Latest rail crane Tenders | Government rail crane Tenders

State Government

CTN :45303639

06 Jun, 2026 NA

Ranchi - Jharkhand

Tender For e-quotation for seeking firm rates of plant and machinery and materials category items for preparation/amendment of schedule of rate for the year 2026. - m 1055 - pumps supplying submersible pump sets confirming to is 8034 and motor confirming to is 9283. pump shall be suitable for various delivery head and discharge with stainless steel pump shaft and polypropylene/ noryl impeller. motor suitable for working on 415v+10%, 3ph, 50 hz, a.c. supply with cable guard, thrust carbon/ fiber bearing to withstand entire hydraulic thrust, water proof winding shall be provided. the pump set shall be suitable for direct coupling. pump shall have suitable outlet as per manufacturers design. anti thrust stream lined non return valve shall be provided with pump. 3 meter submersible copper conductor cable in single/ double run shall be provided with each pump., submersible pump set 100 mm dia (with polypropylene/ noryl impeller) up to 20 stages 1 h.p. , 1.5 hp, 2 hp, 2.5 hp, 3.0 hp, 4.0 hp, 5.0 hp, submersible pump 150 mm dia (with bronze/ss impeller) up to 8 stages, 1.5 hp, 2.0 hp, 3.0 hp, 4.0 hp, 5.0 hp, 6.0 hp, 7.5 hp, m 1056 - pressure guage providing fabricating, testing and commisioning pressure vessel fabricating in m.s plate on providing foundation including epoxy paint, pressure gauge (100 mm dia), pressure gauge (150 mm dia), vacuum / combination gauge, m 1057 - lifting equipment chain pulley block supplying triple spur gear type chain pulley block suitable for capacity as below with 3 m lift complete with load chain and hand chain suitable for above lift, tested to 50% over load as per is 3832 carrying isi mark., 1 tonne capacity, 2 tonne capacity, 3 tonne capacity, electric operated circular or rectangular travelling crane (single girder) supplying single girder electrically operated rectangular over head travelling crane with 6 m lift complete with wire rope hoist, class ii duty, all three motions electrically operated by suitable rating motor ip 54, control panel and down pendant control block., 5 tonne capacity, above 6 m up to 8 m span, above 8 m up to 10 m span, 7.5 tonne capacity, above 6 m upto 8 m span, above 8 m up to 10 m span, 10 tonne capacity, above 6 m up to 8 m span, above 8 m up to 10 m span, m 1058 - lightening arrester, ab switch, insulators, lightening arrestor supplying, erecting approved make thyrite type lightening arrestor suitable for h.t. supply with necessary ancillary material complete on provided cross arm and connected to overhead line., suitable for 11 kv supply, distribution class, suitable for 22 kv supply, distribution class, suitable for 33 kv supply, station class, disc insulator. supplying, erecting porcelain disc type insulators with hardware fittings suitable for h.t. overhead line complete erected with nuts and bolts on provided cross arm, suitable for 11kv line, suitable for 33kv line, pin insulator supplying, erecting porcelain pin type insulators with hardware fittings suitable for h.t. overhead line complete erected with nuts and bolts on provided cross arm, suitable for 11kv line, suitable for 33kv line, air break switch without earth switch supplying, erecting approved make h.t. outdoor type gang operated air break triple pole switch of required capacity with 3 post / pin type insulator per phase , mounted in horizontal or vertical position on provided cross arm with adequate length of g.i. pipe for operating handle erected on extended square shaft. the operating handle provided with lock and key at suitable height from ground with necessary clamps, suitable for 11kv line, rocking / tilting type, rotating type, suitable for 33kv line, rocking / tilting type, rotating type, air break switch with earth switch supplying, erecting approved make h.t. outdoor type gang operated air break triple pole switch with earth switch of required capacity with 3 post / pin type insulator per phase , mounted in horizontal or vertical position on provided cross arm with adequate length of g.i. pipe for op

Central Government/Public Sector

CTN :45047945

25 May, 2026 NA

Jodhpur - Rajasthan

Tender For rehabilitation & servicing of rail cranes (brn mounted cranes) required for various trd works and attending breakdowns over ju division.

CTN :45189857

28 May, 2026 14.00 Lacs

Faridabad - Haryana

Tender For supply, erection and commissioning of 02 no. six directional eot (electric overhead travelling) crane of 05 tonne capacity at banarasi pump house and kotla pump house by conversion of manual h.o.t. to eot(electric overhead travelling crane) under y.

Central Government/Public Sector

CTN :45226879

27 May, 2026 NA

Dahod - Gujarat

Tender For supply of long travelling wheel for eot crane no. kw-203 as per drawing no. wr/dhd/drg/4-m-7800, material spcn: c55mn75 [ warranty period: 30 months after the date of delivery ] ]

CTN :45235066

25 May, 2026 9.42 Lacs

Allahabad - Uttar Pradesh

Tender For providing and installation of double girder circular eot crane 5 ton with electrically operated hoist class ii duty geared travelling trolley with seven meter control lift complete with long travel rail track 40 mm sq.bar moveing or cross girde

Central Government / Public Sector

CTN :45146143

19 May, 2026 NA

Multi City - Telangana

Tender For auction sale of depot ferrous scrap - 12265ms26b, 98050011, quantity- 41.295 mts. scrap condemned unserviceable ms bed plates, water tanks and water tank cut pieces, ms path plates, foot path plates, sheets, bin cut parts, rack and roller path, air tank cover parts, striker casting wear plates, sliding doors, swing doors, flap doors, ms chequered plates, expansion tank parts, ms plates, plate cuttings, wagon doors, dsl engine long hood, dummy bogie cut parts, cast iron surface plates and base plates, axle counter ms frames, baking oven cut pieces, ocb duct, welding machine outer body, inverter empty body, tap changer ms spares and empty body, manipulator, shaping machine ms body, ms gates, collapsible gates, base plate, short hood cabin cut parts, tables, racks, lavatory chute brackets, ms travelling base, ms danger boards, radiator ms spares, ms die blocks, ms body of radiator fan motor, capacitor ms body, auxiliary transformer ms empty body, ducts, dust bin stand, ht load brake switch body, ms transformer body, ventilator motor frames, transformer top plate, air receiver, storage box cut parts, coach body parts, dust bins, lockers, cattle guard, incinerator chimney parts, incinerator oven, incinerator cut parts, boxes, wagon doors cut pieces, wagon bfr end plates and cut pieces, ms fuel tanks [fire prone], boiler tank cut pieces, angles, girder, sheets cut pieces, pipe bending machine, lathe machine parts, transformer lifting trolley, lifting stands cut pieces, wagon damaged body sheet, floor sheets, pillar type jcb crane dismantled parts, loco lifting tackle assembly cut pieces, portable, jmb duct, stands, channels, fabricated structures, grinding machine body cut pieces cutting crane for utv, and other corroded heavy melting scrap of different thickness of sorts and sizes, with or without attachments. note- 1. gas cutting permitted for the purpose of loading only. 2. it is the responsibility of the purchaser to ensure that fuel tanks to be filled with water and cleaned thoroughly free from flammable substances before cutting to avoid explosion or any casualties. 3. private crane permitted for loading. special note- gas cutting for fuel tank should be done in open area [cutting must be kept clear and free of flammables] and away from bins [free from recognized hazards that are causing or are likely to cause serious harm] and should follow fire-prevention and fire-protection measures. location- [bin no- 265, left side of road no- 2]. hsn code- 72044900. gst- 18 percent. note- delivery on actual weighment basis only. special note: overload of the carrying capacity of the vehicle will not be permitted at the time of taking delivery as per mv act 1988

Central Government / Public Sector

CTN :45056792

26 May, 2026 NA

Ramagundam - Andhra Pradesh

Tender For design, manufacturing, supply & installation, commissioning and proveout of 15t capacity electric overhead travelling crane. detailed technical literature and scope of work as per specification sr.dme/sc/eot-15t/remote/2023 rev-0 attached. ]

Central Government/Public Sector

CTN :45044805

21 May, 2026 NA

Chittoor - Andhra Pradesh

Tender For sitc of 15. ton double girder electric overhead travelling (eot) crane

Central Government/Public Sector

CTN :45011175

18 May, 2026 NA

Ernakulam - Kerala

Tender For supply of 12.5+ 12.5t double girder overhead travelling (eot) crane

CTN :45018401

01 Jun, 2026 NA

Gurdaspur - Punjab

Tender For repair and rehabilitation of 75 and 15 ton electric overhead travelling eot crane installed at 15.45 mw stage 2 unit ubdc power house no1 madhopur pathankot

Rail Crane Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

Central Government/Public Sector

Central Government / Public Sector

Central Government / Public Sector

Central Government/Public Sector

Central Government/Public Sector