Tender For provision of new led street lights with allied accessories on existing poles at various dark spots in saidulajab ward no 160 under south zone - led street light fixture, powder coated pressure die cast aluminium body (system lumen efficacy >135 lm/watt). supplying, installation, testing & commissioning of street light led fixture, powder coated pressure die cast aluminium body with built in or separate driver as per the requirement with driver efficiency >85%, input voltage: 140-270 volt ac, frequency 50/60 hz, operating temp range -5 0c to 50 0c, internal surge protection of 5 kv l,n,e as per iec 61000-4-5, driver efficiency >85%,thd 10% as per iec 61000-3-2, p. f. 0.95, ip-66,ik-10, cri >70, under voltage and over voltage protection, emi-emc as per cispr-15, lenses for beam angle as per iesna type i/ii/iii as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (led,driver & electrical circuitary) of minimum 50000 burning hours with 70% of initial lumen maintained till life ends as per lm80 extrapolation ies tm-21-11 report, cct 3000 k / 4000 k / 5700 k /6500 k (as per ansi bin), sdcm(standard deviation color matching)5, maximum power consumption should not more than the specified rating and fixture shallbe of relevant bis standard complete in all respect i/c external connections with 1.5 sq mm frls/hffr, pvc insulated copper conductorsingle core cable and earthing etc. as required withminimum 5 year oem warranty. system lumen efficacy >135 lm/watt output . lm79 & lm80 testreport and all testing required for led fixturesas per bis shall be submitted.. shape size and cct shall be as approved by engineer-in-charge asper requirement. (thermal management: heat sink of aluminium housing such that led junction temperature shall not rise above 90 c). 45 watt , supply and fixing of 32mm dia x 1 meter long g.i. pipe (medium class) bracket for mounting of fluorescent/hpmv/hpsv street light fitting on pole including bending the pipe to the required shape , 2 nos 25mm x 6mm flat iron clamps with nuts, bolts and washer , painting the flat iron with primer and finish paint etc. as reqd, supplying and drawing following sizes of frls pvc insulated copper conductor, single core cable in the existing surface/ recessed steel/ pvc conduit as required. 3 x 1.5 sq. mm, supply of xlpe insulated pvc sheathed al. conductor un-armoured cable 1.1kv grade conforming to is-7098 of following size:-2c*4 sqmm, laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size in the existing masonry open duct as required. upto 35 sq. mm
Tender For provision of led light fittings with accessories at various locations in ward no. 167 khanpur, under south zone. - supplying and drawing following sizes of frls pvc insulated copper conductor, single core cable in the existing surface/ recessed steel/ pvc conduit as required. 3 x 1.5 sq. mm, supply and fixing of 32mm dia x 1 meter long g.i. pipe (medium class) bracket for mounting of fluorescent/hpmv/hpsv street light fitting on pole including bending the pipe to the required shape , 2 nos 25mm x 6mm flat iron clamps with nuts, bolts and washer , painting the flat iron with primer and finish paint etc. as reqd., supply of xlpe insulated pvc sheathed al. conductor un-armoured cable 1.1kv grade conforming to is-7098 of following size:-2c*4 sqmm, laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size in the existing masonry open duct as required. upto 35 sq. mm, led street light fixture, powder coated pressure die cast aluminum body (system lumen efficacy 135 lm/watt) supplying, installation, testing & commissioning of street light led fixture, powder coated pressure die cast aluminum body with built in or separate driver as per the requirement with driver efficiency >85%, input voltage: 140-270 volt ac, freq 50/60 hz, operating temp range -5 deg centigrade to 50 deg centigrade, internal surge protection of 5 kv l,n,e as per iec 61000-45, driver efficiency >85%,thd 10% as per iec 61000-3-2 , p. f. 0.95, ip66,ik-10, cri 70 , under voltage and over voltage protection,emi-emc as per cispr-15, lenses for beam angle as per iesna type i/ii/iii as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (led,driver & electrical circuitry) of minimum 50000 burning hours with 70% of initial lumen maintained till life ends as per lm80 extrapolation ies tm-21-11 report , cct 3000 k / 4000 k / 5700 k /6500 k (as per ansi bin) , sdcm(standard deviation color matching) 5, maximum power consumption should not more than the specified rating and fixture shall be of relevant bis standard complete in all respect i/c external connections with 1.5 sq mm frls/hffr, pvc insulated copper conductor single core cable and earthing etc. as required with minimum 5 year oem warranty. system lumen efficacy 135 lm/watt output . lm79 & lm80 test report and all testing required for led fixtures as per bis shall be submitted. shape size and cct shall be as approved by engineer-in-charge as per requirement. (thermal management: heat sink of aluminum housing such that led junction temperature shall not rise above 90 c). 45 watt
Tender For corrigendum : supply, installation, testing and commissioning of 30 watt led solar street light mounted on6 meter long 75 dia hot dip galvanized iron pole with 150 watt mono crystalline solar pv module mounting on galvanized ms angular frame, galvanized light mounting arm along with lifepo4 (lithium phosphate)battery of 12.8 volts and 36 amp capable of 24 hours redundancy with built-in auto dusk to dawn charge controller with in-built dimming capacity and required cables, hardware and ground fixing j bolts. the light colour is white and delivered lumen output is 3150 lumens. warranty: led light: 5 years, solar pv module: 25 years as per manufacturer?s warranty conditions, 3 years for lifepo4 battery as per manufacturer warranty and as per detailed specifications complete.. (detailed specification attached). ]
Tender For corrigendum : supply of illumination items package for hindalco lapanga unit# 7 - industrial type 15w led dc well glass luminaire suitable for 220v dc supply with features and accesories as per specification. industrial led well glass fixture 40w approx, 230v ac with minimum 4000 total lumen output and with features and accesories as per specification. led street lighting fixture 90w approx, 230v ac with minimum 9000 total lumen output and with features and accesories as per specification. 32nb, 120 deg bend pipe with 2 nos suitable clamp, base & hardwares as per drawing at annexure-1 2.5 meter gl lighting pole without base plate as per drawing at annexure-1 2.5 meter gi lighting pole with base plate as per drawing at annexure-1 cable clamps suitable for 3cx2.5sqmun ca. armoured cable cable clamps suitable for 3cx4 sqmm cu. armoured cable cable clamps suitable for 4c * 25 sqmın al armoured cable cable clamps suitable for 4c * 35 sqmm al. armoured cable 4 way 200x150x100mm rectangular polycarbonate weather proof jb (ip65 with cable entries suitable for 3cx2.5 sqmm. cu. armoured cable weatherproof ip65 isolation box outdoor type industrial metal clad type 1-ph, 20a, 240v socket with plug 415v, 63a, 3p+n+e, outdoor type industrial socket with 63a, 4p rccb (100ma) & plug. outdoor type industrial metal clad type 1-ph, 10a, 24v socket with plug 24v power supply module with 240/24v transformer portable type 24v power supply module with 240/24v transformer and 10a, 24v, 3 pin socket safe area hand lamp of 10w led 2.5sqmm cu. pvc insulated frls flexible wire lighting panel type-1 lighting panel type-2 lighting panel type-3 lighting panel type-4
Tender For supply of set of tools and equipment required for road art/brake down amla (details as per annexure). test certificate should be from nabl approved lab only. - unbranded cantilever tool box, 5 trays, tommy bar octagonal. size- 20mm x 600 mm long., material en8 as per attached drawing., hammer sledge double faced 3.2kgs is:841/1968 table-iii., ball pein hammer with handle conforming to is 841:1983 with latest amendments, specification: nominal mass-500 grams, handle- wood/polymer/fiberglass, material spec: steel grade t65/t70; handle length: maximum 350 mm but shall not be less than 300 mm., adjustable spanner 8", adjustable spanner 12", adjustable spanner 15", set of adjustable spanners & pipe wrenches of sizes 1) adjustable spanner size 10 inch/250mm qty/set-01 no 2) adjustable spanner size 15 inch/375mm- qty/set-01 no 3) pipe wrench size 24 inch/600mm- qty/set1no makes: fwrad0002-d & fwrrt0001-d of eastman or its equivalent of snapon, kingtony, taparia, or venus., wrench pipe chain capacity range 10 - 60,15-90,27 - 115,35-165, steel shovel with metal handle as per drawing number rwf/misc/m/1294, safety goggles designed to effortlessly fit over most prescription spectacles for convenience, temple adjustability enhances personalized fit and ergonomic, rigorously tested for optical quality, ignition resistance and high temperature durability, sterilized and fortified, ensuring technical durability and robustness, durable, clear, and scratch-resistant lens for precision optics and protection, lens scale no. clear:3-1.2, weight: approximately 54 grams, embodying lightweight precision in technical design, certified to en 166:2001 conforms to ansi 87.1-2010., accepted makes: karam es007 or black & dcor or 3m or midas or similar. accepted note: one sample to be got approved before bulk supply., magnifying glass with stand, lens size- 5", magnification- 4x area, 3.2 dioptre lens, reachstand internal concealed, spring mechanism with 900 mm reach from pivot and 600 mm in vertical plane reach from pivot 36" and 600 mm in vertical plane 24", illumination i) led ring with 40 leds in twin rings. ii) power consumption- 8 watts. iii) lumen output- 800lumens. iv) colour temperature-6000 degree kelvin v) nominal lux level at working plane 150 mm-2300 lux. along with accessories for each stand. i) increased magnification attachment dia -50 mm powerful additional lens that can swiung in the field view under the main lens. ii) spot lens dia-30 mm powerful additional lens that is permanently fused on the main lens to provide 16 x area magnification. brand- lensel optics model no - l104sd / greemito/toolstar, measuring tape with lock button size-5 meter (length) x 13 mm (width) case material-abs, blade material-carbon steel, case shape - round, tape colour-, black and white steel measuring tape 30 meter long graduated in mks & fps system to the fractions readable in mm & inch marking in full length of is certified company only, 15 cm spring steel scale, supply of manila rope of size 1 inch as per is:9936(1992). (note: required rope material is polymer braided twisted cord twine string in dia: 12mm) (required in 25mtr +25mtr sapratly), aluminum ladder 6 ft long, sand bucket, water bucket gi
Tender For bid to ras bid to ras corrigendum : supply of ethambutol 200 mg tab , pyrazinamide 1500 mg tab , medroxy progesterone 10 mg tab , salmeterol 50 mcg plus fluticasone 250 mcg multi dose dry powder inhaler of 60 , paraffin per 15 ml containing magnesium hydroxide 11 point 25 ml liq paraffin 3 point 75 ml , 2 point 3 percent sodium hyaluronate 0 point 60 ml average molecular weight 3200999 daltons classification viscoadaptive , emtricitabine 200 mg plus tenofovir 300 mg tab , antacid chewable containing dried aluminium hydroxide ip 250 mg mag hydroxide nf 250 mg methyl polysiloxane , clarithromycin 500 mg inj , triple lumen catherer kit cannula guide wire dilator introducer needle , flow meter for oxygen cylinder pin index type , tube endo tracheal catherer mount for , set of six hand niti tapered files 25 mm length with corresponding gutta percha points and paper points complete kit , reinforced quartz fibre post 0 kit complete with corresponding drills ) /bid number : gem/2026/b/7430814 * /dated: 13-04-2026 & & / bid document 1 / 18