Latest radiator fan shaft Tenders | Government radiator fan shaft Tenders

Central Government/Public Sector

CTN :45030365

29 May, 2026 NA

Cuddapah - Andhra Pradesh

Tender For supply of bonfigloli gear box spares on annual rate contract basis - model-1:model: as55 df p112, code: 1900000950717270002, batch:6/19, v1, i:33:2, application : i) neutralization tank agitator ii) precipitation tanks in chemical house iii) causticization tanks, casing with flange (part no. 2) for model-1, cover (part no. 3) for model-1, internal support (part no. 4) for model-1, gasket (part no. 5) for model-1, gasket (part no. 6) for model-1, extended 1st reduced pinion (part no. 7) for model-1, bored 1st reduced pinion (part no. 8) for model-1, gear wheel 1st reduction (part no. 9) for model-1, gear wheel 2nd reduction (part no. 10) for model-1, pinion 3rd reduction (part no. 11) for model-1, gear wheel (part no. 12) for model-1, cap (part no. 13) for model-1, bored input shaft (part no. 14) for model-1, oil seal (part no. 15) for model-1, oil seal (part no. 16) for model-1, gear head / box, in put assembly, out put assembly, bearing (part no. 20) for model-1, bearing (part no. 21) for model-1, bearing (part no. 22) for model-1, bearing (part no. 23) for model-1, bearing (part no. 24) for model-1, key (part no. 25) for model-1, key (part no. 26) for model-1, key (part no. 27) for model-1, key (part no. 28) for model-1, key (part no. 29) for model-1, level plug (part no. 30) for model-1, drain plug (part no. 31) for model-1, breather plug (part no. 32) for model-1, parallel pin (part no. 33) for model-1, parallel pin (part no. 34) for model-1, hex head screw (part no. 35) for model-1, hex head screw (part no. 36) for model-1, hex head screw (part no. 37) for model-1, circlip (part no. 38) for model-1, circlip (part no. 41) for model-1, circlip (part no. 42) for model-1, 2 nd reduction pinioin (part no. 45) for model-1, out put shaft (part no. 47) for model-1, spacer ring (part no. 48) for model-1, circlip (part no. 58) for model-1, circlip (part no. 39) for model-1, extended input shaft (part no. 50) for model-1, key (part no. 51) for model-1, input assembly, output assembly, model-2:as60 df p112, code: i 11799930001,batch:4/10, v1, i:37:1, application : feed tank agitator - ssr, casing with flange (part no. 2) for model-2, cover (part no. 3) for model-2, internal support (part no. 4) for model-2, gasket (part no. 5) for model-2, gasket (part no. 6) for model-2, extended 1st reduced pinion (part no. 7) for model-2, bored 1st reduced pinion (part no. 8) for model-2, gear wheel 1st reduction (part no. 9) for model-2, gear wheel 2nd reduction (part no. 10) for model-2, pinion 3rd reduction (part no. 11) for model-2, gear wheel (part no. 12) for model-2, cap (part no. 13) for model-2, bored input shaft (part no. 14) for model-2, oil seal (part no. 15) for model-2, oil seal (part no. 16) for model-2, gear head / box, in put assembly, out put assembly, bearing (part no. 20) for model-2, bearing (part no. 21) for model-2, bearing (part no. 22) for model-2, bearing (part no. 23) for model-2, bearing (part no. 24) for model-2, key (part no. 25) for model-2, key (part no. 26) for model-2, key (part no. 27) for model-2, key (part no. 28) for model-2, key (part no. 29) for model-2, level plug (part no. 30) for model-2, drain plug (part no. 31) for model-2, breather plug (part no. 32) for model-2, parallel pin (part no. 33) for model-2, parallel pin (part no. 34) for model-2, hex head screw (part no. 35) for model-2, hex head screw (part no. 36) for model-2, hex head screw (part no. 37) for model-2, circlip (part no. 38) for model-2, circlip (part no. 41) for model-2, circlip (part no. 42) for model-2, 2 nd reduction pinioin (part no. 45) for model-2, circlip (part no. 58) for model-2, circlip (part no. 39) for model-2, extended input shaft (part no. 50) for model-2, key (part no. 51) for model-2, spacer ring (part no. 46) for model-2, out put shaft (part no. 49) for model-2, circlip (part no. 57) for model-2, input assembly, output assembly, model-3:as60 df p132, code:i11800030001, batch:4/10, v1, i:33:4,application : i) filtrate tank

Central Government/Public Sector

CTN :45317902

04 Jun, 2026 1.09 Crore

Chhindwara - Madhya Pradesh

Tender For supply of input shaft hold back manufacturer part no.6290 , input shaft bearing cap manufacturer part no.2090 , input bearing cover spacing washer manufacturer part no.2390 , input shaft bushing manufacturer part no.2190 , input shaft oil seal hold back side manufacturer part no.7190 , input shaft with intigrated pinion and gear manufacturer part no.612690 , 1st stage intermediate shaft manufacturer part no.3190 , 1st stage intermediate shaft bearing cov manufacturer part no.2790 , i st stage intermidiate shaft bearing co manufacturer part no.2990 , 1st stage intermediate shaft bushing manufacturer part no.3090 , 1st intermediateshaft spacing washer manufacturer part no.3490 , 2nd stage pinion shaft and gear in set manufacturer part no.353690 , 2 nd stage intermediate shaft spacing wa manufacturer part no.4590 , 3 rd stage bearing cover spacer ring manufacturer part no.3790 , out putshaft bearing cover manufacturer part no.4990 , out put shaft bearing cap manufacturer part no.5190 , output shaft oil seal manufacturer part no.5490 , equalizing gear in set of 2 number manufacturer part no.g067590 , loop take up trolley for 800mm belt width manufacturer part no.g1708 , wheel for take up carriage manufacturer part no.g17a , tendum drive drum 650 mm dia manufacturer part no.g0710d , foot mounted helical gear box manufacturer part no.901 , input shaft hold back cover manufacturer part no.6255 , hold back end cap manufacturer part no.6855 , input shaft bearing cap manufacturer part no.2055 , input bearing cover spacing washer manufacturer part no.2355 , input shaft oil seal manufacturer part no.2255 , input shaft oil seal hold back side manufacturer part no.7155 , input shaft with integrated pinion and f manufacturer part no.612655 , 2 nd stage pinion shaft and gear in set manufacturer part no.353655 , output shaft bearing cover manufacturer part no.4955 , output shaft bushing manufacturer part no.5355 , output shaft oil seal manufacturer part no.5455 , output shaft manufacturer part no.5555 , foot mounted helical gear box with 3 sta manufacturer part no.55155 , equalizing gear in set manufacturer part no.g0655 , tandem driven drum 650mm dia manufacturer part no.g0708 , 3rd trage pinion and gear inset manufacturer part no.464755 , input shaft bushing manufacturer part no.2155

CTN :45045605

05 Jun, 2026 NA

Sundergarh - Odisha

Tender For corrigendum : supply of iec dusterloh ipm400 5.55 1 drive rotor,iec dusterloh ipm400 5.55 1 sealing ring,aph air motor iec dusterloh ipm400 5.55,aph air motor iec dusterloh ipm400 5.55,aph air motor iec dusterloh ipm400 5.55,iec dusterloh ipm400 5.55 1 bearing hsg,iec dusterloh ipm400 5.55 1 bearing hsg,iec dusterloh ipm400 5.55 1 dis piece,iec dusterloh ipm400 5.55 1 dis piece,aph air motor iec dusterloh ipm400 5.55,iec dusterloh ipm400 5.55 1 output shaft,aph air motor iec dusterloh ipm400 5.55,aph air motor iec dusterloh ipm400 5.55,iec dusterloh ipm400 5.55 1 silencer,aph air motor iec dusterloh ipm400 5.55,iec dusterloh ipm400 5.55 1 silencer,aph air motor iec dusterloh ipm400 5.55,iec dusterloh ipm400 5.55 1 st st gear,aph air motor iec dusterloh ipm400 5.55,iec dusterloh ipm400 5.55 1 indicator,aph air motor iec dusterloh ipm400 5.55,aph air motor iec dusterloh ipm400 5.55,aph air motor iec dusterloh ipm400 5.55,aph air motor iec dusterloh ipm400 5.55,iec dusterloh ipm400 5.55 1rotor

Central Government And Public Sector

CTN :45255394

09 Jun, 2026 NA

Bangalore - Karnataka

Tender For helical worm gearmotor for long conveyor b shop and stn-4 main outgoing chip conveyors machine chip conveyor to model no-sk 42125-100lp/4 tf of m/s nodes and loads or equivalent 1) acceptable make of gear box-nodes and loads,power build,new allen berry,shanthi gears, sew.2) acceptable make of motor-abb,bharath bijlee,nodes and loads,siemens,crompton greaves,sew ,technical specification: 1) power -2.2 kw, 2) input speed-1460 rpm ,3) output speed-19 rpm ,4) ratio-76.95 ,5) output torque- 894 nm, 6) voltage-230/400 v, 7) frequency-50hz ,8) efficiency class-ie3 ,9) enclosure-ip55, 10)type of housing-foot mount, 11) mounting position-m4(should be capable for horizontal and vertical mounting without any modification) ,12) output shaft-solid keyed shaft,13) output shaft diameter-60 x 120mm. 14) motor cooling -tefc 15) service factor-2.5. 16) the motor used shall be without any modification either on shaft/ flange.17) mounting hole to hole -180mm x 200 mm.18) mounting hole dia-22mm.19) warranty: 18 months from the date of supply or 12 months from the date of commissioning. 20) motor inverter speed range standard line powered - inverter capable(motor should be designed to work with vfd in the range 25hz to 65hz. 21) base weight-125 kg maximum. 22) the overall length shall not exceed 700 mm. 23)gear motor should be unicase(housing (casing) is made as a single, integral unit) type. special conditions 1)the offerer shall furnish technical specification catalogue/data sheet duly indicating dimensional details, torque value and motor details during tender participation and along with material supply.2) only authorized dealers or manufactures of above mentioned makes shall participate in tender.3) drawing of modelno- sk 42125-100lp/4 tf is attached for reference only. [ warranty period: 18 months after the date of delivery ] ]

Central Government And Public Sector

CTN :45267072

12 Jun, 2026 NA

Bangalore - Karnataka

Tender For helical inline gear motor to the model no. sk973.1-112mp/4 tf of make m/s nord or substantially equivalent with following features: input speed(rpm): 1440; output speed(rpm): 15; gear ratio: 94.96; power (kw): 4; service factor: 1.3; output torque: 2519 nm; overhung load: 23.6 kn; axial load: 22 kn; motor inverter speed range: standard line powered inverter capable; voltage: 400/690 v; frequency: 50 hz; efficiency class: ie3; current 1: 7.85 a; current 2: 4.53 a; cosinus: 0.83; motor duty: s1 - continuous; enclosure: ip55; insulation class: f; mounting pos - m1; housing material: cast iron housing; type of housing: foot mount; output shaft: solid keyed shaft; output shaft (dia x length): 60x120 mm; output shaft material: standard; gearbox breather options: auto vent; gearbox sealing options: fkm seals; bearing design: standard bearings; motor cooling: tefc - totally enclosed fan cooled; motor thermal protection: thermistor; motor option: fluoro rubber motor seals. note: - i. material of construction: fabricated steel housing (stress relieved) ii. all gears shall be manufactured from steel forgings or rolled bar made from steel 17cr ni mo6/18cr ni mo6 (case hardening steel). iii. all gears shall be case hardened to 58-62 hrc and profile ground. iv. output shaft shall be of en 9 material normalized to 201 bhn (min) v. bearing used shall be rollingelement type of make skf/ntn/timken/fag only. special conditions: a) only authorised license manufacturers of gear boxes or their authorised dealers shall participate in the tender and must furnish an authorizedlicense or dealer certificate at the time of technical scrutiny. b) mtc and heat treatment shall be submitted along with the supply. c)warranty: the material shall have a warranty of 12 months from the date of installation or 18 months from the date of supply, whichever is earlier d)above specified materials are the minimum required standard to be considered while desiging the gear motor. [ warranty period: 18 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45250618

29 May, 2026 NA

Tiruvallur - Tamil Nadu

Tender For supply of m5590221452: 2000tph: output shaft for spld 1700 gb , m5590221453: 2000tph: output shaft seal for spld 1700 , m5590221454: 2000tph: output shaft end seal for spld 1

Central Government And Public Sector

CTN :45250480

10 Jun, 2026 NA

Chittorgarh - Rajasthan

Tender For supply of electrical actuator for control valves cv-3&4 with a-type output shaft drive

Central Government/Public Sector

CTN :45259677

08 Jun, 2026 NA

Morbi - Gujarat

Tender For instruments/other items (part-2 of 6) - middle ear surgery set with acceossries us fda approved fisch perforator, diameter 0.5 mm, length 16 cm, 1 no., 354, middle ear surgery set with acceossries us fda approved fisch caliper, angled shaft, diameter 0.6 mm, marker pin at 10 mm, len gth 16 cm, 1 no., 358, middle ear surgery set with acceossries us fda approved pick, 45, size 2.5 mm, length 16 cm, 1 no., 362, universal bronchoscope, size 7.5, outer diameter 10.2 mm, inner diamet er 9.5 mm, lengith 43 cm, adult broncjoscope set and acessories with us fda and ce approved, 1 no., 366, full lumen operating bronchoscope, size 12 mm, length 43 cm, with 32 f r. working channel for application of bronchial bougies,adult broncjoscope set and accessories with us fda and ce approved, 1 no., 370, sealing cap, with rubber seal, for use with bronchoscopes and tracheoscopes adult broncjoscope set and accessories with us fda and ce approved, 1 no., 374, lnstrument guide, for suction catheter adu lt broncjoscope set and accessories with us fda and ce approved, 1 no., 378, forward oblique telescope 30" enlarged view, diameter 4 mm, i ength 30 cm, autoclavable, fihr optie light adult broncjoscope set and accessories wtth us fda and ce approved, 1 no., 382, full lumen operating tracheo scope, modified to application of polyfl ex stents, inner diameter 13 mm, distal end with 45 oblique beak, for use with prismatic light deflector 101o1 f, size 14 mm, length 33 cm c lor code: blue us fda approved, 1 no., 386, rigid suction tube, outer diameter 4 mm, working length 55 cm us fda approved, 1 no., 390, foreign body basket, with ring handle, working length 50 cm us fda approved, 1 no., 394, highperformance led cold light fountain with one light outlet, power supply 100 240 vac, 50/60 hz us fda and ce approved 150 led, 1 no., 398, handheld portable video otoscope, use : ent examination, suitable for clinics, hospitals,display3inch lcd, resolution640*480(rgb),power2w, weight280g,illuminancenatural white(6 leds),resolution 1280*720px,image/video function:yes, outputusb output easy to storage and establish image/video,memory type: micro sd card 8gb | battery type: rechargeable lithium battery | capacity: 1350mah | cycle life of battery: >300 times | battery working time: >240min | charging time: 2 hrs accessory scopes: product: otoscope | total length of scope: 140mm | working length: 90mm | max od: 4.2mm | direction of view: 0, 1 no.

Central Government And Public Sector

CTN :45227653

22 Jun, 2026 NA

Bangalore - Karnataka

Tender For foot mounted 1hp rt.angled helical geared motor. the motor used shall be flange mounted of 1hp class "f" insulated. gear box output rpm 13 +/- 2%. torque value should not be less than 35kgm. similar to power build motor geared motor cat.no. hfs40-d80l4.the motor shall be without any modification to frame or shaft. the offerrer shall furnish catalogue/ data sheet duly indicating the dimensional details, torque value and motor details along with the offer. only authorised dealers/manufacturers to quote. makes sew,power build,new allenberry, shanthi. warranty: 12 months from the date of installation or 18months from the date of supply. [ warranty period: 18 months after the date ofdelivery ] ]

CTN :45252502

30 May, 2026 2.24 Lacs

Sundergarh - Odisha

Tender For tender for supply of coal feeder spares -drag lnk chain fdr worm wheel assembly , drag lnk chain fdr hub for coc gearbox , drag lnk chain fdr input shaft for coc g , drag lnk chain fdr coupling half for co , drag lnk chain fdr worm wheel rim for co , drag lnk chain fdr hub for coc gearbox , drag lnk chain fdr intermediate shaft fo , drag lnk chain fdr output shaft for coc , drag lnk chain fdr coc drive shaft beari , drag lnk chain fdr coc driven shaft , drag lnk chain fdr coc driven shaft slee , drag link chain feeder belt supporting b , drag link chain feeder coupling bush , drag link chain feeder output shaft asse , drag link chain feeder helical gear for , drag link chain feeder pinion for dyno g , drag link chain feeder worm shaft for dy , drag link chain feeder tensioning device , drag link chain feeder tensioning device , drag link chain feeder belt take up pull

Radiator Fan Shaft Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors