Latest railway track item Tenders | Government railway track item Tenders

Central Government/Public Sector

CTN :40473339

30 May, 2025 NA

Kanpur - Uttar Pradesh

Tender For supply of wheel distance measuring gauge as per following specn:- length: 1596 +/- 0.5mm (range 1585 to 1605mm) for meserment . accuracy : 0.1mm through vernier scale. setting : must set 90 degree to the flange . parallelism : to the main axle prospective of track level which should be indic ated by the same equipment . material: hard extruted steel tube with 1.2mm thickness. fixed lug on one end spring loaded moving lug on the other end with locking system. spirit level in the center of th e gauge. packing: wooden box. [ warranty period: 30 months after the date of delivery ]

corporations/Associations/Others

CTN :40125346

10 Jun, 2025 3.32 Lacs

Anpara - Uttar Pradesh

Tender For corrigendum : supply of track feed battery charger for s and t system of mgr of atp, anpara.

CTN :40427744

11 Jun, 2025 NA

Porbandar - Gujarat

Tender For supply of procurement and installation of photo studio accessories - pantograph system 2 fix track , studio standard kit accessories , strip soft box with light , wall mounted backdrop system three colour in cloth with automatic , display monitor 4k 42 inch , photo lab

CTN :40431847

05 Jun, 2025 26.45 Lacs

Multi City - Andhra Pradesh

Tender For providing electrical supply and fixing windows to new municipal office building in piduguralla municipality under special grant any government/general funds - 1 flooring with vitrified tiles of 1st quality, set over base coat of cement mortar (1:8), 12 mm thick over cc bed already laid or rcc roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, including seigniorage charges, etc., complete for finished item of work, but excluding the cost of conveyance of all materials. 2 flooring with non - skid red or white full body ceramic floor tiles of size 600 x 600 mm and thickness between 8 - 10 mm 1st quality conforming to is:13711, is:13712, is:13630 (parts 1 to 15) of any colour and finish in all shades and designs set over base coat of cement mortar (1:8), 12 mm thick over cc bed already laid or rcc roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete. 3 providing skirting to internal walls to 15cm height/risers of steps with soluble salt porcelain vitrified tiles screen printed and polished of size 600 x600mm and thickness between 8-9mm 1st quality set over base coat of cm (1:5) 12mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete for finished item of work, 4 dadooing to walls with glazed red or white full body ceramic wall tiles of size 200 x 300mm and thickness 6mm 1st quality set over base coat of cm (1:3) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete including seigniorage charges, etc., complete. 5 providing impervious coat to exposed rcc roof slab surface with c.m.(1:3) 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost of all materials, seigniorage charges, excluding conveyance charges of materials and including charges all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junction of wall and slab etc, complete for finished item of work as per s.s. 6 supplying and fixing of unplasticised poly vinyl chloride (upvc) sliding windows three track -two glass shutters sliding and one mesh shutter duly manufactured using upvc reinforced profiles of (94 mm x 45 mm)/(80 mm x 52 mm) x 2.0 mm for outer frames, (58 mm x 39 mm)/(54 mm x 38 mm) x 2.0 mm for sliding shutter frames capable of mounting single glazing system structurally reinforced with hot dip galvanized up to 50 microns of minimum thickness of 1.2 mm prefabricated & welded through fusion welding the window sash shall be fitted with 5 mm thick clear float glass of reputed make and mesh shutter frame shall be (42 mm x 25 mm)/(52 mm x 21.5 mm) x 2 mm fitted with nylon/ polymer mesh on rollers/ pulley duly fixed with tpv gaskets/ epdm weathering seal resistant accessories like locking system 1 no., per set of sashes and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site with templates for casement sizing complete for finished item of work. 7 supply,delivery and labour charges for fixing of 48" (1200mm) cei

CTN :40432393

12 Jun, 2025 NA

Jamalpur - Bihar

Tender For open e-tender for the work of different type of track activity like casual renewal of rail-sleeper-switch-sej, tamping of track, deep screening, casual renewal of fittings, assisting track machine etc. with other ancillary work and cleaning of drainage system of jamalpur-keul (ex.) double line (km 356/315-402/545 up & dn/l in the section of sr. section engineer/p. way-ii/jamalpur under assistant engineer/l/jamalpur in the jurisdiction of sr. divisional engineer-iii/e. railway/ malda.

CTN :40432392

12 Jun, 2025 NA

Bhagalpur - Bihar

Tender For open e-tender for the work of different type of track activity like casual renewal of rail-sleeper-switch-sej, tamping of track, deep screening, casual renewal of fittings, assisting track machine etc. with other ancillary work and cleaning of drainage system of bhagalpur(excluding)-jamalpur(excluding) double line (km 307/0-356/315 up & dn/l)in the section of sr. section engineer/p. way-1/jamalpur under assistant engineer/l/jamalpur in the jurisdiction of sr. divisional engineer-iii/eastern railway/malda.

State Government

CTN :40372672

05 Jun, 2025 11.82 Crore

Delhi - Delhi

Tender For construction of 400m(6-lane) synthetic athletic track and 200m speed track(4-lane) world athletic class ii certified full pur system with full epdm including sub base, natural grass football field, skating rink an miscellaneous allied civil works all

CTN :40423928

30 May, 2025 NA

Haldia - West Bengal

Tender For supply of various conveyor sections and spare for conveyor system - supply of various conveyor sections, 1. conveyor section for centrally located drive: the conveyor section shall be used for centrally located drive units. total length of the section shall be 2 meter. the conveyor section shall have all the necessary items and ready to replace the existing section. vendors scope of supply includes, conveyor section assembled with side channels, conveyor tracks, flange ends at both ends, railing cum leg supports, railing angles, whmwpe wear pads fitted on the track, pillow block mounting, gear box mounting frame, idler shaft, idler sprockets, counter weights, soap solution tray, gaskets, anchor fasteners, m10 mounting bolt & nuts including chain complete in all respects including painting., conveyor track for straight section: this shall be used for existing straight conveyor section to replace the damaged conveyor tracks. 2.5 meter conveyor tracks (top and bottom) assembled with flanges, fitted with wear pads., common tail end: this common tail end should be combined type and total length of the section shall be 1.5 meter. the section shall have all the necessary items and ready to replace the existing section. vendor s scope of supply includes, common tail end conveyor section assembled with side channels, conveyor tracks, flange ends at both ends, railing cum leg supports, railing angles, whmwpe wear pads fitted on the track, idler shaft, idler sprockets, soap solution tray, gaskets, anchor fasteners, m10 mounting bolt & nuts including chain complete in all respects including painting., straight conveyor section: this is standard 2.5 meter straight conveyor section complete in all respects. the straight conveyor section shall have all the necessary items and ready to replace the existing section. vendors scope of supply includes, conveyor section assembled with side channels, conveyor tracks, flange ends at both ends, railing cum leg supports, railing angles, whmwpe wear pads fitted on the track, gaskets, anchor fasteners, m10 mounting bolt & nuts including chain complete in all respects including painting., divertors for t sections along with pneumatic cylinder and all the necessary fittings complete in all respect, twin arm stopper assembly. complete in all respects including pneumatic cylinders, rollers, all the necessary mountings, supporting legs and painting., uhmwpe wear pad for 90 degree bend section. side mounting wear pad for protection from chain slippage from the bend., uhmwpe wear pad for 90 degree bend section. wear pad for mounting on conveyor track of the 90 degree bend section., m10 x 35mm bolt nut washer set, counter weight set (left and right sided) along with mounting handle to be used for centrally located drive sections., skf bearing for drive units drive shaft with 65mm dia. model: yar - 213 - 2f, pneumatic pusher set. to be used for rejection line to push the cylinders from main line, complete in all respect including 50mm dia, stroke 400mm pneumatic cylinder, guide rod, pusher pad, all the necessary fittings, mounting plate and leg supports., freight and packing & forwarding charges, gst @ 18% for total amount of supply + freight charges

Central Government/Public Sector

CTN :40434481

30 May, 2025 NA

Delhi - Delhi

Tender For supply of 2024-25 (ami no.sn 219) cytocentrfuge specifications 1. the equipment should b e bench top centrifuge for cytology specimens. 2. it should be capable of thin layer cell preparation for retrieving cells from various body fluids & preserving their morphology. 3. it should be capable of proc essing up to minimum 8 specimens at one time. 4. it should be resistant to fluid spillage and also close d rotor, chambers for elimination of aerosol. 5. inbuilt safety alarms during all stages of operation shou ld be available. 6. microprocessor based controls & programming for time and speed 7. voltage requir ement : 220v, 50hz. 8. rpm should be 200-2000 9. cell block preparation system should be present in the system. 10. should have digital display for speed and time. 11. time window displays the program med and remaining run time from 1-99 minutes. 12. essential accessories like 200 filter cards. cyctocli ps, reusable funnels (10) etc to be supplied with the system. 13. document supporting track record an d satisfactory performance in govt./ semi %u2013 govt./ psu. total installations should be more than 50, and minimum 5 performance certificates from verified from govt./ semi %u2013 govt./ psu institu tes. 14. equipment should be us %u2013 fda, european ce and bis /iso approved. 15. two year warr anty should be provided for all components. 16. year wise breakup of cmc charges (for all components ) for a period of 5 years after completion of warranty period should be mentioned as per the following requirement: a) preventive maintenance visits 4 times in a year. b) breakdown calls as and when requi red. c) maximum response time: 2 days. d) maximum downtime: 3 days. e) in case of downtime excee ding beyond 72 hours, similar make & model backup/standby equipment using same inventory as the main equipment should be provided. f) list of items that are not covered under cmc should be provide d with their rates & periodicity or schedule of replacement. anything not mentioned in the list has to b e supplied free ]

Central Government/Public Sector

CTN :40434879

23 Jun, 2025 NA

Multi City - Multi State

Tender For running contract for supply, installation, testing and commissioning of high availability single section digital axle counter (hassdac) as per specification and detailed description provided b elow: - 1. high availability single section digital axle counter, phase-reversal type, complete set, havin g the 2dp-1sr configuration, as per rdso specification no. rdso/spn/177/2012 (ver.3) with the latest amendment and having the latest software, at the time of supply. 2.detail description of hassdac: - i. high availability single section digital axle counter (hassdac) phase reversal system with vr/pr box i ncluding relays, clamp with deflector plates and hardware, reset box having the auto-reset facility, dua l set of track sensor devices (tx coil/rx coil) for one track section suitable for 52kg & 60kg rails and all surge voltage protection and filter cards ii. all track sensors device (tx coil/rx coil) should be base cla mp type having 15-meter cable length. [ warranty period: 30 months after the date of delivery ]

Railway Track Item Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

corporations/Associations/Others

State Government

Central Government/Public Sector

Central Government/Public Sector