Latest railway infrastructure Tenders | Government railway infrastructure Tenders

State Government

CTN :44953100

27 Apr, 2026 4.93 Lacs

Mandi - Himachal Pradesh

Tender For tender in advance for repair restoration of damaged 33kvht line( 33kv rail pole kangoo sundernagar, rail pole bijni sundernagar, wood pole slapper sundernagar) due to heavy rainfall for fy 2026-27 in various (e) sections under sssd, hpsebl sunder

corporations/Associations/Others

CTN :44996941

28 Apr, 2026 NA

Jodhpur - Rajasthan

Tender For auction sale of acsr conductor scrap,armoured/flexible/pvc copper cable scrap,armoured alluminium cable scrap/service line scrap,ab cable scrap alluminium,xlpe cable scrap,brass metal parts scrap,radiator of vehicle scrap,m.s. r.s joist scrap (assorted size),m. s. rail scrap (assorted size),mixed iron scrap,automobile scrap,transformer meter box metallic scrap,m.s. tank of transformer scrap (assorted size),g.i/stay/barbad wire/stay wire scrap,11/12 kv vcb/kiosk scrap,11/12 kv vcb kiosk (incomplete) scrap,scrap panel assorted,burnt transformer oil without drum (pcb applicable)

CTN :44971064

06 May, 2026 NA

Darjeeling - West Bengal

Tender For supply of 0.75 inch for casing caping , tape insulation 10 mtr , solid plate with base frame suitable for surface plastic box of 4 module catpart no 30249wh , solid plate with base frame suitable for surface plastic box of 3 module catpart no 30238wh , solid plate with base frame suitable for surface plastic box of 2 module catpart no 30227wh , surface plastic box suitable for moduler switches and socket of 4 module capt part no 21292 , surface plastic box suitable for moduler switches and socket of 3 module capt part no 20449 , surface plastic box suitable for moduler switches and socket of 2 module capt part no 21281 , pvc square block , mcb db spn 8 ways double door 240 v with bus bar , mcb 20 amps sp 240 v , mcb 10 amps single pole 240 v , isolator 40 amp dp 240 volts , pvc copper cable pvc 2.5 sqmm s c multistrand , exhaust fan 300mm sweep with louver shutter , pvc copper cable pvc 1 sqmm s c multistranded conductor for earth wire in green color , steel screw full threaded 0.5 inch , steel screw full threaded screw 1 inch , steel screw full threaded screw 0.25 inch , blank plate of single module cat part no 21598 , puf insulated 55mm thick water tank 1000 ltrs with gi flange for connection with nipple and gasket , bib cock brass 15mm , pillar cock stainless steel cp 15 mm , stop cock brass 25 mm , taeflon tape , pvc float valve heavy duty 25 mm dia suitable for ppr pipe , stop cock brass 15 mm , stop cock brass suitable for 20 mm ppr water supply line , ppr pipe 25 mm dia , ppr pipe 20mm outer dia 3 layer pn 16 , ppr tee 20mm dia , ppr tee 25mm dia , ppr elbow 90 degree 20mm , ppr elbow 45 degree 20mm , ppr elbow 90 degree 25mm , ppr elbow 45 degree 25mm , ppr socket 20mm dia as per is 15801 , ppr union 20 mm as per is 15801 , ppr male threaded socket 20 x 25 mm dia , ppr female threaded socket 20 - 25 mm dia , pvc clip for ppr pipe 25mm dia , ppr reducer socket 25x20mm , 25 mm ppr tank connector , ppr male threaded socket 20 toi 15 mm dia , ppr female threaded socket 20 to 15 mm dia , ppr female threaded elbow 20 to 15 mm dia , ppr male threaded elbow 20 to 15 mm dia , ppr reducer socket 25x20 mm good quality , m seal good quality , whb vitreous ceramic size 450x330mm white complete , pvc flusing cistern 10 ltrs capacity with pvc connection and waste pipe , towel rail cp 600mm long , ewc vitreous ceramic strap including seat cover white s trap complete , looking mirror cum cabinet 450 x 300 mm , soap dishes stainless steel size 10cmx12cm , pvc pipe 2inch dia 6m long , pvc elbow 2 inch , pvc socket 2 inch , pvc floor trap 4 inch dia with grating 2 inch outlet , pvc socket 4 inch , pvc elbow 4 inch dia , pvc pipe 4 inch dia 6 mtr long , pvc grating 4 inch dia , lightning conductor complete set , electric earthing set complete , spanner set consisting of following in each set , centre punch 8mm dia isi marked , electric drill machine heavy duty 235 watt capacity with a set of drill bit , tester for electrician with plastic handle 150mm , showel square nose 14 gauge tata high carbon steel , galvanised iron pan mortar tasla 18 gauge 16 inch dia , measuring fibre glass tape 5 mtr long , picks axes with chiesel and point ends , water bucket steel 13 inch dia , rubber hand gloves for mason , industrial safety helmet , drill bit 3 to 15 mm , electric tile cutting machine with 05 nos inter changable blades , gum boots superior quality //bid details 2 / 67

State Government

CTN :44231929

04 May, 2026 NA

Jamnagar - Gujarat

Tender For corrigendum : supply of various consumable material at emd -1 lighting dept. stps. - flat cable 3 corex4 sqmm with copper conductor for submersible motor, flexible copper wire 1 corex2.5 sqmm (36/0.3 mm)1100v(1 coil is equal to 90 meter), flexible copper wire 1 corex1.5 sqmm (22 / 0.03) voltage grade up tp 1100 volt conf to is- 694, copper cable 2 cx1.5 sqmm, pvc twin wire 2.5mm sqr., self adhesive pvc electric insulation tape rolls with isi mark size 1.80 cm width x 7.5 mtr length x 0.125 mm thickness, of red colour, self adhesive pvc electric insulation tape rolls with isi mark size 1.80 cm width x 7.5 mtr length x 0.125 mm thickness, of yellow colour, self adhesive pvc electric insulation tape rolls with isi mark size 1.80 cm width x 7.5 mtr length x 0.125 mm thickness, of blue colour, self adhesive pvc electric insulation tape rolls with isi mark size 1.80 cm width x 7.5 mtr length x 0.125 mm thickness, of black colour, self adhesive pvc electric insulation tape rolls with isi mark size 1.80 cm width x 7.5 mtr length x 0.125 mm thickness, of green colour, porcelin kit kat fuse 16 amp, porcelain kit kat fuse 63 amp, 415 v , ac, porcelain kit kat fuse 100 amp, 415 v , ac, porcelain kit kat fuse 200 amp, 415 v , ac, din rail mounting channels, ring spanner set model 1812 taparia make, double ended spanner set dep 12, adjustable screw spanner size 8" (200 mm) p.no.1171-8 p, screw driver (tester) taparia product no: 818.special with neon bulb, generally confirming to is 5579-1985 grade - ii, yellow handle,, taparia combination plier, product no.1621-8,210 mm, digital insulation tester, range-0-2000 m-ohm, selectable test voltage-250/500/1000 v dc with rechargeable battery, digital clamp on meter lcd display with backlight, 3-3/4 digit., alluminium ladder self supported a type having 05 feet length, long nose plier insulated with thick c.a. sleeve,165 mm length, taparia make tool, allen key set, product no aki 10, allen key set mm size (09 piece) 1.5,2,2.5,3,4,5,6,8,10 mm, hand drill machine size 13mm, hand grinder machine., aluminium tube terminals10.0 mm2, m.6, aluminium tube terminals16.0 mm2, m6, aluminium tube terminal 35 sqmm,m 8, aluminium tube terminals50.0 mm2, m10, aluminium tube terminals70.0 mm2, m8, aluminium tube terminals95 .0 mm2, m10, pin terminal 1.5 mm2, pin terminal 2.5 mm2, aluminium in line connector25.0 mm2,, 35mm alluminium in line connector als-2"dowell", aluminium in line connector 70 mm2, 95 sqmm crimping alluminium type in-line connectors cat no: hai-15 hex make, crimping tools capacity: 10 mm2 to 185 mm2., crimping tools, capacity: 6 mm2 to 50 mm2., alluminum ring type lug 25 sq. mm, pvc saddle 10 mm, pvc saddle 15 mm, pvc saddle 20 mm, pvc saddle 32 mm, multistrend copper flexible wire 1 core x 4.0 mm2, (7 strendes) pvc (double) insulated, without armourr, 1.1kv grade (100m/coil)

CTN :44757118

27 Apr, 2026 9.00 Lacs

Farrukhabad - Uttar Pradesh

Tender For corrigendum : fabrication work d d - places , replacing wornout runner base and installing a new runner base of cane carrier and baggage elevator and r b c , replacing wornout runner with new one of cane carrier and baggage elevator and r b c , removing wornout angle iron and t iron of the cane carrier and reinstalling it by straightening the crooked part , removing the wornout part of the suit from different places and fitting it with new one , chevron grooving of new rollers of the mill , chevron grooving of old rollers of the mill , remove the wornout partition plates of the juice box above and below the juice heater by 10 or 12 mm ms plate and install it , installing ribs at the top and bottom partitions of the juice heater , repairing save all of qurdbody , removing old wornout gutters installed at various places and installing it with new gutters , remove the old wornout save all from pan and quard and install it with new one , reinstalling the new umbrella fitted inside the pan by making a new one and removing the old one , replacement ribbon arm of the mascute receiving crystallizer , making new separator of a centrifugal machine , removing the wornout truff of the hopper and installing it with new one , making and installing new separators for continuous centrifugal machines , removing the tubes of quad juice heater and dynamic juice heater and expanding them by installing new tubes and giving their hydraulic testing satisfactory of size 42 mm , removing the tubes of pan installing new tubes and expanding them and giving hydraulic tesing with satisfactory trial of size 96 mm , removing the wornout flue gas ducting of both the boilers and installing it with newone making from new or old plates , removing the wornout front and roof plate at boiler number 1 and 2 and installing with a new plate , removing the damaged boiler damper and installing a new one , making bagasse suit and installing. , replacement of juice over flow box of clarifier , making and installing bed of motor and pumps at various places as per requirement , replacement 6 inch dia cooling pipe of sulfur furnace , removing the monitor casing of a machine from old machine and installing it and giving its a trial , making amd replacing manholes at various places , making and replacing the enternals of cather of the pan. , making and replacing the new hood of cane cutter , removing the old bottom plate of the lowest compartment of the clarifier and placing a new plate on it after placing an angle trap as per the instructions and giving a satisfactory water trial , reinstalling the stirrer of the clarifier and giving a satisfactory trial , removing the shaft of a pug mill and replacing the old bushes on both sides and fitting new ones , removing and refitting the shaft of a brown sugar magma mixer and installing with new bush , reinstalling the trufff of connecting rod of the hopper , making and installing new catcher strainer , removing the old rail line of the trolley of the unloader and fitting the new rail line satisfactorily and doing water level , reinstalling the old rail line of the unloader s bridge and fitting it and checking water level etc , removal of old and weak channels of 3 inches to 10 inches diameter installed at various places and installation of new ones as per requirement , cutting and straightening old plates installed at various places as per requirement , removal of old and wornout scrubber installed on sulfur furnace and making and replacing with 8 or 10 mm plate and making all the connections , removing the trufff plate including support corroded shell and top cover plate of the top chamber of the clarifier and fitting the new plate and giving it s a water proof trial , re-installation alignment and //bid details 2 / 47 trial of hopper driving end , making and installing the top cover of the centrifugal machine , making an arm and installing it on the shaft of pug mill , making and installing scrubber and bottle jackets of sulfur f

CTN :44983410

20 May, 2026 13.10 Crore

Ramgarh - Jharkhand

Tender For construction of new line/modification by complete track renewal of existing rail lines of wharf wall loading platform of giddi-a railway siding under argada area of ccl in the state of jharkhand, india.

CTN :44964527

30 Apr, 2026 NA

Kharagpur - West Bengal

Tender For auction sale of others - 12 nos of uncerviceable abandoned masonry structure railway service building-different type of service building as follows- [1] gang hut at kso km 130-11-13-01 nos,[2] store room at kso km 130-07-09-01 nos,[3] repeter room at sua km 138-3a-5a-01 nos,[4] ladies and gents bathroom on pf no1-2 at sua km 138-7-9-01 nos,[5] station building at sua-01 nos [excluding 05 nos of fan and ms grating covers over drain-24 nos] [6] waiting hall at sua-01 nos, [excluding 05 nos of fan and ms grating covers over drain-24 nos] [7] ibh room at bnb km 146-1-3-01 nos,[8] store room at jgm km 153-17-19-01 nos [9] south side pump house at jgm-01 nos[excluding gantry post rail-52kg and other pipe line fitting],[10] north side pump house at jgm-01 nos,[11] gang hut at gii-katb[at lc-88] km 164-13-15-01 nos, [12] gang hut at jgm-katb[at lc-85] km 157-21-23-01 nos. [i] no of bricks-101702.5 nos,[ii] gi sheet-543.84 kgs[iii] ac sheet-3149.72 kgs [iv] structural steel-12572.11kgs,[v] rcc reinforcement-2259.28kgs,[vi] iron door ,iron window,grill -785.7kgs [vii] wooden door-1150 kgs,[vii] wooden window- 300 kgs,[ix]pvc door-20 kgs,[x] stone masonary-39522 kg.total ferrous � 16.160 mt,

State Government

CTN :44951254

08 May, 2026 14.69 Lacs

Raipur - Chhattisgarh

Tender For supply of p-way material and fitting for maintenance of rail line at 2x500mw abvtps,cspgcl, janjgir-champae-comp. no. 297614

State Government

CTN :44742038

08 May, 2026 2.81 Crore

Delhi - Delhi

Tender For corrigendum : rail/crossing/switch loading and transportation from depot to main line and vice versa and rail/crossing/switch replacement work and necessary preparation for at weld at line-3(dwarka sector-21 to noida electronic city), line-4 (yamuna bank to.. - "rail/ crossing switch loading & transporation from depot to main line & vice versa and rail/ crossing switch replacement work and necesary preparation for at weld at line-3 (dwarka sector -21 to noida electronic city). line-4 (yamuna bank to vaishali). line-9 (dwarka to dhansa) of dmrc network."

Central Government/Public Sector

CTN :44964649

04 May, 2026 NA

Multi City - Gujarat

Tender For auction sale of others - released condemned and u/s abandoned railway staff quarters under sse-works-iii-dhd, {[1] e/40 (a to d)- 04unit, location- ppd railway colony, [2] e/1 (a to h)- 08unit, location- jkt railway colony, [3] t/2 (a to d)- 04unit, location- usra railway colony}, total- 16unit consisting of,{(i) ms scrap-jafry, door frame, gi pipe 20mm,32mm, gi fan pipe, window rod, flate 50x50x5 mm, angle praline 75x75x6, in tie50x50x5 mm, electrical 50mm, back side grill, qty- 3996.75 kg approx, (ii) rail-metre guage, qty- 3510.40 kg approx, (iii) wooden scrap- door frame, window frame,jafri/xpm jail, qty- 1111.47 kg approx, (ii) ac sheet, qty- 238.44 sqm approx, (iv) masonary (brick, stone), qty- 426.04 cum approx, (v) rcc steel, qty- 11353.00 kg approx}, fdp- 50 days. note-(1) hidden items other than jvr are not included in this lot, if found it will be handed over to the custodian before delivery. (2) non ferrous if any, not included in this lot. (3) description of lot is as per jvr, (4)the eligible bidder shall prepare and submit the detailed dismantling scheme including methodology, safety precautions, sequence of dismantling, equipment to be used and traffic/safety arrangements to sectional sr. den/den through sr. dmm. (5) dismantling shall be permitted only after approval of dismantling scheme by the sectional sr. den/den, (6) gi pipe line which is laid in the ground is not included in lot.

Railway Infrastructure Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

corporations/Associations/Others

State Government

State Government

State Government

Central Government/Public Sector