Latest rails joint welding Tenders | Government rails joint welding Tenders

Central Government/Public Sector

CTN :45546808

23 Jun, 2026 NA

Katni - Madhya Pradesh

Tender For supply of set of spare as per attached annexure "a" suitable for rectifier inverter based (igbt) double bridge type welding set, model - mma-630,make- electro plasma equipment p. ltd. [ warranty period: 3 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45546928

06 Jul, 2026 NA

Bikaner - Rajasthan

Tender For supply of at welding equipments (cap pre heating system) with complete set suitable for weldingof rail joints by at welding process as per specification no.spec/tpp-cap-2022 & pre heating system deployed shall have facility to record and save the pre heating parameters viz. pressure and time ,firm details ,welder details and weld location details for a particular weld along with facility to send these preheating parameters and related details automatically as sms to concern railway officials immediately after finishing of preheating.it shall be possible to send this sms simultaneous up to 10 mobile numbersas per clause irst-19-2021, point no.10.1 (iv) date:01/02/2022. as per annexure -a (welding equipment with complete set) [ warranty period: 30 months after the date of delivery ] ]

State Government

CTN :45542764

19 Jun, 2026 NA

Balurghat - West Bengal

Tender For supply of item rate for construction materials for all types of construction works under mgnrega - hire charges of coaltar boiler 900 to 1400 litres, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, hire charges of diesel road roller- 8 to 10 tonne, production cost of concrete by batch mix plant, hire charges of diesel truck-9 tonne, hire charges of sparaying machine including electric charges, hire charges of coaltar sprayer, hire charges of barber green, drying,mixing and asphalt plant, with accessories, capacity 30/45 tonne, pumping charges of concrete including hire charges of pump, piping work & accessories etc., hire charges of derrick monkey rope, hire charges of pump set of capacity 4000 litres/hour, vibrator (needle type 40 mm), machine for rubbing of floors, front end loader capacity 1.00 cum, hire and running charges of tripod and mechanical winch machine complete with power unit and accessories, mastic cooker, hire and running charges of tipper, hire and running charges of loader, hand grinder for mirror polish, hydraulic excavator (3d) with driver and fuel, pin vibrator, surface vibrator, hot bitumen mixer 0.5cum i/c hand cart, hire and running charges of hydraulic piling with power unit etc. including complete accessories and shifting at site, hire and running charges of light crane, hire and running charges of bentonite pump, hire and running charges of vibrating pile driving hammer complete with power unit and accessories, hire and running charges of crane 20 tonne capacity, carriage of concrete by transit mixer, generator 250 kva, paint applicator, mobile crane, tractor with ripper attachment, tractor with trolley, air compressor 250 cm with two leads for pneumatic cutters/hammers, joint cutting machine with 2-3 blades, c.c.batch mix plant, road sweeper, slip form paver with sensor, water tanker 5000 ltr. capacity, concrete joint cutting machine, texturing machine, dozer d-80-a12, motor grade 3.35 meter blade, hydraulic excavator of 1 cum bucker, front end loader 1 cum bucket capacity (incl pol), tipper -5 cum, vibratory roller 8 to 10 tonne, smooth wheeled roller 8 to 10 tonne, tandem road roller, water tanker 5 to 6 kl capacity, air compressor, wet mix plant 60 tph, mechanical broom hydraulic, emulsion pressure distributor @1750 sqm per hour, hot mix plant - 120 tph capacity, hot mix plant 100 tph capacity, paver finisher hydrostatic with sensor control 100 tph, paver finisher mechanical 100 tph, batching and mixing plant @75 cum per hour, concrete paver finisher with 40 hp motor and sensor, generator 250 kva, generator 100 kva/125, truck 5.5 cum/ 10 tonnes, road sweeper (mechamical broom) @ 1250 sqm per hour, drum type hmp of 60-90 tph capacity @ 75 tonne per hour actual output, hire and running charges of drill machine up to 400 mm dia (including cost of mobile oil, disesel consumption in ordinary soil operator), pile integrity testing equipment, excavation of diaphragm wall by mechanical grab, hire charges of tata 407 or equivalent for local shifting, hire charges of diesel truck - 9 tonne (without pol), using cost of ultra voilet radiation tube, compressor, gun, rubber pipes & other accessories - hire charge of plant & machinery i/c necessary fuel, hire charges of suction jeting machine 2200 psi machine i/c pol and operator, hire charges of drill machine upto 30 mm dia, hire charges of sand blasting equipment, hire charges of compressor, welding charges of shear key to existing reinforcement, hire charges of plant and machinery that can inject 350 kg/day, seam bolts and nuts 6 mm dia and 25 mm long, fibre (high impact poly propelene reinforced) cement corrugated sheet 6 mm thick, fibre (high impact poly propelene reinforced) cement close fitting adjustable ridge, fibre (high impact poly propelene reinforced) cement corrugate serrated adjustable ridge, fibre (high impact poly propelene reinforced) cement plain wing adjustable ridge, fibre (high impact poly propelene reinforced) cem

CTN :45371027

18 Jun, 2026 NA

Parganas - West Bengal

Tender For corrigendum : supply of tungsten inert gas (tig) welding equipment as per is 9604:1994 (q2)

CTN :45547978

06 Jul, 2026 NA

Adra - West Bengal

Tender For supply of portable welding & cutting kit, make: victor (by esab), harris, smith equipment, kit includes: carry tote- rugged, molded polypropylene case for portability and protection, torch handle with cutting attachment 100fc torch handle with built-in flashback arrestors and check valves ca 1350 cutting attachment, cutting nozzle: series 3 cutting tip (preinstalled),light-duty regulators: csr 150 series oxygen and acetylene regulators (with easy-to-read gauges), twin welding hose: t-grade, 10ft (3 m) x 3/16" (5 mm), color-coded for safety, welding tips: w-1 welding nozzle, size 1 (additional sizes optional), cutting capacity: standard: up to 12 mm with optional tips: up to 4? (100 mm) (as per victor?s expanded tip range), welding capacity: standard: up to 6 mm with optional nozzles: up to 1?? (31 mm) (using larger welding tips) cylinders: one 4 l oxygen + one 2 l acetylene (approx.) [ warranty period: 30 months after the date of delivery ] ]

CTN :45513288

25 Jun, 2026 NA

Mumbai - Maharashtra

Tender For procurement of heavy duty six station multi gym equipment - heavy duty commercial grade steel, minimum 11 gauge, minimum 50 x 100 mm rectangular steel tube, minimum 3 mm, precision robotic welding, anti-rust treated, electrostatic powder coated, minimum 80 microns, lat pull down, seated row, multi press (chest / shoulder), leg extension, leg curl

Central Government / Public Sector

CTN :44971946

15 Jun, 2026 NA

Parganas - West Bengal

Tender For bid to ras corrigendum : supply of tungsten inert gas (tig) welding equipment as per is 9604:1994 (q2)

State Government

CTN :45520196

25 Jun, 2026 NA

Jhansi - Uttar Pradesh

Tender For erection of 01 nos 33kv rewan bay with supply of material, integration and remote gateway work at 220kv ss bangra under etd jhansi - erection of following different type main and auxiliary structur, columns, beams, peaks, masts ets. suitable for placing of kv equipments., main structure & auxiliary structure., erection of following equipments as per instruction manual of various equipments and technical specification including shifting of material / equipments from sture to erection site including all other associated work to complete the job satisfactorily., 36kv v.c.b., 36kv bi, 36kv li, 36kv ct, ct junction box, cutting. strenghtening. bending. laying 700mm. below in side ground and above ground og following size of ms flat for earthing of main and auxiliary structure. equipment structure t/f body and its material etc. including welding with main earth mat and with object to be earthing / excavation of trenches its back filling., 75x10mm ms flat, 50x6mm ms flat, 25x10mm ms flat, provinig, fixing & installation of glow sign board (as per sample) of size 8ft x 6ft for updated substation single line diagram duly checked & verified by concerned ae, to be fixed in control room building of substation with all other associated work to complete the job satisfactorily as per drawing and technical specn. of upptcl, the glow sign board illumminated using led tube light in sufficient quantity. the board shall be made of acrylic sheet of suitable thickness and color and shall be provided with back support frame & fixing arrangement with wall., interconnection of equipments and bus bar including cutting. bending of conductor and jumping, clamping along with all other associated work to complete the job satisfactorily as per drawing and technical specn., equipment jumper with 1xmoose, 10mtr, 33kv, bus bar jumper with 1xmoose, 10mtr, 33 kv, 6m, laying of following sizes of control cable in the cable trench from control relay panel to various equipments / marshalling boxes and jb etc. in switchyard as per cable schedule., 2c x 2.5 sq mm. unarmoured., 4c x 2.5 sq mm. unarmoured., 6c x 2.5 sq mm. unarmoured., termination of 2cx2.5 sq.mm unarm.ctrl.cable at both end. as per cable schedule., termination of 4cx2.5 sq.mm unarm.ctrl.cable at both end. as per cable schedule., termination of 6cx2.5 sq.mm unarm.ctrl.cable at both end. as per cable schedule., preparation of cable schedule and case interconnection diagram in between relevant panel,cb,ct,pt,etc.., providing and fixing of led street light luminaries, single piece aluminum body suitable for 120 watt having lumen output not less than 10,000 nom on 9 mtr. long stp/substation main structure column with g.1. pipe bracket complete in all respect cat. a philimps bajaj/ crompton/havells or equivalent make including cost of g.1. pipe brackets and all related accessories., supply, supply of single tension fitting suitable for acsr moose as per sample, supply of single suspension fitting suitable for acsr moose as per sample, supply of 33kv ct clamps suitable for acsr moose as per sample, supply of 36kv isolator jaw as per sample, supply of copper bond 16x500mm, supply of 33 kv isolator clamps suitable for acsr moose as per sample, intregration & remote gateway work, supply of required material with installation and intregration of new 33 kv line control & relay panel with iec -61850 compliant ied with existing automation system and addition of bay into remote gateway & data validation work.

State Government

CTN :45520197

25 Jun, 2026 NA

Jhansi - Uttar Pradesh

Tender For erection of 01 nos 33 kv birdha bay with supply of material, integration and remote gateway work at 220kv ss birdha under etd jhansi - erection of following different type main and auxiliary structur, columns, beams, peaks, masts ets. suitable for placing of kv equipments., main structure & auxiliary structure., erection of following equipments as per instruction manual of various equipments and technical specification including shifting of material / equipments from sture to erection site including all other associated work to complete the job satisfactorily., 36kv v.c.b., 36kv bi, 36kv li, 36kv ct, ct junction box, cutting. strenghtening. bending. laying 700mm. below in side ground and above ground og following size of ms flat for earthing of main and auxiliary structure. equipment structure t/f body and its material etc. including welding with main earth mat and with object to be earthing / excavation of trenches its back filling., 75x10mm ms flat, 50x6mm ms flat, 25x10mm ms flat, provinig, fixing & installation of glow sign board (as per sample) of size 8ft x 6ft for updated substation single line diagram duly checked & verified by concerned ae, to be fixed in control room building of substation with all other associated work to complete the job satisfactorily as per drawing and technical specn. of upptcl, the glow sign board illumminated using led tube light in sufficient quantity. the board shall be made of acrylic sheet of suitable thickness and color and shall be provided with back support frame & fixing arrangement with wall., interconnection of equipments and bus bar including cutting. bending of conductor and jumping, clamping along with all other associated work to complete the job satisfactorily as per drawing and technical specn., equipment jumper with 1xmoose, 10mtr, 33kv, bus bar jumper with 1xmoose, 10mtr, 33 kv, 6m, laying of following sizes of control cable in the cable trench from control relay panel to various equipments / marshalling boxes and jb etc. in switchyard as per cable schedule., 2c x 2.5 sq mm. unarmoured., 4c x 2.5 sq mm. unarmoured., 6c x 2.5 sq mm. unarmoured., termination of 2cx2.5 sq.mm unarm.ctrl.cable at both end. as per cable schedule., termination of 4cx2.5 sq.mm unarm.ctrl.cable at both end. as per cable schedule., termination of 6cx2.5 sq.mm unarm.ctrl.cable at both end. as per cable schedule., preparation of cable schedule and case interconnection diagram in between relevant panel,cb,ct,pt,etc.., providing and fixing of led street light luminaries, single piece aluminum body suitable for 120 watt having lumen output not less than 10,000 nom on 9 mtr. long stp/substation main structure column with g.1. pipe bracket complete in all respect cat. a philimps bajaj/ crompton/havells or equivalent make including cost of g.1. pipe brackets and all related accessories., supply, supply of single tension fitting suitable for acsr moose as per sample, supply of single suspension fitting suitable for acsr moose as per sample, supply of 33kv ct clamps suitable for acsr moose as per sample, supply of 36kv isolator jaw as per sample, supply of copper bond 16x500mm, supply of 33 kv isolator clamps suitable for acsr moose as per sample, intregration & remote gateway work, supply of required material with installation and intregration of new 33 kv line control & relay panel with iec -61850 compliant ied with existing automation system and addition of bay into remote gateway & data validation work.

Central Government/Public Sector

CTN :45515759

23 Jun, 2026 NA

Multi City - Maharashtra

Tender For auction sale of pway scrap - scrap m.s melting iiird class i.e. rail pieces below one mtrs of various poundage 60/52kg/ 100/ 90/82/75/35lbs & rail/point &xing materials melted peices, rail flange,rail gola,rails bladges ,broken gate structure of angle, fish plates , broken released jfp, broken f/plate jn. f/plates of various poundage, grider cut pcs, bridge checker plate, conversion material, wooden &t/out bearing plate, slide chairs, welding riser material , broken erc, two way keys, ¿j¿ type erc, m.s. liner, check rail cut pcs, t/rails, s/r, w/r,v/rail cut pieces, washers, tie bars, tie bars fencing, released hook bolt , xing bolt, fish bolt, stud bolt , strecharbar bolts, nut washrs various types ,g/joints of rail 60/52kg, bridge girder broken materials ,released gates materials, various types section boards, st & xing sleepers cut pcs, sej cut rail pcs of t/r, s/rail, stretcher bar, switch chairs ,plate screw, bar strainghting crow bar, beater- pick, pans. mortor, wire, basket, shovel, rail- tong, hs lamp, wire clow, pawrah, various type hammers, augers, adzes, drills,pad lock,blunt ended crow bar , bar claws bar tommy, ballast rake, boxes tools iran,gauge, chain gates, cold sets, jim crew, push trolly, pick axes ,gi bukcet, panches pin slopping, solid box spanner, double face trolly lamp, empty drum 20litrs cap., grease & oil empty drum, adjustable spanner, e.r.c extractor, first aid box for rail fracture, rail dollies , spanner- f/ bolt & light weight , light weight rail cum road trolly,abrisive rail cutting base, drilling machine,chamfering bit, spare part of champring kit,thermit welding tools equipment & accessories 52kg/60kg and mechanical equipment , push trolly wheels, welded chain,whistel, m.s.angle, m.s.rod, m.s.sheet, ballast screen, straight edgs 1 m long/10cm, universal molding, vapariser keys, stand, welding equipment & tools box, crucible charge, bend pipe, chisel, various type boards, plier com, various type drills ,augers, cutter 52kg/60kg, tourches,crushible carring ring,fork, stand, nozzal, moluld shoes 60kg/52kg, tourch house pipe switch fittings & various types of p.way fittings, rpf theft case/cort case (rail/point & xing materials melted peices, rail flange,rail gola,rail bladge ) property inclueds etc¿¿¿.¿¿.

Rails Joint Welding Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

State Government

Central Government / Public Sector

State Government

State Government

Central Government/Public Sector