Latest railway carriage fan Tenders | Government railway carriage fan Tenders

Central Government/Public Sector

CTN :45731031

03 Jul, 2026 NA

Kapurthala - Punjab

Tender For supply of railways carriage fan, swivel type, 110v ac, 400 mm sweep with crashworthy features as per rcf am-4 (ty-xiii) with stainless steel guard to drg.no. icf/sk-7-6-158., as per drawing: is:6680-92 with rdso annexure-h (revised december-2005) rcf corr-1,3 &4 & blade as specified at col- i of rcf am-4 with rubber packing as per drawing no. icf/sk-7-3-058, alt- 'e', item-1, packing instruction: as per standard packing. it should be ensured that item should not rub during transportation. the item should be packed with adequate strength. transit damage , if any , shall be at the cost of supplier. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45664895

14 Jul, 2026 NA

Hubli - Karnataka

Tender For corrigendum : supply of service connector of 2.5 sq.mm cross section for connecting railway carriage fan and light fittings as per item no.wago make or equivalent as per the technical data: (1) type of wiring: side-entry wiring. (2) total number of connection points: 2. (3) total number of potentials: 1. (4) connection technology: cage clamp. (5) actuation type: push-in. (6) connectable conductor material: copper.(7) solid conductor: 0.5 - 2.5 mm 2/20 - 16awg. (8) fine stranded conductor: 0.5 - 2.5 mm 2/20 - 16awg. (9) strip length: 9 - 11mm/ 0.35 - 0.43 inch. (10) width: 8mm/ 0.315 inch. (11) height: 15.5mm/ 0.61 inch. (12) depth: 42 mm/ 1.654 inch. (13) colour: grey. (14) fire load (mj): 0.099 (mj). (15) weight(g): 5(g). [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45733184

08 Jul, 2026 NA

Multi City - Karnataka

Tender For auction sale of depot ferrous scrap - 98050126]scrap cond./released/unserviceable ms scrap such as cbc coupler bodies, angels channels, signal rods, dash pot, yokes, draft gears sets, ms sheets, winch for lc gate, lever lock, lever rods, pull rods, suspension tube, bracket cl, housing axle bearing, chequered plates, cbc operating handle, rail cutter, rel hook, anti roll bracket, dredger drum, chain, centering disc, ms liners, center pivot washer, center pivot ring, side frame key, adopter narrow jaw, anti roll bar, wear plate, adopter wide jaw, suspension rods ,equalizing stay, erc clips, rail flange, chain hook, rotary shield with bearings, sab parts, ls beam, hangers, brake levers, brake hangers, adapter broken, center pivot top, anvil, workout sab, plate screws, transformer body and its ms parts, knuckle, fabricated test rig, gear wheel, anchor link, brake beam cut parts, axle box housing, bearing plates, rivette, chair plate, ms bed plate, ms gauge tie plate, structure bar, ms tie plates, slide chaires, center pivot, tamping tools, jim crow, cribs, track machine parts, locking plate, operating handle, cbc lock, cbc yoke, lower spring sheet beam, rail tong, center beams, screw couplings, lower spring sheet beam, cut pieces of pipes, buffers, buffer plungers, buffer casings, draw gear hooks, iron rods, wire, bolt & nut and other items coming under ms scrap on as is where is condition is available under the custody of cdms 08 ward ap. note: 1.pick and choose of the material are not allowed. loading to be started from one end and to be ended on other end only.(loc:bin no. 121 at scrap yard)

Central Government/Public Sector

CTN :45743740

06 Jul, 2026 NA

Bhopal - Madhya Pradesh

Tender For supply of brushless dc (bldc) railway carriage fan complete with blade and gaurd confirming tordso specification. no. rdso/pe/spec/tl/0021/2005 (rev.3) with amendment no.1 with sweep as 400mm. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variationpermitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45422295

06 Jul, 2026 NA

Bhopal - Madhya Pradesh

Tender For corrigendum : supply of brushless dc (bldc) railway carriage fan complete with blade and gaurd confirming tordso specification. no. rdso/pe/spec/tl/0021/2005 (rev.3) with amendment no.1 with sweep as 400mm. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variationpermitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45710526

08 Jul, 2026 NA

Multi City - Haryana

Tender For auction sale of depot ferrous scrap - scrap and condemned draft gear arrangement with or w/o yoke attachment complete or incomplete of sorts & sizes us & ur, as it is. loc- lying at bin no c-39 in scrap yard judw. remarks:- (1)loading by purchaser (2) private road crane allowed for loading purpose.

Central Government/Public Sector

CTN :45598002

04 Jul, 2026 NA

Bhopal - Madhya Pradesh

Tender For corrigendum : supply of e4363016 railway carriage fan

CTN :45710493

06 Jul, 2026 NA

Jamalpur - Bihar

Tender For auction sale of rolling stock - scrap iron and steel cut up parts of condemned boxnm1, bobrnm1, bobrm1, bcnm1,boxnhl bvzc, bobrnel & boxnr wagons no as following: [1] scr 10099663802 boxnm1 [2] er 72029662187 bobrnm1 [3] er 72029960313 bobrm1 [4] cr 30019060122 bcnm1 [5] nwr 22111111109 boxnhl [6] scr 85099560413 bvzc [7] ser 85079560471 bvzc [8] ser 10079666892 boxnm1 [9] er 72029760012 bobrnel [10] ser 10079665581 boxnr. condition:-[1].the wagon is sold on number basis however delivery shall be given on actual weighment basis at thetime of delivery. the lot weight mentioned in the catalogue is on approximate basis.the maximum permissible deliverable quantity (112.90 mt) is the lot quantity (112.90 mt) as mentioned in the catalogue.[2].the weighment of the material shall be carried out at ssy/jmpw weighbridge . [3]. if the actual quantity found at the time of delivery is less than the estimated/sold quantity, no claim for shortage, refund or proportionate return of sale value shall be entertained.[4]. if the actual quantity found at the time of delivery is more than the estimated/sold quantity, the excess material shall not be delivered to the purchaser and shall be retained/returned to the custodian.[5]. no dispute regarding variation in weight shall be entertained after e-auction sale. [6]. before bidding, bidders are advised to inspect and tally every details of the lot as appearing in catalogue which is published in ireps portal with the actual material in ground. no complaints/claim by the purchaser will be entertained in this regards after e-auction sale.[7] cutting is allowed for loading facilities only. [8] cutting time of sold wagons of jmpw/dhobighat would be 08.00 hrs. to 16.00 hrs. on weekdays and 08.00 hrs. to 12.00 hrs. on saturday. purchaser, their labours or any other staff will not be allowed to remain at dhobighat area beyond the scheduled working hour. the purchaser may, however, be allowed to keep their watchman to guard their material. no cutting tools will be allowed inside dhobighat area on sunday and other holidays. [9] to be sold without all available excluded fittingsas follows:- (i) for boxnm1, bcnm1,boxnhl & boxnr : bogie (except 22w & 22wm), wheel set with ctrb, brake cylinder, draft gear, coupler body, yoke & yoke pin, distributer valve, yoke supporting plate, yoke pin supporting plate, all sorts of bolster springs, slack adjuster, hand brake wheel, knuckle, anchor plate withsafety plate, apm, brake beam complete for casnub bogie, equalising lever with bushes, bogie brake push rod.as per list of excluded fittings of wagon letter no. mc/300/pt-xx kolkata dated 10.04.2024. (ii) for bobrnm1, bobrm1 & bobrnel : bogie (except 22w & 22wm), wheel set with ctrb, brake cylinder, draft gear, coupler body, yoke & yoke pin, distributer valve, yoke supporting plate, yoke pin supporting plate, dom cylinder, square shaft with bush, all sorts of bolster springs, slack adjuster, hand brake wheel, knuckle, anchor plate with safety plate, lsd, apm, brake beam complete for casnub bogie, equalising lever with bushes, bogie brake push rod.as per list of excluded fittings of wagon letter no. mc/300/pt-xx kolkata dated 10.04.2024. (iii) for bvzc wagon : wheel set with rb andaxle box, brake cylinder, distributer valve, draft gear, coupler body, yoke & yoke pin as per list of excluded fittings of wagon letter no. mc/300/pt-xx kolkata dated 10.04.2024.

CTN :45710494

06 Jul, 2026 NA

Jamalpur - Bihar

Tender For auction sale of rolling stock - scrap iron and steel cut up parts of condemned boxnm1, boxnr, boxnlw, bcnm1 & bobrnmi wagons no as following: [1] scr 10099523700 boxnm1 [2] scr 25099661369 boxnr [3] secr 14140762292 boxnlw [4] scr 30099186132 bcnm1 [5] ser 10079666083 boxnm1 [6] er 72029563392 bobrnm1 [7] scr 10099660689 boxnr. condition:-[1].the wagon is sold on number basis however delivery shall be given on actual weighment basis at thetime of delivery. the lot weight mentioned in the catalogue is on approximate basis.the maximum permissible deliverable quantity (79.190 mt) is the lot quantity (79.190 mt) as mentioned in the catalogue.[2].the weighment of the material shall be carried out at ssy/jmpw weighbridge . [3]. if the actual quantity found at the time of delivery is less than the estimated/sold quantity, no claim for shortage, refund or proportionate return of sale value shall be entertained.[4]. if the actual quantity found at the time of delivery is more than the estimated/sold quantity, the excess material shall not be delivered to the purchaser and shall be retained/returned to the custodian.[5]. no dispute regarding variation in weight shall be entertained after e-auction sale. [6]. before bidding, bidders are advised to inspect and tally every details of the lot as appearing in catalogue which is published in ireps portal with the actual material in ground. no complaints/claim by the purchaser will be entertained in this regards after e-auction sale.[7] cutting is allowed for loading facilities only. [8] cutting time of sold wagons of jmpw/dhobighat would be 08.00 hrs. to 16.00 hrs. on weekdays and 08.00 hrs. to 12.00 hrs. on saturday. purchaser, their labours or any other staff will not be allowed to remain at dhobighat area beyond the scheduled working hour. the purchaser may, however, be allowed to keep their watchman to guard their material. no cutting tools will be allowed inside dhobighat area on sunday and other holidays. [9] to be sold without all available excluded fittingsas follows:- (i) for boxnm1, boxnr, boxnlw & bcnm1 : bogie (except 22w & 22wm), wheel set with ctrb, brake cylinder, draft gear, coupler body, yoke & yoke pin, distributer valve, yoke supporting plate, yoke pin supporting plate, all sorts of bolster springs, slack adjuster, hand brake wheel, knuckle, anchor plate withsafety plate, apm, brake beam complete for casnub bogie, equalising lever with bushes, bogie brake push rod.as per list of excluded fittings of wagon letter no. mc/300/pt-xx kolkata dated 10.04.2024. (ii) for bobrnm1 : bogie (except 22w & 22wm), wheel set with ctrb, brake cylinder, draft gear, coupler body, yoke & yoke pin, distributer valve, yoke supporting plate, yoke pin supporting plate, dom cylinder, square shaft with bush, all sorts of bolster springs, slack adjuster, hand brake wheel, knuckle, anchor plate with safety plate, lsd, apm, brake beam complete for casnub bogie, equalising lever with bushes, bogie brake push rod.as per list of excluded fittings of wagon letter no. mc/300/pt-xx kolkata dated 10.04.2024.(iii) sl. no 04 fitted with casnub bogie 22w(m) which is to be sold with wagon.

Central Government And Public Sector

CTN :45702508

06 Jul, 2026 NA

Multi City - Chhattisgarh

Tender For auction sale of rolling stock - total qty.= 02 nos., description: - over-aged bg wagons as per below details. remarks:- 1) disposal weight as mentioned against each wagon is approximate and for reference only. 2) the wagon is to be sold without excluded fittings as mentioned in letter no. mech/hq/003/007/4016 dated 12/11/18 and crse letter no. mech/hq/010/010 warranty dated 09/06/20. 3) excluded fittings to be handed over to consignee/custodian i.e. wheel sets with complete trolleys and other fitting like cbc, cbc lock, yoke, yoke pin, draft, knuckle, knuckle pin, dv, brake cylinders & be pull rod as available at site by the purchaser. 4) front follower of draft gear has also been included in excluded list vide crse letter no. mech/hq/010/010 warranty dated 09/06/20. so the front follower will be retained by the consignee/custodian. 5) wagon to be sold on "as is where is basis" and will be delivered in numbers.

Railway Carriage Fan Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors