Latest rail welding Tenders | Government rail welding Tenders

CTN :40955702

12 Jul, 2025 7.22 Lacs

Multi City - Karnataka

Tender For tender inviting for material supply to adhihalli village sanjivini shed - tools and plants 2 %onmaterial adhi060, hom of cutting and grinding machine adhi059, mechanic class ii/mechanic hmp grade i/eme grade adhi058, add adhi057, hom of welding and grinding machine adhi056, corbon electrodes adhi055, rms gusset plate adhi054, ms pipes of 80 mm to 100 mm diaadhi053, polyethylene water storage tank with cover and suitable locking arrangemnet adhi052, add brush, putty, sand paper at 2% on cost of paint adhi051, water proofing cement paint adhi050, add brush, putty, glue at 5% on cost of paint adhi049, whitening adhi048, dry distemper adhi047, unit cost as per the specification adhi046, add hom of welding and grinding machine 2% on material adhi045, fabricator adhi044, a 5.50 mm thick plain glass adhi043, chrominum plated screws adhi042, cleat angles adhi041, alluminium handles - 15 mm adhi040, alluminium tower bolt - 20 cm adhi039, pvc beading adhi038, rubber beading for shutters beading adhi037, nylon rollers adhi036, powder coated 60-70 micron adhi035, enamel metal paint adhi034, painter class i adhi033, ready mix primer paint (ready mix red lead paint) adhi032, add hom of welding and grinding machine 4% on material adhi031, welder grade i adhi030, fitter class i adhi029, ms flat adhi028, m.s rods adhi027, vitrified tiles 600x600 mm adhi026, add providing and removing scaffolding at 3% on labour adhi025, solid concrete blocks (40 x 20 x 20 cms)-4.00 n/sqmm adhi024, add watering charges at 1 % on labour adhi023, add handling , loading and unloading at 1% on material adhi022, casurina poles 100 - 150 mm adhi021, stone chistler class ii adhi020, mason class ii (with tools) adhi019, mason class i (with tools) adhi018, mixer (concrete small used in culvert) adhi017, boulders adhi016, bond stone 20 x 20 x 45 cm adhi015, size stone 20 x 20 x 25 cms adhi014, binding wire adhi013, tmt bars fe 500 adhi012, formwork, centering & scaffolding for beams & lintels of building adhi011, formwork, centering & scaffolding for columns & piers adhi010, hom of vibrator 0.71 days adhi009, plasticizer / super plasticizer adhi008, add watering charges at 1 % on material adhi007, mixer (concrete) - 1 cum capacity adhi006, portland cement adhi005, coarse sand (zone iii) adhi004, broken stone aggregate 12 mm to 10 mm size adhi003, broken stone aggregate 20 mm size adhi002, broken stone aggregate 40 mm size adhi001

CTN :40936332

14 Jul, 2025 53.72 Lacs

Berhampur - Odisha

Tender For supplying all labour, material and t&p for laying of pipe lines, supplying & fiting of sluice valves, construction of valve chamber, providing fhtc in connection with pws to tumbagada, andanda & sapuakhata under patrapur block. - annexure - a, laying of pipe lines, fiting of sluice valves construction of valve chamber providing fhtc in connection with pws to tumbagada, supplying all labour and t&p for earth work in all kinds of soil within 50 m initial lead and 1.5 m initial lift including rough dressing and leveling etc., in foundation and plinth as per direction of engineer in-charge., supplying all material, labour , t&p for laying of following od hdpepipes conforming to is 4984-2016 and specials of the following outside diameter and class-4 to class-5 and jointing by fusion welding method including testing etc. all complete as per direction of engineer-in-charge, 160mm dia o.d. hdpe. pipe (including pipe cost) pe100, pn-06, 110mm dia o.d. hdpe. pipe (including pipe cost) pe100, pn-06, 90mm dia o.d. hdpe. pipe (including pipe cost) pe100, pn-06, supplying all labour, t&p for filling in pipe line trenches with excavated materials including watering etc., all complete including proper care to the laid pipe lines to prevent damages of pipes and specials as per the direction of engineer-in-charge., supplying all labour, materials, and t&p for drilling perfectly horizontal bore of required dia so as to accommodate following size hdpe. pipe line into the hole including inserting the pipe with out disrupting the traffic or cutting road including jointing with water main pipe lines etc, (excluding cost of pvc pipe) and as per the direction of engineer-in-charge, 160 mm dia hdpe pipe, supplying all labour and t&p for cutting cement concrete road for taking pipe line etc., complete and as per direction of engineer-in-charge., supplying all materials, labour t&p for making good to the damages of cutting of cement concrete road for taking pipe line and with 40 mm size crusher broken metal concrete etc., cc (1:4:8) of thickness 0.10 mtr and top 12 mm size crusher broken chip;s concrete cc(1:2:4) of thickness 0.075 mtrs including all cost, conveyance, royality of materials including watering, curing and ramming etc., all complete and as per specification and direction of engineer-in-charge, supplying all materials, labour and t&p for fixing of following sizes of c.i. sluice / non return valves with double flanged ends for water works purpose for following nominal diameter including cost of nuts and bolts, rubber insertion as per specification etc., complete., 150 mm dia c.i s.v, 150 mm dia c.i n.r.v, 100 mm dia c.i s.v, 80 mm dia c.i s.v, supplying all materials, labour and t&p for fixing of 15mm to 25 mm dia single air valve including fitting of required pvc service saddle for water works purpose for following diameter, including drilling the water main as per specification etc., complete., supplying all materials, labour, t&p for construction of brick masonry sluice valve and non return valve chambers of internal size 90x90x120cm with all lead royalty etc. such as earth work excavation, bed concrete with c.c. (1:4:8), kb brick in c.m. (1:6), 12mm cement plaster with c.m. (1:4), rcc cover slab with cc 1:2:4 etc., and as per approved p.h. drawing and design etc., complete and direction of engineer-in-charge., supplying all materials, labour and t&p for fabricating, fitting and fixing with specials at the required site using hot dip galvanized pipes of medium class and standard weight of reputed make (tata / zindal make) confirming to is 1239(p.1)2004/is:1161 of the following dia including cutting the pipes and flanges drilling the bolt holes matching the pipes flanges and jointing with proper gradient and alignment, welding with using electrodes, fitting, fixing using mobile diesel generator set etc., complete as per direction of engineer-in-charge to be used to cross drainage work incl

CTN :40940965

09 Jul, 2025 2.15 Lacs

Aurangabad-Mh - Maharashtra

Tender For repair of various items at ambikanagar library ward 82 - removing the existing cernent plaster of any thickness without causing dust nuisance and stacking the debris upto a distance of 50 metres or spreading in the compound and cleaning the site etc.complete.note: following items to be executed after prior approval of superintending engineer., providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete., removing doors and windows with frames and stacking the materials as directed with all leads, lifts etc. complete., providing and fixing mild steel grill work for windows, ventilators etc. 20 kg/sqm as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete., providing and fixing solid core flush door shutter in single leaf 32 mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on bothsides, and finishing with french polish etc. complete., providing and fixing in position. (as per 1.5 * 0.1868 / 1982 ) aluminium sliding window of two tracks with rectangular pipe having overall dimension 63.5 * 38.1 * 1.02 mm at weight 0.547 kg/rmt. and window frame bottom track section 61.85 * 31.75 * 1.2r at weight 0.695 kg/rmt. top and side track section 51.85 * 31.75 * 1.3 mm at weight 0.659 kg/rmt. the shutter should be of bearing bottom 40 * 18 * 1.25 mm at weight 0.417 kg/rmt. inter locking section 40 * 18 * 1.1 mm at weight 0.469 kg/rmt. and handle section 40 * 18 * 1.25 mm at weight 0.417 kg/rmt. and top section 40 * 18 * 1.25 mm at weight 0.417 kg/rmt. as per detailed drawings and as directed by engineer in charge with all necessary aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass with all required screws and nuts etc, complete. with colour anodising with box., providing and applying two coats of synthetic enamel paint of approved colour to new /old structural steel work and wood work in buildings, including scaffolding if necessary, cleaning and preparing the surface (excluding primer coat) etc. complete., dismantling the r.c.c. work 1:2:4 and sorting out the materials such as steel etc. as directed and stacking them within the specified lead as directed etc. complete., providing and laying cast in situ/ready mix cement concrete m-20 of trap/granite/quartzite/gneiss metal for r.c.c. beams and lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (excluding reinforcement and structural steel). with fully automatic micro processor based plc with scada enabled reversible drum type mixer/concrete batch mix plant (pan mixer) etc. complete. with natural sand/v.s.i. quality artificial sand, providing and fixing in position tmt - fe-500 bar reinforcement of various diameters for r.c.c. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete., providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand face

CTN :40665526

07 Jul, 2025 NA

Poonch - Jammu And Kashmir

Tender For corrigendum : supply of paint remover inflammable , plywood , sr-998 , foam sheet , leather cloth black , paint olive green , sheet lead , welding rod , cable elect , ms sheet cold iron , sheet cellular 37mm , emery paper , jointing sheet , wire copper general purpose

CTN :40491562

07 Jul, 2025 NA

Delhi - Delhi

Tender For bid to ras supply of welding glass white size 4 inch , welding glass black size 4 inch , welding lead or cable e 35sqmm h.o.r.f.hr 90 600 amp , welding electrode holder , 10 mm single core electrical copper wire black colour length 15 mtr , 10 mm single core electrical copper wire red colour length 15 mtr , ring terminal crimp m4 10 mm2 , heavy duty crocodile clip with red and black colour marking jaw c type , welding gloves leather , electrical copper wire 8 mm single core , electrical copper wire 10 mm single core , 10 mm single core electrical copper wire black colour , 10 mm single core electrical copper wire red colour , hydrometer gravity tester , da gas regulator , oxygen gas regulator , automatic welding helmet , welding rod 3.15mm ms , welding rod ms 08 no , welding rod ss 3.15 mm , cutting rod 3.15 mm , cutting rod 08 no , armoured welding rod 3.15 mm , cast iron welding rod 3.15mm , brazing rod 2.0 mm , bronze flux , portable welding holder small size , portable welding cable 12 mm , portable welding male adaptor bid number/ & ( * ) : gem/2025/b/6278135 dated/ + : 27-05-2025 bid document/ 2 2 1 / 26

CTN :40921786

12 Jul, 2025 NA

Visakhapatnam - Andhra Pradesh

Tender For custom bid for services - so for miscellaneous machining services-1 machining of exchg-channel upto 500 mm, 2 machining of exchg- channel cover - 501 , 3 machining of exchg- channel cover 1001 m, 4 machining of exchg upto 500 mm dia, 5 machining of exchg 501 mm to 1000 mm dia, 6 machining of exchg 1001 mm to 1500 mm di, 7 machining of exchg tube sheet along with, 8 machining of exchg tube sheet along with, 9 machining of exchg gasket face 1001 mm t, 10 machining of gasket seating slots (10 mm, 11 rolling services of plate into pipe, 12 bending of patch plate for welding jobs, 13 services: bending of exchanger cs tubes , 14 repairing services of bent column trays, 15 bending of alloy steel pipes up-to size:, 16 bending of cs pipes upto 4 inch x sch 80, 17 bending of boiler tubes upto 38.1mm x 60, 18 marking, drilling and fabrication of exc, 19 marking, drilling and fabrication of exc, 20 machining: turning on lathe, 21 machining services charges, 22 machining/shaping of anodes to size, 23 repair of damaged threads to studs & nut, 24 removal of broken bolts from holes, 25 machining: threading of holes with tappi, 26 machining of rtj groove on flanges, 27 services, demister cage resizing, 28 services, gasket face serration, 29 services, hexamesh rolling, 30 services, threading of pipes upto 1 1/2, 31 services, threading of pipes 2 inch and, 32 services: sectional/full replacement of , 33 fab and supply heater spigot pipe caps, 34 fabrication of exchanger tie rods, 35 fabrication of foundation bolts, 36 fab of exchanger fish plates / connectin, 37 fabrication of exchanger backing ring, 38 fab and supply of cs plug for od: 20/25 , 39 fab and supply of cs plug for od: 38.1 m, 40 fab and supply of cs taper plug for od:, 41 fab and supply brass taper plug for od: , 42 fab and supply of brass plug for od: 20/, 43 fab and supply ss plugs for tubes up to, 44 fab and supply ss plugs for tubes from 3, 45 fab and supply of ss 410 plug for od: 20, 46 fab and supply of as plug for od: 20/25, 47 fab and supply as plugs for tubes of 25, 48 fab and supply as plugs for tubes of 38, 49 fab and supply of ss 316 plugs for tubes, 50 fab and supply of ss 316 taper plug for , 51 fab and supply of duplex steel plugs od, 52 fab and supply of ss 310 plug for od:50 , 53 fab and supply of cs afc plugs, 54 fab and supply of 5 mm thk cs handles fo, 55 fab and supply of 10 mm thk. cs handles , 56 fabrication and supply of cs valve wheel, 57 fab and supply of ss 316 orifice plate o, 58 fab and supply of ss 316 orifice plate o, 59 fab and supply of ss 316 orifice plate o, 60 fab and supply of ss 316 orifice plate o, 61 fab and supply of brass ferrules for od-, 62 fab and supply of pvc ferrules for od- 2, 63 fab and supply of carbon steel ferrules , 64 fab and supply of foundation bolts size:, 65 eye bolt plugs for salt water exchangers, 66 fab and supply of 1/4 in flaring type br, 67 fab and supply of flaring type brass tee, 68 fan and supply of ss clamp of size m6/ m, 69 fab and supply of cs bush for the valves, 70 fab and supply of brass/bronze bush for , 71 fabrication and supply of ss poking rods, 72 fab and supply of lead washers for burne, 73 fab and supply copper ring gasket for he, 74 fabrication of ss f rods, 75 fab and supply of gauge glass body segme, 76 fab supply of deluge valve ss ball che, 77 fab and supply of cs exchanger backing r, 78 fab and supply of ss exchanger backing r, 79 fab and supply of cs strainer - up-to 2 , 80 fab and supply of cs strainer - for 3 to, 81 fab and supply of cs strainer - for 6 to, 82 fab and supply of cs strainer - for 10 t, 83 fab and supply of cs strainer for above , 84 fab and supply of ss 304 strainer for up, 85 fab and supply of ss 304 strainer for 3 , 86 fab and supply of ss 304 strainer for 6 , 87 fab and supply of ss 304 strainer for 10, 88 fab and supply of ss 304 strainer for ab, 89 reconditioning of strainer with mesh upt, 90 reconditioning of strainer with mesh abo, 91 fab and supply of strainer with p

corporations/Associations/Others

CTN :40933766

15 Jul, 2025 NA

Mysore - Karnataka

Tender For auction sale of ms scrap of condemned /damanged bh40 equipment items,m s melting scrap,m s turning boring scrap,c i boring m s turning boring,scrap of c.i boring/m.s. turning & boring(mixed with mud),scrap of rubber items,scrap of m.s. flame cutting slag,hoop of iron baleputty scrap,scrap of cond/obsolete/used/rej field returned/damaged radiators & oil coolers,scrap of cond/un-serviceable/rej/obsolete operator seats of various eqpt models,scrap of cond/obsolete/used/rej/damaged/wornout eqpt /project tyres,m s scrap of miscellaneous items consisting of waste formed plates,scrap of used welding coil spools,scrap of used cond rejd and unserviceable voltas diesel forklift,scrap of used cond rej and unserviceable godrej diesel forklift,scrap of used, cond, rejd and unserviceable voltas diesel forklift,scrap of cond/damaged/used/unserviceable/rej air compressor,scrap of cond /damaged/rejected/unserviceable conventional,scrap of protective covers guards,scrap of used, rej, cond, damaged and worn-out grinding wheels,scrap of cond field returned bearings associated with/without gear assemblies,scrap of used cond damaged rej unserviceable steel wire ropes and chain links,scrap of used cond rej and unserviceable lead acid batteries dry batteries,scrap of electrical items,scrap of cond/ damaged/rejected production equipment parts,m s scrap of used discarded engine,scrapped cabins,m s scrap of used rejected cond fabricated items,scrap of cond damaged used or rejected un-serviceable field returned items,scrap of old dead wood,scrap of used oil,scrap of used empty plastic oil barrels,scrap of used empty ms grease barrels

Central Government And Public Sector

CTN :39319483

05 Jul, 2025 9.81 Lacs

Udhampur - Jammu And Kashmir

Tender For bid to ras tender for supply of stainless steel welding electrode e 309 mo-15 2.5 mm , stainless steel welding electrode e 309 mo-15 3.15 mm , welding electrode ms (e-7018) low hydrogen , size 2.50mm x 350mm , welding electrode ms (e-7018) low hydrogen , size 3.15mm x 450mm , welding electrode ms (e-7018) low hydrogen , size 4.00mm x 450mm , welding electrode ms (e-6013) general purpose , size 3.15mm x 350mm , welding electrode ms (e-6013) general purpose , size 2.5mm x 350mm , welding glass black 105x80 , welding hand gloves leather , welding helmet , welding holder 600 amp , welding lead copper core 600 amp , portable electrode drying oven temp-50-300 , cap-5kg , grinding wheel (ag4) dia 100 mm , grinding wheel 180 mm , cutting wheel (ag4) 100 mm , cutting wheel , 180x2.8x22.23 mm , buffing wheel (ag4) 4 inch , flash back arrestor for oxyzen gas , flash back arrestor for acelylen gas , cutting nozzle 1/16 (suiitable for oxy acetylene gas cutting set) , cutting nozzle 3/64 (suiitable for oxy acetylene gas cutting set) , gas hose pipe clamp flexible 9-12 mm , gas regulator for da , oxygen gas regulator , emery paper fine , search light led 15w rechargeble , rain suit (three piece) pant shirt and cap , umbrella , rubber gumboot size 7 , rubber gumboot size 8 , rubber water hose pipe 1 inch (25mm) , poly propylene rope 20mm diameter (in meter) , poly propylene rope 16mm , nylone rope-12mm (in meter) , safety belt full body harness , d shackles capacity 3.2 ton , d shackles capacity 5 ton , d shackles capacity 10 ton , d shackles capacity 16 ton , steel wire rope sling with both end loop- 16mm dia. x 03 mtrs length , wire rope slings dia 23 mm x 3 mtr. capacity - 10t , steel wire rope sling with 600 mm loops at both end 25 mm dia x 6 mtrs long 6x19 const fiber core , double ply polyester webbing slings load capacity 10 tonne , polyester webbing sling of 5 mt capacity with both end eye and 05 mtr length , 4mm cutting rod , chipping hammer , welders jacket leather , welding wire brush , oxygen gas pipe , d. a gas pipe , grease nipple , pin type 5/8 , grease nipple , button type bsw 5/8 , paint brush 4 inch , steel wire rope sling size 28 x 5mtr long , wire rope sling 32mm x2.2mtr

Co-operative

CTN :40925917

16 Jul, 2025 NA

Udhamsign Nagar - Uttarakhand

Tender For supply of vacuum filter spares & repairs - s.s.screen 8,2" long wide 13" containing 625 holes per sq.inch selam sheet, weight of screen 1.5 kg.( 3%), brass zig zag 2 long, brass divisional strip - size 16" long 22 mm wide wt.2.800 kg per strip approx., s.s.divisional strip (one set of 24 piece x8), decking strip- size 8 x 1" gauge 21, wt. 4.5 kg per strip approx., nipple for s.s.tube of vac.filter, gun metal tunion pate of vac.filter, s.s.screw round head/ key head, lubricating pump 8 point, s.s.binding strip width 20 mm x 2 long, lead soft, brass/ ss nozzle with socket (monark) k type size 1/4" bsp thread, only socket for above, spring for high flow valve, high flow valve for 8x16 vac.filter, brass solid strip, s.s.solid strip 8 long, spring loaded self setting scrapper complete, worm & worm wheel (worm gear ) complete suitable for rotory vaccum filter 8x16, 79 teeth, od 800 mm, i)tunning shaft for vaccum filter, ii)fitting of above tunning shaft at our mill site, s.s. stud with nut 12 x 50 mm, 10 x 65 mm, supply of worm shaft for vaccum filter reduction gear bax, s.s. internal pipe line ss-304 size 1/2" & 3/4" x 16 swg, s.s. 5 way junction box (fabricated) ss 304, s.s. nipple 3/8" bsp, copper rivit all sizes, s.s. pipe for vaccum juice size 3/4" as per sample, rubber cone viton coloured wilcox quality for gauge glass size 3/4" (silicon superior quality), junction box (ss sheet) from 3 mm thick plate heavy duty, ss nipple for decking plate (as per sample), ss electrode (no.12) 2.5 mm thick, ss pipe 1.5 mm thick, size " 7 , ss pipe 1.5 mm thick, size " 10 , araldite 1.800 kg set, repair work of vacuum filter, after dismantling of decking of ss screens of vacuum filter no. 1 & 2 cleaing of decking plates, conducting hydraulic testing of five way fitting connection and giving satisfactory leaky proof trails of some and thereafter refitting of all the dismantling ss screens complete in all respect., repair serviceable of 8 point lubrication of vacuum filter (including list of all un serviceable parts), fitting of new damaged five way fittings (complete with welding etc.) of vacuum filter no. 1 & 2 and thereafter conducting satisfactory leak proof trials (5 way fitting), replacement of damaged decking plate nipple of vacuum filter no. 1 & 2 and welding with five way fitting thereafter conducting satisfactory leak proof trails., chief engineer

Corporations And Associations And Others

CTN :40927343

09 Jul, 2025 NA

Palwal - Haryana

Tender For tender for purchase of various type hardware and miscellaneous items - emery cloth rough make- carborendum or equivalent, emery cloth fine make- carborendum or equivalent, emery tape rough, width- 2 , make- carborendum, emery tape fine, width- 2 , make- carborendum, valve lapping compound silicon carbide (rough) cane 400 gm each ( emery paste ) make-carborendum, graphite powder, make- carborendum or equivalent, blue paste tube. make- atlas, araldite (90 gram each set). make- pidilite, rustoline (500 ml each) make- pidilite, hacksaw blade x h.s.s, make-mirinda/l&t/tapria, teflon tap roll, x12 mtrs. make- champion, holdite (hawco,pidilite) 500 gram each, bearing retainer anabond-412, m-seal rasin base and hardner, make-pidilite/ anabond, rubber hose pipe wire braided 1 , make-dunlop/indomakson/uroflex, gi hose clamp make- klipwell, gi hose clamp 1 make- klipwell, premium dura welding hose pipe, size-8 mm brusting pressure 50 kg/cm2, colour- red, make-essab, welding cable (lead) 600 amp, 2200 copper wire, make- essab, brass nozzle for l.p gas size 1/16 make- asha, sunshine., brass nozzle for l.p gas, size 3/64 make- asha, sunshine, welding holder 600 amp, make- essab, welding hand gloves. make- essab, welding hand screen make- essab, black welding glass, make- germany, welding goggales . best quality, plain goggle. best quality, oxygen gas regulator make: essab, lp gas regulator make: essab, gi hose clamp 12 mm . make- klipwell, cotton waste.best quality, old dhoti (full long ), m.s. short bend c class size 1/2 thick- 4 mm 3d, m.s. short bend c class size 3/4 thick- 4 mm 3d, m.s. short bend c class size 1 thick- 4 mm 3d, m.s. short bend c class size 2 thick- 4 mm 3d, m.s. short bend c class size 2-1/2 thick- 4 mm 3d, m.s. short bend c class size 3 thick- 4 mm 3d, m.s. short bend c class size 4 thick-5 mm 3d, m.s. short bend c class size 6 thick-5 mm 3d, m.s. short bend c class size 8 thick-6 mm 2d, m.s. short bend c class size 10 thick-6 mm 2d, m.s. long bend c class size 1/2 thick- 4 mm 3d, m.s. long bend c class size thick- 4 mm 3d, m.s. long bend c class size 1 thick- 4 mm 3d, m.s. long bend c class size 1-1/2 thick- 4 mm 3d, m.s. long bend c class size 2 thick- 4 mm 3d, m.s. long bend c class size 2-1/2 thick- 4 mm 3d, m.s. long bend c class size 3 thick-4 mm 3d, m.s. long bend c class size 4 thick-6.85 mm 3d, m.s. long bend c class size 5 thick-6.85 mm 3d, m.s. long bend c class size 6 thick-6.85 mm 3d, m.s. long bend c class size 8 thick-7.85 mm 2d, m.s. long bend c class size 10 thick-7.85 mm 2d, m.s. long bend c class size 12 thick-7.85 mm 2d, m.s. flange table d size -3/4 , m.s. flange table d size -1 , m.s. flange table d size -1-1/2 , m.s. flange table d size -2 , m.s. flange table d size -3 , m.s. flange table d size -4 , m.s. flange table d size -5 , m.s. flange table d size -6 , m.s. flange table d size -8 , m.s. flange table d size -10 , m.s. flange table d size -12 , roll guard grease (ptpe rain force energy saver), c s socket welded gate valve class-800 size 25 mm make:ksb/leader/uniklinger, c s socket welded gate valve class-800 size 40 mm make:ksb/leader/uniklinger, c s glove valve class-800 size -25 mm make:ksb/leader, seamless long band schedule -80 size 20 mm make: msl/jsl 3d, seamless long band schedule -80 size 25 mm make: msl/jsl 3d, seamless long band schedule -80 size 40 mm make: msl/jsl 3d, seamless long band schedule -80 size 80 mm make: msl/jsl 3d, seamless long band schedule -80 size 65 mm make: msl/jsl 3d, seamless long band schedule -80 size 150 mm make: msl/jsl 3d, seamless long band schedule -80 size 200 mm make: msl/jsl 3d

Rail Welding Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

Central Government And Public Sector

Co-operative

Corporations And Associations And Others