Latest radar level gauge Tenders | Government radar level gauge Tenders

Central Government/Public Sector

CTN :41295643

22 Aug, 2025 NA

Pune - Maharashtra

Tender For gauge for plunger face/ face plate 19 mm. wear limit - 11 mm. required size - 1905 mm cur vature gauge with depth measurement ref. drg. no. w/bd - 355 & 359 and sk 94255 & sk 94256. material - tool steel, is 3748/90 hardness - 50/55 hrc. test certificate to be provided. supply with calibration certif icate - valid for min. 01 year issued from nabl approved lab. [ warranty period: 30 months after the dat e of delivery ]

Central Government/Public Sector

CTN :41295998

08 Aug, 2025 NA

Valsad - Gujarat

Tender For supply of wheel profile gauge suitable for measuring the following parameters in bg locos for measuri ng wear adopted/ thick profile measurements, 1) flange wear, 2) root wear, 3) thread wear, 4) wheel dia, 5) tyre thickness, 6) flatness ect., as per rdso drawing no. skdl-3592 alt-06 or latest if any. material: stai nless steel and hardened measuring tips. packed in a carrying wooden box. the gauge functionally confirm s to rdso drg. no. skdl 3592 alt- 6. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :41295874

12 Aug, 2025 NA

Kota - Rajasthan

Tender For wheel/tyre defect gauge for bg coaches as per railway boards approved irca part iv, rule 2.8.4 and plate 38, made of 3 mm thick hard alloy steel plate, used for inspection of condemn flange thick ness, root radius, sharp flange, deep flange, flatness of tread etc. of wheel profile. condemning flange thickness of 22 mm & flat face of 50 mm gauges are to be supplied in separate carrying case and workin g manual. the gauges shall be supplied with certification from nabl/nabl accredited or govt. approved la bs. first calibration valid for period two year ( warranty period : up to 30 months from the date of supply) [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :41274105

09 Aug, 2025 17.50 Lacs

Mumbai - Maharashtra

Tender For procurement of turbo drag pumping station and accessories - procurement of turbo drag pumping station and accessories, hicube neo hipace 80 dn 63 cf-f mvp030-3 turbo-molecular drag pumping station, diaphragm valve: for the above-mentioned pump-, connection flange: 25 iso-kf, type: diaphragm, housing: al, tightness: 1.0x10-9 mbar.l/s, conductance: 5 l/s, service life : 100000 operating cycles", uhv angle valve manual: connection flange: dn 40 cf-housing sealing: copper, valve seat sealing: copper feedthrough: bellow, housing: stainless steel, actuator: spindle, tightness: 1.0x10-10 mbar.l/s ,bakeout temperature valve open under vacuum: 400c, bakeout temperature valve close : 300c, weight; 3 kg, pkr 251 active, pirani/ cold cathode- full range transmitter dn 40 cf-f compatible with above required pump controller for reading the vacuum, pkr 251 active pirani/ cold cathode full range transmitter dn 25 iso-kf compatible with pump controller for reading the vacuum, sensor cable cg for single/dual/maxi gauge length: 3 m (for the above transmitters), corrugated hose flexible stainless steel dn 10 iso- kf length 2000 mm, corrugated hose flexible stainless steel dn 16 iso- kf length 2000 mm, copper gasket, dn 40 cf ofhc, copper gasket, dn 63 cf ofhc, operating fluid reservoir for hipace 80, rotary vacuum feedthrough with following specifications: -connection flange: 25 iso-kf pressure range: 1000 mbar to 1.0x10-8 mbar, shaft connection: 8 mm shaft load, radial: 150n shaft load, axial: 50n, transferred torque: 6 nm, clamping ring for elastomer seal (screw type) aluminium adc 12 for, dn 10 -16 iso kf, clamping ring for elastomer seal (screw type) aluminium adc 12 for, dn 20 -25 iso kf, clamping ring for elastomer seal aluminium adc 12 for dn 32-40 iso kf, o-ring, dn 16 iso-kf fkm, pack of 10 pcs, o-ring, dn 25 iso-kf fkm, pack of 10 pcs, o-ring, dn 40 iso-kf fkm, pack of 10 pcs, centering ring, stainless steel 304/1.4301, fkm, dn 16 iso-kf, centering ring, stainless steel 304/1.4301, fkm, dn 25 iso-kf, centering ring, stainless steel 304/1.4301, fkm, dn 40 iso-kf, centering ring, stainless steel 304/1.4301, fkm, dn 10 iso-kf, o-ring, dn 10 iso-kf fkm, pack of 10 pcs - procurement of turbo drag pumping station and accessories, hicube neo hipace 80 dn 63 cf-f mvp030-3 turbo-molecular drag pumping station, diaphragm valve: for the above-mentioned pump-, connection flange: 25 iso-kf, type: diaphragm, housing: al, tightness: 1.0x10-9 mbar.l/s, conductance: 5 l/s, service life : 100000 operating cycles", uhv angle valve manual: connection flange: dn 40 cf-housing sealing: copper, valve seat sealing: copper feedthrough: bellow, housing: stainless steel, actuator: spindle, tightness: 1.0x10-10 mbar.l/s ,bakeout temperature valve open under vacuum: 400c, bakeout temperature valve close : 300c, weight; 3 kg, pkr 251 active, pirani/ cold cathode- full range transmitter dn 40 cf-f compatible with above required pump controller for reading the vacuum, pkr 251 active pirani/ cold cathode full range transmitter dn 25 iso-kf compatible with pump controller for reading the vacuum, sensor cable cg for single/dual/maxi gauge length: 3 m (for the above transmitters), corrugated hose flexible stainless steel dn 10 iso- kf length 2000 mm, corrugated hose flexible stainless steel dn 16 iso- kf length 2000 mm, copper gasket, dn 40 cf ofhc, copper gasket, dn 63 cf ofhc, operating fluid reservoir for hipace 80, rotary vacuum feedthrough with following specifications: -connection flange: 25 iso-kf pressure range: 1000 mbar to 1.0x10-8 mbar, shaft connection: 8 mm shaft load, radial: 150n shaft load, axial: 50n, transferred torque: 6 nm, clamping ring for elastomer seal (screw type) aluminium adc 12 for, dn 10 -16 iso kf, clamping ring for elastomer seal (screw type) aluminium adc 12 for, dn 20 -25 iso kf, clamping ring for elastomer seal aluminium adc 12 for dn 32-40 iso kf, o-ring, dn 16 iso-kf fkm, pack of 10 pcs, o-ring, dn 25 iso-kf fkm, pack of 10 pcs, o-ring,

Central Government/Public Sector

CTN :41164063

08 Aug, 2025 NA

Haridwar - Uttarakhand

Tender For corrigendum : supply of w96413904097 drg: 21391801010 rev: 02 pressure gauge with offset back connection and flush mounting, , w96413510609 pressure gauge stainless steel bourdon tube direct mounting bottom connection dial size

Central Government / Public Sector

CTN :41295860

22 Aug, 2025 NA

Multi City - Multi State

Tender For supply of ohe height and stagger gauge equipped with an advanced laser distance meter for broad gaug e 1676 mm, rugged stainless steel and aluminum construction (a) with hiltipd-e laser distance meter. (b)with implanta tion measurement bracket. (c) with super elevation measurement system. (d)with heighted mount for laser meter. (e) w ith laser visibility glasses. (f) with metallic storage box., as per attached specifications. ]

corporations/Associations/Others

CTN :41277675

07 Aug, 2025 NA

Pimpri - Maharashtra

Tender For 3/2025-26 estimated rates for uhwc instruments - estimated rate for instruments uhwc, technical specification of dressing tray with cover material should be stainless steel medical grade size 300*200*50mm with led, technical specification of dressing drums with cover 11 19 material should be stainless steel ss 304 capacity 0.945 liters should be seamless, technical specification of weighing machine (infant) capacity upto 20 kg resolution 10 gm. accuracy + 1to 10 gm. measuring position supine, sitting and standing. large lcd display, technical specification of surgical scissors made of stainless steel 150 mm, 6 inch size, technical specification of sphygmomanometer aneroid 300mm with cuffkey technical specifications:cuff: typically made of durable, washable material (e.g., nylon) and reinforced at the sides. size: ranges from child to adult sizes (small, medium, large, extra-large), and ideally, the cuff bladder length should be at least 80% of the patients arm circumference and the width at least 40%. fastening: usually features velcro or similar for a secure fit. bladder: inflatable bag within the cuff, connected to the inflation system. inflation system: bulb with a valve for inflating the bladder and a pressure release valve. gauge:aneroid: features a dial with a needle indicating pressure, usually graduated in 2 mmhg increments from 0 to 300 mmhg. digital: provides electronic readings of blood pressure and may include features like pulse rate measurement. tube: typically made of rubber or silicone, crack-resistant, with a length of around 70 cm. accuracy: aneroid gauges are generally calibrated to meet certain accuracy standards, such as +/- 3 mmhg. materials: materials used in sphygmomanometers must be durable, corrosion-resistant, and suitable for the intended use. environmental: sphygmomanometers are designed to function within specific temperature and humidity ranges, typically 5 to 40 c and 15 to 85% rh. , technical specification of sims retractor/depressor 1/2/3/4 size stainless steel material should be medical grade anticorrosive and nonmagnetic , technical specification of cheatle foreceps 8/10/12 size stainless steel material should be medical grade anticorrosive and nonmagnetic, technical specification of sponge holder 6/8/10/12 size stainless steel material should be medical grade anticorrosive and nonmagnetic , technical specification of plain forcep plain forcep of size 6/8 inchs stainless steel material should be medical grade anticorrosive and nonmagnetic , technical specification of tooth forcep tooth forcep of size 6/8 inchs stainless steel material should be medical grade anticorrosive and nonmagnetic , technical specification of needle holder 6/8 inchs long, locking stainless steel material should be medical grade anticorrosive and nonmagnetic , technical specification of stethoscope chest piece finish : black, machined stainless steel chest piece size : 1.75 inch / 4.4 cm chest piece technology : double sided diaphragm material :epoxy/fiberglass eartip type : soft sealing headset material : wide diameter aerospace alloy / anodized aluminium length : 28 inch stethoscope with extra ear plug & diapharm, technical specification of hub cutter the cutting blade of the cutter will be made of stainless the thickness of the blade will not be less than 0.5 mm one side sharpen to cut minimum of 10,000 cuts. all other metal if used in the hub cutter will be made of galvanized carbon steel which will withstand rusting even in rough weather with high humidity coastal region for a minimum of five year(is 277 of 2003 galvanized steel sheet specification) the sharp container should be made of polypropylene (pp) of not less than 4 mm thick and should be white/translucent. shape: the shape of the container will be such that the lid is tightened with the body. capacity range : able to destroy from hub of ad syringe with needles from 18-28 gauge diameter and from 10-25 mm length and fitted with all types of needle fitti

CTN :41274918

11 Aug, 2025 22.71 Lacs

Baramulla - Jammu And Kashmir

Tender For supply of str of op tr laxmi to patiyala - quick setting compound conforming to , supply only approved adhesive 0.5 by weight of cement mixed up pcc all as specified , natural manufatured sand , aggregate 5 to 8mm. , aggregate 20mm. , aggregate 40mm. , stone boulder 150 200mm unweathered naturally occuring angular or crushed hard rock ready to use , dressed stone of size width and height 150mm to 250mm and length 400 mm to 750mm ready to use for stone masonary. , ms tmt bars 12 mm dia conforming to is 1786 1985 , ms binding wire annealed not less than 0.9mm dia conforming to is 280 2006. , gabion baskets of size 3.0 m x1.00m x 1.00m h collapsible galvanised double twisted hexagonal shaped steel mechanically selvedged gabion basket , load bearing concrete solid blocks of size 400mm x 200 mm x 200 mm casted in design mix 1 2 4 to have a strength of m15. , rcc hume pipe single collar np -03 class conforming to is 458 2021 and is 1489 part i 1991 reaffirmed 2005 of 600 mm dia 2.50 mtr long complete. , pvc swr pipe single socketed with rubber ring 110mm dia and 3 mtr long , cement base paint. make duracem snowcem and british xtracem , the pre cast concrete u drain with size 500mm x 250mm x 375mm thickness 45 50mm , brick trowel steel 305 mm with handle. , plaster trowel with hard wooden handle isi marked. , galvanised iron pan mortar tasla 16 gauge 16 ninch dia minimum weight of 1.5 kg, , showel square nose 14 gauge tata high carbon steel product code svl 022 blade size 310 x 245 mm shaft size 710 mm fitted with strong steel crutched hard wooden handles , brick hammer 1.2kgs , mason trowel karchi , picks axes with chiesel and point ends kudali 14 cp nominal weight 3.0 kg, overall length minimum 595 mm with hard wooden handle. , phowrah with hard wooden handles with min weight 2.00 kgs , crowbar 25mm 5 feet long , rammer with wooden handle of wt 5 10 lbs , aluminum spirit level 6 inch , brick line , industrial safety helmet ratcht colour orange yellow type. make shelcom melcom akiton. , spectacles frameless with 99.9 uv protected scratcfh and impact resistant polycarbonate clear lens. , hand glove pairs having hppe cut 4 liner 13 gauge with black pu coating. make karam super safety. , reflective vest. make shelcom melcom akiton. , rain poncho camouflage pattern. make shalimaar equivalent. , mega phone am215m. make ahuja equivalent. , gum boot. make hilson velsafe wth.

CTN :41274920

11 Aug, 2025 29.08 Lacs

Baramulla - Jammu And Kashmir

Tender For supply of quick setting compound , supply only approved adhesive 0.5 per by weight of cement mixed up pcc all as specified and as per manufacturers instructions , natural manufatured sand , aggregate 5 to 8mm. , aggregate 20mm. stone aggregate to be crushed rock or gravel 20mm graded conforming to , aggregate 40mm. , stone boulder 150 200mm unweathered naturally occuring angular , dressed stone of size width and height 150mm to 250mm and length 400 mm to 750mm ready to use for stone masonary. , ms tmt bars 12 mm dia conforming to is 1786 , ms binding wire annealed not less than 0.9mm dia , gabion baskets of size 3.0 m x1.00m x 1.00m h , load bearing concrete solid blocks of size 400mm x 200 mm x 200 mm casted in design mix , rcc hume pipe single collar np 03 class , pvc swr pipe single socketed with rubber ring 110mm dia and 3 mtr long , cement base paint. make duracem snowcem and british xtracem , the pre cast concrete u drain with size 500mm x 250mm x 375mm thickness , brick trowel steel 305 mm with handle. , plaster trowel with hard wooden handle isi marked. , galvanised iron pan mortar tasla 16 gauge 16 inch dia minimum weight of 1.5 kg, , showel square nose 14 gauge tata high carbon steel , brick hammer 1.2kgs , mason trowel karchi , picks axes with chiesel and point ends kudali 14 cp nominal weight 3.0 kg overall length minimum 595 mm with hard wooden handle. , phowrah with hard wooden handles with min weight 2.00 kgs , crowbar 25mm 5 feet long , rammer with wooden handle of wt 5 10 lbs , aluminum spirit level 6 inc , brick line , industrial safety helmet ratcht colour orange yellow type.. , spectacles, frameless with 99.9 per uv protected scratcfh and impact resistant polycarbonate clear lens. , hand glove pairs having hppe cut 4 liner 13 gauge with black pu coating. , reflective vest. make shelcom melcom akiton. , rain poncho camouflage pattern. , mega phone am215m. , gum boot. make hilson velsafe wth.

CTN :41275894

09 Aug, 2025 NA

Parganas - West Bengal

Tender For tender for supply of pin cotter split ms 5mm 30mm long , pin 12mm dia x 75mm long , rope , manila h by l 3 strand gr-3 - 8mm dia , spike , bolt csk m10 x 35mm , cap valve , pin eccentric m16x75mm long , bolt csk head m16x65mm long , clamp , hose , screew driver 6 inch , pin 41.774mmx90mm long , v belt a-51 , scissors 8 in , bolt hex head m16 x 70mm long , brush steel wire scratch 64mm , ring coupling , clamp wire bolted double throat 12mm , clamp , hose with cheese headed bolt , pin locking , hammer , sledge double face , 3 kg , spike bridging , ring retaining nylon m8 , gauge , nut coupling , rope manila h by l 3 strands gr-3 , 64mm dia , patch fabric nylon kk200 , 150x600mm , sleeves flexible below type , abrasibe cloth emery or corundum is grit no 80 , strap saddle assy , gauge pressure 0 kpa to 49 kpa , clamp wire rope bolt double throated 16mm dia , wrench valve , pressure gauge , jacket life 92 cm , jackets life 102 cm , bag , repair (14-246) , crank , hand folding , connecting hose 10 mtr long , handle carrying with hook , slings rope swr 32 mm dia 9.1 m long , valve charging , wrench , special , hose connector polyvinyl chloride 25mm id x 31 mm od x 10 m long , packing case for float , machine pulling & lifting universal 3 tonne 1a , pedestal assembly(lifting jack) , rope , drum padestal , paulin assembly float , paulin assy launching roller

Radar Level Gauge Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government / Public Sector

corporations/Associations/Others