Latest raft Tenders | Government raft Tenders

Central Government/Public Sector

CTN :40955232

08 Aug, 2025 NA

Noida - Uttar Pradesh

Tender For corrigendum : balance civil, structural and architectural works for entire power block area (t-yard to fgd up to chimney raft) at 1x800 mw ntpc sipat, chhattisgarh.

CTN :41153761

09 Aug, 2025 NA

Srinagar - Jammu And Kashmir

Tender For corrigendum : construction of pile type, open raft type tower foundations and supply, erection of tower material and supply, laying and stringing of 0.4acsr conductor with hardware fittings at various locations of 220 kv dc amtl

CTN :41219634

02 Aug, 2025 NA

Shahdol - Madhya Pradesh

Tender For supply of implants - supply of implants, d.h.s. plate long barrel & short barrel with round holes 125 , 130 , 135 , 140 angle; 3-6, holes ( cortical screw 4.5mm & dhs screw ), d.h.s. plate long barrel & short barrel with round holes 125 , 130 , 135 , 140 angle; 7-18 holes (cortical screw 4.5mm & dhs screw), d.h.s. plate long barrel & short barrel with d.c. holes 125 , 130 , 135 , 140 angle; 3-6 holes (cortical screw 4.5mm & dhs screw), d.h.s. plate long barrel & short barrel with d.c. holes 125 , 130 , 135 , 140 angle; 7-18 holes (cortical screw 4.5mm & dhs screw), d.h.s plate long barrel and short barrel with l.c. hole 125 , 130 , 135 , 140 ; 3-18 hole., note:- dhs instrumentation set with box ,, pediatric d.h.s.1250,1300, 1350,1400 angle;round hole plates 3-8, (cortical screw 4.5mm & dhs screw ), note:- pediatric d.h.s. instrumentation set with box, d.c.s plate (950) with round holes 4 -8, holes (cortical screw 4.5mm & dhs screw & cancellous screw ), d.c.s plate (950) with round holes 9-20, holes (cortical screw 4.5mm & dhs screw & cancellous screw ), d.c.s plate (950) with d c holes 4-8, holes (cortical screw 4.5mm & dhs screw & cancellous screw ), d.c.s plate (950) with d c holes 9-20, holes (cortical screw 4.5mm & dhs screw & cancellous screw ), d.c.s plate long barrel and short barrel with l.c. hole 125 , 130 , 135 , 140 ; 3-18 hole., note:- d.c.s. instrumentation set with box, trochanteric stabilisation plate and screw (125 , 130 , 135 , 140 ; 2-18 hole)with round hole, trochanteric stabilisation locking plate and screw and dc hole (125 , 130 , 135 , 140 ; 2-18 hole), contoured locking plate for fracture shaft femur (right & left) with screw 5mm(broad l.c.p), contoured locking plate for distal end femur (right & left) with screw 3-20 hole., medial & lateral proximal tibial buttress locking plate (t- & l- shape) with screw, hockey plate for tibia (right & left) with screw (4-17hole), hockey locking plate for tibia (right & left) with screw (4-17 hole), contoured medial/ antero-lateral locking plate for lower end tibia with screw (4-20 hole), clover leaf plate with screw (3-20hole), cobra head plate with screw (3-20 hole), hook plate with screw (3-20 hole), proximal humerus locking plate (philos plate) with screw (3-12 hole), contoured locking plate for distal end humerus. with screw (medial,lateral ,posterolateral for right and left side; 3-12 hole), calcaneal plate., calcaneal locking plates., clavicle locking plates.(pre contoured :5-12 hole for right and left), allis plate/ contoured plate for distal end radius with screw (2-12 hole) right and left ., locking elise plate/ contoured locking plate for distal end radius with screw 2-12 hole right and left side ., h-plate. with screw, y- plate. with screw, universal lower end tibia locking plate with screw (3-12 hole), d.c.p. narrow. with cortical screw (4-20 hole), d.c.p. broad. with cortical screw (4-20 hole), small d.c.p. plates with cortical screw (4-20 hole), small d.c.p. locking plates with cortical screw (4-20 hole), lcdcp 3.5mm (4-20 hole), lcdcp 4.5mm (4-20 hole), 1/3 rd tubular plates 3.5mm. with cortical screw (3-14 hole), reconstuction plates 3.5mm.with cortical screw(3-14 hole), reconstuction plates 4.5mm. with cortical screw(3-14 hole), reconstuction locking plates 3.5mm. with only locking screw (3-20 hole), reconstuction locking plates 4.5mm. with only locking screw (3-20 hole), pelvic spring plate, pelvic curved plate, pelvic streight plate, pelvic symphyeal plate, proximal tibia raft plates (4-20 hole), extra articular distal humerus plates (4-20 hole) for right and left, olecranon plates 3-12 hole., lateral distal fibula plates locking , precontoured 4-12 hole., fully threaded cannulatedcancellous screws 4mm. 25, 30 .115 mm, in 5 mm increment., 16 mm threaded cannulatedcancellous screws 4 mm., fully threaded cannulatedcancellous screws 6.5 mm 25, 30, .115 mm, in 5

CTN :41232216

18 Aug, 2025 NA

South Andaman - Andaman And Nicobar Islands

Tender For supply of life bouy plastic , life raft 20 men cap

Central Government/Public Sector

CTN :40881155

05 Aug, 2025 NA

Noida - Uttar Pradesh

Tender For corrigendum : civil, structural and architectural works of boiler, bottom ash hopper foundation, esp, esp cum fgd control building, mill and bunker, fan foundations, chimney raft, fgd

CTN :41010963

01 Aug, 2025 NA

Kolkata - West Bengal

Tender For corrigendum : supply of 12 nos. 10(ten) men life raft for 12 ton type fib (mha boat)

Central Government/Public Sector

CTN :41195052

04 Aug, 2025 NA

Ernakulam - Kerala

Tender For supply of life raft 20 men capacity

CTN :41177763

30 Jul, 2025 NA

Mumbai - Maharashtra

Tender For supplying items for the new integrated high court complex at bandra government colony, cts no. 629/1234/a, bandra (east), mumbai. - all concrete should be admixed with integral hydrophilic crystalline admixture (16bars) reputed makes like bulwark. taskmek, grace or equivalent for reducin permeability by more than 85% when tested as per din 1048 part 5 (after applying cycles of hydrostatic pressure), for self-healing of cracks up to a width of 0.40 mm, for reduced sulphate attack and for high early strength of concrete etc. this should meet the requirements specified in the recommended dosage rate of 1% complete as per manufacturers specifications to the entire satisfaction of engineer-in-charge. hydrophilic crystalline admixture shall also have a corrosion inhibitant property and shall be compatible with any other water reducing concrete chemical admixtures added to concrete for workability purpose. crystalline formation shall be mix of cylindrical & circular in shape to have maximum filling of pores the admixture used shall have manufacturers test reports and approval mandatorily both from iits and irc (indian road congress). approved makes: pidilite/ technonicol/ myk/ mapei, providing & applying 2 components, solvent free, liquid applied elastomeric seamless hybrid polyurea polyurethane membrane, using high pressure plural component spray equipment, to form a minimum system thickness of 1.5 mm in two or more passes with a total consumption of 1.5-1.6 kg / m2. the membrane shall have 100% solids, voc free, tensile strength > 15 mpa as per astm d 412, elongation > 450% as per astm d 412, low temperature crack bridging ability of 3.2mm as per astm c 1305, shore a hardness > 85 astm d 2240, puncture resistance > 1000 n as per astm e 154, water head resistance > 7 bar as per astm d 5385.the coating should pass dynamic crack bridging as per en 1062-7, method b for 20,000 cycles at -20 degree temperature. the membrane shall exhibit 25 years of service life tested and complied in accordance with en 13251:2016 durability certification. apply primer coat of epoxy primer by roller/ airless spray guideline and coverage @ 5-6 m2/ltr depends on porosity of concrete. allow to cure for max 5-6 hours. broadcast anti slip grains of 200-300 micron (dried sand) on wet primer at coverage of 0.8-1 kg/m2 and allow to come to touch dry condition before application of membrane. approved makes: pidilite/ technonicol/ myk/ mapei, supplying and installing 1.5 mm composite thick fully bonded weldable hdpe membrane conforming to is 16471:2017 requirements of ug waterproofing structures, requirements to provide type a fully bonded protection of ug waterproofing structures. the membrane shall exhibit 25 years of service life tested and complied in accordance with en 13251:2016 durability certification. the membrane should be minimum 2.4 m wide comprising of an hdpe layer and a pressure sensitive adhesive layer which is covered by a weatherproof protective layer with lap joint strength at overlaps >15000 n/m astm d 6392:2012. the membrane shall have minimum of 100 mm side and end laps which shall be thermos fused with leister machines at all the joints for assuring watertightness and achieving monolithic membrane. end laps and side laps should be a minimum of 100 mm with double weld system, comprising of two parallel welds of 15 mm wide each with a 20 mm air channel gap in between the two weld lines. the size of the membrane should not be less than 2.4 mtr. x 20 mtr. to minimize the joints. this membrane shall be continued over the vertical surface but terminated minimum 100mm below the top edge of the raft slab/footings and fixed as per recommendation. the hdpe membrane should have the below mentioned technical properties- 1) lap joint(side and end lap) strength at overlaps 15000 n/m astm d 1876 2) resist hydrostatic pressure of 70 m head of water as per astm d5385 3) puncture resistance of 1000 n as per astm e1544) peel adhesion to concrete of 150

Central Government/Public Sector

CTN :41163975

02 Aug, 2025 1.70 Lacs

Purba Medinipur - West Bengal

Tender For providing of repair and overhauling service - stowage of shore supply lift raft sling renewal of mushroom quarter master table renewal; stowage of shore supply lift raft sling renewal of mushroom quarter master table renewal; no; buyer premises

CTN :41084518

29 Jul, 2025 9.00 Lacs

Neemuch - Madhya Pradesh

Tender For singoli farshi supply-- 2025.26 singoli raft supply work, laptal 150 mm 1.00 m to 1.50 m a singoli raft 65 mm to 80 mm 1.00 m 2.50 m a 50 mm thick raft 0.60 to 1.00 m a 40 mm thick raft 0.60 to 1.00 m

Raft Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector