Latest railings Tenders | Government railings Tenders

CTN :45707583

11 Jul, 2026 NA

Ferozepur - Punjab

Tender For material and labour for construction of view cutting fence (2200 mtr) in ferozepur - site clearance complete all as specified and as directed. , excavating in trenches, not exceeding 1.5 m wide or not exceeding 10 sqm on plan and not exceeding 1.5 m in depth for foundation etc and getting out in soft/loose soil complete all as specified & directed., , excavating in post holes each n. exc. 0.5 cum and getting out in soft lloose soil, returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exc. 25 cm complete all as specified., , material and labour for providing cement concrete in foundations 1:4:8 type d2 (using 40mm graded stone aggregate) filling and mass concrete complete all as specified & directed, , material only for brick work with bricks class designation 75, old size, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and as directed., , material and labour for providing cement concrete 1:2:4 type b1 using 20mm graded aggregate as in copping including weathering, slightly rounded or chamfered angles and necessary formwork complete all as specified and as directed, , material only for rendering 15mm thick in cement mortar (1:6) on fair faces of brickwork or concrete surfaces, finished the surface even and smooth without using extra cement complete all as specified and as directed., , supply and fix rolled mild steel fe-410 (grade e-250a) angle or tee section as in post, cut to length and bend to shape as directed, fixed independetly without connecting plate etc, including provision of 05 to 06 nos gaps/outs/holes in each post for providing/laying ppgi sheet and one coat of red oxide zinc chrome primer after preparation of new steel surfaces complete all as specified and as directed., , supply and fix rolled mild steel fe-410-w (grade e-250) quality a framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work complete all as specified and as directed., , supply and fix of pre-painting galvalume sheets having pitch 190mm, depth 29mm and not less than 0.50mm thickness having tensile strength of 550 mpa (galvalume base-ppgl trapezoidal profile sheets) fixed with self tapping screws of size 75/100mm and aluminium washer of suitable size in view cutting complete all as specified and as directed.

CTN :45713509

06 Jul, 2026 NA

Ranchi - Jharkhand

Tender For engagement of contractor for old school building repair, bathroom repair, plastering, painting, construction of classroom front corridor, providing water purifier cum cooler, repair of school boundary wall, structural steel work in built up sections/ framed work in gratings, frames, guard bar, ladder, railings, brackets, gates etc. at girl’s high school, chakme along with installation of solar lights at chakme village block and construction of internal approach road from main gate to classroom corridor at rajkiya krit madhya vidyalaya, chakme etc.

Central Government/Public Sector

CTN :45719640

21 Jul, 2026 30.00 Lacs

Chakeri - Uttar Pradesh

Tender For repair/replacement galvalume sheets, ceiling and certain joinery related items in permanet and temporary bldgs of n-4, narendra ground and rama devi at afs chakeri , kanpur - taking down chowkats or frames not exceeding 1.5 sqm each but with shutters (without taking off shutters from the frame), and removing from site complete all as specified and directed., ditto all as per item no.01 above but exceeding 1.5 sqm but not exceeding 4sqm each., dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed., framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to fe.290.gde-e-165, s&f solid pvc door frame of size 50mmx 47 mm made out of 5 mm plain colour pvc sheet reinforced with ms square tube all as per specification and drawing., s&f factory made solid panel factory made solid pvc moulded door shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick moulded pvc sheet on the front face & 2mm plain colour pvc sheet on back face, supplying & fixing in frame at site as per specification & drawing, s&f pvc butt hinges medium weight, 100 mm long, complete all as specified and directed., s&f 150 mm size aluminum, anodised, barrel tower bolts of extruded section., s & f 125 mm long aluminum anodised bow handle fabricated type extruded section complete all as specified and directed., s&f 300mm size mild steel ordinary rat tail rod pattern springs including roller and roller plate complete., factory made single extruded wpc (wood polymer composite) solid door/ window/ ceosetory windows & other frames/ chowkhat of size 45 x 85 mm comprising of virgin pvc polymer of k value 58-60 (suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying pvc solvent cement and screwed with full body threaded star headed ss screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 n (face) & 1100 n (edge), minimum comp ressive strength of 58 n/mm2, modules of elasticity 900 n/mm2 and resistance to spread of flame of class a category with property of being termite/borer proof, water/ moisture proof and fire retardant note: for wpc solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made., factory made single extruded wpc (wood polymer composite) solid door/ window/ ceosetory windows & other frames/ chowkhat of size 50 x 125 mm for double shutter door comprising of virgin pvc polymer of k value 58-60 (suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying pvc solvent cement and screwed with full body threaded star headed ss screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 n (face) & 1100 n (edge), minimum comp ressive strength of 58 n/mm2, modules of elasticity 900 n/mm2 and resistance to spread of flame of class a category with property of being termite/borer proof, water/ moisture proof and fire retardant note: for wpc solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made., factory made single extruded wpc (wood polymer composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of k value 58-60 (s

CTN :45742836

07 Jul, 2026 16.82 Lacs

Multi City - Karnataka

Tender For replacing damaged bollard lights, replacing led bulbs of ornamental street lights and led colour tree focus lights, and providing painting and fixing railings to the seating area of the auditorium at brindavan garden, krs.

State Government

CTN :45684603

06 Jul, 2026 NA

Haringhata - West Bengal

Tender For rate quoted for mgnrega work various material under haringhata block - rate quoted for mgnrega work various material under haringhata block, 1 st picked class brick, 1 st class brick, 1st class brick bats ( size as direction of eic)., silver sand, fine sand, medium sand, course sand, portland cement, brick aggregrates (single size) 40 mm normal size., stone aggregrates (single size) 40 mm normal size. (without carriage), stone aggregrates (single size) 20 mm normal size.(without carriage), stone aggregrates (single size) 10 mm normal size.(without carriage), stone aggregrates (single size) 5.6 mm normal size.(without carriage), stone aggregrates 13.2 mm nominal size. (without carriage), stone aggregrates 11.2 mm nominal size. (without carriage), 22.4 mm machine made chips (without carriage)., jhama metal kiln burnt. ( size as direction of eic)., thermocol 12.5 mm thick., polythene sheet (150 gm per sqm), hire charges of concrete mixer 0.25 to 0.40 cum with hopper, hire charges of diesel road roller- 8 to 10 tonne, hire charge of shuttering plank(without prop )(25mm-30 mm), hire charge of shuttering plank(with prop )(25mm-30 mm), hire charge of shuttering plank( with prop (30mm 37 mm ), vibrator (needle type 40 mm), steel material- tor steel rods/hysd bars/tmt bars(sail/tata/rinl) (fe415/fe500/fe500d,conforms to is 1786), steel material- tor steel rods/hysd bars/tmt bars(jsw/jspl/shyam/srmb/ssl/bmasl/electro steel)(fe415/fe500/fe500d,conforms to is 1786), ms ornamental grill (above 10 kg/sq.m up to 16 kg/sq.m, nail, 1220. wire mesh (rabbit), glue, 3050. galvanised steel corrugated sheets, 1023. galvanised steel j or l hooks 8 mm dia, galvanised steel bolt & nuts 6 mm dia and 25 mm long round head with slots, g.i lime washere, bitumen washer, stainless steel bolts/ square bar and plates, unslaked lime, supply of first aid box including medicines (specified by pia) at site., display board(ibs), display board(ibs), g.i. wire, coconut rope, sal ballah (10 cm ), sal ballah ( 125 mm ), sal ballah (15 cm ), cement primer(interior), cement primer(exterior), primer( for wood), cement based dust putty, black japan paint, enamel paint for steel grill, synthetic enemel paint in black or chocolate shade., woodwork for door and window frame malayashia sal, panel shutters of door and window, as per design (each panel consisting of single plank without joint), including fitting and fixing the same in position butexcluding the cost of hinge and other fittings.(ii) 40mm thick shutters with 19mm thick panel of size 30 to 45 cm.(b) sishu, gamar, champ,badam,bhola, mogra, hallak., supplying, fitting & fixing factory made p.v.c. door frame of size 50 mmx47 mm with a wall thickness of 5 mm, made out of extruded 5 mm, pvc sheet miter, coloured orissa pattern w.c. pan 580x440 mm, vitreous china pedestal for wash basin, vitreous china foot rests 250x125x25 mm, ptmt - liquid soap container of 400 ml capacity, ptmt - towel rail (600 mm), ptmt - soap dish/holder 138x102x75 mm, fan hook, r.c.c. ventilator, vitrified floor tile 60x60 cm, turpentine oil, vitreous china flat back wash basin 450x300 mm, r.c.c. pipes np2 class 450 mm dia, r.c.c. pipes np2 class 300 mm dia, supplying, fitting & fixing 30 mm thick both side prelaminated factory made solid panel pvc door shutter consisting of outer frame made out of m.s. tubes of 19 gauge thickness and size 19 mmx19 mm for styles, top and bottom rails, m.s. frame shall have cost of steel primers of approved make, supplying, fitting and fixing m.s. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete(1:2:4) as per direction. (cost of concrete will be paid separately) (a) 40mm x 6mm, 250mm length, anodised aluminium butt hinges of approved quality manufactured from extruded section conforming to i.s. specification (i.s. 205/66) and fitted and fixed with cadmium plated screws: (vii) 100 x 75 x 4.0mm, anodised aluminium barrel / tower / socket

State Government

CTN :45696549

06 Jul, 2026 NA

Krishnanagar - West Bengal

Tender For selection of local market rate for various items of work forpreparation of scheme estimate for implementation ofmgnrega & vbgramg schemes. --thermocol 12.5 mm thick., polythene sheet (150 gm per sqm)150 microns (or 0.15 mm), hire charges of concrete mixer 0.25 to 0.40 cum with hopper, hire charges of diesel road roller- 8 to 10 tonne, hire charge of shuttering plank (without prop )(25mm-30 mm) including all fittings ., hire charge of shuttering plank(with prop )(25mm-30 mm) including all fittings ., hire charge of shuttering plank( with prop (30mm 37 mm ) including all fittings ., hire charges of vibrator (needle type 40 mm), ms ornamental grill (above 10 kg/sq.m up to 16 kg/sq.m, nail (size1" to 2.5"), 1220. wire mesh (rabbit), glue (fevicol), 3050. galvanised steel corrugated sheets, 1023. galvanised steel j or l hooks 8 mm dia, galvanised steel bolts 10 mm dia and 7 cm long with nuts, g.i lime washere, bitumen washer, stainless steel bolts/ square bar and plates(size 5mm to 10mm), unslaked lime, supply of first aid box including medicines (specified by pia) at site., display board(ibs)(specification- as per amc including fitting & fixing), display board(community)(specification- as per amc including fitting & fixing), g.i. wire(weight 100 mtrs/. kg), coconut rope, sal ballah (10 cm ), sal ballah ( 125 mm ), sal ballah (15 cm ), cement primer(interior) normal, cement primer(exterior)water proof, primer( for wood), cement based dust putty, black japan paint, enamel paint for steel grill, synthetic enemel paint in black or chocolate shade., other local wood, supplying, fitting & fixing factory made p.v.c. door frame of size 50 mmx47 mm with a wall thickness of 5 mm, made out of extruded 5 mm, pvc sheet miter, coloured orissa pattern w.c. pan 580x440 mm, vitreous china foot rests 250x125x25 mm, ptmt - towel rail (600 mm), fan hook, r.c.c. ventilator, vitrified floor tile 60x60 cm, turpentine oil, hydraulic door closer tuular type aluminium section body, anodiesd aluminium hanging type door stopper, vitreous china flat back wash basin 450x300 mm, r.c.c. pipes np2 class 450 mm dia, r.c.c. pipes np2 class 300 mm dia, red lead primer for steel grill, interior premium imulsion(plastic paint), exterior imulsion weather coat paint, distemper paint, supply of upvc pipes (b type) (for soil pipe purpose) & fittings conforming to is-13592-1992 (a) (i) single socketed 3 meter length (c) 160 mm, (ii) plain tee for soil pipe purpose. (c) 160 mm, v) plain y for soil pipe purpose. (c) 160 mm, supplying, fitting & fixing upvc down pipes a- type and fittings conforming tois:13592-1992 with all necessary clamps nails, including making holes inwalls, floor etc. cutting trenches in any soil through masonry concretestructures etc if necessary and mending good damages including joining withjointing materails (spun yarn, valamoid/bitumen/m-seal etc) complete. a) upvc pipes: (ii) 110 mm. dia., b) upvc fittings: a) plain tee (ii) 110 mm. dia., d) shoe (ii) 110 mm. dia, colour interlock c.c paver block ( 60 mm thick interlocking designer concrete paver block m-35 grade ), precast chequered cement tiles 22 mm thick dark shade using, precast chequered cement tiles 22 mm thick medium shade, upvcbend 87.50, 110 mm bend, upvc pipe clip 110 mm bend, check valve 32mm, check valve 40mm, bamboo 25 mm dia 2.5 meter long, bamboo ( 8 cm- 10 cm dia) including fixing, polyethylene water storage tank with cover and suitable locking arrangement ., supply of g. i. pipes of tata make including necessary sockets - 15 mm dia.(medium quality), supply of g. i. pipes of tata make including necessary sockets - 25 mm dia.(medium quality), chlorinated polyvinyl-chloride(cpvc) pipe 25mm outer dia., chlorinated polyvinyl-chloride(cpvc) pipe 15mm outer dia., 15 mm ptmt bib cock, ptmt push cock 15 mm dia, mirror of superior make glass 60x45 cm, flushing cistern p.v.c. 10 lts capacity (low level) (white) (withfittings, accessories and flush pipe), upvc pipes (w

Central Government/Public Sector

CTN :45702790

03 Jul, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot miscellaneous scrap - cond. and u/s furnitures of steel and ferrous of various sorts, shapes and sizes which includes steel rack, mobile racking system,book case ,pa system rack,pegeon hole lockers, bureaus,foldable stretchers,chairs of single/double/three seater, iron stand, back chair, arm chair, racks,steel table, computer office table, steel basin stand/trolly, stand for keeping shoe,steel folding screen,computer steel tables with/without drawls, rolling type chair, steel mayo/instrument trolly, steel bed side locker, industrial locker, foot stool, cup boards,platform seater,steel books show case, revolving chair, cot iron railing, iron chair, wheel chair, s type chair,tubular chair with/without arm, visitor chair,executive 3/4/5 seaters, steel chair,file cabinet, nylon chairnetwork rack, steel book case, audio rack,flower cots, data logger box,pediatric cot with railings, steel rakes pigeon hole, office table, rolling executive/non executive chairs,chair steel with arm, steel rake, table steel square with book shelf, battery rack, steel cupboard, almirahs, storage racks, slotted angle steel rack open type, steel chair with seat back, shelves, and cots and all other steel/ferrous furniture nature items of various sorts, shapes and sizes in full/broken/ dismantled/corroded/ attached/damaged and in loose condition with/without various ferrous and non ferrous attachments /fittings in as is where is condition. note: 1) cutting strictly not permitted. 2) segregation is not permitted. 3) removal of any sorts of attachments/adherings/fittings is not permitted. 4) if any stainless steel furniture found , the same has to be handed over to custodian.pl.no. 98415657

corporations/Associations/Others

CTN :45684977

01 Jul, 2026 4.17 Lacs

Pune - Maharashtra

Tender For painting of signboards, general painting, and work related to railings and dividers in ward no. 6 under the yerwada-vadgaonsheri zonal office.

CTN :45685124

07 Jul, 2026 15.00 Lacs

Dungarpur - Rajasthan

Tender For work of installing stainless steel (ss) railings at various locations within the municipal council area.

CTN :45687451

18 Jul, 2026 39.98 Lacs

Lalitpur - Uttar Pradesh

Tender For construction of a 10 kw solar power plant, solar street lights, and parapet at the hanuman temple todiya complex in talbet nagar, along with the supply and installation of steel railings

Railings Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

State Government

Central Government/Public Sector

corporations/Associations/Others