Latest railing work Tenders | Government railing work Tenders

State Government

CTN :45275642

02 Jun, 2026 3.07 Lacs

Serampore - West Bengal

Tender For repairing and overhauling of one no twin lobe air blower assembly and renovation of 2 nos outgoing motor (blower ) feeder of lt pdb with supply, fitting and fixing spares at sludge pump house under swtp, kmda. - supply,installation,testing and commisioning of following items for hoisting system/ blower and gear box as mentioned below as per direction including cost of materials, machinaries , manpower, cutting,machining,aligning,anchoring,welding,finishing,consumables, carriage and all overheads with all leads and lifts complete as per specification (without painting), i) base frame (ms), ii) shaft/pin with key ways made of ss-304, iii) gear& pinion (forged steel), supply and fixing the 3way c.i v grooved pulley with complete mechanism key way suitable to en-24, 60 mm dia/ as per sample of shaft end., a) motor driving, b) blower driving, supply of gear oil as per direction of engineer in charge., supply of grease, supply and delivery of the following bearing (make: skf):, i) 22312e/c3/ as per sample. (for blower), supply and fixing of tough v belts (make: fenner/power boom / v guard/benq/ecodrive) of the following size c 98/ as per sample., supply fitting fixing of ss (aisi304) bolts,nut & washer i) dia 10 mm to 20 mm a) length upto 75 mm, refixing of impeller of blower after dynamic balancing in workshop as per is rule after dismantling the same., dismantling the 25/30 h.p (18.5 kw)//30 h.p squirrel cage motor from its foundation by opening mounting bolts and disconnection of cables from terminal box and open the v belts for repairing purpose (in condition), preliminary checking of the whole motor (lt sq. cage im) and testing of i.r. value, load currents, leakage factor of stator & rotor, terminal lead joints of stator connection ends, insulation of glass fibre terminal bar, double cage rotor end rings and all of motor bars and bar joints, housing of d.e. & nde shield bearing housing etc. before work to detect fault., complete servicing and heat varnishing of 415volt, 3 phase l.t. sq. cage induction motor after cleaning the stator and heating it up periodically and varnishing by dr. beck s graded insulating varnish to obtain stable ir value, cleaning up the rotor, including heating for demoisturisation, lacker coating on the surface of rotor stampings, cleaning and ro priming on the end shield covers, bearing housing and complete the necessary repairing works as per direction of e.i.c.upto 75kw lt sq. cage im ], re fixing the 25/30h.p star/delta squirrel cage motor over its foundation by mean of mounting bolts & nuts, washer complete connection of existing led of cable at the terminal box and wear the v belts with proper alignment in respect to i.d. fan (12000 cu m/hr capacity)/ blower by adjusting the side rail for smooth running., finishing the end of terminal leads by s & f dowells copper sockets properly supplying tapes, petrollium jelly etc. 6 nos.upto 75kw lt sq. cage im., cost of mechanical work viz. shaft truness, checking key way looping of holes grinding and polishing etc. upto 75kw lt sq. cage im., inspection checking/testing and servicing of the existing starter panel, all terminal connection, contactors, relays etc as per desired technical specification including man and minor materials for proper functioning as per direction of eic., supply and fixing of 240/230 volt, 50 hz, t.p., power contactor (make: l & /abb/schneider/ simence/ ge) having contact block of the following range.32-55amp, supply & fixing of 230/240v, led indicating lamp make :ae/kappa/imp) blue/ white color., supply & fixing of 230/240v, led indicating lamp make :ae/kappa/imp) other than blue/ white color., supply and delivery of thermal overload relays (make: l & t/abb/schneider/simence/ ge/minilec) of the following range:a) 0.2-0.33/ 0.3-0,5/ 0.45-0.75, mn2, supply of ammeter selector switch current in each phase with off, 4 pos. 90 angle ofthrow (off-r-y-b) , supply and fixing of analog ammeter ranging

State Government

CTN :45309777

05 Jun, 2026 7.24 Lacs

Ajmer - Rajasthan

Tender For various repair and mtc work in ncc office building at ajmer (addl. work tiles and railing work)

State Government

CTN :45007424

26 May, 2026 1.49 Crore

East Nimar - Madhya Pradesh

Tender For corrigendum : complete overhauling of electrical wire rope hoist along with supply of spares for electrical wire rope hoist installed at coal mill area at 2x600 mw, stage-i, sstpp, mppgcl, dongalia. - scope of service, complete supervision & installation of new spares/replacement of damaged/eroded spares of all 08 numbers of hoist (04 numbers capacity-20 ton & 4 numbers of capacity-15ton)., scope of supply, spares for 20 ton hoist, brake motor 15hpx1000rpm, 40% cdf, 150st/hr, s4 duty, foot mounted sq cage f/s 160 l, terminal box required right side for 15t or 20t hoist make : siemens, brake motor 1.5hpx1000rpm, 40% cdf, 150st/hr, s4 duty, flange mounted sq cage f/s 90 s for ct<, terminal box required top side make : siemens, gear box with coupling for trolley, mdl: ibc162/25.9/200-24 make: premium, gear box with coupling for trolley, mdl: ibc162/18.9/200-24 make: premium, rotary limit switch make: soc, two way lever type limit switch, make: soc, disc brake for 15hp motor, make: - emco, type 14.458, size: - 20, disc brake for 1.5hp motor, make: - emco, type 14.458, size: - 12, cable trolleys medium duty, wheel dia min 40 mm., wire rope 20 mm / 6x36 steel core/ galvanized, make- ushamartin, push buttons with 12 meter cable, rectifier size- eh720hhd, long travel dsl system, i- chain (5 mm)-, ii- cable 6 mm epr, iii- fasteners (1/4x2 ), lt motor shaft, lt motor pinion, spares list of 15-ton hoist, brake motor 15hpx1000rpm, 40% cdf, 150st/hr, s4,duty, foot mounted sq cage f/s 160 l, terminal box required right side for 15t or 20t hoist make : siemens, brake motor 1.5hpx1000rpm, 40% cdf, 150st/hr, s4 duty, flange mounted sq cage f/s 90 s for ct, terminal box required top side make : siemens, gear box with coupling for trolley, mdl: ibc162/25.9/200-24 make: premium, gear box with coupling for trolley, mdl: ibc162/18.9/200-24 make: premium, rotary limit switch make: soc, two way lever type limit switch, make: soc, disc brake for 15hp motor, make: - emco, type 14.458, size: - 18, disc brake for 1.5hp motor, make: - emco, type 14.458, size: - 12, cable trolleys medium duty, wheel dia min 40 mm., wire rope 15 mm / 6x36 steel core/ galvanized, make- ushamartin, pendent push buttons, rectifier size- eh720hhd, long travel dsl system, chain (5 mm)-, cable 6 mm epr, fasteners (1/4x2 ), lt motor shaft, lt motor pinion

State Government

CTN :44927486

10 Jun, 2026 1.51 Crore

East Nimar - Madhya Pradesh

Tender For corrigendum : procurement of spare parts of ring granulator of l and t make for chp-i, 2x600mw, sstpp, mppgcl, dongalia. - suspension bar, moc- astm-a322 grade aisi 4140 suspension arm (01 set. = 25 nos. for one no. rg), moc-astm-a108/aisi 1045 end disc drive side, moc- astm-a108/aisi 1045 end disc non side, moc- astm-a108/aisi 1045 cage frame (without screen plates & adjusting mechanism), moc-is:2062 breaker plate, 1set=2nos for 1no rg with fixing bolts, moc-mn steel is:276, gr.iii 45mm thk. upper screen plate, 1set=2nos for 1no rg with fixing bolts, moc-mn steel is:276, gr.iii 45mm thk. lower screen plate, 1set=2nos for 1no rg with fixing bolts, moc-mn steel is:276, gr.iii 45mm thk. kick off plate, 1set=2nos for no rg with fixing bolts, moc-mn steel is:276, gr.iii 40mm thk.

State Government

CTN :44996096

28 May, 2026 10.89 Lacs

Tiruvallur - Tamil Nadu

Tender For corrigendum : supply of pillow block housing saf 234 for skf 22234 c material castiron is 210 fg 200 type non expansion , spherical roller bearing cylindrical bore metric sizes steel cage size 22234 w 33 with c3 clearance , sn 518 plummer block suitable for skf 22218 ck bearing with non expantion rings , spherical roller bearing taper bore with steel cage bearing no. skf 22218 ck

State Government

CTN :44991198

28 May, 2026 16.09 Lacs

Tiruvallur - Tamil Nadu

Tender For corrigendum : supply of taper roller bearing metric size steel cage skf 30324 - item 10 , taper roller bearing metric size steel cage skf 30330 - item 20 , taper roller bearing metric size steel cage skf 30240 - item 30

Central Government And Public Sector

CTN :45265068

28 May, 2026 NA

Multi City - Maharashtra

Tender For auction sale of others - total approx. wt.-3 mt, description:- (1) u/s and scrap miscellaneous ferrous scrap i.e. damper, gear case, brake beam, axle shaft, air spring with rubber, steel material, compensating ring, panel filter, battery cage, approx. wt-2 mt, (2) scrap oil and grease barrel (ferrous), qty-25 nos, approx. wt.-500 kg, (3) scrap paint barrel (ferrous), qty-60 nos, approx. wt-300 kg, (4) scrap air filter inner and outer (small, medium and big) (ferrous), approx. wt.-200 kg

CTN :45258195

26 May, 2026 7.00 Lacs

Bikaner - Rajasthan

Tender For public park jasrasar me open gym nirman karya - cross fit big cage material : pre-galvanized mild steel material thickness : 3mm paint : all-weather double layer powder coated paint other features : sealed ball bearing, steel seats for long lasting life dimensions (lxwxh); 14x4x9

CTN :44988369

02 Jun, 2026 3.27 Lacs

Faizabad - Uttar Pradesh

Tender For corrigendum : veer abdool hamid nagar ward sekh safi kabirstan key cahbootra kota stone steel railing work

CTN :45221748

01 Jun, 2026 13.25 Lacs

Rajsamand - Rajasthan

Tender For installing railing work on divider in municipal area

Railing Work Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

State Government

State Government

State Government

State Government

Central Government And Public Sector