Latest rail tester scrap Tenders | Government rail tester scrap Tenders

CTN :40199842

15 May, 2025 NA

Bazpur - Uttarakhand

Tender For supply of pannel, card repair and supply of d.c. motor acfc in sugar mill - repair/calibration of isolation amplifier card of dc panel 75/100/400/500 h.p. d.c. motor, -do - control card of d.c. panel of 75/100/400/500 h.p. d.c. motor, -do - but of power card of d.c. panel of 75/100/400/500 h.p. d.c. motor, -do - but of net work card of d.c. panel of 75/100/400/500 h.p. d.c. motor, -do - but of snubber card of d.c. panel of 75/100/400/500 h.p. d.c. motor, -do - but of electronic regulator card of cane carrier dyno drive motor 50/40 h.p., - do but of synchronous timers e.m.1000., - do chocking card of acfc ., - do power supply card of acfc., - do isolater card., - do - skimmer card., single isolator input 0-10vdc, output 0-10madc, temprature recorder 0-500 c, make-g-tek., pressure gauge 0-15 psi, bottom 3/8 bsp dial size-6 ., nulti meter for 24v & ma measurement., power tester make: taparia., combination pliers insulated make: taparia., control card dcs 880, abb make., fuse 170m6714 (1000a)., thyristor dcr 804., fuse base suitable for din fuse links rated current 1000 a type hb fuse hn size-3, din type fuse links type hn size-3, rated current 1000 a., contactor ax32-30-10 abb make, 3 pole., contactor nx 22e, abb make, 3 pole., mpcb range (10-16) amp. ms1165., power card dcs 880, abb make.

Central Government/Public Sector

CTN :40158795

28 May, 2025 79.00 Lacs

Bhopal - Madhya Pradesh

Tender For supply of geo technical engineering laboratory equipment - laboratory c.b.r. test apparatus - digital and computerized , soaking tank for cbr moulds , rapid moisture meter , automatic soil compaction machine , motorized sieve shaker , humidity chamber , beaker - 500 ml cap. , beaker- 1000 ml cap. , electronic balances - 5 kg , electronic balances 10 kg , sand pouring cylinder - small and large , is test sieves brass frame 20cm dia , is test sieves brass frame 30cm dia , digital microprocessor direct shear apparatus , automatic computer controlled digital tri-axial shear test app with pressure volume controller , and analysis software for cu, uu, cd test , laboratory oven with digital temperature , permeability -soil constant head and falling head , dynamic cone penetrometer , constant rate of strain consolidation testing , consolidation apparatus , liquid limit motorized, plastic limit, shrinkage limit , digital swell test apparatus , digital unconfined compression tester , infrared moisture meter

Corporations/Associations/Others

CTN :40114492

09 May, 2025 NA

Beed - Maharashtra

Tender For supply electrical material for electrical department m.c. ambajogai dist beed - 1.5mm2 1/18 pvc wire 91 mtr, 2.5mm2 1/18 pvc wire 91 mtr, casing caping, 8 way switch board with cover plate, 16 way switch board with cover plate, 6 a 10 a switch, 16 a switch, ceiling fan 1400 mm, cabin fan 400 mm, cooler 55 ltr, 1.5 ton ac with compresser unit, electronic ding dong bell, 18 watt led bulp, 20 watt tube light with all fitting acessaroes, 3 pin plug 16 a, 3 pin plug 6 a, 2 pin socket 6 a, 3 pin socket, fan regulator, 36 watt tube light, condenser 2.5 micro farad, backlit type pendent holder, ding dong bell, batten holder for lamp fitting, 2 pole mcb 16 a-32 a, main switch box with 3 cutouts 16 a each, ceiling rose, cutout kitkat fuse 32 a, electrical insulation tape (box), gi wire, stay wire with stay set, rain coat, gum boot, hexa blade, earthing rod / plate, tube light inbuilt invertor 20 watt, exhaust fan 900 rpm, electric extension board 16a/ 20a with 5 socket, electric extension board 6 a with 4 socket, 2.5 mm2 al. service wire, 4 mm2 al. service wire, 6 mm2 al. service wire, 10 mm2 al. service wire, bell switch, 2 core 6mm2 armad cable, 4 core 10mm2 armad cable, 4 core 16mm2 armad cable, 4 core 25mm2 armad cable, 4 core 35mm2 armad cable, 4 core 50mm2 armad cable, 4 core 70mm2 armad cable, flood light 100 watt, flood light 50 watt, flood light 24 watt, flood light 200 watt, spmcb 32 a, kitkat 63 a, 10/16/25 mm2 al. lugs, 35 sqmm cu. lugs, 18 25 watt led street light, 46-100 watt led street light, 26 45 watt led street light, water heater 1200 watt, distill water for battery, psc pole, hand glous, led bulp up to 10 watt, incandescent lamp up to 100 watt, 200 watt incandescent lamp, soldering machine, driver for outdoor led up to 50 watt, driver for outdoor led up to 55-100 watt, driver for outdoor led up to 105-200 watt, ant conductor for street light phase with gi wire, gnat conductor for neutral, panel box iron body (for meter, timer, contactor, cutout setup, shackle lt insulator, pcb for led lights up to 50 watt, pcb for led lights up to 55-100 watt, electric flyer, electronic type cordless call bell, rubber patch, iron / still lock with chain, screw driver, spanner, cutter, street light bracket 40 mm dia. b class gi pipe 1 mtr in length with clamp & nut bolts, kitkat 100 a, tong tester, drilling machine, torch light with cells, 2500 va digital pur sine vave inverter single phase 230 volts 50 hz, 12 v / 180 ah tubuler battery, 35 sqmm single core copper wire, gi pipe a class 25 mm dia., street light timer, street light contactor 70 am, rsj pole 8 mtr, fan huke with fan clamp

Central Government/Public Sector

CTN :40152110

13 May, 2025 NA

Erode - Tamil Nadu

Tender For supply of electronic torque tester 9- 320 nm as per specification given below:- 1. torque range 09 -320 nm. 2. for verifying an d setting clock wise torque wrenches 3. easy to operate electronic torque tester with integrated torque transducer4. measurement accuracy : +/- 1% tolerance of reading +/- 1 digit.5. break point measurement (1st peak) 6. autoreset.7. tool weight 3kg (approx) make/model : dremotest e-09-320 of gedore (or) of the same specification in stahlwille, ks tool only note: 1. firm should submit a uthorized dealership certificate along with tender otherwise offer will not be considered. 2. item to be supplied along with calibration and warranty certificate. [ warranty period: 12 months after the date of delivery ]

State Government

CTN :40051538

23 Apr, 2025 NA

Saoner - Maharashtra

Tender For supply of electrical material at gp/kelwad/zp/ngp/tender no1/2025-26/1st call - items :, 40 w tube rod bajaj, 1 mm copper wire, tube light starter bajaj, choke 36 watt bajaj, electronic choke bajaj, p. l. 36 watt 4 pin tube rod bajaj, copper wire 1.18 gaje 44 v-guard, copper wire 1.18 gaje 36 v-guard, copper wire 7/20 gaje 36 v-guard, copper cable 2.5 mm flat three core, copper cable 4 mm flat three core, aluminum service wire 2 core 10mm, aluminum service wire 2 core 6mm, copper wire langs 8mm, copper wire langs 10mm, copper wire langs 12mm v-guard, cfl pipe (m.s.) size 3/4, p.l. body (m.s.), lad m.s. pipe 1, 32 mpr kitkat ashoka, 63 mpr kitkat ashoka, 100 mpr kitkat ashoka, main swich 32mpr 3 pol ashoka, main swich 63mpr 3 pol ashoka, p.v.c tape steelgrip, tube rod side holder bajaj, 7/20 single wire 10 gauge copper, 7/20 single wire 15 gauge copper, single 25mm multi strand wire copper, single 35mm multi stand wire copper, tester taparia 813/500v ~, 7.5 hp starter l&t mug-10 ltlk, 10 hp starter l&t mug-20 ltlk, 15 hp starter l&t mug-30 ltlk, 20 w street light [new shape] full fitting syska, 30 w street light [new shape] full fitting syska, 50 w street light [new shape] full fitting syska, mercury copper choke 250w bajaj, mercury copper choke 500 w bajaj, halogen rod 250w bajaj, halogen rod 500w bajaj, halogen holder thread bajaj, halogen ingeniator 250w bajaj, halogen ingeniator 500w bajaj, halogen lad 50w white bajaj, halogen lad 100w white bajaj, halogen lad 150w white bajaj, round cable 2.5 mm 3 core copper, 6 mm flat wire 3 core copper v-guard, 4 mm flat wire 3 core copper v-guard, 2.5 mm flat wire 3 core copper v-guard, 4 pin pl body complete bajaj, led 18w street light with lens type syska, led 40w street light with lens type syska, led 60w street light with lens type syska, led 70w street light with lens type syska, 7.5 hp fully automatic star - delta starter l&t ltlk rang 13/21, 10 hp fully automatic star - delta starter l&t ltlk rang 21/32, 12.5 hp fully automatic ltlk rang 28/45 panal, 15 hp fully automatic ltlk rang 28/45 panal, 25 hp fully automatic ltlk panal, main switch local 63 mpr, timer watch electric ltlk, led bulb 40w philips, led bulb 60w philips, connector strip 15a, led tube rod lad 20w bajaj, four pin lad tube rod 18w bajaj, four pin lad tube rod 20w bajaj

Central Government And Public Sector

CTN :40065883

08 May, 2025 1.80 Crore

Delhi - Delhi

Tender For supply of toy testing equipment for crcl - degree automatic flammability tester , horizontal and vertical flame , mouth-actuated catapult endurance tester for toys , push pull test stand , pen-cap air flow tester , noise testing stand , wide-mouth clamp , clamp for wheel tension , hook test fixture for cords and loops , toys chest lid tester , baby stroller testing machine rotating test , test finger probe and accessibility probe , baby trolley dynamic durability testing machine , baby trolley handle durability , toy kinetic energy tester , baby stroller handle dynamic durability tester , laboratory drying oven , glow wire test apparatus , impact test table , seam clamp for toys tension , mouth-actuated tester , toys flammability tester , sharp edge tester , sharp point tester , flammability testing nailed , dynamic strength tester and 2 , high chair comprehensive testing , toys scooter steering tubes strength tester , small part cylinder , high chair back and arm impact testing machine , ball impact tester , kinetic energy tester , colour fastness to dry cleaning , noise meter , surface flash tester , small torque fixture , rattle test template , middle torque fixture , flexure tester , long - mouth clamp , two pronged clamp , three pronged clamp , average speed tester , brake performance tester , motor brake performance testing ramp , small ball test template , large torque fixture , hand held metal detector , ring gauge , imada digital force gauge , flat clamp , tensile tester , compression test disc , bite tester , tension clamp , motor horizontal brake performance tester , en drop tester , gap test round , short mouth clamp , liquid leak test needle , hair clamp , bench vice , feeler gauge , static strength test , test platform block , dynamic strength test load , static strength test load , overload test loads for ride-on toys and seats , air compressor , loads for stability test , toy handlebar resistance to separation tester , electronic metronome , wheeled toys tumble test steps , plastic and film thickness gauge , toy tester jaw entrapment risk test fixtures , torque gauge gt-tohnichi , part 1 weight cantry crane , toy calibrated test weight , yo-yo balls measurement , breakaway feature separation , toy tester separation tester , part 1 self-retracting ropes tester , toy safety tester self-retracting ropes tester , part 1 length of ropes and chains tester , test instruments length of ropes and chains tester , perimeter of ropes and chains tester , part 1 rattle test template stand , digital torque tester , digital cap torque tester , sound level calibrator , push-pull scale force gauge , drop tester , pacifier tester , part 1 12mm feeler gap gauge

CTN :40065085

09 May, 2025 NA

Warangal-T - Telangana

Tender For supply of qa lab equipment - auto density meter malkapur , auto density meter jammu , camc auto density meter malkapur , camc auto density meter jammu , auto distillation unit malkapur , auto distillation unit jammu , camc auto distillation unit malkapur , camc auto distillation unit jammu , auto flash point tester abel malkapur , auto flash point tester abel jammu , camc auto flash point tester abel malkapur , camc auto flash point tester abel jammu , uvf sulphur analyser malkapur , uvf sulphur analyser jammu , camc uvf sulphur analyser malkapur , camc uvf sulphur analyser jammu , stabinger svm 3001 malkapur , stabinger svm 3001 jammu , camc stabinger svm 3001 malkapur , camc stabinger svm 3001 jammu , electronic balance malkapur , electronic balance jammu , ups 20 kva malkapur , ups 20 kva jammu , computer including all equipments malkapur , computer including all equipments jammu , printer laser malkapur , printer laser jammu , semi automatic manual distillation unit malkapur , semi automatic manual distillation unit jammu , manual abel malkapur , manual abel jammu , manual pmcc malkapur , manual pmcc jammu , manual kv bath 40 deg c malkapur , manual kv bath 40 deg c jammu , pour point bath malkapur , pour point bath jammu , magnetic stirrer with hot plate malkapur , magnetic stirrer with hot plate jammu , copper corrosion apparatus malkapur , copper corrosion apparatus jammu , cooling cabinet malkapur , cooling cabinet jammu , fume hood malkapur , fume hood jammu , roe bath malkapur , roe bath jammu , hot air oven malkapur , hot air oven jammu , spot extractors inc duct chem module malkapur , spot extractors inc duct chem module jammu

CTN :39846876

21 Apr, 2025 NA

Bangalore - Karnataka

Tender For corrigendum : supply of integration tool kit for aircraft power system - positive grip straight head screw driver set , asme b 18 point 3 standard l style hex key set , alloy steel rust proof soft metal cutting plier , chemical resistant-forged jaws- flat nose plier , chemical resistant- forged jaws- round nose plier , chemical resistant-forged jaws- long nose needle plier , wire stripper-12 to 20 gauge , wire stripper normal , ss 316l grade fine pitch components tweezers- straight , ss 316l grade fine pitch components tweezers- bent , retractable utility knife with blade , non-contact voltage tester , electrical insulation tape -red-black and blue , rohs compliant rma solder wire , solder flux -wax type , 99 point 9 percent pure isopropyl electronic grade-el grade , astm d5363 standard dimethyl acrylate high strength adhesive , premium masking solvent and paint resistant tape , integrated 94pc quarter inch and half inch socket set , cable zip ties 150mm long- pack of 100 , cable zip tie 250mm long- pack of 100 , ambidextrous scissor- length 240mm bid number/ & ( * ) : gem/2025/b/6023510 dated/ + : 27-03-2025 bid document/ 3 3 1 / 23

Corporations/Associations/Others

CTN :39977657

24 Apr, 2025 NA

Kannad - Maharashtra

Tender For corrigendum : supply of material for electrical department - , 5 w led bulb, 9 w led bulb, 18w led bulb, led wall spot light 50 w, incandescent bulb 100 w/200w, gate/garden light fitting with 200mm dia. glass bowl suitable for upto 12 w led lamp, pendant bulb holder, modular angle holder, bulb holder with socket, modular switch board 12, modular switch board 6, modular switch board 4, switch 6a, switch 16a, modular socket 6a, modular socket 16 a, brass point kit-kat 16 a, brass point kit-kat 32 a, brass point kit-kat 63 a, brass point kit-kat 100 amp, main switch 1 ph. 16 amp 240 v. (max) ( distribution board), main switch 1 ph. 32 amp 240 v. (max) ( distribution board), main switch 3 ph. 32 amp 415/500 v. (max) (db), main switch 3 ph. 63 amp 415/500 v. (max) (db), main switch 3 ph. 100 amp 415/500 v. (max) (db), supplying, erecting & marking spmcb 6a to 32a, cseries (for motor/power), supplying, erecting & marking spmcb 40a to 63a cseries (for motor/power), supplying, erecting & marking dpmcb 6a to 32a, cseries (for motor/power), supplying, erecting & marking dpmcb 40a to 63a, cseries (for motor/power), supplying, erecting & marking tpn mcb 6a to 32a, c- series, supplying, erecting & marking tpn mcb 40a to 63a, c- series, mcb box 6 way, mcb box 4 way, mcb box 2 way, power plug complete set, hand dryer machine, copper lugs 25mm, copper lugs 50 mm, aluminum lugs 25mm, aluminum lugs 50 mm, digital multimeter, pole conatcor 45 a, contatcor 75 a, g.i. wire 18 number, dwc 50 mm pipe, 2 way switch, insulated tape (30 tape), electric drill machine, tester, m seal pocket, pvc box 4x4, screw 3/4 inch, screw 1 inch, screw 1.5 inch, screw 2 inch, screw driver set, cutter, pakkad, hammer, extention box 4 way or 6 way pin socket (isi mark), supplying and erecting ding dong / electronic musical type call bell with heavy duty coil suitable to operate on 230v a.c, regular/ standard model ceiling fan of 600mm., supplying five star rated energy saving ceiling fan 230 v a.c. 50 cycles 1200 mm, supplying and erecting cabin fan of a.c. 230 v. 50 cycles 400 mm. sweep, supplying and erecting fresh air cum exhaust fan of light duty250 v a.c. 50 cycles 225mm. 1400 rpm, supplying evaporative air cooler (desert cooler) with galvanised steel body 230/250 volts, 50 cycles, normal cooling capacity of 60 to 70 cu.m per minute with 15" exhaust fan, minimum 68 litre water capacity tank complete, metal work in crca sheet with fabrication, supplying and erecting isi mark modular type 3 pin 6 / 16a multi socket with safety shutter, capacitor for ceiling fan 600/ 900/ 1200/ 1400 mm. sweep,, supplying and erecting electronic type step regulator for ceiling fan 600/ 900/ 1200/ 1400 mm. sweep, complete erected on provided switch board, pvc pipe heavy duty 3/4 1, pvc l-bow 3/4 1, pvc t 3/4 1, pvc bend 3/4 1, g.i saddle 3/4 1, pvc junction box one-way 3/4 1, pvc junction box two-way 3/4 1, pvc junction box three-way 3/41, pvc junction box four-way 3/4 1, supplying and erecting pvc trunking (pvc casing- capping) of size 25 mm with accessories on wall/ceiling, supplying and erecting pvc trunking (pvc casing-ncapping) of size 32 mm with accessories on wall/ceiling, casing t section 25 mm, casing t section 32 mm, casing l section 25 mm, casing l section 32 mm, pvc gitti, wooden gitti, earthing wire 32 no. (isi mark), earthing wire 18 no. (isi mark), pipe type earthing 40mm gi pipe or gi rod 20mm, g.i pipe a grade 50 mm (isi mark), earthing plate (isi mark), ceilling rose, 2x1.5 sqmm fr copper pvc insulated wire, 2x1.5 sqmm fr aluminum pvc insulated wire, 2x2.5 sqmm fr copper pvc insulated wire, 2x2.5 sqmm fr aluminum pvc insulated wire, 2x4 sqmm fr copper pvc insulated wire, 2x4 sqmm fr aluminum pvc insulated wire, 2x6 sqmm fr copper pvc insulated wire, 2x10 sqmm fr copper pvc insulated wire, 2x10 sqmm fr aluminum pvc insulated wire, 3x6 sqmm fr aluminium pvc insulated wire, 3x10 sqmm fr aluminium pvc insulated wire, service wire 4mm, single core 6

Central Government/Public Sector

CTN :40028408

06 May, 2025 NA

Delhi - Delhi

Tender For supply, installation and demonstration of electronic torque wrench tester with integrated tor que transducer (dms), torque wrench 90-1100mm as per annexure attached. [ warranty period: 30 mon ths after the date of delivery ]

Rail Tester Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Corporations/Associations/Others

Central Government/Public Sector

State Government

Central Government And Public Sector

Corporations/Associations/Others

Central Government/Public Sector