Latest railway signaling Tenders | Government railway signaling Tenders

Central Government/Public Sector

CTN :40189985

13 May, 2025 22.26 Lacs

Chennai - Tamil Nadu

Tender For e- tender for electrification work for new vtms at signal station in chennai port authority under two cover system

Central Government / Public Sector

CTN :40176496

23 May, 2025 NA

Guntakal - Andhra Pradesh

Tender For zonal piece work contract - execution of works for the period from 01/07/2025 to 30/06/2026 in zone - south colony of guntakal including pf 1 & 2, upto outer signal on dharmavaram line and inclusive of all works under aden/sw/gtl sub-division.

Central Government And Public Sector

CTN :40130938

19 May, 2025 NA

Katihar - Bihar

Tender For signal and telecom work for extension of short csl lines into full csl at singabad (sqb) station

State Government

CTN :40137488

19 May, 2025 7.09 Lacs

Khandwa - Madhya Pradesh

Tender For work contract for shifting of shunt signal sh03 towards bir station outside railway gate boundary wall and supply installation and termination of earth electrode for sandt system installed at sstpp, mppgcl, dongalia, khandwa

corporations/Associations/Others

CTN :40126145

05 May, 2025 2.62 Lacs

Pimpri - Maharashtra

Tender For 22/2025-26 purchase of laqshya instruments - purchase of instruments ( laqshay), radiant warmer- technical specification of radiant warmer with baby bassinet a radiant warmer is used to keep the patient s core temperature stable at 37 o c. it should be microprocessor controlled radiant warmer with manual and servo options. it should have facility to display both skin and air (ambient) temperature separately.. it should have audiovisual alarm facility for overheating beyond set temperature range. it should have alarm facility for patient temperature less than or greater than the required temperature i.e. above or below the set range. it should rotate and swivel in different direction, so as to allow taking x-ray. the light should be dazzle free. it should have alarm for power failure. it should have alarm for heater failure and auto cut off for high temp. it should have alarm for probe failure. it should have time out alarm in manual mode. it should have facility to auto reset the system in case of hang up caused by power fluctuation. it should have manual setting for high and low alarm setting. in servo mode, the heater output should be controlled to maintain the baby at the required set temperature. in manual mode, the heater output should be directly controlled by a setting on the front panel should have a facility to lock the keyboard to avoid unwanted user. the desired temperature range from 25 to 40 degree c. the resolution should be 0.1 degree c halogen based observation light should be provided for observing the baby. it should be mounted on a pole with sturdy base with lockable castors power supply: power input to be 220-240 vac, 50hz fitted with indian plug. certificate of calibration and inspection from the factory. warranty: comprehensive warranty for 5 years after warranty documentation: user, technical, maintenance manuals to be supplied ce, iso certified , fetal doppler - technical specification of fetal doppler should be compact, table type and light weight. large lcd display for display of fetal heart rate. back light for better visibility display signal quality, low battery, etc., high sensitivity doppler probe of frequency 2.0 mhz ultra sound intensity 10mw/cm2. built-in speaker with output not less than 1.0w should work on rechargeable batteries with minimum battery time of 300minutes. battery charger and spare set of batteries aa type to be supplied. volume control facility and audio output for ear phone should be available. heart rate range should be from 50 to 240 b pm with accuracy of + /-2% should be water proof body. should have facility for fhr data transfer to pc. doppler probe should be light weight with holder facility when not in use. should be supplied with carrying case. machine should be iso mark, baby digital thermometer - technical specification of baby digital thermometer range 0.1 to 1000 degree centigrade measurement mode- min, max, average, differential, dual temperaturereading measurement unit- degree centigrade, degree fahrenheit,kelvin temperature probe with connecting cable relative humidity10 to 90% rh non-condensing ip rating- ip 40 g) probe response time 2-3 seconds it should be who & unicef standards, delivery trolley/patient stretcher trolley- technical specification of patient stretcher trolley overall size: 1905mm l x 710mm w x 660mm to 910 mm h. stretcher dimension 1830 mm l x 555 mm w. two section top. height adjusted by foot operated maintenance free hydraulic pump. height adjustment shall be obtained by hydraulically operated mono block type linear actuator pump foot operated actuation having stroke of 140 +/- 5 mm, push force 10 kn at 270 bars, number of complete pump stroke 22 to 24 for full stroke length x-ray permeable removable stretcher, backrest raised on ratchet. quick trendelenburg as well as reverse trendelenburg positions shall be provided with easily accessible operating handle provided with two gas springs for easy action. s.s. saline rod with 12 mm dia s.s

corporations/Associations/Others

CTN :40126147

05 May, 2025 2.62 Lacs

Pimpri - Maharashtra

Tender For 22/2025-26 purchase of laqshya instruments - purchase of instruments ( laqshay), radiant warmer- technical specification of radiant warmer with baby bassinet a radiant warmer is used to keep the patient s core temperature stable at 37 o c. it should be microprocessor controlled radiant warmer with manual and servo options. it should have facility to display both skin and air (ambient) temperature separately.. it should have audiovisual alarm facility for overheating beyond set temperature range. it should have alarm facility for patient temperature less than or greater than the required temperature i.e. above or below the set range. it should rotate and swivel in different direction, so as to allow taking x-ray. the light should be dazzle free. it should have alarm for power failure. it should have alarm for heater failure and auto cut off for high temp. it should have alarm for probe failure. it should have time out alarm in manual mode. it should have facility to auto reset the system in case of hang up caused by power fluctuation. it should have manual setting for high and low alarm setting. in servo mode, the heater output should be controlled to maintain the baby at the required set temperature. in manual mode, the heater output should be directly controlled by a setting on the front panel should have a facility to lock the keyboard to avoid unwanted user. the desired temperature range from 25 to 40 degree c. the resolution should be 0.1 degree c halogen based observation light should be provided for observing the baby. it should be mounted on a pole with sturdy base with lockable castors power supply: power input to be 220-240 vac, 50hz fitted with indian plug. certificate of calibration and inspection from the factory. warranty: comprehensive warranty for 5 years after warranty documentation: user, technical, maintenance manuals to be supplied ce, iso certified , fetal doppler - technical specification of fetal doppler should be compact, table type and light weight. large lcd display for display of fetal heart rate. back light for better visibility display signal quality, low battery, etc., high sensitivity doppler probe of frequency 2.0 mhz ultra sound intensity 10mw/cm2. built-in speaker with output not less than 1.0w should work on rechargeable batteries with minimum battery time of 300minutes. battery charger and spare set of batteries aa type to be supplied. volume control facility and audio output for ear phone should be available. heart rate range should be from 50 to 240 b pm with accuracy of + /-2% should be water proof body. should have facility for fhr data transfer to pc. doppler probe should be light weight with holder facility when not in use. should be supplied with carrying case. machine should be iso mark, baby digital thermometer - technical specification of baby digital thermometer range 0.1 to 1000 degree centigrade measurement mode- min, max, average, differential, dual temperaturereading measurement unit- degree centigrade, degree fahrenheit,kelvin temperature probe with connecting cable relative humidity10 to 90% rh non-condensing ip rating- ip 40 g) probe response time 2-3 seconds it should be who & unicef standards, delivery trolley/patient stretcher trolley- technical specification of patient stretcher trolley overall size: 1905mm l x 710mm w x 660mm to 910 mm h. stretcher dimension 1830 mm l x 555 mm w. two section top. height adjusted by foot operated maintenance free hydraulic pump. height adjustment shall be obtained by hydraulically operated mono block type linear actuator pump foot operated actuation having stroke of 140 +/- 5 mm, push force 10 kn at 270 bars, number of complete pump stroke 22 to 24 for full stroke length x-ray permeable removable stretcher, backrest raised on ratchet. quick trendelenburg as well as reverse trendelenburg positions shall be provided with easily accessible operating handle provided with two gas springs for easy action. s.s. saline rod with 12 mm dia s.s

Central Government/Public Sector

CTN :40132164

26 May, 2025 NA

Multi City - Multi State

Tender For supply of led signal lighting unit 110v ac for calling on signal in railway signaling

Central Government/Public Sector

CTN :40106156

19 May, 2025 NA

Multi City - Multi State

Tender For (i) zone work for year 2025-26 in sector sb (whole service building ): anusandhan bhawan(rtrc building), canteen, cycle stand, sc/st association office. rpf barrack post, tenoffice, post office, ems office shed no. 3 & 5, manak bhawan(annexe-i) with lab block,telephone exchange, design substationb, computer sub station, badminton hall, t.t. hall,temple sub stationb, nursery, fob, central bank, both rajdhani hall, b&s lab, newauditorium,rpf post, sse/sb & sse/health office, scout hut, class iii& class iv associationoffice, vcf lab, berthing lab, air brake lab, signal lab, 33kv substation, ti lab, ed lab,testing workshop, research foundry, trrc, receiving sub station, directorate storeoffice, ge lab tmm lab, m&c lab, ndt & heavy signal lab, ft lab, motor garage,abhikalp bhawan(annexe ii), shed no. 8,9,10, central store, old auditorium (ii) zone workfor year 2025-26 in sector-a old and new colony ,orh,vip rest house, vvip rest house,officers club, lake park, swimming pool etc.

CTN :40092418

30 Apr, 2025 8.16 Lacs

Mahabubabad - Telangana

Tender For development of dumping yard at signal colony by laying of approach bt road (balance work) from signal colony cc road to dumping yard entrance in mahabubabad municipality under 15th f.c (tied) grant.

CTN :40084154

21 May, 2025 NA

Kolkata - West Bengal

Tender For request for proposal (rfp) for appointment of authority engineer for providing project supervision services for various signal & telecommunication work at various project sites under the jurisdiction of cste/project/ser for a period of 24 months across all divisions of south eastern railway

Railway Signaling Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors