Latest rail welding machine Tenders | Government rail welding machine Tenders

Corporations/Associations/Others

CTN :45721980

06 Jul, 2026 10.00 Lacs

Pune - Maharashtra

Tender For motor and pump maintenance along with material supply for bhor municipal council - rewinding of different capacity motors, 90 h.p, 60 h.p, 50 h.p, 25 h.p, 12.5 h.p, 10 h.p, 7.5 h.p, 5 h.p, 2 h.p, supply of bearing no. 6318, supply of bearing no.7322, supply of bearing no. 6316, supply of bearing no.7320.13, motor dismantling and repairingand erection, 90 h.p, 60 h.p, 50 h.p, 25 h.p, 12.5 h.p, 10 h.p, 7.5 h.p, 5 h.p, 2 h.p, repairing of 90 hp v.t. pumps -dismantling and repairing and erection of following capacity v.t. pumps with bowl assembly , column pipe ,shaft, bearing ,bushing as par sapplied including all cost of skilled labour, transportation, loading unloading and all applicable taxes (old scrap material should tekan by contractor and cost of scrap should deduct and final offer should quote), repairing of 60 hp v.t. pumps -dismantling and repairing and erection of following capacity v.t. pumps with bowl assembly , column pipe ,shaft, bearing ,bushing as par sapplied including all cost of skilled labour, transportation, loading unloading and all applicable taxes (old scrap material should tekan by contractor and cost of scrap should deduct and final offer should quote), supply of various parts for 90 h.p pump stuffing box bronze bushing., supply of various parts for 90 h.p pump gland sleeve s/s material., supply of various parts for 90 h.p pump top bowl repair with providing and welding of m.s. flange heavy duty with required sundry etc., supply of various parts for 90 h.p pump column pipe repair with welding if ribs m.s. flange with machining etc., supply of various parts for 90 h.p pump rubber bush, supply of various parts for 90 h.p pump shaft sleeve s/s material, supply of various parts for 90 h.p pump providing and fixing special strengthening heavy duty nut bolts., supply of various parts for 90 h.p pump rubber packing (chanmpion), supply of various parts for 90 h.p pump neck ring brass., supply of various parts for 90 h.p pump bowl bush rubber., supply of various parts for 90 h.p pump bowl bush brass., supply of various parts for 90 h.p pump impeller., supply of various parts for 90 h.p pump impeller turning, supply of various parts for 90 h.p pump spider bushing, supply of various parts for 90 h.p pump bowl assembly fitting, tafflon gland, supply of various parts for 60 h.p pump stuffing box bronze bushing., supply of various parts for 60 h.p pump gland sleeve s/s material., supply of various parts for 60 h.p pump top bowl repair with providing and welding of m.s. flange heavy duty with required sundry etc., supply of various parts for 60 h.p pump rubber bush, supply of various parts for 60 h.p pump shaft sleeve s/s material, supply of various parts for 60 h.p pump providing and fixing special strengthening heavy duty nut bolts., supply of various parts for 60 h.p pump rubber packing (chanmpion), supply of various parts for 60 h.p pump neck ring brass., supply of various parts for 60 h.p pump bowl bush rubber., supply of various parts for 60 h.p pump bowl bush brass., supply of various parts for 60 h.p pump impeller., supply of various parts for 60 h.p pump impeller qualate., supply of various parts for 60 h.p pump spider bushing, supply of various parts for 60 h.p pump bowl assembly fitting, repairing of starter, rewinding of 90 h.p. starter trasformer capacity with f class copper wire insulation including air drying ,varnishing with dr. bake warmish, backtoling, including all cost of skilled labour, dismantling trasformer transportation , loading, unloading, erection, and giving trial and testing and applicable of all taxes. (old scrap material should tekan by contractor and cost of scrap should deduct and final offer should quote.), rewinding of 60 h.p. starter trasformer capacity with f class copper wire insulation including air drying ,varnishing with dr. bake warmish, backtoling, including all cost of skilled labour, dismantling trasformer transportation , loading, unloading, erection, and giving trial and

Central Government/Public Sector

CTN :45727933

17 Jul, 2026 NA

Bhusawal - Maharashtra

Tender For supply of push pull rod for wap7/wag9 loco as per clw drg. no. 1209-01.113-006 alt-6 consisting of (1) flange as per clw drg. no.1209-01.113.007, alt-7 or latest (2) tube welding as per clw drg.no. 1209-01.313.008 alt-5 or latest and push pull rod flange hole size as perrdso smi no. rdso/2006/el/0241 (rev.o) dated 24.10.06. [ warranty period: 30 months after the date of delivery ] ]

State Government

CTN :45706764

17 Jul, 2026 NA

Kheda - Gujarat

Tender For supply of various consumable & routine maintenance items for unit 1, 2 & 3 stage: i at wtps - teflon tape : size 1/2" width x 12mtr long, m seal fast curing epoxy compound, each packet contains 50 grams of resin base and 50 grams of hardener ( 1 kg box contains 10 packets)., hss hacksaw blade,size-1/2"bx12"lx0.025"thx18tpi., wire brush with wooden handle size 50x150x300 mm, hiffin diamond lapping compound hi finator grade 14-05-30 ( in plastic injection ; per injection 5gm), rustolene 500 ml/tin, holdtite liquid joint compound[500gms/pkg]4565250014, chrome leather hand gloves for welder. size: 16 inch (400 mm), metal set putty, bearing retainer, epoxy based fast curing cold metal repair compound., oil stop leak putty 114 gms. pack, descaler [biodegradable water scale cleaner], pen oil - (500 ml/tin) heavy duty rust penetrator, molykote 1000 (1kg/tin), rust removing spray wd-40 in aersole packing of high pressure valves ., h577 pipe sealant ( per tube 50 ml ), instant flange sealant & gasketing compund h510/510, molykote 1000 spray can (400ml/270gms/can), grinding disc (wheel) size 100x4x16 mm, mos 13750 high cut (a.36) ., resinoid cutting off wheel size 350x25.4x3 mm, a24 ., wel.lead glass black, white plain glass for welders hand screen, esab/iol make gas heating torch, oxygen gas hose pipe blue 08 mm, make esab/dura., acetylene gas hose pipe red 08 mm, make esab/dura., two stage two gauge oxygen gas pressure regulator - model no : dura 0-10 - esab make, two stage two gauge acetylene gas pressure regulator model : dura a-1.5 - esab make, wire brush size 12" with wooden handle, cutting nozzle size 3/64", cutting nozzle size 1/16", carborandum make emery cloth roll medium iss: 50-60 size: 50 mtrx25 mm, carborandum make emery cloth roll fine iss: 80-100, size: 50 mtrx25 mm, brand emery paper smooth fine size size 280 x 220 mm, flash back arrestor for cutting torch end mounted oxygen ., flash back arrestor for cutting torch end mounted da ., flash back arrestor for regulator mounted da cylinder., flash back arrestor for regulator mounted oxygen cylinder., gas cutting nozzles (1/32"), filler gauge set of 26 blades in mm 6" long, welding helmet, welding hand gloves leather size 14" for welding assly., welding cable copper conductor having single core high conductivity, suitable for 600 amp. of quality 70 sq.mm 999/0.3 mm as per is-9857/1990 vir insulated., hand screen armour, adhesive hylomer universal blue [100 gms/pkg/nos], pvc tap roll, oil paper size 2 x 2 x 1 mm thk, pvc hand gloves acid/alkali proof, hand gloves for heat resistance up to 350 deg. celsius: hand gloves with constructed from 100 percentage kevlar para-armid fiber with a cotton liner, size 10 (400mm). heat resistance for up to 350 deg. celsius temperature., blue matching tube camel student oil colour shade ultrasonic black-663 (in 20 ml tube), teflon tape : size 1/2" width x 12mtr long, m seal fast curing epoxy compound, each packet contains 50 grams of resin base and 50 grams of hardener ( 1 kg box contains 10 packets)., hss hacksaw blade,size-1/2"bx12"lx0.025"thx18tpi., wire brush with wooden handle size 50x150x300 mm, hiffin diamond lapping compound hi finator grade 14-05-30 ( in plastic injection ; per injection 5gm), rustolene 500 ml/tin, holdtite liquid joint compound[500gms/pkg]4565250014, chrome leather hand gloves for welder. size: 16 inch (400 mm), metal set putty, bearing retainer, epoxy based fast curing cold metal repair compound., oil stop leak putty 114 gms. pack, descaler [biodegradable water scale cleaner], pen oil - (500 ml/tin) heavy duty rust penetrator, molykote 1000 (1kg/tin), rust removing spray wd-40 in aersole packing of high pressure valves ., h577 pipe sealant ( per tube 50 ml ), instant flange sealant & gasketing compund h510/510, molykote 1000 spray can (400ml/270gms/can), grinding disc (wheel) size 100x4x16 mm, mos 13750 high cut (a.36) ., resinoid cutting off wheel size 350x25.4x3 mm, a24 ., wel.lead glass black, whi

CTN :45724340

06 Jul, 2026 7.75 Lacs

Multi City - Telangana

Tender For procurement of leakage materials arresting of leakages and in division no.44, 45, 46,47,62,63 and 64 under annual maintenance for the year 2026-27 - 150 mm dia , 150 mm dia 15 mm thick , 160 mm dia , 200 mm dia , 200 mm dia 15 mm thick , 200 mm dia hdpe , 315 mm dia hdpe , 350 mm dia m.s , arresting of leakages at various locations in ward no. 44,45,46,47 &48 including earthwork excavation and arresting of leakages with required materials and red rock cement, portland cement, caulking, necessary apparatus leakage arresting and refilling of the excavated earth includind cost and conveyance of all tools materials and labour charges etc., complete. (a) 160 mm dia hdpe , cost of m.s flanges including cost of bolts, nuts, rubber packing etc., complete and flange thickness conforming to is:7322-1985 and flange dimensions conforming to is:1538-1993 excluding cost of ms specials including cost and conveyance to site etc., complete. (a) 100 mm dia 15 mm thick , manufacture, supply and delivery of di d/f gate valves (soft seated) resilient seated soft sealing gate valves (sluice valves) with body bonnet of ductile cast iron of grade ggg-40/ sg- 400/15 or ggg-50/sg-500/7 or equivalent grade as per i.s.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with epdm food grade quality and seals of nbr and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per bs5163-89/is14846-2000/din 3202 f 4. all the valves should be with electrostatic powder coating both inside and outside pocket less body passage. drilled as per requirement of the dept. (a) 100 mm dia , manufacture, supply, & delivery of hdpe fittings conforming to is 4984 - 1995 including transportation to anywhere in t.g. excluding taxes. pipe end long neck (a) 110 mm dia , manufacture, supply,& delivery of high density polyethylene pipes (pe-100 grade) for water supply conforming to is 4984-2016 including transportation to any where in t.g, but excluding gst and specials etc.,complete(supply upto 90 mm dia in coil & above 90 mm dia straight length in 6 metres.) 8 kg (a) 110 mm dia hdpe , supply and delivery of 53 grade opc cement bags including all charges etc., complete as per the directions of the departmet officer in charge. , supply and delivery of frc cement supply 5 kg bag including all charges etc., as per the directions of the departmet officer in charge complete. , supply and delivery of nuts and bolts including all charges etc., complete.as directed by the deparment officer in charge. , supply and delivery of packing rope including all charges as per the directions of the departmet officer in charge. , supply and delivery of rubber sheet including all charges etc., as per the directions of the departmet officer in charge complete. , supply, fabrication and fixing in position of ms for windows and grills including cost and conveyance of all material and all labour chages for fabricating, fixing including cost of welding rods, power charges, xcluding cost of fixing in positio etc complete.

CTN :45717001

13 Jul, 2026 5.61 Lacs

Saharanpur - Uttar Pradesh

Tender For tender for satisfactory trial. , carry out strengthening work using the channels and angles provided by src and irc and conduct a satisfactory trial. , to fabricate the weak sloppy plates of the donali suit fitted on milo from the given ms plate as per the drawing and give a satisfactory trial. , removing the worn out trpf cover fitted on the mill and making and fitting a new cover using the plate given as per the drawing sample and giving a satisfactory trial. , to carry out the work of tipping the teeth of mill rollers and conduct a satisfactory trial. , to carry out the work of chevron cutting as per requirement on mill rollers and give satisfactory trials. , work involving the errectation of broken teeth on the mill s pressure chute repair of worn out teeth via hard facing and conducting a satisfactory trial run , dismantling the old pressure chute errected on the mill completely replacing the corroded section repairing and welding the damaged parts of the ss plate reassembling the unit fitting it onto the mill , fabricate the juice tank for the mill house using the provided 6 8 mm plate and conduct a satisfactory trial run , removing the bottom of the supply juice tank errecting a 12 mm plate in its place and conducting a satisfactory trial. , manufacturing the bed for the s.r.c. and i.r.c. motor gear and conducting a satisfactory trial. , remove the worn out trpf headstock side plate errect a 6mm plate in its place and conduct a satisfactory trial. , fabricating teeth for the hydraulic grab replacing old or damaged teeth with new ones and conducting a satisfactory trial run. , a dismantling old columns beam channels etc. b manufacturing and installing new columns beam channels etc. , removing the old corroded platform and replacing it with a new one. , installing 16 inch 18 inch manholes with blinds , constructing a bed for the pump fitting the pump and motor and conducting a trial run of up to 20 hp. , dismantling fabricating and erecting weak corroded pipe lines up to 12 inch and providing satisfactory leak proof trials. , dismantling fabricating and erecting weak corroded tees up to 12 inch and providing satisfactory leak proof trials. , dismantling fabricating and erecting weak corroded nipples up to 12 inch and providing satisfactory leak proof trials. , dismantling fabricating and erecting a weak throated cross member up to 12 inch and providing satisfactory leak proof trials. , dismantling fabricating and erecting a weak throated band up to 12 inch and providing satisfactory leak proof trials. , dismantling fabricating and erecting a weak throated flange up to 12 inch and providing satisfactory leak proof trials. , dismantling fabricating and erecting a weak sloping reducer up to 12 inch and providing a satisfactory leak proof trial.

State Government

CTN :45710108

30 Jun, 2026 NA

Mahendragarh-Hr - Haryana

Tender For pathera block: kanina panchayat: pathera dist.: mahendragarh annual maintenance work for water supply. - providing and fixing of nut & bolt, providing and fixing starter oil, providing and fixing of 6 mm sq submersible cable 3 core, dismantling old and used gi flanged pipe line, making new key for 100mm dia s.v 6 feet long 20mm dia gi pipe inculding welding handle ci cap suppoting ms patti, providing and fixing ci flange, gi bend, rubber sheet, repair of 50 hp starter

State Government

CTN :45713281

30 Jun, 2026 NA

Mahendragarh-Hr - Haryana

Tender For dismantling old and used gi flanged pipe line 50mm i/d /50 mm / s.s. flange, canal t/well, pathera , labour for submersible pump & motor lowering and lifting. /labour for submerseable lowering and ,unlowering / cable change, mata t/well, sehlang, pipe exension canal t/well, pathera ,making new key for 100mm dia s.v 6 feet long 20mm dia gi pipe inculding welding handle ci cap suppoting ,ms patti complete in all respect. /c.i. key for 4 s/valve / water works, baghot ,supply & fixing 100 amp kit kat/100 amp / bus stand t/well, pathera 150 mm/p/f c.i. flange 150mm, canal t/well, sumpwell, pathera 35 bhp starter repair complete including labour charges / banga t/well, sehlang 50 mm/ near bus t/well, pathera ,threading in 6 flange / sumpwell, pathera

State Government

CTN :45678034

14 Jul, 2026 28.50 Lacs

Jummu - Jammu And Kashmir

Tender For providing, installation, testing and commissioning of electro-mechanical equipments at newly drilled t/well peerkho. - providing of 3 nos. submersible pump sets :- the job involves providing of 3 nos. submersible pump sets of specification 15000 gph x 80 m head of reputed make (one no. operational and two nos. standby) along with allied accessories to be installed in 10/12 inch dia. deep drilled new tube well peer kho. the job includes fabrication, providing and fitting of 2 no. clamps of span as per the required length to be fabricated and fitted with submersible pump sets with the help of heavy duty bolts and nuts (01 no. clamp to each pump set). the job also includes fabrication of 2 no. graded expander/ reducer for nrv of required size to be fabricated out of suitable thickness ms pipe threaded at one end and flanged at the other end. fitting of reducers/ expanders with 125 mm dia. column pipes at one end with flanged joint and with the discharge outlet of the submersible pumps at the other end.column pipes :- fabrication and providing of 125 mm dia. b class ms 20 nos. column pipes flanged on both ends. the length of each pipe shall be 3 mtrs. and shall be completely leak proof. the ms pipe shall be confirming to relevant isi specifications. the heavy duty flanges shall be furnished properly. one end of the flange shall be faced in such a way that a leak proof joint is made by providing and fitting a rubber sheet in between the two flanges and tightening it with nuts and bolts. each flange shall be provided with 6 no. equidistant holes of required dia. the job also includes welding of flat iron strips at each end for giving extra strength to the flanged joint and providing of 2 no. grooves on each flange on opposite sides for submersible cable to be accommodated though it. the welding of heavy duty flanges with the pipe should be carried out with superior quality pipe welding electrodes. then painting all the pipes with a coat of anti corrosive paint and two coats of super enamel paint. ms well cap, washout and riser pipe :- fabrication and fitting of ms well cap as per casing dia. of 8 mm thickness with one hole of approx 125 mm dia. in the centre and with holes/ cuts at an appropriate distance for passing submersible cable. providing and fitting of an arrangement for gi fitting near the discharge head outlet to provide water feeding to the gravel around the tube well casing. laying of delivery line for making of inter connections of top column pipe of new tube well by way of fabricating 900 ms bend out of 125 mm dia. ms pipe, welding of 2 no flanges one at each end. fabrication and fitting of 125 mm dia. ms pipe connection piece long as per site requirement with 90 degree bend with the help of nuts, bolts, washers, rubber sheet in between for leak proof joint. fitting of 1 no. 125 mm dia. heavy duty c.s. sluice valve through a connection piece as per site condition. fabrication, providing and fitting of 1 mm dia. heavy duty cast steel reflux valve. the sluice and reflux valve shall be confirming the isi standards and shall be of reputed make. fabrication and fitting of another 125 mm dia. connection piece flanged at both ends for working of washout by way of interconnecting delivery pipe through tee joint with the washout pipe.. fabrication and fitting of 1 no. blind flange at the end of washout. painting of exposed parts of the delivery line with two coats of anti rust primer and one coat of super enamel paint. the job also involves fabrication and fitting of one set of u-shaped clamps (for holding 125 mm dia. pipe) on the top column pipe for holding of column assembly on the casing and fabrication of 1 set of u- clamps to be used for extraction/ lowering of pump set along with column assembly. complete job includes cost of material, labour charges and carriage etc. and also making provision for wash out by providing and fitting of sluice valve of c.s of required capacity as per site conditions.lowering of submersible p

Central Government/Public Sector

CTN :45692093

01 Jul, 2026 NA

Rourkela - Odisha

Tender For spares for welding stand pivot assy. at(14items) comprising of following: - shaft,85/40x197mm,pivot,pd/r-375284,p:15 , - screw rod,33x327mm,pivot,pd/r-375285,p:1 , - plate,140x122x22mm,pivot,pd/r-375285,p:2 , - block,140x29x25 mm,pivot,pd/r-375285,p:3 , - plate,82x49x20 mm,pivot,pd/r-375285,p:4 , - bush,80/60x43mm,br,pivot,pd/r-375285,p:5 , - bush,35/25x54mm,br,pivot,pd/r-375285,p:6 , - fab. flange assy,pd/r-375285,p;7(8-15) , - fab block assy,pvt,pd/r-375284,p:7(8-14) , - flange assy,f/pivot,pd/r-375284,p:1(2-6) , - bar assy,f/pivot,pd/r-375283,p:10(11-12) , - bar,475x74x20 mm,f/pivot,pd/r-375283,p:9 , - rlr beam assly,f/pivot,pd/r-375283,p:1 , - bush,dia.20/30x28,psa m2,pd/r-90895,p:6 ,

CTN :45692319

06 Jul, 2026 19.24 Lacs

Udhampur - Jammu And Kashmir

Tender For supply of pipe unions confirming to is 1239 (part 2) (q4) , elbow, equal, 135 degrees conforming to is 1239 (part 2) (q4) , elbows reducing confirming to is 1239 (part 2) (q4) , running nipples, close taper nipples and barrel nipples confirming to is 1239 (part 2) (q4) , steel sockets confirming to is 1239 (part 2) (q4) , socket reducing confirming to is 1239 (part 2) (q4) , elbows, tees and crosses, male, equal confirming to is 1239 (part 2) (q4) , elbows, tees and crosses, equal confirming to is 1239 (part 2) (q4) , plug confirming to is 1239 (part 2) (q4) , switch changeover side handle 630a 4p , switch changeover front operated 320a 4p , changeover switch front operated 200a 4p with ss enclosure , changeover switch side handle 100a 4p with ss enclosure , sensolite 9w motion sens led bulb , switch changeover front operated 400a 4p , sensolite 12w motion sens led bulb , tyre coupling s100 for pump and mot 20 no , tyre coupling s100 for pump and motor 17 no , tyre coupling s100 for pump and motor 18 no , tyre coupling s100 for pumpand mot 14 no , tyre coupling s100 for pumpand mot 15 no , float valve complete ptmt 15mm , mak premix ready road repair patching compound f roads flo packing size 25 kg , switch changeover side handle 63a 4p , casing capping 25x25mm , casing capping 20x25mm , rubber flange 12 inch , casing capping 15x25mm , casing capping 15x20mm , rubber flange 10 inch , rubber flange 8 inch , rubber flange 6 inch , float valve complete ptmt 20mm , rubber flange 4 inch , tissue paper stand with flap chrome finished , sliding bolt aluminium 200 mm long , rubber sheet gasket 3mm thickness , hacksaw blade double side1 inch x12 inch , ms studs bolts of size 6mm dia x 25mm length with nut and washer , ms studs bolts of size 6mm dia x 30mm length with nut and washer , ms studs bolts of size 6mm dia x 35mm length with nut and washer , ms studs bolts of size 6mm dia x 40mm length with nut and washer , ms studs bolts of size 6mm dia x 50mm length with nut and washer , ms studs bolts of size 10mm dia x 25mm length with nut and washer , ms studs bolts of size 10mm dia x 50mm length with nut and washer , ms studs bolts of size 10mm dia x 75mm length with nut and washer , ms studs bolts of size 12mm dia x 35mm length with nut and washer , ms studs bolts of size 12mm dia x 50mm length with nut and washer , ms studs bolts of size 12mm dia x 75mm length with nut and washer , ms studs bolts of size 12mm dia x 100mm length with nut and washer , ms studs bolts of size 16mm dia x 75mm length with nut and washer , ms studs bolts of size 16mm dia x 100mm length with nut and washer , ms studs bolts of size 16mm dia x 150mm length with nut and washer , pvc lid for 500 l water tank , ottoseal silicon sealant s70 310ml , mosaic tiles , solvent cement 100 ml tin , incandecent lamp 100w , distilled water for batteries , euroload type switch changeover front operated 160a 25 ka 4p on load , euroload type switch changeover front operated 200a2 5 ka 4p on load , euroload type switch changeover front operated 250a 35 ka 4p on load , euroload type switch changeover front operated 320a 35 ka 4p on load , euroload type switch changeover front operated 400a 50 ka 4p on load , euroload type switch changeover front operated 630a 50 ka 4p on load , tyre coupling s100 for pump and motor 12 no , arc welding rod 3 point 15mm x 450mm 100 nos , dead plug 80mm , ms studs bolts of size 6 point 5mm dia x 75mm length with nut and washer , ms studs bolts of size 5mm dia x 100mm length with nut and washer , ms studs bolts of size 6 point 5 mm dia x 100mm length with nut and washer , ms studs bolts of size 5mm dia x 75mm length with nut and washer , ms studs bolts of size 8 point 5 mm dia x 150mm length with nut and washer , float valve 25mm , float valve 40mm , float valve 50mm , pop up sprinklers 8504 to flow 10 -15 mtr radious suitable for 25mm dia , sliding bolt cp 250 mm long , sliding bolt cp 300 mm long , aluminum sheet 0 point 50mm thick 1220x2440mm , m-se

Rail Welding Machine Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Corporations/Associations/Others

Central Government/Public Sector

State Government

State Government

State Government

State Government

Central Government/Public Sector