Latest radius gauge Tenders | Government radius gauge Tenders

CTN :45733165

07 Jul, 2026 NA

Multi City - West Bengal

Tender For auction sale of depot non ferrous scrap - lot no.p.nfa-1.bin no- 2/a ,7/a & ground floor at near bin -37.exmp.06.2026-27.03 description- scrap aluminium with iron attachment, and other aluminium casting, field coil, lamp caps, aluminium boring etc. our offer: a) scrap aluminium with or without iron attachment. such as- scrap aluminium cylinder for tap changer, aluminium number plate, aluminium feeder wire, steady arm, anti wind clamp, wiper motor, bus bar connector (aluminium), part of filter element of emu motor coaches, compressor & air dryer spares, horn, gauge cover, piston sub assembly, and other aluminium misc.as in the lot which are kept in bin no-2/a & ground floor of near bin 37. qty= 1929 kgs. b) scrap aluminium rear & front cover with or without rubber and grease attachment. in bin no- 7/a . qty- 2462 kgs. loading will be done by purchaser's own arrangment.

Central Government/Public Sector

CTN :45702805

01 Jul, 2026 NA

Multi City - Madhya Pradesh

Tender For auction sale of rolling stock - scrap old iron and steel of cond. coach with or without minor wood, decorum and non-ferrous attachment. (loose wood, decodum, non-ferrous & restricted items will not be delivered) coach no wc-07001fac/icf note : - 1 advance handing over of coaches for cutting may be allowed. 2. before commencing of delivery of lot, all the restricted items shall be handed over to sse/yard and cutting shall be completed before commencing of delivery.(qty. 16 mt approx.) s.b.lot no. bpl/crws/26-27/cond. coach/15/0068 restricted items: bogie items: complete trolley including following items:- wheel set with axle box & roller bearing, axle box spring & bolster spring, brake gear fittings, bronze wearing pieces, bolsters, suspension link, wearing plate, l.s. beam, equalizing stay with pin, draw bar hook, draft link with nut, draft key, screw couplings, buffer casing, buffer plunger with spindle in assembly, draw gear assembly, center pivot pin, etc. furnishing and carpentry items: window shutters, aluminum window frames with glass, sealed window glass, seats and berths of ac & non ac coaches, unified ss inlay, bio tank, ss trough floor, wash basin, aluminum water tank (over head, under slung etc), water taps ( metallic),wall protector etc. air brake items: distributor valves, control reservoir with common pipe brackets, air brake cylinder, dirt collector, check valve with chokes, angle cocks, isolating cocks, auxiliary reservoirs, pressure gauge, pev, peasd, guard emergency valve etc. electrical items: alternator, rru/erru, fan, battery cell, battery box, tube lighting fitting, night lamps, emergency lights, compressor, , condenser, evaporator unit, pre cooling transformer, transformer condenser/ blower motor, seat indication lights, wash basin lights, cable, laptop/mobile charging points, ac control panels, rmpu units, inverter etc.

Central Government/Public Sector

CTN :45702806

01 Jul, 2026 NA

Multi City - Madhya Pradesh

Tender For auction sale of rolling stock - scrap old iron and steel of cond. coach with or without minor wood, decorum and non-ferrous attachment. (loose wood, decoram, non-ferrous & restricted items will not be delivered) coach no 1-wc-910037 art/beml2-wc -920016 art/beml 3-wc-910036 art/rcf note : - advance handing over of coaches for cutting may be allowed. 2. before commencing of delivery of lot, all the restricted items shall be handed over to sse/yard and cutting shall be completed before commencing of delivery.(qty. 48 mt approx.) s.b.lot no. bpl/crws/26-27/ cond. coach/15/0069 restricted items: bogie items: complete trolley including following items:- wheel set with axle box & roller bearing, axle box spring & bolster spring, brake gear fittings, bronze wearing pieces, bolsters, suspension link, wearing plate, l.s. beam, equalizing stay with pin, draw bar hook, draft link with nut, draft key, screw couplings, buffer casing, buffer plunger with spindle in assembly, draw gear assembly, center pivot pin, etc. furnishing and carpentry items: window shutters, aluminum window frames with glass, sealed window glass, seats and berths of ac & non ac coaches, unified ss inlay, bio tank, ss trough floor, wash basin, aluminum water tank (over head, under slung etc), water taps ( metallic),wall protector etc. air brake items: distributor valves, control reservoir with common pipe brackets, air brake cylinder, dirt collector, check valve with chokes, angle cocks, isolating cocks, auxiliary reservoirs, pressure gauge, pev, peasd, guard emergency valve etc. electrical items: alternator, rru/erru, fan, battery cell, battery box, tube lighting fitting, night lamps, emergency lights, compressor, , condenser, evaporator unit, pre cooling transformer, transformer condenser/ blower motor, seat indication lights, wash basin lights, cable, laptop/mobile charging points, ac control panels, rmpu units, inverter etc. note: delivery will be made on actual nos basis.

CTN :45689893

25 Jul, 2026 NA

Parganas - West Bengal

Tender For supply of 45 types of gauges for extractor - chamfer gauge for extractor , chamfer gauge for extractor , chamfer gauge for extractor , chamfer gauge for extractor , chamfer gauge for extractor , gap limit gauge , gap limit gauge , gap limit gauge for extractor , gap limit gauge for extractor , gap limit gauge for extractor , gap limit gauge for extractor , gap limit gauge for extractor , gap limit gauge for extractor , gap limit gauge , hole depth gauge for extractor , plug gauge for extractor , plug gauge for extractor , plug gauge , plug gauge for extractor , plug gauge , plug gauge for extractor , plug gauge for extractor , position gauge , position gauge for extractor , position gauge for extractor , position gauge for extractor , profile gauge for extractor , radius gauge for extractor , receiver gauge for extractor , receiver gauge for extractor , receiver gauge for extractor , receiver gauge for extractor , receiver gauge for extractor , receiver gauge for extractor , slip gauge for extractor , slot depth gauge for extractor , slot depth gauge for extractor , support for extractor , chamfer gauge for extractor , position gauge for extractor , position gauge for extractor , receiver gauge for extractor , receiver gauge for extractor , receiver gauge for extractor , receiver gauge for extractor

CTN :45666674

04 Jul, 2026 NA

Bangalore - Karnataka

Tender For digital spirit level 30 cm: digital spirit level 30 cm. similar to make and model: insize , digital universal protractor 300mm: digital universal protractor, blade length 300 mm , weld profile gauge (cam type) : weld profile gauge (cam type) , angle gauge 1 to 45 degree, gauge mtl: hardened stainless steel , weld fillet profile gauge (leaf type) , gauge mtl: stainless steel, to be proper packed , feeler gauge to range: 0.02-1mm (consisting of 17 leaves , feeler gauge range: 0.05-1mm, 20 leaves, similar to make: mitutoyo part no. 184-304s or equivalent. , radius gauge 0.5-13mm: radius gauge range 0.5 to 13 mm, 26 leaves, similar to make: mitutoyo , radius gauge range 15.5 to 20 mm, 30 pair of leaves, similar to make: mitutoyo part no. 186- 107 or equ

CTN :45675374

09 Jul, 2026 NA

Multi City - Bihar

Tender For auction sale of others - 1 control terminal block 16 mm 03 nos. 2 hp/lp cut out 05 nos. 3 scrap scroll compressor 10 nos. 4 scrap blower motor, 1.5 hp, 1400 rpm with top 18 nos. 5 scrap condenser fan motor, 1 hp, 1400 rpm with top 18 nos. 6 ss welded round guard 03 nos. 7 dryer filter (1.5¿ solder type) 29 nos. 8 hartige ( coupler) connector 24 pin 46 nos. 9 hartige ( coupler) connector 16 pin 20 nos. 10 dumper actuator 5 nos. 11 male female plug and socket for dumper actuator 5 nos. 12 pressure transmitter ( 0-10 bar) 20 nos. 13 pressure transmitter ( 0-40 bar) 26 nos. 14 glass bulb cartridge 130 degree 59 nos. 15 scrap esti switch assembly with cartridge 9 nos. 16 air heater set consisting 400 watt ( 15 nos.) coil with insulated backelite sheet 3 nos. 17 scrap low pressure control switch (auto reset) 38 nos. 18 scrap high pressure control switch (auto reset) 50 nos. 19 scrap control pressure switch (auto reset) 24 nos. 20 expansion valve 22 nos. 21 hp gauge (0-40 bar) 13 no. 22 lp gauge (0-10 bar) 13 no. 23 set point generator switch 5 nos. 24 top cover (part-i inside) 4 nos. 25 hygrostat 35-100% 8 nos. 26 scrap compressor contactor -type ls-1 bk 00 dc 110 volt 44 nos. 27 scrap condenser motor contactor -type 1.54k10e dc 110 volt 37 nos. 28 scrap blower motor contactor -type 1.54k10b dc 110 volt 27 nos. 29 dc-dc converter for flapper motor, 110 v/24 v , 1.5 amp 3 nos. 30 bottom cover (part-i inside) 4 nos. 31 electronic controller (srmc-20) 5 nos. 32 top cover (part-ii inside) 4 nos. 33 multifunctional monitoring relay, 750 volt 33 nos. 34 scrap dc-dc converter , 110 v/24 v, 20 amp/1.5 amp 20 nos. 35 return filter, fresh air cassette filter 73 nos. 36 scrap bush bearing clutch plate, commutator, carbon brush holder including carbon 4 nos. 37 bottom cover (part-ii outside) 4 nos. 38 b-check kit for dg 14 set 39 solenoid switch of self-starter 2 nos. total ferrous - 958 kg total copper - 71 kg

Central Government/Public Sector

CTN :45632876

17 Jul, 2026 NA

Koraput - Odisha

Tender For supply of tools as per drawing provided by hal c c - set of measuring pins 1 set 21 pcs , sl no. 1 to 21 each 1 pc , radius gauge , receiver gauge , blade height gauge , measuring tool , measuring tool , ring master , measuring tool for dia 296g6 , adjustable master dia 420.57 , inspection tool for dia 293.2g6 , master , check template , check template , check template , width gauge , radius gauge , receiver gauge , receiver gauge , receiver gauge , receiver gauge , receiver gauge , receiver gauge , receiver gauge , check template , profile check template , profile check template , check template , check template , check template , check template , check template , check template , frequency checking set up , slip gauge 6.50/7.50mm , slip gauge 17.50/18.50mm , slip gauge 2.60/2.80mm , slip gauge 0.75/1.25mm , slip gauge 2.6/2.8mm , slip gauge 16.75/17.25mm , slip gauge 3.80/4.00mm , slip gauge 22.70/23.30mm , precision roller , precision roller , precision roller , precision roller , precision roller , precision roller , inspection probe , inspection probe , taper mandrel

Central Government / Public Sector

CTN :45591757

29 Jun, 2026 NA

Multi City - Telangana

Tender For auction sale of depot ferrous scrap - 12232ms26c,98050175, quantity- 60.085 mts. scrap condemned unserviceable ms-gi-ci rusted,corroded,dusted mixed scrap of c and w,loco,p. way,signal interlocking material consisting of all type of sheets,boxes,ms high gauge,pipes,footsteps,rings,strips,filters,trusses,patch cut parts,gutters,drum clocks,distribution boards,u rack,boring rod,ms panel body,ms battery charger covers,hand cuffs,driver seat,hand cart,push trolley,packing strips,ms body of block instrument,ms boiler coil cut pieces,42 u rack ms body,ms collapsible gate,ms termination box,ms bathroom ventilator,ms body of data logger,ms heater coil,screen guard,nuts,bolts,lavatory doors,ms carriage doors,pins,rivets,links,rods,angle cut pieces,structural frames,brackets,drums,cocks,basins,wire meshes,wire ropes,water tank cut up parts,casings,corrugated sheets,filter top and bottom caps,clamps,washer plates,stands,frames,sheet cuts,plate cuts,joists,channels,bases,plates,flats cut pieces,vestibule frames,window,door,shutters,head stocks cut up parts,broken t and p items,racks,compensating rings,bindings,washers,dust bins,chains,berth strips,gate frames,iron furniture,motor bodies,screw rods,levers,flats,rod cut pieces,trolley wheels,gi ducts,glow sign boards,ms electrical scrap,building rods,packing strips,ms body of rru,air cooler empty bodies,cbf filter,corrugated sheets,drums,blower motor frames,ucb packing frames,under frame cut up parts,berth frames,supports,cylinder blower covers,valves,end shield covers,traction motor yokes,shafts,piston rings,gears,brake shoe heads,brake gear items,straps,cotters,springs,equalizing stays,fan hub,end shield,pinions,ms covers,signal arms,lc gate pipes,ladders,angles,signal booms,rounds,signal buckets,pulleys,fabricated posts,signal lamp structures,liners,screws,spikes,air brake cylinders,brake hangers,bss hangers,battery boxes,battery containers,junction and location boxes,sleepers cut pieces,axle counter empty box,dc-dp ips empty rack ,sge block instrument empty box ,reset counter box,gps clock ,42 v rack,transformer bay,ms chain pulley blocks,beam scale parts,idly cooker with steam generator body,wheel barrow,fry pan single burner,ms floor stand,ms sliders,ms body wet grinder,fry pan,jara,ms ips rack rifle safety chain,ms air pump,foot spray,antenna,spiral binding machine,ms man drill,trbc covers,hand cart push trolley,expresser fan guard,ms first aid box,hacksaw frame,tool box,tie bars,ci brake blocks,composite brake blocks,ci pulleys,buckets,ms gear wheels,gym equipment,roti maker,bicycle parts,axle box,bfr cut up parts,grills,mesh,gate wheels,girders cut pieces,collars,trolleys,foot plates,signal point rods and any other ms-gi-ci material present in the lot with or without attachments of nf,ss,rubber,nylon and plastic. ms pan mortars,wire claws,wire baskets,crow bars,jim crow,dip lorry,weld filling body,sleeper hooks,rail dollies,rail cutting frames,augers,pick axe,tongue for rails,spades,beaters,ballast rake,powrahs,rail cum road mono trolley,case tin,h.s.lamps,rail dolly clips,shovels,trolley wheels and similar gang man items of sorts and sizes,with or without attachments.fiber,glass,windows,frp glass windows,window frames of sorts and sizes,broken or unbroken,with or without attachments of nf window shutters. [aluminium - 2 percent] note- 1. nf material,axles,wheel discs,and rails or material not mentioned in the description,if found during the delivery are to be returned to railways. 2. track and track fittings running through this area are excluded. 3. nf and stainless-steel attachments are approximately 0.1 percent of the lot quantity. 4. gas cutting permitted to facilitate loading. location- bin no- 232, right side of road no- 2. hsn code- 72044900. gst- 18 percent. note- delivery on actual weighment basis only special note: overload of the carrying capacity of the vehicle will not be permitted at the time of taking delivery, as per motor vehicle act 1988.

Central Government And Public Sector

CTN :45252556

19 Jun, 2026 NA

Kudankulam - Tamil Nadu

Tender For corrigendum : supply of interchangeable anvil - lc 0.01 mm - as per annexure c - range 700-800 mm , supply and delivery of analog outside micrometer with interchangeable anvil - lc 0.01 mm - as per annexure c - range 800-900 mm , supply and delivery of analog outside micrometer with interchangeable anvil - lc 0.01 mm - as per annexure c - range 900-1000 mm , supply and delivery of analog groove micrometer - with inside and outside measurement - as per annexure d - range 0-25 mm , supply and delivery of analog groove micrometer - with inside and outside measurement - as per annexure d - range 25-50 mm , supply and delivery of telescopic gauge set with 6 number of gauges - as per annexure e - range 8-150 mm , supply and delivery of micrometer stand - as per annexure f - adjustable - range upto 100 mm , supply and delivery of micrometer stand - as per annexure f - fixed - range upto 50 mm , supply and delivery of - analog long jaw caliper with fine adjustment as per annexure g - range 0-300 mm , supply and delivery of - analog long jaw caliper with fine adjustment as per annexure g - range 0-500 mm , supply and delivery of - analog long jaw caliper with fine adjustment as per annexure g - range 0-750 mm , supply and delivery of - analog long jaw caliper with fine adjustment as per annexure g - range 0-1000 mm , supply and delivery of - analog offset type caliper as per annexure h - range 0-200 mm , supply and delivery of - digital back jaw edge to centre type caliper as per annexure i - range 10.1 to 200 mm , supply and delivery of - digital back jaw edge to centre type caliper as per annexure i - range 10.1 to 300 mm , supply and delivery of - digital back jaw centre to centre type caliper as per annexure j - range 10.1 to 200 mm , supply and delivery of - digital back jaw centre to centre type caliper as per annexure j - range 10.1 to 300 mm , supply and delivery of analog pointed type caliper as per annexure k - range 0-150 mm , supply and delivery of analog knife type caliper as per annexure k - range 0-300 mm , supply and delivery of analog knide edge type caliper as per annexure k - range 10-200 mm , supply and delivery of analog swivel type caliper as per annexure k - range 0-200 mm , supply and delivery of magnetic dial stand suitable for holding stem sizes 6 mm and 8 mm as per annexure l , supply and delivery of magnetic dial stand suitable for holding stem sizes 4 mm, 8 mm and 3 per 8 inch as per annexure l , supply and delivery of magnetic dial stand with fine adjustment suitable for holding stem sizes 6 mm and 8 mm as per annexure l , supply and delivery of magnetic dial stand with fine adjustment suitable for holding stem sizes 4 mm, 8 mm and 3 per 8 inch as per annexure l , supply and delivery of magnetic dial stand - mini - as per annexure l , supply and delivery of magnet dial stand - universal - as per annexure l , supply and delivery of precision level as per annexure m , supply and delivery of precision level- box type as per annexure m , supply and delivery of radius gauges - 26 leaves 90 degree arc - 0.5-13 mm - as per annexure n , supply and delivery of radius gauges - 34 leaves 180 degree arc - 1-7 mm - as per annexure n , supply and delivery of radius gauges - 32 leaves 180 degree arc- 7.5 -15 mm - as per annexure n , supply and delivery of radius gauges - 30 leaves 180 degree arc-15.5 - 25 mm - as per annexure n , supply and delivery of metric screw pitch gauges - 21 leaves - 0.4 -7 mm - as per annexure o , supply and delivery of unified screw pitch gages - 30 leaves - 4-42 tpi - as per annexure o , supply and delivery of whitworth screw pitch gages - 28 leaves - 4- 60 tpi - as per annexure o , supply and delivery of digital vernier depth gauge - hook end - 10.1-210 mm - as per annexure p , supply and delivery of digital vernier depth //bid details 2 / 83 annexure p , supply and delivery of digital vernier depth gauge - mini - 0- 25 mm - as per annexure p , supply and delivery of dial depth gauge - 0-200

CTN :45458939

16 Jun, 2026 NA

Multi City - Uttar Pradesh

Tender For auction sale of depot non ferrous scrap - all kinds of mixed aluminium unserviceable scrap which comprising of wheel set earthing equipment, dome cover, return air filter, aluminium distributor valve, compressor wheel, piston casing, lp piston, aluminium fan blades, lable gauge, aluminium db body, aluminium head/block, crank case, gear case, piston released from dsl loco, different types of spare parts , open thin aluminiumwireetc. and other similar type known/unknown items also included in this aluminium scrapwith/without nf/ms attachement. [may be approx aluminium =85 % and iron/ss = 15% condition: - (1)the lot will be sold on an "as-is, where-is" basis. the provided lot weight is an estimate. (2) no claims regarding the material's quality, quantity, or condition will be entertained after the sale.3. purchaser are requested to visit the lot be fore bidding. location; - in godown no - 98/06 lbpl, dbaw, gst-18%, tcs -1% , hsn code-760200, allocation-20714208

Radius Gauge Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government / Public Sector

Central Government And Public Sector