Latest radial lip seal Tenders | Government radial lip seal Tenders

Central Government/Public Sector

CTN :45167607

24 Jul, 2026 NA

Dankuni - West Bengal

Tender For supply & commissioning of 50/10t eot crane output shaft assembly consist- 01 no. lt wheel, 01 no. gear, 01 no. shaft, 02 nos bearing block, 04 nos bearing, 02 nos bearing cover, 04 nos distance piece, 01 no. lock plate, 02 nos key, 02 nos oil seal etc. with complete drawing. preliminary and rough drawing attached for reference. wheel, shaft and gear materials en9, bearing skf/fag. ndt and chemical test certificates issued by an nabl or govt. recognized lab must be submitted. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :45166181

28 May, 2026 NA

Mumbai - Maharashtra

Tender For supply of poh kit for 0.5 hp self-priming monoblock pump for water raising purpose in i.r. coaches as per rdso specn.no. rdso/pe/spec/ac/0022(rev.0)-2002 with amdt.no.1.(seven items) 1) oil seal = 01 no 2) delivery flange gasket = 01 no 3) mechanical seal & circlip = 01 no 4) drain plug with washer = 01 no 5) "o" ring for shaft = 01 no 6) "o" ring for pump cover =01 no 7) nrv set = 01 no [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :45155234

16 May, 2026 NA

Ahmedabad - Gujarat

Tender For corrigendum : supply of rubber oil seal silicon size as 60x80x12 mm referance to drawing no. a3/2021/cnb/2773/5170/gk. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :45168113

16 May, 2026 NA

Ahmedabad - Gujarat

Tender For supply of rubber oil seal silicon size as 60x80x12 mm referance to drawing no. a3/2021/cnb/2773/5170/gk. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :45153015

28 May, 2026 NA

Erode - Tamil Nadu

Tender For supply of set of spares for wiper, each set consists of 05 items as follows. as per clw specification clw/ms/3/050 alt .6 (i) bearing and shaft assly as per clw drg no. 1209- 07.403-024. qty/set -04 no's (ii) seal flange as per clw drg no. 1209- 07.403-025. qty/set-04 no's (iii) gasket as per clw drg no. 1209-07.403-026, qty/set-04 no's (iv) oil seal as per clw drg. no. 1209-07.403-030, qty/set-04 no's (v) seal boss as per clw drg no. 1209-07.403-032, qty/set-04 no's. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :45154769

04 Jun, 2026 NA

Avadi - Tamil Nadu

Tender For supply of set of spares for elgi make rr15070 main compressor of 3-phase memu consisting of (1)cover fly end ,elgi part no-070307120 -01 no/set,(2)cover free end ,elgi part no-070307030-01 no/set,(3)filter element inner,elgi part no-0703015520-02 nos/set,(4)filter element outer, elgi part no-070315530-02 nos/set ,(5)seal,oil b50 x 72 x12 , elgi part no-000420360-02 nos/set [ warranty period: 30 months after the date of delivery ]

State Government

CTN :45147651

01 Jun, 2026 NA

Gandhinagar - Gujarat

Tender For supply of sector plate hot end (primary to secondary) for αρη τυρε 27.5 vimt 2000 sector plate hot end (gas to primary) for aph type 27.5 vimt 2000 sector plate hot end (gas to secondary) for aph type 27.5 vimt 2000 sector plate cold end (primary to secondary) for αρη τυρε 27.5 vimt 2000 sector plate cold end (gas to secondary) for aph type 27.5 vimt 2000 sector plate cold end (gas to primary) for aph type 27.5 vimt 2000 static seal assembly (hot end + cold end) for aph type 27.5 vimt 2000 radial seals (hot & cold ends) for air preheater 27.5 vimt 2000 by-pass seals for air preheater 27.5 vimt 2000 steam soot blower nozzle for apη τυρε 27.5vmit 2000 , over running clutch assembly for guide trunnion with bolts air preheater 27.5 vimt 2000/over running clutch fso-400 for aph type: 27.5 vmit 2000 fixing pin as per drg. no. 4-55-335-00983 p.a fan ap2-17/12 for unit no 3 & 4 of sikka tps rectangular ring as per drg no. 0-55-334-00661 for pa fan ap2-17/12 for unit no 3 & 4 of sikka tps cylindrical helical spring as per drg no. 4-55-214-00246 for p a fan ap2-17/12 for unit no 3 & 4 of sikka tps cheese head bolt m 16x50 as per drg no. 0-55-334-00661 for pa fan ap2-17/12 for unit no 3 & 4 of sikka tps nut as per drg. no. 4-55-335-00993 for pa fan ap2-17 /12 for unit no 3 & 4 of sikka tps bearing cover assy as per drg no. 0-55-335-00619 for pa fan ap2-17/12 for unit 3&4 of sikka tps distance ring as per drg no. 4-55-335-00859 for pa fan ap2-17/12 for unit no 3 & 4 of sikka tps sealing ring as per drg. no. 3-55-335-00651/01 for pa fan ap2 17/12 expansion delivery side drg no. 3-55-334-00673 for pa fan ap2-17/12 for unit 3&4 of sikka tps split thrust coller as per drg no. 2-56-134-01102 for id fan ndzv 33 sidor for unit no 3 & 4 of sikka tps end closure kit as per drg no:3-56-135-00911 for for id fans ndzv 33 sidor for unit no 3 & 4 of sikka tps. circlip sb 26, blade bearing assembly of forced draft fan tyρε αρ1 18/11 , hfo oil gun nozzle spray plate 90-j16 i,rsb traviirsii csain assiimbly radial brg 200fxm85 skf-61840 of hydraulic turning motor, item no. 6, drg-11150146000/6 for 250 mw of sikka tps unit no. 3&4. sleeve of hydraulic turning motor, item no. 9, drg νο. 11150146000/9 for 250 mw of sikka tps unit no. 3&4. shaft b48x44 of hydraulic turning motor, item no. 3, drg no. 11150146000/3 for 250 mw of sikka tps unit no. 3&4. shaft nut of hydraulic turning motor, item no. 11, drg no. 11150146000/11 for 250 mw of sikka tps unit no. 3&4. lock washer dia 55 skf-mb1155 of hydraulic turning motor, item no. 12, drg no. 11150146000/12 for 250 mw of sikka tps unit no. 3&4. ring of hydraulic turning motor, item no. 10, drg no. 11150146000/10 for 250 mw of sikka tps unit no. 3&4. scru cap soc a12.9 m10x75 of hydraulic turning motor, item no. 19, drg no. 11150146000/19 for 250 mw of sikka tps unit no. 384. scru cap p-8.8 m12x90 of hydraulic turning motor, item no. 20, drg no. 11150146000/20 for 250 mw of sikka tps unit no. 3&4. throttle valve of hydraulic turning motor, item no. 22, drg no. 01165524000/22 for 250 mw of sikka tps unit no. 3&4. scru cap p-8.8 m20x60 of journal bearing no. 2, item no. 16, drg no. 01170318000/16 for 250 mw of sikka tps unit no. 3&4.

Central Government/Public Sector

CTN :45083521

20 May, 2026 1.92 Lacs

Nagpur - Maharashtra

Tender For purchase of various miscellaneous items for gumgaon mine - pipe wrench - 24" , pipe wrench-18", , ring spanner -7/16"x9/16", , d e spanner 7/16 x 9/16, , grease gun-5 kg, , hydraulic jack - 50 t, , pad lock-50 mm, , pad lock-40 mm, , gi wire-16 swg, measuring tape - 3 m, , grinding wheel 5", , teflon tape - 1/2", , gas cylinder key, , cotton waste, , cutting electrodes -4.00 mm, , oil seal-60x90x13 mm, , cut off wheel 4"x5mmx16mm, , painting brush - 3", , adjustable screw wrench - 12", , de spanner set - 6 to 32 mm, , ring spanner set - 6 to 32 mm, , flat wire brush -2", , tool bit - 3/8"x4", , pvc suction pipe-2-1/2", , araldite-180 gms, , cut off wheel-125x3x22.23 mm, , hss power saw blade-18"x1 1/4", , anabond 666 t plus-100 gms, ms square bar - 50 mm, , tarpaulin - 30"x20", , tarpaulin - 15'x10', , allenkey spanner set - 1-1/2 mm το 10 mm, , allen key set inches, , hacksaw blade -12"x1/2", , combination plier -8", , wonder x-spray, , retro reflective tape red-50 mm, , retro reflective tape yellow -50 mm, , flat file (rough) -12", , round file (rough)-12", , triangular file (fine) - 12", , u clamp - 1/2" (12mm equivalent), , u clamp - 3/4", , u clamp -5/8" (16 mm equivalent), , cut off wheel-350x2.5x25.4mm, , nylon rope - 5/8"

State Government

CTN :45131088

20 May, 2026 NA

Surat - Gujarat

Tender For providing and laying road materials and machinery for various road under surat (r&b) division-1, surat. asphalt patch work and miscellaneous work of i.r and c.r. for annual rates (asphalt work) - providing and laying 50 mm thick compacted b.m. in single layer with b.t. aggregate as per morth specification and bitumen grade 60 or 70 (vg-30) for tack coat at 2.5 kg. or 10sq.mt. with mechanical sprayer and bitumen grade 60 or 70 (vg-30) for mixing at the rate 34.0kg or m.t. i.e. 3.4 percentage of total mix including heating the aggregate and asphalt by batch mix plant and spreading the same by manually patch work and consolidation with vibratory roller including providing all materials, equipments, tools and plants, oil, kerosene, fire wood, labour charges etc. complete for surat (r and b sub division no.2 surat), for sub division svr sub division, providing laying 20mm (compacted) thick mix seal surface premixed with bitumen grade 60 or 70 (vg-30) tack coat at 2.5 kg. or 10 sq.mt. with mechanical sprayer and bitumen grade 60 or 70 (vg-30) for mixing at 5.09 percent by weight of total mix and filler, bitumen during preparing of hot mit material in drum mix plant with all taxes and delivery at hot mix plant site, labour charges and or tools required and asphalt by drum mix plant and spreading the same by manually patch work and consolidation with vibratory roller including providing all materials, equipments, tools and plants, oil, kerosene, fire wood, labour charges etc. completefor surat (r and b sub division no.2 surat), for sub division svr subdivision, providing and laying 25 mm thick compacted s.d.b.c.with b.t. stone chips as per m.o.r.t.h. gradation and specification and bitumen grade 80 or 100 for mixing at the rate of 50 kg or m.t.by wt. of mix i.e.(5.0 percentage of total mix) (as per mix design) including the aggregate and asphalt by batch mix mix plant using including heating and spreading the same by manually patch work and consolidation with vibratory roller including providing all materials, equipments, tools and plants, oil, kerosene, fire wood, labour charges etc. complete.for surat (r and b sub division no.2 surat), for sub division svr subdivision, providing and applying asphalt painting on b.t. surface with mechanical sprayer using bitumen 60 or 70 (vg-30) at the rate of 5.00 kg or 10 sq.mt. and spreading stone dust on painting surface at the rate of 0.03 cu.m. or 10 sq.mt. and rolling with smooth wheeled and pneumatic roller and brushing etc. complete. for surat (r and b sub division no.2 surat), for sub division svr subdivision

corporations/Associations/Others

CTN :45022223

20 May, 2026 24.48 Lacs

Dehradune - Uttarakhand

Tender For procurement of consumables and various other items at chibro power station - ci foot valve2" with nipple, gun metal gate valve 3/4" dia, heavy duty, water working pressure 200 psi both side inner threaded. make-leader /l &t/ ksb, flexible rubber armoured hose pipe 2", single phase mono block pump 2.00 hp, make- crompton greaves/kirloskar, single phase starter for 2 hp pump make- l& t/crompton greaves, limit switch for tgb as per sample., safety shoes , man size ( as per required), make- allen couper/bata, dangri for man of good quality cloth, towel, make- bombay deying / raymond s, synthetic rubber hose pipe, oil proof heat resistant with nylon thread, conforming to is 7654/87 type 2,working pressure: 10 kg per sq cm, id: 20 mm, od: 32mm, length: 20 mtr, make: jyoti/indo/vardhman, ball bearing no. 6313, make: skf/nbc/fag, led indication lamp, universal type,24 volt (red+ yellow+ green), ecil make servo potentiometer continuous, wire wound type 3.5 cs, rechargeable 5w led torch 3.7v, 3000mah, brass float for tgb dia. 90 mm, h-150 mm as per sample, filler gauge 600 mm long, filler gauge 150 mm long, exhaust fan , single phase, having 300 mm dia., rpm- 1400, make: crompton greaves or equivalent, extension board suitable for 16 amp, 240 v, proximity sensor for miv open close indication, pvc insulated copper cable (sheathed) ,2 core ,size 1.5 mm ,1100 volts, as per is: 694 ,(91.44 meter. roll ), h.p. jointing sheet thickness 2 mm, width 1350 mm, h.compo/champion make, h.p. jointing sheet thickness 3 mm, width 1350 mm, h.compo/champion make, pressure gauge 0-10 kg/cm , dial size: 150 mm, panel mounting, threaded 3/8 bsp, make- baumer/ stico/wika, pressure gauge 0-21 kg/cm , dial size 150 mm, panel mounting, threaded 3/8 bsp, make-baumer/stico/wika, pressure gauge 0-40, ss shim thickness 0.05mm, width 14" bis standard, ss shim thickness 0.06mm, width 14" bis standard, ss shim thickness 0.07mm, width 14" bis standard, ss shim thickness 0.08mm, width 14" bis standard, ss shim thickness 0.10mm, width 14" bis standard, pvc flexible corrugated pipe dia., 2". bis standard, pvc flexible corrugated pipe dia., 1 ", l-30 meter bis standard, switching valve, hed 80a, make rexroth or other equivalent as per sample, solenoid coil, 220 volt d.c, 30 watt, i d-23 mm, height -50mm , make- rexroth or other equivalent as per sample, solenoid coil r901267189 220 volt dc , 42 watt, , make- rexroth or other equivalent as per sample, roller bearing no. nu 314, make skf/nbc/fag, pressure switch for type kps 39,make- danfoss or other equivalent as per sample, rain coat, stud, size: 5/8 x 125 mm long, bsf threaded 32 mm & 22 mm, material en-56c as per sample., hex head bolt size: 3/4 bsf x 114 mm long, half threaded, material en-56c as per sample., hex head bolt size: 5/8 bsf x 152.4 mm long, half threaded, material en-56c as per sample, plain washer, size: 5/8 , thickness 2 mm, id- 18 mm, od-40 mm as per sample, hex head brass bolt 1 bsf x 76 mm long with brass nut as per sample, s.s stud 5/8 bsfx 160 mm long with 2 no. hex nut & 2 no. washer as per sample, mechanical seal for pump model: t3s 80/54 nts xf s2 rnj ibalx. make- tushaco as per sample, double ended ms studs m 24- 2.5 as per sample, wire wound high pressure jointing sheet for oil line. thickness- 3 mm, width- 1350 mm. make - champion/ h. compo, wire wound high pressure jointing sheet for oil line. thickness- 4 mm, width- 1350 mm. make - champion/ h. compo, m- seal phataphat 1 kg pack, 7/8 bsf 76 mm long ss stud as per sample, 7/8 brass nut as per sample, 7/8 bsf 4 long socket head cap bolt as per sample, 7/8 spring washer as per sample, 1.1/4 bsf x 4 long hex head bolt as per sample, hex head bolt size 1 1/2 bsf x 135 long a/f=60mm , to be forged by material en24t as per sample, single phase portable welding machine, fevitite epoxy compound 180 gm pack, gland sealing segment set for 60 mw m/c made of ferobestos sheet as per sample, bearing 6310 skf/ tata make, c.i. foot valve 2 wit

Radial Lip Seal Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors