 1.2 mld sewage treatment plant after pumping out sewage water from the existing sumps , lifting the non clogging submersible pump set electrically operated by 3.7 hp 3 phase motor incl column pipe line , dismantling of non clogging submersible pump of capacity 3.7 hp and taking out burnout winding from the stator of motor and rewinding with pvc copper wire , dismantling of electric sewage induction motor 3.0 hp ac 3 phase 415 volts from site after disconnecting from pump , dismantling non clogging pump set of centrifugal type 3.0 hp induction motor ac 3 phase 415 volts , dismantling of electric induction blower motor 5.0 hp ac 3 phase 415 volts for comprehensive maintenance from site after disconnecting , dismantling of electric induction blower motor 30.0 hp ac 3 phase 415 volts for comprehensive maintenace from site after disconnecting from blower electric connection , material and labour for pcc 1 3 6 type c2 using 40mm graded stone aggregate for foundation etc , m and l for taking out comprehensive maintenance of existing unserviceable air blower of any make of capacity 125 cubic hr to 188 cubic hr with taking out of electric cable , supply only gear oil ep 90 complete all as specified and as directed by engineer in charge. , supply only air filter suitable for existing one complete all as specified and as directed by engineer in charge. , supply only belt as per existing model complete all as specified and as directed by engineer in charge. , supply only bearing as per existing complete all as specified and as directed by engineer in charge. , supply only set of rotor with hub as per existing model complete all as specified and as directed by engineer in charge. , m and l for finding out defect of stps panel and taking out burnt interconnection wiring including u.s and serviceable component for re use including rewiring of panel , supply and fix in repairs flexible flat pvc copper couductor stranded submersible cable cores 1100 volt grade 4 sqmm 3 bid details/ 2 / 41 core , supply and fix in repairs flexible flat pvc insulated pvc couductor stranded submersible cable cores 1100 volt grade 10 sqmm 3 core , s and f round strand steel wire rope dia 12 mm and connected clamp nut bolts fixed complete all as specified and as directed by engineer in charge. , s and f submersible pump ful

CTN :39910128 Due date: 30 Apr, 202530 Apr, 2025 NA
Tender For corrigendum : supply of n6145 p060270 ( winding wire dual coated 30 swg) (24bqec044) , n6145 p060271(winding wire dual coated 31 swg) (24bqec044) , n6145 p060272 (winding wire dual coated 32 swg) (24bqec044) , n6145 p060273 ( winding wire dual coated 33 swg) (24bqec044) , n6145 p060274 (winding wire dual coated 34 swg) (24bqec044) , n6145 p060275 (winding wire dual coated 35 swg) (24bqec044) , n6145 p060276 (winding wire dual coated 36 swg) (24bqec044) , n6145 p060277 (winding wire dual coated 37 swg) (24bqec044) , n6145 p060278 (winding wire dual coated 38 swg) (24bqec044) , n6145 p060279 (winding wire dual coated 39 swg) (24bqec044) , n6145 p060280 (winding wire dual coated 40 swg) (24bqec044) , n6145 p060312 (winding wire dual coated 20 swg) (24bqec044) , n6145 p060313 (winding wire dual coated 20 5 swg) (24bqec044) , n6145 p060314 (winding wire dual coated 22 swg) (24bqec044) , n6145 p060317 (winding wire dual coated 25 swg) (24bqec044) , n0561 5218252 (cable elctrical 1 core) (24bqec044)

CTN :40098131 Due date: 14 May, 202514 May, 2025 NA
Tender For supply of rubber bushing , 10319203 lv7 t 815 273 121 015 690 rubber bushing 13x1 csn 63 3881 1 , 10330118 lv7 t 815 311 110 533 0 washer 4 3 csn 02 1702 1 mks 720 , 10311383 lv7 t 815 130 053 650 644 tubular connector , 10319029 lv7 t 815 205 101 354 4 washer 2 5 mm , 10317685 lv7 t 815 4x4 273 110 409 000 sealing ring 75x3 beier fkm 75 , 10329919 lv7 t 815 4x4 442 076 880 864 line , 10319218 lv7 t 815 4x4 136 241 071 000 hose clamp 100 is 4762 84 , 10318472 lv7 t 815 4x4 273 110 376 000 ring 17 3x2 4 fpm 592 smirit , 10318036 lv7 t 815 8x8 107 733 101 000 circlip 110x4n is 3075 part ii 86 , 10516450 lv7 t 815 hmv 442 076 608 924 tank to filter tube , 10532101 lv7 t 815 hmv 442 053 652 646 neck , 10516940 lv7 t 815 hmv 442 078 540 194 protective basket lh , 10515961 lv7 t 815 hmv 205 238 113 4 arrestment screw , 10530910 lv7 t 815 hmv 443 611 240 000 cap nut 391 0612 , 10522822 lv7 t 815 hmv 5310 023111 sealing ring 22x27 , 10532574 lv7 t 815 hmv 309 251 140 815 hex head screw m8x18 csn 02 1151 25 , 10526185 lv7 t 815 hmv 548 241 065 000 clip torro 20 32 9c6w1 , 10522436 lv7 t 815 hmv 106 111 331 000 screw iso 4017 m8x25 5 8 a4g , 10532736 lv7 t 815 hmv 311 110 829 000 spring washer 6 is 6735 94 , 10520586 lv7 t 815 hmv 563 411 226 050 windscreen washer canister 5l , 10531221 lv7 t 815 hmv 273 110 014 294 sealing ring 60x3 csn 02 9281 2 , 10515740 lv7 t 815 hmv 311 212 915 090 washer 9 csn 02 1729 1 mks 720 , 10521758 lv7 t 815 hmv 107 110 061 000 nut m8 csn 02 1401 25 , 10323589 lv7 t 816 10x10 993 101 187 0 high pressure pipe , 10336017 lv7 krz 214 1805057 b gasket driven gear shaft frt brg , 10315042 lv7 krz 255b 3405300 b holder gasket , 10332385 lv7 krz 256b 1108021 pedal pad , 10315179 lv7 krz 255b 3408065 protecting bushing , 10329429 lv7 krz 347588p29 nipple , 10336173 lv7 krz 214 1805032 b1 cap gasket , 10342310 lv7 krz 201t 1105552a gasket coarse fuel filter cover , 10343974 lv7 krz 236 1701075 a gasket , 10324771 lv7 krz 256b 3405049 packing ring , 10316929 lv7 krz 214 6103220 holder and link rh drop glass , 10323794 lv7 krz 255 8403210 bracket pad , 10322235 lv7 krz 255b 5107032 b cover plate floor sealing , 10347617 lv7 krz 500a 3405132 gasket , 10336888 lv7 krz 348173 p29 connection , 10337659 lv7 krz 210 1803048 a ring oil seal gland , 10328468 lv7 krz 20g 1109124 bolt air cleaner , 10350096 lv7 krz 214 4501240 10 limiter cable winding gasket , 10312322 lv7 krz 250b 3502134 lock ring , 10357463 lv7 krz 214 1802086 a bush frt , 10336358 lv7 krz 312581 p29 washer , 10344975 lv7 krz 210 1801032 b2 front pad , 10336760 lv7 krz 503 3405178 b packing pin , 10324199 lv7 zil 130 1702014 gasket , 10334704 lv7 zil 306336 p ring , 10320238 lv7 zil 131 2402127 driving helical pinion brg cover gasket , 10337266 lv7 zil 130 3003067 lower bush , 10345234 lv7 zil 300196 p tee piece , 10324247 lv7 zil 130 1701199 locking ring , 10333354 lv7 zil 130 3504010 a2 brake pedal assy , 10346593 lv7 zil 130t 3408116 lower pressure elbow assy , 10341208 lv7 zil 130 1701146 gasket , 10317805 lv7 zil 301378p8 bolt , 10341421 lv7 zil 130 1701042 gasket clutch shaft brg cover , 10316857 lv7 zil 120 3507046 nut spharical clutch control rod , 10317361 lv7 zil 301370 p8 rear mount bolt , 10343173 lv7 zil 307769 bid details/ 3 / 151 p2 thrust ring , 10328637 lv7 zil 130 1702169 shaft first and reverse shift arm , 10327538 lv7 zil 130 1702223 housing gasket gear box , 10334009 lv7 zil 131 1804067 rod , 10347293 lv7 zil 305069 p plug filter , 10315619 lv7 zil 120 3402045 key strg wheel , 10332519 lv7 zil 413033 p8 nut , 10543809 lv7 zil 130 3003069 1 spring , 10311736 lv7 zil 130 3715060 a lamp , 10332041 lv7 zil 130 3507138 adjusting lever , 10343668 lv7 zil 131 8403165 casing , 10341125 lv7 zil 304098 p8 transmission attachment nut , 10345406 lv7 zil 164 3003073 boot cover , 10333352 lv7 zil 130 3430027 control valve sealing ring , 10337251 lv7 zil 262 519 p plug , 10332713 lv7 zil 130 3401381 strg gear case lower cover sealing , 10320830 lv7 zi

State Government

CTN :40107962 Due date: 05 May, 202505 May, 2025 3.50 Lacs
Tender For supply of electric item at sub jail mahidpur - wire bundle 1/18 copper wire bundle 2.5mm copper wire bundle 4mm copper plug 5 ampere mcb 63 ampere tube light led bulb holder light switch 5 ampere power plug 15 ampere power top 15 ampere submersible cable 6mm copper submersible cable 8mm copper submersible cable 10mm copper, telephone wire, led led light 50 watt, led led light 100 watt, led bulb 7 watt, led bulb 9 watt, led bulb 15 watt, led bulb 18 watt, long wire bundle 40-76a tape roll, casing pipe electrical fitting, main switch 100 ampere, cutout 100 ampere, ceiling fan, grease, tube well starter 5h/7h, electric motor winding / repairing 5h/7h, ceiling fan binding & repair, ceiling fan regulator, flour mill belt rubber, flour mill parts, bearing flour mill parts

Central Government/Public Sector

CTN :40098562 Due date: 14 May, 202514 May, 2025 NA
Tender For supply of supply of elmo luft 1agolden fast drying insulating varnish , supply of high performance high temperature grease , supply of capacitors capacity 2.5f , supply of capacitors capacity 4.0f , supply of sturdy durable male female 2 pin sockets , supply of 3pin plug tops current rating 6 amp , supply of 3pin plug tops current rating 16 amp , supply of t8 snap in pin holder , supply of enamel coated copper winding wire , supply of lithium ion battery , supply of heavy duty single compression cable glands , supply of heavy-duty single compression cable glands , supply of heavy duty single compression cable glands with checknut , supply of tin plated copper lugs heavy duty reducer terminal , supply of ss screw , supply of aluminium blind pop rivet for riveter , supply of aluminium blind pop rivet for riveter

State Government

CTN :40049068 Due date: 14 May, 202514 May, 2025 NA
Tender For supply, delivery and installation of different electro-mechanical accessories at loba pwss under bolpur mechanical division, phe,dte. - supply and delivery at site of following vertical submersible pumping machinery directly coupled with wet winding type suitable size submersible motor with following specification: method of starting : dol / s/d, shaft-s.s, impeller- s.s / crome steel / gm, outlet - 80/100 mm dia motor : operating voltage : 415 ( 10 %), phase : 3ph, 50 hz 6%speed : 2900 rpm, method of starting : s/d(make : ksb / grundfos / texmo / cri / kbl / mbh / or any approved vendor.) ( n.b : manufacturers test certificate along with charecteristics curve and gurantee certyificate have to be submitted at the time of delivery.), a)discharge (q) : 20m /hr.head (h) : 36 mtrs., b) discharge (q) : 27m /hr.head (h) : 42 mtrs., c) discharge (q) : 27m /hr.head (h) : 51 mtrs., d) discharge (q) : 30m /hr.head (h) : 57 mtrs., installation of submersible pumping machinery to newly sunk tubewell along with column pipes (as required), top cover, valves, and specials of above with protection pipe and supply of ms clamp, nut bolt, cable gland socket etc. making inerconnection of the pump delivery line to pump collecting main line near tubewell with supply of all necceasary pipe, reducer/enlarger, gi/ms specials etc. including brick, sand, cement, rod etc and laying & drawing of all actuator cable & cable protection pipe as required and all to complete the job including all connection & testing commissioning as per direction of eic., add: gst @ 18% on sum of item no: 1.00 to 2.00, add: cess @1% on sum of item no. 1.00 to 3.00

State Government

CTN :40052658 Due date: 28 Apr, 202528 Apr, 2025 1.00 Crore
Tender For rc for goods and equipment for fy 2025-26 as per bd-, step/step/step, , mud masala, , lime from kali bhatta for lime masonry work, , cement, , ppc, , white cement, , fine aggregate, , gravel - local, , rakhi (fly ash), , surkhi, , stone dust (in masonry work), , ballast stone/brick (for other than road work), , 40mm measuring stone (hand broken grit) (cut voids 1/11), , and yair werner, , 20mm grit stone (broken by crusher), , 12/10/6mm grit stone broken by crusher., , brick ballast, , child card deduction in any neet prediction, , 3-40 mm crushed stone aggregate (voids cart 1/11, , 3-40mm hand broken stone rod (cut voice 1/11), , 0-45mm. hand broken stone aggregate (voids cart 1/11), , val (voids cart 1/6), , (cut the voice 1/6), , edging material(pi 4-6)(cut voice 1/6), , 144.511/30 cm), , dharm category (1st class), , although, , (pora devasi), , , ii class, , soling / kharanja / masonry stone, , chinrai beradda (rr), , masonry course (cr), , kharanja soling (for flooring work upto 15cm height), , kharanja soling (23cm height saikhara, , jodhpuri type stone slats / ghap / katal pieces (length 2-3', width 10-12", thickness 2.5-3.5"), , flaky material (3-4" thick & length and width 1-2"), , sandstone (dpc, sili, coping, linter, anu, an, , up to 25mm thickness, , up to 25-40mm thickness, , upto 40-50mm thickness, , up to 50-75mm thickness, , up to 175-100mm thickness, , upto 100-150mm thickness, , floor / strip paving stone, , floor planks upto 35mm thick, min. 3 sqft or more area, , katla for strip paving 60-75mm thickness, min. 3 sqft or more area, , unpolished rough kota stone, , upto 900 sq.cm, , 901 to 2300 sq. cm, , more than 2300 sq.cm, , gojish kota slolawek pradesh polish, , upto 900 sq.cm, , 901 to 2300 sq. cm, , more than 2300 sq.cm, , marble stone (makrana adanga 20mm thick), , 900 square meters, , 901 to 2300 sq. cm, , more than 2300 sq.cm, , marble chips, , marble powder, , marble stone (rajnagar ii quality/local 20mm thick), , upto 300 sq.cm, , 201 to 2300 sq. cm, , more than 2300 sq.cm, , single patam size 100 x 75mm., , double patam size 125 x 75 mm., , stone slabs, , up to 1.5 m length, minimum 40mm thick, , 5 m to 2.40 m length, minimum 50mm thick, , .4 m to 3.0 m length, minimura 65mm thick, , above 3.0 m length, minimum 75mm thick, , precast tiles/blocks, , glazed size-30x45 cm, , mosaic size-40mm thick, , vitrified size-60x60 cm, , interlock tiles/brick/block for road work, , tacking block m-30grade, 60mm thick, , cement interlocking block m-30grade, 80mm thick, , cement interlocking block m-30grade, 100mm thick, , pvc insulated copper conductor single core cable isi marked fr papaya, , 1.50 sq mm., , 12.50 said that c, , 0.50 sq mm., , 1.00 sq mm., , 4.00 sq. mm., , 5.00 sq. mm., , 17, , doors made of local wood with fittings, wood and tiles, , 17.1, , mango, , 17.2, , acacia, , 17.3, , other, , 17.4, , factory made doors (30mm thick, solid core single leaf), , 18, , structural steel, , 18.1, , iron (tor steel fe 415/500 for reinforcement), , 18.2, , winding wire 18 gauge, , 18.3, , iron guard, , 18.4, , conical iron/square bar/leaf/angle iron, , barbed iron wire (size 12 guage wire and 12 guage strad/12 guage wire and, , 18.5, , 14 guage strad/14 guage, , 119, , drain, , 19.1, , iron mesh (24 gauge, 14 mesh), , 20, , glass, , pani yakash gannal 10mm beads, , 20.1, , 3 mm thick glass, , 21, , complexion belly, , 21.1, , inamil paint, , 21.2, , distepar (water bound), , 21.3, , for lime plastering (aras / kali), , 21.4, , primer (for iron / wood), , petroleum products, , 2, , 2.1, , diesel hsd, , 2.2, , mobil oil, , 2.3, , bitumen shalitax board (25 mm thick), , 3, , plain sheet, , 3.1, , gi sheet 22 gauge (0.80 mm), , 3.2, , j.j. sheet 24 gunj (0.63 mm), , ms sheet 22 gauge (0.80 mm), , , m.s. sheet 24 gauge (0.63 mm), , gi sheet 1mm thick, , gi sheet 22 gauge (0.80 m.m.), , asvest cement sheet 6mm (2.5/2.75x1m), , other sheets, , pa.wa.sa. blanket mm ??? ???, , lightruf expo sheet green yellow (183x

State Government

CTN :40053822 Due date: 28 Apr, 202528 Apr, 2025 1.00 Crore
Tender For rate contract for goods and equipment supply work for fy 2025-26-, 1, , paila/kankar/jhajhra, , 2, , mud masala, , 3, , lime from kali bhatta for lime masonry work, , 4, , cement, , 4.1, , ppc, , 4.2, , white cement, , 5, , fine aggregate, , 5.1, , sand/gravel, , 5.2, , gravel - local, , 5.3, , rakhi (fly ash), , 5.4, , surkhi, , 5.5, , stone dust (in masonry work), , 6 ballast stone/brick (for other than road work), , 6.1, , 40mm measuring stone (hand broken grit) (cut voids 1/11), , 6.2, , 6.3, , 6.4, , 6.5, , 7, , 40mm grit stone (broken by crusher) (cut voids 1/11), , 20mm grit stone (broken by crusher), , 12/10/6mm grit stone (broken by crusher), , brick mortar, , material for road work (including 5 km lead), , 7.1, , 63-40 mm crusher broken stone aggregate (cut voids 1/11, , 7.2, , 63-40mm hand broken stone aggregate (cut voids 1/11), , 7.3, , 90-45mm. hand broken stone aggregate (cut voids 1/11), , 7.4, , quarry rubbish (cut voids 1/6), , 7.5, , gravel (voice kart 1/6), , 7.6, , kankar (cut wads 1/6), , 7.7, , binding material (pi 4-6) (cut voids 1/6), , 8, , bricks (22.5 x 11 x 7.50 cm), , 8.1, , first class, , the ii class, , soling / kharanja / masonry stone, , chinnai berdha (rr), , masonry course (cr), , kharanja soling (for flooring work upto 15cm height), , kharanja soling (23cm height for road/kharanja work), , jodhpuri type stone strips / arches / planks (length 2-3', width 10-12", thickness 2.5-3.5"), , flaky material (3-4" thick & length and width 1-2"), , sandstone (dpc, sill, coping, lintel, tand, almirha etc), , up to 25mm thickness, , up to 25-40mm thickness, , upto 40-50mm thickness, , up to 50-75mm thickness, , upto 75-100mm thickness, , upto 100-150mm) thickness, , floor / strip paving stone, , floor planks upto 35mm thick, min. 3 sqft or more area, , katla for strip paving 60-75mm thickness, min. 3 sqft or more area, , unpolished rough kota stone, , upto 900 sq.cm, , 901 to 2300 sq. cm, , more than 2300 sq.cm, , polished kota stone (one side polished), , upto 900 sq.cm, , 901 to 2300 sq. cm, , more than 2300 sq.cm, , marble stone (makrana adanga 20mm thick), , upto 900 sq.cm, , 901 to 2300 sq. cm, , more than 2300 sq.cm, , marble chips, , marble powder, , narbal stone (rajnagar ii quality/ local 20mm thick), , upto 200 sq.cm, , 01 to 2300 sq.cm, , more than 300 sq. cm, , stone frame, , kal paitham size 100 x 75 mm., , force plate size 125 x 75 mm., , stone slabs, , p to 1.5 m length, minimum 40mm thick, , 5 m to 2.40 m length, minimum 50mm thick, , 4 m to 3.0 m length, minimum 65mm thick, , above 3.0 m length, minimum 75mm thick, , precast tiles/blocks, , glazed size-30x45 cm, , mosaic size-40mm thick, , vitrified size-60x60 cm, , interlock tiles/brick/block for road work, , - cement interlocking block m-30grade, 60mm thick, , cement interlocking block m-30grade, 80mm thick, , cement interlocking block m-30grade, 100mm thick, , fr pvc insulated copper conductor single core cable isi marked, , 1.50 sq mm., , 2.50 sq mm., , 0.50 sq mm., , 1.00 sq mm., , 4.00 sq. mm., , 6.00 sq. mm., , local wood with fittings (for doors, windows and furniture), , mango, , acacia, , other, , factory made doors (30mm thick, solid core single leaf), , structural steel, , iron (tor steel fe 415/500 for reinforcement), , winding wire 18 gauge, , iron guard, , conical iron/square bar/patti/angle iron, , barbed iron wire (size 12 guage wire and 12 guage strad/12 guage wire and, , 14 guage strad/14 guage, , forged, , iron mesh (24 gauge, 14 mesh), , cement concrete lattice sky underworld 40mm thick, , lass, , mm thick glass, , c-paint, , namil paint, , distemper (water bound), , lime - for whitewashing (aras / bud), , primer (for iron / wood), , petroleum products, , diesel hsd, , mobil oil, , bitumen shalitax board (25 mm thick), , plain sheet, , gi sheet 22 gauge (0.80 mm), , gi sheet 24 gauge (0.63 mm), , m.s. sheet 22 gauge (0.80 mm), , and, , format, , gram panchayat, thalwa, , , m.s. sheet 24 gauge (0.63 mm), , corrug

State Government

CTN :40052796 Due date: 26 Apr, 202526 Apr, 2025 80.00 Lacs
Tender For 01rate for supply of construction material under village panchayat kunwaria-, , ghadla/kankar/jhajhra , , mortar and mud , , lime from kali bhatta for lime masonry work , , cement , , ppc , , white cement , , fine aggregate , , sand/gravel , , gravel local , , rakhi (fly ash) , , surkhi , , stone dust (in masonry work) , , ballast stone/brick (for other than road work) , , 40mm measuring stone (hand broken grit) (cut voids 1/11) , , 40mm grit stone (broken by crusher) (cut voids 1/11) , , 20mm grit stone (broken by crusher) , , 12/10/6mm grit stone (broken by crusher) , , brick mortar , , material for road work (including 5 km lead) , 63-40 mm crushed stone aggregate (voids carte 1/11) , , 63-40mm hand broken stone aggregate (voids cart 1/11 , , 90-45 mm. hand broken stone aggregate (voids cart 1/11 , , quarry rubbish (cut voids 1/6) , , gravel (cut voids 1/6) , , conker (cut voids 1/6) , , binding material (pi4-6) (cut voids 1/6) , , brick (22.5 x 11 x 7.50 cm) , , first class , , ?second class (ii class) , , soling / kharanja / masonry stone , , chinrai beradda (rr) , , masonry course (cr) , , kharanja soling (for flooring work upto 15cm height) , , kharanja soling (23cm height for road/kharanja work) , , jodhpuri type stone strips / arches / planks (length 2-3', width 10-12", thickness 2.5-3.5") , , flaky material (3-4" thick & length and width 1-2") , , sandstone (dpc, sill, coping, lintel, tand, almirha etc) , , up to 25mm thickness , , up to 25-40mm thickness , , upto 40-50mm thickness , , up to 50-75mm thickness , , upto 75-100mm thickness , , upto 100-150mm thickness , , floor / strip paving stone , , floor planks upto 35mm thick, min. 3 sqft or more area , , katla for strip paving 60-75mm thickness, min. 3 sqft or more area , , unpolished rough kota stone , , upto 900 sq.cm , , 901 to 2300 sq. cm , , more than 2300 sq.cm , , polished kota stone (one side polished) , , upto 900 sq.cm , , 901 to 2300 sq. cm , , more than 2300 sq.cm , , marble stone (makrana adanga 20mm thick) , , upto 900 sq.cm , , 901 to 2300 sq. cm , , more than 2300 sq.cm , , marble chips , , marble powder , , marble stone (rajnagar || quality/local 20mm thick) , , upto 900 sq.cm , , 901 to 2300 sq. cm. , , more than 2300 sq.cm , , stone frame , , single patam size 100 x 75mm. , , double patam size 125 x 75 mm. , , stone slabs , , up to 1.5 m length, minimum 40mm thick , , 1.5 m to 2.40 m length, minimum 50mm thick , , 2.4 m to 3.0 m length, minimum 65mm thick , , above 3.0 m length, minimum 75mm thick , , precast tiles/blocks , , glazed size-30x45 cm , , mosaic size-40mm thick , , vitrified size-60x60 cm , , interlock tiles/brick/block for road work , , cement interlocking block m-30grade, 60mm thick , , cement interlocking block m-30grade, 80mm thick , , cement interlocking block m-30grade, 100mm thick , , fr pvc insulated copper conductor single core cable isi marked , , 1.50 sq mm. , , 2.50 sq mm. , , 0.50 sq mm. , , 1.00 sq mm. , , 4.00 sq. mm. , , 6.00 sq. mm. , , local wood with fittings (for doors, windows and furniture) , , mango , , acacia , , other , , factory made doors (30mm thick, solid core single leaf) , , structural steel , , iron (tor steel fe 415/500 for reinforcement) , , winding wire 18 gauge , , iron guard , , conical iron/square bar/leaf/angle iron , , barbed iron wire(size 12 guage wire and 12 guage strad/12 guage wire and 14 guage strad/14 guage , , forged , , iron mesh (24 gauge, 14 mesh) , , cement concrete lattice sky underworld 40mm thick , , glass , , 3 mm thick glass , , color paint , , inamil paint , , distemper (water bound) , , for lime whitewashing(aras/kali) , , primer (for iron / wood) , , petroleum products , , , diesel hsd , , mobil oil , , bitumen shalitax board (25 mm thick) , , plain sheet , , gi sheet 22 gauge (0.80 mm) , , gi sheet 24 gauge (0.63 mm) , , m.s. sheet 22 gauge (0.80 mm) , , m.s. sheet 24 gauge (0.63 mm) , , corrugated sheet , , gi sheet 1mm thick , , gi sheet 22 gauge (0.80 m.m.) , , asves
 Loading, Please wait...

Connect us via What's Up