Latest rain water harvesting pit Tenders | Government rain water harvesting pit Tenders

Central Government/Public Sector

CTN :45295767

13 Jun, 2026 40.00 Lacs

Gurgaon - Haryana

Tender For ca no. ge af no.1/gur-23/2026-27 repairs and cleaning of sewage lines, man hole, drains, rain water harvesting pits, alongwith repairs to boundary wall, fencing and gate other miscellaneous works in the area of 27 ed and 31 mcu at af stn palam, under ge (p

Central Government/Public Sector

CTN :45265193

09 Jun, 2026 NA

Tiruchirappalli - Tamil Nadu

Tender For stationary storage type electric water heater (geyser) conforming to is 2082 : 2018 or latest with the following features: (a) working voltage : 230v ac(single phase supply, 50hz). (b) tank capacity : 15 liters. (c) material of outer container -abs. (d) mounting type : horizontal wall mounting type. (e) the product should be equipped with pressure safety relief valve as per clause 22: 103 of is 302-2-21 : 2018). (f) type of geyser : closed type. (g) double safety thermostat ( thermostat and automatic thermal cut-out). (h) multi function safety valve (i) the geyser should be supplied along with suitable inlet and outlet pipes. (j) the product should be isi marked. [ warranty period: 12 months after the date of delivery ] ]

State Government

CTN :45228629

02 Jun, 2026 1.89 Crore

Mansa-P - Punjab

Tender For construction of separate water works for village gobindpura to be bifurcated from existing water supply scheme achanak, block budhlada, distt. mansa (under nabard-xxxi) laying of pvc inlet channel of size 110 mm o/d (6kgf/sqcm) 4090 mtr, construction of rcc raw water sump cum pump chamber 4.75 mtr dia, storage & sedimentation tank av size 31.50 x 28.70 mtr, rcc suction cum scour well 2 mtr, pump chamber 6.10 x 4.88 mtr., rcc clear water tank 6.80 mtr dia, rcc ohsr 75 cum, site laying at head works, providing & installing pressure sand filteration plant of capacity 20 cum per hour , chlorination plant, pumping machinary including solar pannel, laying of di k-7 & pvc pipe line 4kgf/sqcm at head works, distribution system, installation of new house hold water connections without water meter & repair of existing water connections etc. and all other works contingent there to.

CTN :45261477

04 Jun, 2026 NA

Gwalior - Madhya Pradesh

Tender For supply of s cotton thread 165 dtex x6 black 500m , nylon rope , electrodes welding steel high tensile 2 , fuel injection pump gen set , injector nozzle gen set , hose non mettalic gen set , cock fuel tank gen set , piston ring set gen set , push rod gen set , gasket exhaust and inlet manifold gen set , drums metal galvanished h1 iron sheet with 5 , sr 998 , silencer gen set , piston assy cover size 1 106mm gen set , ring set piston standard over size gen set , connecting rod gen set , fuel pump assy complete gen set , bearing connecting rod std gen set , gasket kit gen set , pin gudgeon for piston set gen set

State Government

CTN :45275753

19 Jun, 2026 1.76 Crore

Rohtak - Haryana

Tender For construction of boosting station in bhutia pana near old chopal, raw water inlet channel and strengthening of existing s and s tank no.2, providing and laying distribution system

CTN :45045474

01 Jun, 2026 NA

Khorda - Odisha

Tender For corrigendum : supply of pipes and fittings for aircraft applications : : - pipe of size dia 50 , pipe of size dia 40 , pipe of size dia 20 , pipe of size dia 20 flexible , pipe of size dia 12 , rigid coupling , flexible coupling , pipe end sleeve , t joint , tank or bulk head flange , elbow , adapter , inlet bell mouth

CTN :45260704

30 May, 2026 NA

Siang - Arunachal Pradesh

Tender For supply of 006016642v91 pb lube oil filter 200100002120 , 1001caa12681n pre fuel filterelement , 006045564u01 main fuel filter cartridge , 006000789f1 pb air filter outer element , 006000790f1 pb air filter inner element , 006051126h01 fan belt 200100018646 , 0309cav00331n dosing control unit filter kit supply module , 006032997d1 filter pvc element , a 9389 111001 filter element hyd , 200100007111 hyd tank breather , n007 1245 o ring 124 x4 pt 5 9389 111004 , 444 466 filter for water pump section , l 030 051 cable stopper , 200100003568 seal kit for hydraulic cylinder da , 2911 000501 bleeding screw , 445 318 79 disc bush , 445 318 77 spring , 445 318 78 internal snap ring 9010 77 100 , 445 318 19 brake disc package 228 9160130084 , 200100003536 tie rod 228 9538 040 007 , 101040520126 fuel hose , 101040520128 fuel hose , 101040520127 fuel hose , 101040000922 inching cable , l 033 039 fixed accelerator cable , 101100000081 roc intel hose e2 , 101100000840 cac inlet hose alk e2 , l 010 117 engine coupling , a 445 271 brake master cylinder male , 411 409 brake hose , 411 435 brake hose , l 042 675 hydraulic hose assembly , 200100005704 single solenoid dc , 200100005702 valve double solenoid operated dc , 200100001854 loading arm cylinder seal kit , l 301 002 seal kit for steering unit , 200100003954 head lamp , l064 373 tail lamp lh , 101100000948 tail lamp assy rh , 101100001216 101100003786 tail lamp assy lh , 101100010883 101040000920 accelerator cable , 101100010609 101040500236 hydraulic hose assembly , 200100006894 deep groove ball bearing 6409 rs ) /bid number : gem/2026/b/7557072 * /dated: 20-05-2026 & & / bid document 1 / 30

CTN :45228398

30 May, 2026 NA

Birbhum - West Bengal

Tender For procurement of bottom ash and wet ash spares for overhauling of unit 3 under ahp mm - nozzle for air washer (dry for fly ash system size: 5 mm dia,for ahp-ii, nozzle with insert # tip dia 9 mm of insert,moc-ss 410 (nozzle),ceramic,hardness 7708 mohs,ahp-i# for 10in wetting head,make-dcips,pn-6,7, inlet section fr wetting head10" of ahpi ( one side bevelled and others side plain (b/p),after 90 degree 10" elbow for wetting head. moc: durite 450bhn ), adaptor for collector tank ( one side bevelled and others side flanged with holes. mat: durite 450bhn ), adapter b/b # for ahp-i,below wetting head# for collection tank ( both sides bevelled. mat: durite 450bhn ), tail piece after combining tube,ahp-ifor ba slurry line,make-dcips ( one side bevelled and others side plain (b/p),after combining tube. moc: durite 550bhn ), complete assembly of jet pulsion p/p moc: durite 550 bhn for body,ss-410 for nozzle tip,ceramic 7 moh min for nozzle insert,cap.-60 t/h,pr.-10 kg/cm2 for ahp-i, combining tube # dcips make-dcips,part no.-1,moc: durite,550 bhn,for ahp-i ( hydrostatic test pressure at shop: 9 kg per sq cm (g). ), drain pit jet pump,ejector type # complete assy with water inlet elbow,pipe with flange,bolts and nuts and foundation bolts ( discharge rate of 35 # 50 cubic mtrs. / hour, horizontal distance of 150 # 160 mtrs with an elevation of 10 mtrs from gound level (0.00 mtrs), sump volume : 45 cubic mtrs. one no. orifice for discharge line with each of ejector jet pump is required with other accessories. ), ba hopper,feed sump/chute for bottom ash hopper, nozzle # of seal trough,for ba hopper,ahp-i# for ba hopper,ahp-i ( nozzle with holder. ), inspection window assembly looking glass dia 224 mm th 12 mm for ahp-ifor ba hopper, inspection window glass,200m # ( moc: borosilicate glass. ), shaft sleeve for clinker grinder for make-ucc/dcips,pno. 15 moc ss 410, 350 bhn, for ahp-i, cambolt,nut,locknut # moc-ss 410(cambolt) heat treated to rc 32-34,metric m 20 coarse a2-70,is 1363 (nut# for ba clinker grinder ( 1set=32 nos 1. moc: ss-420 (cam bolt) heat treated to rc 32-34. metric m20 coarse a2-70, is 1363 (nut). 2. 01 set: ), packing gland follower # moc: bronze ltb-2 is 318,for ahp-1 ( for ba excen crusher 1. part no.-12 2. moc: bronze, ltb:2 is:318 ), labyrinth ring of bearing housing moc-ms is 2062,for ahp-ifor clinker grinder,make-dcips ( for ba excen crusher 1. part no.-13 2. moc: ms is 2062 gr-a. ), chain # no of link-118,for ahp-i ( for clinker grinder of ahp-i. no of link: 118. ), small size sprocket for ahp-1 bktpp for gear box,for ahp-i, packing gland housing # moc: ci fg 220 is: 210,for ahp-i ( for ba excen crusher 1. part no.-9 2. moc: ci fg 220 is: 210. ), slinger for bottom ash crusher dcips moc-ms,is:2062 gr-a,drawing no 25p06-t-1b-582 ( for ba excen crusher 1. part no.-14 2. moc: ms is 2062 gr-a. ), cam for clinker grinder # heat treated & normalised for ahp-i# for moc:hi chrome alloy with 22% to 27% cr, gate face of feed gate # moc-ss 316 for ahp-i ( moc: ss - 316. including m12x65, csk hd soc. cap bolt, nut, washer. ), adjustable seating wedge # moc-ms,is:2062 gr-a for-ahp-i ( for feed gate. moc: ms, is: 2062 gr a. ), roller # moc-steel.is:1030 for-ahp-i ( for feed gate of ba crusher. moc: steel, is: 1030. ), gland follower for indicator rod dcips of feed gate, ahp-i, guide angle l.h # moc-ms,is:2062 gr-a for-ahp-i ( for feed gate ), guide angle r.h # moc-ms,is:2062 gr-a for-ahp-i ( for feed gate ), indicator rod # moc-s.s,size: 21mm dia.(solid) and 1400 mm long with both ends threaded and nuts,stg-i# for bottom ash hopper feed gate

CTN :45259042

04 Jun, 2026 7.39 Lacs

Multi City - Andhra Pradesh

Tender For providing gravel road from daida major canal to duba cheruvu (ss tank) inlet of gurazala nagar panchayat.

Central Government/Public Sector

CTN :45247327

10 Jun, 2026 30.00 Lacs

Gurgaon - Haryana

Tender For ca no. ge af no.1 / gur-11 / 2026-27 repairs to drain ,hard standing, boundary wall, fencing/gate and rain water harvesting pits in sekhon vihar area at under ge (af) gurgaon no1.

Rain Water Harvesting Pit Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

State Government

State Government

Central Government/Public Sector