Get complete information related to latest Railway Engine Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Railway Engine Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Railway Engine Tenders.
Tender For supply of nylon-66 bush overall size 70 x 100 mm for suspension on bracket of 25 kw trans-mounted alternator as per rdso/pe/sk/tl/0086-2014 (rev ' 2') and rdso specn. no.rdso/pe/spec/ac/ 0006-2009 (rev-1) emboss name or manufacture/trade mark,year or manufacture drg.no. on the nylon bushes. [ warranty period: 30 months after the date of delivery ]
Tender For supply of nylon bush size 62 x 52 x 16 mm to irs drg. no. l/bu-530/m alt. 4. matl.&spec. should conf irm to wd-04 nylon bushes-2002. [ warranty period: 30 months after the date of delivery ]
Tender For supply of m.s. plate (2 nos.) (locking bar assembly) required for 1:8.5 tws turnout as per rdso drawi ng no.-rdso/s-3462a & rdso/s 3404a, as per drawing attached along with all the insulation required (2 no s. insulation plate, 4 nos. nylon washer & 4 nos. nylon bush). [ warranty period: 30 months after the date of delivery ]
Tender For supply of m.s. plate (locking bar assembly) required for 1:8.5 tws turnout as per rdso drawing no.-r dso/s-3462a & rdso/s 3404a, as per drawing attached along with all the insulation required (2 nos. insula tion plate, 4 nos nylon washer & 4 nos nylon bush) [ warranty period: 30 months after the date of deliver y ]
Tender For corrigendum : supply of nylon bush for middle berth stopper drg. no. pd/tpys scr drg. no. c&w-111 [ warranty period: 30 months after the date o f delivery ]
Tender For tender for supply of std self lock nut m10 , shim 0.5mm(ms-146) (plate no-g1-3-1 , sl no-20) , shim 1.5mm(ms-147)( plate no-g1-3-1 , sl no-21) , o ring , gasket( plate no- c1-16-1 , sl no-3) , grease nipple 1 by 8 inch bsp , str (os-678)) , spacer block(plate -b2-18-1) , tape reflective white(plate iv r-14) , tie cable(c1-14-1) , o ring 15.2idx5.30 cross dia , 10 amps fuse , seal(b4-1-1 by 05) , screw button head m6x30 (plate iii o) , washer , 6.86 by 6.73idx25.4 by 25.2odx1.6 thk , std self lock nut m12(ispl-sl-233) , screw m5x30 button head (plate iv l) , bonded washer seal , 1 by 2 inch bsp , bolt m10 x 55 (plate iii b) , washer plain , o ring oblique seal (ispl1207 & ctlg-e3-7-1 , sl-05) , washer 3 by 4 inch bsp(os-1053) , pin hose retainer(plate-b1-17-1) , nut nylon m8 (plate iv t) , bulb(plate-viii h-10) , luck nut gr-8 m8 , screw , gr-8.8m8x25 long , washer plain (plate iv f) , washer medium , 10.0 by 9.9id x 22.2 by 22.1od , hose clamp , nut lock 3 by 8 unf (plate i) , screw (plate iii c) , washer (plate iv m) , capscrew m5 (plate x j) , o ring , bush (item no-309) , shim , std plain nut , plug blanking cap (plate vi c) , nut lock m5 (plate viii a) , washer , stud (plate xvii a) , spring comprassion t by c press main (f5-1-1) , bolt (g1-1-10) , clevis pin , bolt m6x 16 flange reduced hex (plate xxviii a) , bolt m10x80(plate-iii g-3) , screw cap (item no-1750) , setscrew mx10 20mm (plate iii d) , 20 amp fuse(plate- ix e-7) , grommet (plate-d2-1-4) , washer thrust 3.5 mm thick phosphated (plate-f5-3- , nut (a1-1-15) , reflector reflex white(plate iv r-13) , 15 amp fuse(plate-ix e-8) , spring extension (plate xxv a) , spacer , bolt plough 3 by 4 inch unfx23 by 4 inch bs311 type-9(sl-60) , bolt(ispl sl-502) , o ring 274 idx3.5 cross sec dia , bulb(plate-viii h-11) , spacer , rivet nut m10 , bolt(plate xxxi c) , seal ring turquoise , spacer(item no-562) , wheel nut , strap , worm drive clip 70mm long by clip jubilee , lock cover door lh (plate iv n) , liner bearing , relay charge over , gaiter excavator lever , bearing(plate-d1-1-2) , pad wear 7mm upper colour blue , dump switch(plate-x h-2) , blanking plug(ispl h2-7-3) , radiator top hose(plate-xxviii b-14 ) , ring seal , bowl , wiper assy front(item no -955) , pin hinge cab door (item no-306) , switch oil temperature , hose 3 by 8bsp , 530mm long(plate-e1-2-1) , radiator bottom hose(jcb super xxvii b-17) , bearing linner( ms-20) , seal , brake piston (f2-1-30) , mirror rear view(plate-xxxiii) , cover pre cleaner (plate-xxvi b) , friction plate(f5-3-40) , brake piston seal(g1-2-1) , hinge door (item no-305) , tooth (plate-a2-1-1) , seal , strut gas door(plate-iv j-1) , bearing linner , tail lamp right side(item no-907) , tail lamp left side(item no-906) , glass right side quarter light(sl-378) , element suction(jcb 3dx plate b1-2-1 sl no 4) , door seal right hand (jcb super page 95) , filter(94mm) jcb syncro shuttle (ctlg 3dx e3-8-2) , glass left side quarter light , hose 08 bsp hp 545 mm lvb to wa feed pipes(item no , hose 3 by 8 bsp , 1000(item no-1159) , liner bearing , filter element , side cutter double flange , cleaner active wiper(iv r-12 , 383) , pin pivot(plate-a1-7-2) , seal window left hand side (plate iv p) , hose , hose 10 bsp hp 560 mm lvb to wa feed pipes(item no , ignition switch , bucket dipper pivot pin(plate-vi s-1) , hose 10 bsp lp 950 mm (item no- 1158) , cable parking brake , side cutter double flange , hose , 3 by 8 inch bsp x 800long str-str , arm wiper blade assy(item no- 957) , handle door right handle(plate-iv o-9) , element air safety(p3-3-2) air filter inner , leaver tipping (plate-vi t-1) , door handle lh(plate -iv n-9) , hose assy suction(item no - 1202) , hose 06 bsp hp 1910 mma(item no-1161) , hose 10 bsp hp 700 mm(item no-1157) , fan face level 12v (c1-17-1) , adhesive(iv , r-10) , throttle cable assembly (jcb super plate xi a) , light hand lamp 12v , bush , door seal left hand (item no-323) , element air main(plate-p3-3-2) , door tint
Tender For providing and fixing of children play equipment at park near house no.3722 sector -46,chandigarh under m.p.lads (work no.36 18 ls) - m.a.p.s (jumbo 3x1)sr. no. description quantity1 standard see saw 12 double swing 13 wave slide 5 ht. 1area : 4m x 4msafe area : 5m x 5m(jumbo 3 x1) set consist of :standard see saw:this item provides a good entertainer for children. the seats of the see saw are made from rotational molding and the see saw stand is fitted on 40 nb gi pipe. the level is of 15 nb & 25 nb pipes. the bearing used is a heavy-duty bush typedouble swingin the double swing the leg support is bending made of 40nnb gi pipes and top pipe is 50nb gi pipes with gi junction box with powder coating. the swing seat is made up of 10mm thick rubber belt. the belt seat is affixed on 6mm rubber coated gi chain. the ball bearings are mounted inside a specially designed nylon clamp.wave slide:the wave slide chute shall be made up of 4mm thick of fiber reinforced plastic with self-pigmented. the wave shape should be in such manner that it will not give any jerk or bump to the rider. the chute has its end such as it causes safe landing of the child. the landing portion should be in horizontal with respect to the ground. there should be support provided made up of 25 nb gi pipe., wide slide ssarea : 3m x 1.2msafe play area : 4 m x 2.2 mplatform height : 1.2 mthe wide slide on of the attractive slides of its kind. the chute is made of 14 swg ss/gi sheet. the stainless steel used is of 304 grades. the chute is supported by 40x5 ms angles. this chute is attached to the platform made from ss/g sheet. the platform is supported by 40 nb gi pipe. the ladder is made using 20 nb and 25 nb gi pipes. the steps for the ladder are of 20 nb gi pipes. the sliding height is 2.4m. the landing support used is made up of 25 nb pipe. the handrail of the chute is made up of 20nb power coated gi pipe. the slide is innovative wide slide on which at a time 3 kids can slide., swinging loop rung rec. age : 5-14 yrs.the area : 3.2m x 0.9 msafe play area : 4.2m x 1.9 mthis is another of item that provides hanging as well as swinging experience to the children . the frame is fabricated out using 40 nb and 25 nb powder gi pipes. there are 09 triangles loops of 15 nb which are attached to the top pipe of the frame using s hook. the ladder used is designed to the side support pipe itself.
Tender For nylon 66 insulation for 'd' bracket set for irs point machine as per irs type point machine as per spec no.irs-40-84 or latest one set consisting of: 1) insulating plate (rh) as per drg. n o. s3265-1 no, 2)insulating plate (lh) as per drg no. s-3266-1 no, 3)insulating bush as per drg no.s-23199- 4 nos & insulating washers as per drg no.s-8640- 4 nos. accecptable make: similar, (material should supply with secured packing condition). [ warranty period: 30 months after the date of d elivery ]