Latest railway platform Tenders | Government railway platform Tenders

Central Government/Public Sector

CTN :44841796

04 May, 2026 NA

Delhi - Delhi

Tender For repair and improvement of electric loco pit flooring, drainage ,improvement of area around electric loco shed , arrangement for toilet and improvement of drainage laying of sewer line for electric loco shed, improvement of pathway and drainage between washing line 22&23, repair of toilet and soak pit at different location within station premises for staff, renovation of boundary wall and offices of area near emergency gate near pf 20,east pwi and yard master office renovation and other allied works at delhi main station and repair to damaged platform surface from 1 to 16 at various location suggested by railway engineer ,supply and fixing of rcc & steel benches on various platform, new water booth and water cooler structure, repair to damaged railing grill, gauge installation of over head tank no. 1,2&3 , repair to under ground tank periphery fatehpuri side, repair to offices of pwi east and west ,yard master office, s&t hut, relay room at various location within station premises in the section of sse/w/dli under aden/dli.

CTN :44728059

16 Apr, 2026 NA

Darjeeling - West Bengal

Tender For corrigendum : supply of pressure die cast aluminium ip 66 with high power led as light soure and electronic driver of 24 w led 6000k , mirror led ligt 9 watt up and down type cat part no lhesabp7in1w009 , elect bell ding dong , surface plastic box suitable for moduler switches and socket of 4 module , surface plastic box suitable for moduler switches and socket of 3 module , surface plastic box suitable for moduler switches and socket of 2 module , solid plate with base frame suitable for surface plastic box of 4 module , solid plate with base frame suitable for surface plastic box of 3 module , solid plate with base frame suitable for surface plastic box of 2 module , blank plate of single module cat part no 21598 , pvc casing capping 1 inch length 6 ft , pvc elbow for casing capping of size 1 inch length 6 ft , pvc tee for casing capping of size 1 inch , ceiling rose pvc , pvc round block , steel screw full threaded 0.5 inch , steel screw full threaded screw 1 inch , steel screw full threaded screw 0.25 inch , mcb db 12 way 240 volt double door , mcb 6 amp sp 240 volts , mcb 20 amp 240 volt , mcb double pole isolater 63 amp 240 volt , pvc cable insulated aluminium conductor served with inner sheathing of pvc tape armoured with galvanized steel wire or tape and overall pvc sheathed cross sectional area 10 sqmm 2 core , pvc 1.5 sqmm copper cable single core frls with multistrand , pvc 1.5 sqmm copper cable single core frls multistranded conductor for earth wire in green colour , pvc insulated and pvc sheathed multistranded copper conductor flexible industrial cable 1100 voltt three core 1.0 sqmm , pvc 2.5 sqmm copper cable single core , pvc 1.0 sqmm copper cable single core , inverter 02kva capacity and battery combo for home and office , lightening conductor complete set as per brief tech specification , elect earthing complete set as per brief tech specification , packaged septic tank specially designed for the anaerobic digestion in which bacteria can treat waste under most favorable condition with lldpe tank , pre-fabricated soakage pit of 2000 ltrs capacity with 100mm dia swr pipe and all necessary fittings , puf insulated water tank of 2000 ltrs capacity with insulated lid and locking arrangements , water staging platform made of ms angle of size 65mmx65mmx6mm for a 2000 ltrs pir insulated tank will be provided , ppr pipe 20mm dia , ppr pipe 25mm , ppr pipe 15mm dia , ppr tee 20mm , ppr tee 25mm , ppr elbow 90 degree 20mm , ppr elbow 45 degree 20mm , ppr elbow 25mm , ppr elbow 90 degree 25mm , ppr elbow 45 degree 25mm , ppr male threaded socket 20-15mm dia , ppr female threaded socket 20-15mm dia , ppr female threaded elbow 20-15mm dia , ppr male threaded elbow 20- 15mm dia , ppr socket 20mm dia , ppr socket 25mm dia , ppr union 20mm , ppr union 25mm , ppr reducer 25x20mm , ppr reducer tee 25x20mm , bib cock cp 15mm chromium plated suitable for 15mm ppr water supply line , stop cock brass 20mm suitable for 20mm ppr water supply , stop cock cp suitable for 15mm ppr water supply line , pillor cock cp chomium plated isi marked suitable for 15mm ppr water supply line , stop cock cp 25mm suitable for 25mm ppr water supply line , taeflon tape , float valve 25mm dia suitable for ppr pipe , 25mm ppr tank connector , pvc pipe 4inch dia 6 mtr long heavy duty type a having 5 kg pressure , pvc socket 4inch dia , pvc elbow 4 inch , pvc tee 4 inch , pvc floor trap 4inch dia with grating 2 inch , iwc stainless steel including foot rests complete , pvc flushing cistern 10 ltrs capacity with pvc connection pipe 2ft and waste pipe 1 mtr , wash hand basin stainless steel //bid details 2 / 86 of size 530mmx345mm , 15mm dia pillar taps , pvc connections 15mm size with ptmt nuts of length 600mm long , bowl urinal stainless steel of size 465mm x 355mm x 265mm , looking mirror 600mm x 450mm with 5.5 mm thick float mirror , sheet glass self assembly consisting of 5.50mm thk sheetglass 12cm wide , pvc p trap 110 x 75mm , aluminium cloth peg set o

CTN :44610065

16 Apr, 2026 NA

Darjeeling - West Bengal

Tender For corrigendum : supply of supply of 9.6 kw high head water pump , pump set power 02 hp capacity of fuel tank 1.50 ltr , themal insulated pp-r pipes of dia 32 mm , joint insulation arrangement of polyurathane foam section of 50mm thickness 300mm long , 32mm ppr socket pn25 , 32mm ppr elbow 90 pn25 , 32mm ppr elbow 45 , 32mm ppr union pn25 , 32mm ppr brass socket , themal insulated pp-r pipes of dia 25 mm , 25mm ppr socket pn25 , 25mm ppr elbow 90 pn25 , 25mm ppr elbow 45 pn25 , 25mm ppr union pn25 , 25mm ppr brass socket , 25mm pp-r flange connection with nipple and gasket , 25mm pp-r tee , 25mm external thread brass gate valve , teflon tape , 50mm dia sluice valve pn 16 cast iron rising flanged end , puf insulated 55mm thick water tank 2000 ltrs , water staging platform made of ms angle of size 65x65x6 mm , hot water boiler of capacity 500ltrs , gi tube 50mm dia high grade including union socket elvow and connected items , 50mm dia gate valve brass with all connected accessories complete , pvc sheathead copper cable 2.50 sqmm single core with multistrand 1100 volts grade , socket multipurpose 3 pin 10 and 3 pin 20 amp modular type of 2 module , switch piano moduler type 20 amp one way , mcb db spn 8 way double door 240 v with bus bar , surface plastic box suitable for moduler switches and socket of 4 module , solid plate with base frame suitable for surface plastic box of 4 module , pvc insulated and pvc sheathed flat three core 16 sq mm industrial cable for submersible pump motors

Corporations And Associations And Others

CTN :44771811

14 Apr, 2026 10.45 Lacs

Delhi - Delhi

Tender For supply and installation of children play equipments under mlalads funds in different parks under municipal corporation of delhi. - supply & installation of children play equipments under mlalads funds in different parks under municipal corporation of delhi., supply and fixing of arch swing. leg support : 80 mm nb pipe, seat- anti skid rubber belt. bearing : heavy duty ball bearing. area : 3.0 m x 2.5 m. height : 2.5 m. top bar : 60 mm nb pipe. suspension : 6 mm rubber coated chain. the topcoat is duly powder coated. in this one child can enjoy the swing at one time. the arch shaped side frame shall be made of 80mm nb b class gi pipe shall be made up of 50mm nb b class gi pipe. the frame shall be powder coated to give an aesthetic look. the swing shall be made up of 10mm thick anti skid rubber top the rubber belt seat / u shape swing seat with 2 eye bolt tyb-s06. made of polyurethane of size 53 x 20.5 x 20 shall be suspended on 6mm rubber coated gi chairn. the bail bearings shall be mounted inside a specially designed nylon clamp. coating with pure polymer powder with 7 tank treatment 60 to 70 micron thickness. the holding down/fixing of equipments shall be emboded in cement concrete in the ratio of 1:2:4 (1cement : 2 coarse sand :4 stone agg. 20mm nominal size) (as per direction of officer in charge.), supply and fixing of std. see sawhandle :-20 mm n b pipe. lever-32 mm n b pipe. colmun : 60 mm n b pipe. bearing : nylon bush press fitted. seats: frp seats with steel frame. the topcoat is duly powder coated. the level of see saw shall be made from 15, 20 and 25mm nb b class gi pipe. the seat of see saw shall be made from frp/lldpe. the stand and bush bearing made in 40mm nb b class gi pipe. see saw lever shall be welded to 5mm thickness ms plate for nut bolting with stand. all pipes flat shall be powder coated to avoid rusting. coating with pure polymer powder with 7 tank treatment 60 to 70 micron thickness. the holding down/fixing of equipments shall be emboded in cement concrete in the ratio of 1:2:4 (1cement : 2 coarse sand :4 stone agg. 20mm nominal size)c37c40c41c39 (as per direction of officer in charge.), supply and fixing of frp box slide.ladder-frame-25mm n b pipe. handdril-20 mm n b pipe. support-40 mm n b pipe. area : 4.8 m x 0.5 m. platform height : 2.1m. chute :4.0 mm thk f r p. chute length: 4 m. step-width- 75mm. thread 90mm. riser 250mm. the main frame of 2.1mtr height plat-form having pipes are of 40 mm nb b class gi pipe. the box slide is of material frp (fibre reinforced plastic) with attractive beauty colour and flat surface at end of slide for safe landing. the reeling made from 20 mm nb b which can be use like handle to get a grip while start sliding. -the staircase made from 25 mm nb b class g.i. pipe. coating with pure polymer powder with 7 tank treatment 60 to 70 micron thickness. the holding down/fixing of equipments shall be emboded in cement concrete in the ratio of 1:2:4 (1cement : 2 coarse sand :4 stone agg. 20mm nominal size) (as per direction of officer in charge.), supply and fixing of spiral slide. ladder-frame- 25m m n b pipe. handrail - 20 mm n b pipe. centre support- 50 mm n b pipe. area : 2.5 m x3.5 m. platform height : 2.1 m. chute f r p the topcoat is done using the best quality brand or duly powder coated. spiral slide shall be chute made of frp (fiber reinforced plastic / lldpe (low linear density poly ethyline) having thickness of 4mm slide center support shall be 80mm nb b lass gi pipe. landing module shall be supported by 20mm nb b class gi pipe. slide extension platform shall be made from frp / lldpe. the railing shall be made from 15mm nb and 20nn nb b class gi pipe. all pipes shall be coated with pure polymer powder with 7 tank treatment 60 to 70 micron thickness. the holding down/fixing of equipments shall be emboded in cement concrete in the ratio of 1:2:4 (1cement : 2 coarse sand :4 stone agg. 20mm nominal size) (as per direction of officer in charge.), supply and fixing o

CTN :44746406

28 Apr, 2026 NA

Lucknow - Uttar Pradesh

Tender For 1-devlopment of station with required facilities for passengers at mbp station in ljn division, 2- improvement of platform surface on pf no. 1 to 6 with improvement of concourse area, passenger hall, waiting hall and water supply pipe line, toilets and circulating area at ljn station, 3- s&t work in connection with provison of new pp shelter at pf no. 2, 3, 4 & 5 due to exisiting infringement of sod in old pp shelter and providing galvanized sheet pf no. 1 & 6 of ljn station in section of sse/w/ljn, 4- provision of telecom facilities for 2nd entry gate (south side) at sddn in ljn division.

Central Government/Public Sector

CTN :44746264

24 Apr, 2026 NA

Shakti - Chhattisgarh

Tender For electrical works in c/w development of second entry and surface renovation of platform no.1 and 2 at kkp railway station under abss left over works.

Central Government / Public Sector

CTN :44746919

23 Apr, 2026 NA

Secunderabad - Telangana

Tender For supply of precor trm 731 treadmill or similar make- built for high-use on our commercial platform, thistreadmill sacrifices nothing in longevity, making it a money-saving valuable investment. features like the active status light? make it easy to maintain for any of your staff and decreases product downtime. large advanced led display (p31 console); 27 workouts; commercial 4hp ac motor; integrated footplant technology, ground effects impact control system; running surface 60 dimension(lxwxh)-83"x35"x62" [ warranty period: 30 months after the date of delivery ]

CTN :44693277

09 Apr, 2026 1.37 Crore

Pune - Maharashtra

Tender For repair, reconditioning and maintenance of 12 x 8 m 5 nos radial gate, rg hoist 42 ton cap5 nos. by replacing old wornout both side and bottom replacing old wornout dial indicatorassembly ne, carring out work at dimbhe project. - repair, reconditioning and maintenance of 12 x 8 m - 5 nos radialgate, rg hoist 42 ton cap. - 5 nos. by replacing old wornout bothside and bottom rubber seal, replacing old wornout dial indicatorassembly new one, carring out welding work at downsteamside of skin plate, replacing of hyd. brake assembly with newem brake assembly, removing and grinding of spatter andwelding spot and cleaning to wall plate, sill plate to minimisefriction with rubber seal, servicing to guide roller, removingcover from trunion girder box, cleaning and painting insidetrunion girder box, replacing broken flange coupling, repairand reconditioning of 42 ton cap. hoist gear train by replacingwornout bearings, removing dry and old grease from gear andpinion by applying new, repair and strengthening of ladders from deck bridge top to hoist bridge and extended platform ofby welding replacing wornout chequrred plate from hoist bridgeand poeg cabin and platform, repair and maintenance of poeggate size 2.50 x 4.68 mtr. - 1 no. and its hoist 45 ton cap byreplacing wornout bearings, rubberseal and replacing em brakecomplete work with sand blasting, surface preparation applyingred oxide paint and coal tar paint and flat oil paint as perstandard practice with test and trial at dimbhe dam project.

Central Government/Public Sector

CTN :44699501

21 Apr, 2026 NA

Madurai - Tamil Nadu

Tender For s&t arrangements in connection with madurai division - svga station improvements to platform surface an circulating area

CTN :44676007

10 Apr, 2026 19.81 Lacs

Kalpakkam - Tamil Nadu

Tender For providing of repair, maintenance, and installation of plant/ systems/equipments (version 2) - industry unit; sl no 1 installation of scaffolding around chimney for height work above 10 m; as per tender conditions,repair, maintenance, and installation of plant/ systems/equipments (version 2) - industry unit; sl no 2 supply of structural steel items from sail / rinl / jindal / tata and fabrication as per drawings, including inspection, non-destructive test etc..,repair, maintenance, and installation of plant/ systems/equipments (version 2) - industry unit; sl no 3 fabrication, installation of platform and support of chimney and strengthening of ladder works including marking, cutting, shifting, machining, t..,repair, maintenance, and installation of plant/ systems/equipments (version 2) - industry unit; sl no 4 paint supply, surface preparation and painting of 1 coat of epoxy zinc phosphate primer to 50 micron (minimum) and 2 coats of epoxy cured polyamid..,repair, maintenance, and installation of plant/ systems/equipment

Railway Platform Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Corporations And Associations And Others

Central Government/Public Sector

Central Government / Public Sector

Central Government/Public Sector