Latest pvc fitting Tenders | Government pvc fitting Tenders

CTN :40153854

15 May, 2025 28.00 Lacs

Ayodhya - Uttar Pradesh

Tender For supply, installation, testing and commissioning dismantling joint

State Government

CTN :40071835

19 May, 2025 NA

Birbhum - West Bengal

Tender For providing and installation of electro-mechanical accessories at cwr site and allieds works at ekpara pwss, block-rampurhat-i under bolpur mechanical division - supply and delivery of openwell submersible pumping machinery set suitable for wet pit installation complete with stainer along with all accessories with following specification: pump : discharge (q) : (1800-1280) m3/hr. & head (h) : (19-38) mtrs.method of starting : sd, shaft-stainless steel-ss-304, impeller- crome steel/ci/s.s / bronze, suc & del size- 90/80 mm dia, type of position-horizontal. mechanical sealmotor : 12.5hp (suitable for open well)operating voltage : 415 ( 10 %), phase : 3ph, 50 hz 6%speed : 2800 rpm, method of starting : s/dmake : ksb / grundfos / texmo / cri / kbl / mbh / or any approved vendor. ( n.b : manufacturers test certificate along with charecteristics curve, moc and gurantee certyificate have to be submitted at the time of delivery.), supply & delivery at site of 35 mm x 3.5 core size aluminum armored, xlpe insulated 1.1 k.v. grade cable, conforming to is 7098(i) as per direction of eic.(make:- gloster / polycab / mescab / or any approved vendor list of phed.) ( n.b : manufacturers test certificate have to be submitted at the time of delivery.), supply & delivery of 100a kit-kat rewireable (porcelain fuse carrier & base) (make:- havells / l&t / or any approved vendor list of phed.), supply & delivery of 100 amps re-wireable porcelain fuse unit type tpn main switch with steel sheet enclosure (conforms: is/iec600947-1&3). (make: havells /approved vendor list of phed.), supply & delivery of re-wireable type tpn changeover switch 100 amps 415v, 50hz, 4 pole offload with steel sheet enclosure (conforms: is/iec60947-1&3). (make: havells /approved vendor list of phed.), 100 amps, 4way, wall mounted copper busbar chamber with steel sheet enclosure (conforms:is/iec:60947-3). (make: havells /approved vendor list of phed.), supply and delivery of the following pipes, valves, pipes and gauges etc at site-- (make: approved vendor list of phed.), 100mm dia m.s. black pipe p/e conforming to is:1239 part-1 (2004), heavy (c class)., 150mm dia m.s. black pipe p/e conforming to is:1239 part-1 (2004), heavy (c class)., 100mm dia m.s. blank flange 15mm thick perforated as per is1538., heavy type suitable dia. ms suspension clamp along with nuts bolts and washers., 100mm dia. cast iron double flanged manually operated rising spindle type sluice valve generally conforming to is: 14846, having body, door, dome / bonnet, gland in graded cast iron to is 210 gr. fg 260, four faces of ss aisi 304 and spindle nut of gunmetal to is 318 gr. ltb 2, outside screw rising stainless steel aisi 304 spindle, valves suitable for a maximum working pressure of 10 kg/cm (seat test) & body tested to 15 kg/cm . flanges faced and drilled to is:1538 table 4 & 6. valves tested by closed end method only. (moc & tc needed for valve)., 100mm dia. cast iron double flanged single door swing non-return valve generally conforming to is:5312 part i, having body, door, cover in graded cast iron to is 210 gr. fg 260; body & door rings of stainless steel to ss aisi 304 , hinge pin of ss aisi 304, valves suitable for a maximum working pressure of 10 kg/cm (seat test) & body tested to 15 kg/cm . flanges drilled to is 1538 table 4 & 6.(moc & tc needed for valve)., 100 mm dia dismantling joint pn-1.0 ci dismantling joint complete galvanised , stud, nut and washer and follower flanges, drilled to is:1538 table 4 & 6. ( at delivery side of pump ), supply & fixing of perforated gi cable tray tee with perforation not more than 17.5% suspended from ceiling with two nos. suspenders & 25x25x3mm angle iron for supporting the cross member incl. s&f gi connector, 6mm dia ms suspender, bolts & nuts, steel fastener etc. as required of the following size. incl. al painting of ms support. [200x50x1.25mm x 3mtr long (18swg)] [app

CTN :40065853

09 May, 2025 NA

Hooghly - West Bengal

Tender For supply of disconnecting and taking out defective under ground lt cable from trenches , supply laying testing and connecting xlpe sheathedpvc insulated screened pvc beddedgalvanised steel strip , all as per boq item no 200 here in before but of size 40 core 16 sqmm complete all as specified , all as per boq item no 200 here in before but of size 35 core 25 sqmm complete all as specified , all as per boq item no 200 here in before but of size 35 core 50 sqmm complete all as specified , all as per boq item no 200 here in before but of size 35 core 70 sqmm complete all as specified , all as per boq item no 200 here in before but of size 35 core 95 sqmm complete all as specified , laying only and connecting xlpe sheathedpvc insulated screened steel strip of wire armoured electric power cable , all as per boq item no 800 hereinbefore but of size 40 core 16 sqmm complete all as specified , all as per boq item no 800 hereinbefore but of size 35 core 25 sqmm complete all as specified , all as per boq item no 800 hereinbefore but of size 35 core 50 sqmm complete all as specified , all as per boq item no 800 hereinbefore but of size 35 core 70 sqmm complete all as specified , excavating in trenches nexc 15 m wide and nexc 15 m depth for foundation etc or for shafts wells cesspits manhole pier hole , returning filling in including spreading levelling watering and well ramming in layers not exc 250mm in soft loose soil complete all as specified and as directed , removing excavated materials soils not exc 5000 mtr and depositing where directed at a level not exc 150 mtr above the starting point in soil complete all as specified and as directed , mandl sand cushioning dry in trenches for protection of ug cables below above and around the ug cable laid in trenches , mandl for fly ash bricks locally available laid dry width wise across the line of cable in trenches for protection of ug cable , supplying and fixing galvanised mild steel pipe tubing light grade complete with all fittings of 80 mm bore dia , supplying and fixing galvanised mild steel pipe tubing light grade complete with all fittings of 50 mm bore dia , supplying and fixing galvanised mild steel pipe tubing light grade complete with all fittings of 100 mm bore dia , m and l for boring of horizontal hole under road pavement hardstanding suitable for passing through up to 80 mm bore , mandl for straight through joint heat shrinkable complete suitable for lt 1100 volt aluminium conductor cable , mandl for straight through joint heat shrinkable complete suitable for lt 1100 volt aluminium conductor cable of size35 4 x 2550 sqmm , mandl for straight through joint heat shrinkable complete suitable for lt 1100 volt aluminium conductor cable of size35 x 70150 sqmm , supplying and fixing high density polyethylene pipes hdpe of pressure rating 6 kgf cm2 complete with all fittings of 25 mm bore dia , supplying and fixing high density polyethylene pipes hdpe of pressure rating 6 kgf cm2 complete with all fittings of 40 mm bore dia , supplying and fixing high density polyethylene pipes hdpe of pressure rating 6 kgf cm2 complete with all fittings of 50 mm bore dia , supplying and fixing high density polyethylene pipes hdpe of pressure rating 6 kgf cm2 complete with all fittings of 100 mm bore dia , material and labour for earthing complete with galvanised steel earth plate electrode 600x600x6 mm mm buried directly in ground , dismantling existing lt panels of any type any size carefully for reuse including necessary excavation demolition of concrete , labour only for disconnecting isolating and taking out burned unserviceable lugs switchgear metering devices wiring bus bar etc , supply only the followings to be incorporated against item no 3000 and 3100 only 06 sqmm to 16 sqmm , 25 sqmm to 50 sqmm , 70 sqmm to 95 sqmm , 120 sqmm to 240 sqmm , epoxy type insulator upto 1100volt for lt panel bus bar including nut bolts etc complete all as specified and as directed , single core stranded copper c

CTN :40065854

09 May, 2025 NA

Hooghly - West Bengal

Tender For supply of disconnecting and taking out defective under ground lt cable from trenches pole pipe floor wall etc including bricks gi pipes and removing from work site , supply laying testing and connecting xlpe sheathed cable heavy duty with stranded aluminium conductor 1100 volt grade of size 4.0 core 10 sqmm. , all as per boq item no 2.00 here in before but of size 4.0 core 16 sqmm. complete all as specified , all as per boq item no 2.00 here in before but of size 3.5 core 25 sqmm. complete all as specified , all as per boq item no 2.00 here in before but of size 3.5 core 50 sqmm. complete all as specified , all as per boq item no 2.00 here in before but of size 3.5 core 70 sqmm. complete all as specified , all as per boq item no 2.00 here in before but of size 3.5 core 95 sqmm. complete all as specified , laying only and connecting xlpe sheathed heavy duty with stranded aluminium conductor 1100 volt grade of size 4 core 10 sqmm , all as per boq item no 8.00 here in before but of size 4.0 core 16 sqmm. complete all as specified , all as per boq item no 8.00 here in before but of size 3.5 core 25 sqmm. complete all as specified , all as per boq item no 8.00 here in before but of size 3.5 core 50 sqmm. complete all as specified , all as per boq item no 8.00 here in before but of size 3.5 core 70 sqmm. complete all as specified , excavating in trenches n.exc 1.5 m wide and n.exc 1.5 m depth for foundation etc or for shafts wells cesspits manhole pier hole , returning filling in including spreading levelling watering and well ramming in layers not exc. 250mm in soft loose soil complete all as specified and as directed. , removing excavated materials soils not exc. 50.00 mtr and depositing where directed at a level not exc. 1.50 mtr above the starting point in soil complete all as specified and as directed. , m and l sand cushioning dry in trenches for protec tion of ug cables below above and around the ug cable laid in trenches of 230mm , m and l for fly ash bricks locally available laid dry width wise across the line of cable in trenches for protection of ug cable complete all as specified and as directed. , supplying and fixing galvanised mild steel pipe tubing light grade complete with all fittings of 80 mm bore dia laid in trenches under roads fixed to poles , supplying and fixing galvanised mild steel pipe tubing light grade complete with all fittings of 50 mm bore dia laid in trenches under roads fixed to poles , supplying and fixing galvanised mild steel pipe tubing light grade complete with all fittings of 100 mm bore dia laid in trenches under roads fixed to poles , m and l for boring of horizontal hole under road pavement hardstanding suitable for passing through up to 80 mm bore complete all as specified. , m and l for straight through joint heat shrinkable complete suitable for lt 1100 volt aluminium conductor cable of size3.5 4 x 10 16 sqmm , m and l for straight through joint heat shrinkable complete suitable for lt 1100 volt aluminium conductor cable of size3.5 4 x 25 50 sqmm , m and l for straight through joint heat shrinkable complete suitable for lt 1100 volt aluminium conductor cable of size3.5 x 70 150 sqmm , supplying and fixing high density polyethylene pipes hdpe of pressure rating 6 kgf cm2 complete with all fittings of 25 mm bore dia laid in trenches , supplying and fixing high density polyethylene pipes hdpe of pressure rating 6 kgf cm2 complete with all fittings of 40 mm bore dia laid in trenches , supplying and fixing high density polyethylene pipes hdpe of pressure rating 6 kgf cm2 complete with all fittings of 50 mm bore dia laid in trenches , supplying and fixing high density polyethylene pipes hdpe of pressure rating 6 kgf cm2 complete with all fittings of 100 mm bore dia laid in trenches , material and labour for earthing complete with galvanised steel earth plate electrode 600x600x6 mm mm buried directly in ground earth pit not less than 2.25m below ground level , dismantling existing lt panels of

CTN :40065878

09 May, 2025 NA

Hooghly - West Bengal

Tender For supply of disconnecting and taking out defective under ground lt cable from trenches pole pipe floor wall etc , supply laying testing and connecting xlpe sheathed pvc insulated screened pvc bedded galvanised steel strip of wire armoured electric power cable heavy duty , all as per boq item no 2.00 here in before but of size 4.0 core 16 sqmm. complete all as specified , all as per boq item no 2.00 here in before but of size 3.5 core 25 sqmm. complete all as specified , all as per boq item no 2.00 here in before but of size 3.5 core 50 sqmm. complete all as specified , all as per boq item no 2.00 here in before but of size 3.5 core 70 sqmm. complete all as specified , all as per boq item no 2.00 here in before but of size 3.5 core 95 sqmm. complete all as specified , laying only and connecting xlpe sheathed pvc insulated screened steel strip of wire armoured aluminium conductor 1100 volt grade of size 4 core 10 sqmm , all as per boq item no 8.00 here in before but of size 4.0 core 16 sqmm. complete all as specified , all as per boq item no 8.00 here in before but of size 3.5 core 25 sqmm. complete all as specified , all as per boq item no 8.00 here in before but of size 3.5 core 50 sqmm. complete all as specified , all as per boq item no 8.00 here in before but of size 3.5 core 70 sqmm. complete all as specified , excavating in trenches n.exc 1.5 m wide and n.exc 1.5 m depth for foundation etc or for shafts wells cesspits manhole pier hole taking out and laying of cable etc n.exc 10 sqm , returning filling in including spreading levelling watering and well ramming in layers not exc. 250mm in soft loose soil complete all as specified and as directed. , removing excavated materials soils not exc. 50.00 mtr and depositing where directed at a level not exc. 1.50 mtr above the starting point in soil complete all as specified and as directed. , m and l sand cushioning dry in trenches for protec tion of ug cables below above and around the ug cable laid in trenches of 230mm spread thickness , m and l for fly ash bricks locally available laid dry width wise across the line of cable in trenches for protection of ug cable complete all as specified and as directed. , taking down unsv gi hdpe pipe , s and fix 50 mm hdpe pipe of 6kgf c3 complete , supplying and fixing galvanised mild steel pipe tubing light grade complete with all fittings of 80 mm bore dia , supplying and fixing galvanised mild steel pipe tubing light grade complete with all fittings of 50 mm bore dia , supplying and fixing galvanised mild steel pipe tubing light grade complete with all fittings of 100 mm bore dia , m and l for boring of horizontal hole under road pavement hardstanding suitable for passing through up to 80 mm bore , m and l for straight through joint heat shrinkable complete suitable for lt 1100 volt aluminium conductor cable of size3.5 4 x 10 16sqmm , m and l for straight through joint heat shrinkable complete suitable for lt 1100 volt aluminium conductor cable of size3.5 4 x 25 50sqmm , m and l for straight through joint heat shrinkable complete suitable for lt 1100 volt aluminium conductor cable of size3.5 x 70 150sqmm , supplying and fixing high density polyethylene pipes hdpe of pressure rating 6 kgf cm2 complete with all fittings of 25 mm bore dia , supplying and fixing high density polyethylene pipes hdpe of pressure rating 6 kgf cm2 , supplying and fixing high density polyethylene pipes hdpe of pressure rating 6 kgf cm2 complete with all fittings of 50 mm bore dia , supplying and fixing high density polyethylene pipes hdpe of pressure rating 6 kgf , material and labour for earthing complete with galvanised steel earth plate electrode 600x600x6 mm , dismantling existing lt panels of any type any size carefully for reuse including necessary excavation demolition of concrete , labour only for disconnecting isolating and taking out burned unserviceable lugs switchgear metering devices wiring , 06 sqmm to 16 sqmm , 25 sqmm to 50 sqmm , 70 sqmm to 95 sqmm

CTN :39038232

01 May, 2025 13.18 Crore

Gandhinagar - Gujarat

Tender For corrigendum : supply of goods, tools & equipmentforan international standard itotin mechanic motor vehicle (mmv) tradeat iti tarsali, gujarat, india (package 3: mmv trade) - alternator assembly used for lmv working condition demonstration kit , starter motor assembly used for lmv working condition demonstration kit , electronic engine control module , fuel pump for mpfi working condition demonstration kit , inline fuel injection pump and rotor type fuel injection pump , demonstration board of 2wheeler ignition system. , demonstration board of electronic ignition system. , working condition of petrol mpfi engine assembly with fault simulation board , mpfi petrol engine with swiveling stand along with special tools for dismantling and assembling , demonstration board of mpfi system , ultrasonic injection cleaning equipment , working model of power windows , petrol engine motorcycle/scooter along with special tools and accessories , four stroke multi cylinder diesel engine in working condition , four stroke four cylinder crdi diesel engine in working condition , functional/experiment model of different type of sensors. , auto electrical test bench , cut section model of mock layout of a motor car -electrical system - working model , cut section working model of single plate clutch assembly. , cut section working model of diaphragm clutch assembly. , cut section working model of centrifugal clutch assembly. , front axle ( rezeppa joint) with stand for dismantling and assembly , rear axle with stand for dismantling and assembly , cut section model of synchronous gear box working , cut section model of sliding mesh gearbox working , cut section model of constant mesh gearbox working , full floating axle and semi- floating axle assembly , cut section working model of automatic transmission gear box , steering assembly - , 1. rack& pinion, , 2. worm& roller , 3. recirculating ball , 4. power steering , wheel alignment set up instrument-computerized , brake testing equipment (to test efficiency of vehicle where motion after braking is plotted) , motor vehicle in running condition (diesel heavy) with hydraulic power steering , light motor vehicle diesel crdi with electronic power steering and car a/c , engine dynamometer , four stroke multi cylinder engine mpfi petrol with cng kit set up in running condition , four cylinder four stroke diesel engine test rig with rope brake dynamometer , exhaust gas analyzer - diesel , training setup for adas systems , 4-wheel alignment set & hoist with advanced driver assistance systems (adas) complete frame targets , steel toolbox with lock and key (folding type) , punch letter , outside micrometer (0 25) , outside micrometer (25 50) , outside micrometer (50-75) , outside micrometer (75-100) , inside micrometer (25-50) , depth micrometer (0-25) , thread micrometer , adjustable micrometer sprit level to measure flatness, indication and taper with prismatic measuring base , vernier caliper , digital vernier caliper , vernier depth gauge , vernier bevel protractor, least count 5minutes , telescope gauge , dial test indicator plunger type (complete with clamping devices and stand) , universal surface gauge , cylinder bore gauge , compression testing gauge suitable for petrol engine. , vacuum gauge , granite surface plate , work bench , spanners socket with speed handle, t-bar, ratchet and universal , magneto spanner set , cylinder ridge cutter , vice grip pliers , torque wrenches , pneumatic tools set , car jet washer , pipe flaring tool , pipe cutting tool , universal puller for removing pulleys, bearings , stud extractor set of 3 , stud remover with socket handle , paraffin pressure gun , hand reamers adjustable , straight edge gauge , straight edge gauge , ladle , electric soldering iron , wire gauge (metric) , digital multi meter, 3 % digit (min), diode test mode and continuity mode, , growler , hydrometer , battery analyzer with printer , carburetor - solex, mikuni for dismantling a

CTN :40057914

25 Apr, 2025 NA

Mumbai - Maharashtra

Tender For work of repairs to the dismantling joint on delivery line of pump no 202 at malad pumping station

CTN :40066126

30 Apr, 2025 NA

Saharanpur - Uttar Pradesh

Tender For unit rate for installation of 1.0 hp submericble moter pump set and pvc fitting work at community/public/pink toilet and other site of nagar nigam area

State Government

CTN :40020656

24 Apr, 2025 13.72 Lacs

Dholpur - Rajasthan

Tender For 24-proposal for improvement of water supply existing system, by replacement of moter pump sets, lowering pipe , starters, dismantling joint and submersible cable in sub division city dholpur under division dholpur, distt. collector emergent works

CTN :40043220

23 Apr, 2025 4.17 Lacs

Hindupur - Andhra Pradesh

Tender For supply and delivery of gi, ci and pvc fitting for regular maintenance of water supply in hindupur municipality

Pvc Fitting Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government