Latest radiator fan spares Tenders | Government radiator fan spares Tenders

Central Government / Public Sector

CTN :40500974

24 Jun, 2025 NA

Hyderabad - Telangana

Tender For supply of controller (pcb) suitable for brushless sensor less dc railway carriage fan (fan specification:rdso spec no. rdso/pe/spec/tl/0021/2005 (rev.3) [ warranty period: 30 months after the date of delivery ]

State Government

CTN :40459466

02 Jun, 2025 4.47 Lacs

Mandi - Himachal Pradesh

Tender For providing and fixing electrical equipments accessories mechanical spare parts and electrical installation to pump house at paddal and tarna - providing and fixing new ball bearing 7312 skf make (begap) complete in all respect as per the direction and to the entire satisfaction of the engineer-in-charge in all leads and lifts., providing and fixing new ball bearing nu 412 skf make complete in all respect as per the direction and to the entire satisfaction of the engineer-in-charge in all leads and lifts., providing and fixing new ball bearing 6314 skf make complete in all respect as per the direction and to the entire satisfaction of the engineer-in-charge in all leads and lifts., providing and supplying gland dori 16 mm in all leads and lifts., providing and supplying gland dori 14 mm in all leads and lifts., providing and supplying gland dori 10 mm in all leads and lifts., repair / overhauling of 5.00 hp monoblock pump set including cost of change of ball bearing no. 6307 & 6308 in 2 nos. pump sets and dismentling, assembling, testing and carriage of pump at site of work including labour charges complete in all respect as per the satisfaction of engineer-in-charge in all leads and lifts., repair / overhauling of 200.00 hp centrifugal pump set including cost of change of sleeves, cleaning and regreasing of all bearing and dismentling, assembling, testing and carriage of pump at site of work including labour charges complete in all respect as per the satisfaction of engineer-in-charge in all leads and lifts., providing and supplying rechargeable led torch 3 watt (wipro) make complete in all respects and to the entire satisfaction of the engineer-in-charge., providing and fixing three core submersible flat cable 10.00 sq. mm for submersible pump set of plaza / finolec make in all leads and lifts., wiring for light point/ fan point / exhaust fan /call bell point with 1.5 sq. mm. pvc insulated heat resistant flame retardant (hrfr) and low smoke single core (flexible) copper conductor cable in surface/recessed pvc conduit and earthing the light point with 1.5 sq.mm. hrfrls/pvc insulated single core copper conductor cable as required., supplying and fixing metal box of 180mmx100mmx60mm deep (nominal size) on surface/recess with suitable size phenolic laminated sheet cover in the front including providing and fixing 5 pin 5/6 amps socket outlet and 5/6 amps, piano type switch, connections, painting etc. as required., supplying and fixing metal box of 180mmx100mmx60mm deep (nominal size) on surface/recess with suitable size phenolic laminated sheet cover in the front including providing and fixing 6 pin 15/16 amps socket outlet and 15/16 amps, piano type switch, connections, painting etc. as required., wiring for circuit/sub-main with following size pvc insulated heat resistant flame retardant (hrfr) and low smoke single core (flexible) copper conductor cable in surface/recessed pvc conduit along with 1 no. hrfrls/pvc insulated single core copper conductor cable of same size for earthing as required.2x1.5 sq. mm., 2x10.0 sq. mm., supplying and erection of 6 amps. to 32 amps. rating, 10 ka breaking capacity, 240 volts, c curves, miniature circuit breaker of following poles in the existing mcb db complete with connections etc. as required:- single pole. cat-a., supplying and erection of 40/50/63 amps rating. 10 ka breaking capacity, 240 volts, c curves, miniature circuit breaker of following poles in the existing mcb db complete with connections etc. as required:- double pole. cat-a., supplying and fixing of following way, single pole and neutral sheet steel mcb distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wire-set, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required:-single door-6 way, supplying and fixing bakelite batten/angle holder including connect

Central Government/Public Sector

CTN :40473629

16 Jun, 2025 NA

Jodhpur - Rajasthan

Tender For supply of fan connector two way of tough non-ignitable moulding material or rigid p.v.c.for railway carriage fan as per is:6896-1973. [ warranty period: 30 months after the da te of delivery ]

Central Government/Public Sector

CTN :40473684

16 Jun, 2025 NA

Ajmer - Rajasthan

Tender For supply of 110 volts brushless dc (bldc) railway carriage fan fixed type 400 mm sweep co nfirming to rdso spec. no. rdso/pe/spec/tl/0021/2005 (rev.3). with amendment no 1 or latest . [ warranty period: 30 months after the date of delivery ]

CTN :40289846

30 May, 2025 NA

North 24 Paragana - West Bengal

Tender For purchase of spares - nut (a1-1-15) , nut m18 plain(jcb super plate xxx i ac) , bolt m18x90(jcb super xxx i ac) , joint water outlet (44tc plate-w) , radiator bottom hose(jcb super xxvii b-17) , de spanner 27x32(jcb super, plate- v11 d) , strut gas door(plate-iv j-1) , tail lamp left side(item no-906) , door seal right hand (jcb super page 95) , fuel pipe fuel filter to fuel pump(ms-174) , fuel pipe feed pump to fuel filter(ms-175) , arm wiper blade assy(item no- 957) , handle door right handle(plate-iv o-9) , hose assy suction(item no - 1202) , light hand lamp 12v , element fuel sediment filter(u v-2162) , bulk head hose(plate-xiii j-2) , secondary element(ispl sl-1904) , gasket for cyl head thickness 1.25(ms-156) , motor wiper linkage assy(plate-1x g-1) , injector assy(vs turbocharged engine)(ms -171) , hose 3 by 4 inch bsp usp 2150mm(plate-xxxi aa-15) , set piston ring 0.50 o s , header for cooler and filter( ms-177) , silencer exhaust box 240x150mm(p-627) , tool pyramide (plate- xxxi aa-21) , tools kit (set of 41items) , bonded washer seal, 1 by 2 inch bsp , bolt plough 3 by 4 inch unf x 23 by 4 inch bs311 type-9(sl-60) , cab base mounting , repair kit , oil seal(ms-183) , pin pivot( ms sl no-4) , hose 1 by 4 inch x 1 by 4 inch bspx520 long , bearing linner( ms-20) , filter engine oil , element suction(jcb 3dx plate b1-2-1 sl no 4) , wiper arm(ms-80) , lock handle with key(ms sl-51) , seal kit (ispl sl no 1513) , filter element , gaiter gear lever , light rear combination lh tail lamp lh (c1-3-11) , element fuel filter 30micron(sl no-xxx c-8) , leaver tipping (plate-vi t-1) , brake piston , seal rear( ms sl no-131e) , bush , plate pressure clutch 6.0mm (ms sl no-212) , seal , kit spider 106.4x43.9 dia(plate-f3-1-1) , rod seal , seal(ms sl-33) , brush carrier assy(ms-192) , v-belt (b-57) , throttle lever & control assy(jcb ispl sl no 806) , seal kit(ms-126) , lead bty positive ( ms sl no- 65) , seal shaft(ms sl no-131g) , brake shoe(ms-187) , thermosted abi(item no-2491) , bearing (h1-1-1 by 13) , filter assy , pressure hose(escou) , fuel maint filter 5 micron jcb 3dx super) , injector(item no-2526) , plate brake counter(ms sl no-144a) , tool kit standard(jcb super) item32 nos qty34 nos , unloader valve with inflator (ispl-97) , kit spider(jcb f1-6-10) , filter fuel assy.(item no-2132) , grease bucket pump , propshaft (p92)(price list-51883) , valve solenoid assembly(ctlg 3dx f5-1-1) , king post carriage(item no-647) , boom assy (jcb 3dx u v) plate b4-4-1 , drive head (item no-1536) , axle steer drive(item no-1521) , decal panel , dowel , spring(ms sl-64) , bolt banjo , rubber hose(plate-l1-4-10) , brush spring(ms-191) , seal,filter cap ( plate no- b1-3-2, sl no- 6a) , horn 12v (plate-c1-12-2) , bty cover (ms-67, jcb u v) , sealing ring ce(ms-190) , relay f r (ms sl-140) , cleaner active wiper(iv r-12,383) , adhesive(iv,r-10) , rh handle , jug oil 200cc , fan belt xpa1280(ispl 4r1040t sl-1 p-79) , oil seal hsg (plate-2h096) , feed pump (side opening)(ms -170) , cable assy throttle controll(ms-96(a)) , water pump assy , pump oil (f5-1-1 e jcb) , roof moulding(plate-iv e-1) , set piston ring 0.75 o s , fuel injection pump vs mico(ms-169) , alternator 12v 65amp(ms-197) , pump hydraulic(jcb super) , radiator aluminium (plate-xxxiii) , backhoe bucket 21 inch wide (ispl plate-k04) , clutch assy , rear axle assy 30 kph , seal kit(ms sl-62) , ignition switch (ispl escou sl no 637) , pressure plate(ms sl-429) , hose suction main hydraulic pump(e2-1-1) , hose , hose 1 by 2 inch x 1 by 2 inch bspx660mm long str , hose(plate-e1-2-1 by 13) , thermostat element(ms-164) , solenoid switch(ms-181) , pivot pin alloy steel(ms sl-18) , fuel filter , lead bty negative (jcb 3dx (u v) ms ser no 66) , rocker arm adjusting screw(ms sl-539) , link track rod (plate-f1-3010) , engine fan-21(jcb super) , alternator(item no-75) , grease bucket pump , kit seal main hyd pump(plate-e2-2-1) , drive assy(4r1040t starter page 70) , armature assy(ms-196) ,

Central Government / Public Sector

CTN :40419202

30 May, 2025 NA

Rajahmundry - Andhra Pradesh

Tender For supply of printed circuit board (pcb) for 110v ac/dc, 450 mm sweep universal brushless railway carriage fan confo rming to rdso specification no. rdso/pe/spec/tl/0021/2005 (rev-3) with amendment no. 1. the pcb shall conform to clause 4.4 to 4.4.8 of the rdso specification. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40419795

27 Jun, 2025 NA

Bhopal - Madhya Pradesh

Tender For supply of fixed type 110 v, ac railway carriage fan, 300 mm sweep as per is-6680-1992 with an nexure 'h' revised in dec.2005 with anti injury type fan gaurd (ribs inside the guard) to drg.no.crws- bpl-el-sk-2006-6 or latest with smoke grey colour code 692 of is-5- 1978. [ warranty period: 30 mo nths after the date of delivery ]

CTN :40409392

11 Jun, 2025 NA

Sealdah - West Bengal

Tender For supply of control printed circuit board(pcb) for 110 v bldc carriage fan 400 mm sweep as per rdso specification no : rdso/pe/spec/tl/0021/2005 (rev-3) with amendment no. 1 and drawing no: rdso/pe/s k/tl/0153-2011 (rev-1). [ warranty period: 30 months after the date of delivery ]

CTN :40409636

05 Jun, 2025 NA

Ranchi - Jharkhand

Tender For supply of electronic controller card (pcb) for 110 v bldc railway carriage fan as per rdso spec no-rd so/pc/spec/tl/0021/2005 rev-3 ,sensor less with interchange ability features. [ warranty period: 30 mon ths after the date of delivery ]

Central Government/Public Sector

CTN :40392147

27 May, 2025 NA

Hubli - Karnataka

Tender For supply of rubber packing ring to drg. no. icf-sk. 7-3-058 alt-'d' for carriage fan. [ warranty peri od: 30 months after the date of delivery ]

Radiator Fan Spares Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government / Public Sector

State Government

Central Government/Public Sector

Central Government/Public Sector

Central Government / Public Sector

Central Government/Public Sector

Central Government/Public Sector