Web Analytics Made Easy - StatCounter

Rail Clip Tenders

Get complete information related to latest Rail Clip Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Rail Clip Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Rail Clip Tenders .

Filter
Loading....
Loading....
Loading....
Loading....
Loading....

Bid Submission Date Range
Tender Value

Central Government/Public Sector

CTN :40918260 Due date: 28 Jul, 202528 Jul, 2025 NA
Tender For supply of one coach set of kit items for asr fiat bogie frame. 1) anti roll bar support to drg. no. 66703018, col.i - 4 nos primer only to be coated as per clause 4 of specification no.mdts-166, rev.02. 2) disc to drg.no. aaa03168 - 8 nos supplier shall ensur e that component is protected against rust/corrosion during transit and storage with an easily removable rust/corrosion protectent. as per rcf specification md44121,dated 19-04-2011(para-1) 3) cylindrical part to drg. no.aaa03204 - 2 nos 4) screwing block to dr g.no.aaa03196- 8 nos 5) bracket to drg.no.aaa03191- 4 nos 6) boss complete to drg. no. 4 5503020, alt 'a', col.i - 6 nos 7) stiffener(m10) to drg. no. aaa03187 -2 nos 8) yaw damper br acket for fiat bogie frame with secondary air spring bogies to drg.no. 667-0-3-010, alt 'a' - 4 nos material specn.no. en10025-5,2004, s355j2w+n to be used in lieu of en10025/29, s355 j2g3 seamless tube to be procurecd from icf approved sources only. 9) vertical damper bracket lh for fiat bogie with air spring to drg. no.834-0-3-005, alt 'a' = 2 nos material sp ecn.no. en10025-5,2004, s355 j2w+n to be used in lieu of en10025/29, s355j2g3 wherever me ntioned in drawing. 10) vertical damper bracket rh for fiat bogie with air spring to drg. no. 834-0-3-006, alt 'a' = 2 nos material specn.no. en10025-5, 2004, s355 j2w+n to be used in lieu of en10025/29, s355j2g3 wherever mentioned in drawing. 11) bracket for installation lever (rh) to drg.no. 667-0-3-005 alt 'b'=2nos 12) bracket for installationlever (lh) to dr g. no. 667-0-3-006 alt 'b'=2nos 13) sleeve to drg.no.aaa03182 alt 'a'- 8 nos 14) bush to drg. no. aaa03183 -32 nos s.no.1 to 14 makes one coach set. the firm shall fulfil the manufact uring facility as per icf/md/spec-310, rev-00 amd-nil special condition :-items to be supplied i n coach sets. suitable packing to be done to avoid damage during transit, unloading an d rust prevention during storage. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40916940 Due date: 07 Jul, 202507 Jul, 2025 NA
Tender For supply of stiffener plate of front carrier plate of aar-h type cbc coupler as per rdso dr awing no.rdso/cg/drg/24034 (1 no. set of stiffener plate consists of -01 number of stiffner p late , 02 numbers hexagonal head bolt m16x45 (as per is:1364), 02 numbers hexagonal castle nut m16 (as per din 935 ) & 2 numbers split pin size 4 x 40 mm as per is: 549) [ warranty period: 8 4 months after the date of delivery ]

Central Government/Public Sector

CTN :40918374 Due date: 04 Aug, 202504 Aug, 2025 NA
Tender For manufacture & supply of 1 in 8.5 weldable cms crossing for bg 60e1 rail section and r260 grade on psc sleepers to rdso drg. no.t-6441 with alt.4 (or latest alt. if any) & conforming to irs specification for wcms crossings serial no. irs: t-29 (revised-2023) and irs t-12 2009 for flat bottom rails and str- tdg-0021 (version-2) or latest if any, including nylon cord reinforced grsp with confirming to irs specification t-55-2023 or latest if any an d supply of all components / fittings listed as per annexure-i and excluding standard fish plate, fish bolts & nuts, elastic rail clips, insulating liner, and chec k rails etc. ( the alt. in drawings & specification issued by rdso as on tender opening date shall be applicable in this tender ) [ warranty period: 30 mon ths after the date of delivery ]

Central Government/Public Sector

CTN :40905050 Due date: 28 Jul, 202528 Jul, 2025 NA
Tender For fabrication and supply of 6400 mm over-riding derailing switches 60 kg 1 in 8.5 on psc sleepers as per rdso drawing no. t-6068 with alteration 4 and conforming to irs specification no. t-1 0-2025, (complete set) with latest revision/corrigendum/amendment complete with all parts listed in t he sub assembly rdso drawing no. t-6068 including plate screws but excluding, grsp, standard fish plates, fish bolts, elastic rail clips, insulating liners/metal liners as amended up-to date of closing of e - tender. rails needed for fabrication purpose for tongue rails, stock rails and check rails will be arra nged by supplier at his own cost in terms of railway board's letter no. 2022/track-1(p)/fabricators dt. 24.01.2022. list of fittings : as per sub assembly rdso drawing no. t-6068 with alteration 4 available on rdso website (complete set) with latest revision/corrigendum/amendment complete with all parts l isted in the sub assembly rdso drawing no. t-6068 including plate screws but excluding, grsp, stand ard fish plates, fish bolts, elastic rail clips, insulating liners/metal liners as amended up-to date of clo sing of e- tender. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40917265 Due date: 09 Jul, 202509 Jul, 2025 NA
Tender For supply of item no: 1- paint anti corrosive bituminous black required for stiffener plate of cbc(specn. no .irs r6) to is:9862/81,with amendment no.1 of 1988 and reaffirrmmed1999 packed in new steel drums pla in (non returnable) 20 ltrs capacity to is:2552/79 grade b2 [ warranty period: 30 months after the date of delivery ]

State Government

CTN :40861455 Due date: 03 Jul, 202503 Jul, 2025 3.28 Crore
Tender For providing and supplying furniture to the various building at krantisinh nana patil government college for food technology, at peth, tal. -walwa, dist. sangli for mpkv rahuri - providing and supplying furnitures to the various buildings at krantisinh nana patil government college for food technology at peth, taluka walwa, dist sangli, for mahatma phule krushi vidyapeeth, rahuri ahilyanagagr, maharashtra, single bed @ 2025lx 1000dx 650h :- providing and fixing single bed of size 2025lx1000dx650 h with matress and pillow. under structure :-the legs are made of square tube of size 25x25 mm made out of ms with a thickness of 1.2mm. the legs should have corner brackets welded to it at two levels. the corner brackets are made of 2mm thick crca having a l shaped structure to join the side panels and head board to the leg . threenos .of horizontal stiffeners are provided at equal intervals. the stiffeners are made of square tube of size25x25mm made out of ms with a thickness of1.2mm. the middle horizontal stiffener has a leg at tached to it to transfer the load to the ground and add to the strength and stability of the complete structure. this legisal so made of square tube of size 25x25mm made out of ms with a thickness of1.2mm. all metal components to undergo 7 tank treatment process and should be powder coated to the thickness of minimum 50 microns dft. side panel:-the side panel sare made upof 18mm thick prelam particle board with both side decorative laminate. all exposed edges are sealed with 2mm thick pvc edge banding. the over all width of the side panel is 150mm. the side panels have 18mm thick prelam particle board baton running for required lengtht oadd rigidity to the structure headboard: -the head board is made up of 18mm thick prelam particle board with both side decorative laminate. all exposed edges are sealed with 2mm thick pvc edge banding. the head board size to be considered as 1000x650mm. footboard:-the foot board is made up of 18mm thick prelamparticle board with both side decorative laminate. all exposed edges are sealed with 2mm thick pvc edge banding. the head board size to be considered as 1000 x 450mm. bedbase:-the bed base is made up of 12mm thick prelam particle board with both side white laminate., study/ computer table 400d x 1030w x 725h :-providing and supplying computer table as per approved design the table shal be of size 400d x 1030w x 725h including in built key board pull out tray for keeping keyboard of computer the table shall be made from 20mm prelaminated partical board . all edges are covered by 2mm thick pvc edge bands glued by hot melt glue applyed by auto edge bending machine. modesty panal made from 18mm both side prelaminated partical board all edges covered by 0.8mm pvc edge band gluve by hot melt glue applied by auto edge bending machinne, study/visitor chair :-providing and supplying nilkaml/ cello/ supreme make visitor chair of plastic with coushion for seat and back of with 55 cm depth 60cm and hight 80 cm with approximate weigth of 4 kg as per approved design and directed by engineer-incharge, dinning chair:-supplying and instalation of 6 seater dinning table of size : 1800mm w x 1200 mm d x 750 mm h with structural frame to be made in 35mm x 50mm x 1.6mm thick powder coated ms box section welded with ms champ made out at of 3 mm thick ms plate at corners. table top to be made up of 25 mm thick prelaminated mdf board conferming to is 14587:1998 table top to have 2 mm reious at the on all edges table fixed with the frame with required fitting solid wood leg to be made of 90mm x 90mm size with solid oke wood with adujustable metal leaveling screw (m10) at the bottom leg to be fixed to the structural frame with m8 philips head bolt. metal finish: all metal component to be structured matte black colour with powder coating more than 60 micron, all exposed wooden part shall be finish with good polish, wood finish with 2 coats of pu coating all wooden panel are stained to pass 4h test, di

State Government

CTN :40901606 Due date: 14 Jul, 202514 Jul, 2025 9.78 Lacs
Tender For providing erecting and fixing of electric pole accessories from check post main road to say site bucharwada panchayat area diu - supplying and erecting led street light fittings with high power white leds wattage of 3 watt and above assembled on single mcpcb, efficiency more than 130 lm/w and corrosion free high pressure die cast aluminum housing with smooth finish powder coated and heat sink extruded aluminium with diffuser and polycarbonate optics/ lenses, with toughened glass with company mark/ name engraved or embossed 160 to 270v, power factor more than 0.95, thd 10%, cct 3000k to 5700k,uniformity ratio >0.45, luminaire efficacy> 100 lumens/ watt. led driver efficiency > 85%. (fittings required lm-79 & lm-80 certificates) (note: below description have shown ranges of wattage capacity of led fittings. the engineer in charge may select any wattage capacity between the ranges shown.) (a) street light (ip-65), surge protection- 4kv integral and, light must have 440vac line supply with over-voltage protection. 90 watts cat. ii (make: wipro, crompton, philips, bajaj, osram) as directed by the engineer-in-charge., providing and erecting street light pole bracket comprising main b class gi pipe of 4.2 cm/ require outside dia. complete with suitable b class g.i sleeve tubing of approx. 45cms.length and suitable for 76.5 mm / 80mm. / require size pole top having sufficient fasteners for fixing the brackets and having spread of 1 mtr. length with suitable rise as per site condition & suitable welded stiffener reducer and nipple with check nut complete painted with one coat of red oxide / pu base primer and two coats of aluminium / pu paint. paint with following nos of arms. single arm bracket 1 mtr, providing and erecting xlpe (is:7098) (i)-88 isi armoured cable multistrand aluminium conductor for 1.1 kv. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables (a) 4 core 16 sq. mm, supplying and erecting flexible pvc insulated multi strand multi core 1.1 kv grade isi marked copper wires of following size to be erected as directed 1.50 sq.mm 3 core round pvc sheathed., providing and erecting pipe type earthing having 150 cms. long and 2.5 cms. dia. galvanised iron pipe with coupling and buch buried in specially prepared earth pit complete with necessary 8 swg earth wire., supplying & erecting earth pit of minimum bore dia. 150mm size approved make earthing electrode consisting pipe-in-pipe technology as per is 3043-1987 made of corrosion free hot dipped g.i. pipes having outer pipe dia of 50mm having 80-200 micron galvanising, inner pipe dia of 25 mm having 200-250 micron galvanising, connection terminal dia of 12mm with constant ohmic value surrounded by highly conductive compound with high charge dissipation suitable for following type of applications with chamber and heavy duty cover. (approved make oem has to submit test certificate) & having back filling compound of (b) inner chemical (ccm compound)- resistivity:- 0.2 / meter testing as per iec 62561-2017, voltage drop:- 1 volt at no load & dry form, sulphar content:- 2%(c) back fill compound :- earthing compound should be capable to retain moisture for long time necessary test report must be submitted. (b) for electrical installation up to 11kv in normal soil length of pipe - 2.00 mtrs back filling compound - 1 nos bag of 25 kg., making trench in soft soil of suitable width of 90 cms deep for laying cable or locating the fault all over the run and backfilling the same and making the surface as normal ground., making trench in hard murrum / tar road of suitable width of 90 cm or required depth for laying any size of cable or locating the fault all over the run and back filling the same and making the surface as normal ground., providing & laying approved make isi marked hdpe 6kg / cm2 (class-3) as per is:4984:1995 pe-80 to be erected at road crossing on or floor as directed for laying of cable. the pipes as follow

Central Government / Public Sector

CTN :40918303 Due date: 30 Jul, 202530 Jul, 2025 NA
Tender For supply of door hold pressing with door hold stiffener,door holding pressing rib,do or clip and door hold top stiffener for bobrn double link wagons to rdso drg no : wd -96038-s-03, item-6,7,8,9 & 11, alt : 7. [ warranty period: 30 months after the date of delivery ]

CTN :40899518 Due date: 21 Jul, 202521 Jul, 2025 98.71 Lacs
Tender For tn-20225 requirement of spares for railway track maintenance at kstps railway siding, kota. - antitheft rail clip rdso drg. no.t-6254 & t-6255, bolt & nut 25x390 mm rdso drg. no t-11534, bolt & nut 25x370mm rdso drg. no t-11532, bolt & nut 25x300 mm rdso drg. no t-11525, bolt & nut 25x260 mm rdso drg. no t-11521, bolt & nut 25x250 mm rdso drg. no t-11520, tapered split pin ce-22994/8, single coil spring washer (for 28 hook bolt), grooved rubber pad rdso drg. no t-5163, bolt&nut (t-5164)for guard rail bridge, 28 hook bolt (330 length), nut for 28 hook bolt (is-549), split pin (for 28 hook bolt)(is-549), grooved rubber pad (10mm) t-5199, elastomeric pad 25mm (245x270x25/30), elastomeric pad 25mm (245x410x25/30), elastomeric pad 25mm (245x220x25/30), check rail bolt rdso drg. no t-11513, curved switch 52 kg 1 in 12 rdso drg. no t-4733 (r), crossing 1 in 8 1/2 p&c t-20806 with complete fittings, elastic rail clip j type rdso drg. no t-4758, fish plate bolt (25x130) rdso drg. no t-11501, fish plate bolt (25x140) rdso drg. no t-1899, fish plate (1mtr.) rdso drg. no t-5915, glued joint 52 kg 6.5 mtr rdso drg. no t-5361, grooved rubber pad rdso drg. no (t-4610), grooved rubber pad rdso drg. no (t-4611), grooved rubber pad rdso drg. no (t-4612), grooved rubber pad rdso drg. no t-4613, grooved rubber pad rdso drg. no t-4614, grooved rubber pad rdso drg. no t-4615, grooved rubber pad rdso drg. no t-4616, grooved rubber pad rdso drg. no t-4617, grooved rubber pad rdso drg. no t-4618, grooved rubber pad rdso drg. no t-4619, grooved rubber pad rdso drg. no t-4620, grooved rubber pad rdso drg. no t-4621, grooved rubber pad rdso drg. no t-4622, p.c. sleepers (mono block)b6-60kg rdso drg. no t-2496, stock rail for 52 kg 1 in 8 1/2, sej 52 kg rdso drawing no. t - 4160, self sovening spring point (spring point) lever mech. -l3040, tongue raill, tongue raill 1 in 8 (approx 4.75 mtr length ) suitable for 52 kg bg track st layout as per rdso ( l), tongue raill 1 in 8 (approx 4.75 mtr length ) suitable for 52 kg bg track st layout as per rdso ( r), grooved rubber pad for sej 52 kg as per rdso drawing (t - 4161, t-4162 & t-4163), channnel sleeper (15 mc 160) 2540mm long, ms brackets rdso drawing no. t-4180, ms brackets rdso drawing no. t-4181, ms brackets rdso drawing no. t-4182, tee head bolts 25mm as per drawing no.t-2659, tee head bolts 25mm as per drawing no.t-2660, plate screw (140x24) mm rdso drawing no. t-3911, plate screw (130x24) mm rdso drawing no. t-3915, plate screw rdso drg no. t-3912, guage tie plate rdso drg. no. t-5203 & t-5203/2, slide chair rdso drawing no. t-4735, slide chair rdso drawing no. t-4736, slide chair rdso drawing no. t-4737, slide chair rdso drawing no. t-4738, slide chair rdso drawing no. t-4739, slide chair rdso drawing no. t-4740, slide chair rdso drawing no. t-4741, slide chair rdso drawing no. t-4742, slide chair rdso drawing no. t-4743, slide chair rdso drawing no. t-4744, slide chair rdso drawing no. t-4745, slide chair rdso drawing no. t-4746, slide chair rdso drawing no. t-4747, slide chair rdso drawing no. t-4748, fish plate (60/52kg) junction (t-696/699), m.s moon washer for s.t sleeper

CTN :40911179 Due date: 03 Jul, 202503 Jul, 2025 NA
Tender For supply of erc rail clip to rdso drg no t5919 and irs specification t312018 (fourth revi sion) as amended uptodate [ warranty period: 30 months after the date of delivery ]
 Loading, Please wait...

Connect us via What's Up