Latest raw coal feeder Tenders | Government raw coal feeder Tenders

Central Government/Public Sector

CTN :45731013

07 Jul, 2026 NA

Kapurthala - Punjab

Tender For supply of feeder juction box for bangladesh coaches, as per drawing: edml261, rev. 1, packing instruction: alternator,rru, erru &accessories, transformer,bulk inverters , battery, charger, self priming monoblock pump, inverter, change over control box etc: suitably covered with biodegradable transparent polythene and packed in wooden cage: bottom frame to be made of wooden planks 20mm thick &should have support of at least 3 wooden battons of size 100x100mm of suitable length to facilitate lifting by fork lifter. each panel to be packed in wooden cage of suitable dimensions made out of wooden strips of 20x100mm size. gap between each strip should not be more then 100mm. the material used for product packaging shall be eco-friendly.a list should be pasted on each wooden cage showing order no, pl no, description of the item, drg. no/ spec. no ,qty, firm's name &address and date of despatch etc. note-1.the item &its packing shall carry a qr code(optional) containing thedetails as listed below (qr code(optional) to be affixed near name plate of item &on top ofpacking) a)name of the manufacturer b)purchaseorder number c)purchaseorder date d)uniqueserial number (or lot number for bulk items) of the manufacturer or e)dateof manufacture f)deliverychallan no. g)deliverychallan date 2.the qr code(optional) shall be as per iso/iec 18004 model2 and the data shall be available as xml using the tags detailed above. 3.in case the above details are not available, or the qr code(optional)s are not readable, the supplied material is liable to be rejected. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

State Government

CTN :45738705

21 Jul, 2026 NA

Ukai - Gujarat

Tender For supply of gland pecking for wb , element gasket for wb , warm gear 30 teeth for wb , warm shaft wb , spur gear 12 teeth for wb , rack pinion for wb , warm stl 03 for wb , warm lh stl 02 for wb , spur gear shaft for wb , secondary shaft for wb , primary shaft for wb , primary gear for wb , worm gear for wb , worm gear l.h. for wb , spur gear for wb , key for wb , oil seal for wb - 1e for wb , motor gasket for wb , cover gasket for wb , gasket for wb , oil seal for wb , element gear for wb , chain connector of traveling chain carriage assy , oil gun removal part j for oil gun type , spary plate.90j28 for oil gun type , copper clad asbest gasket , set of gear and pinion assembly for gc feeder inlet gate * /bid number : gem/2026/b/7644559 + /dated: 30-06-2026 ' ' / bid document 1 / 29

CTN :45358224

14 Jul, 2026 11.40 Lacs

Kota - Rajasthan

Tender For corrigendum : tn-25151 supply of miscellaneous rubber items at kstps, kota. - "white rubber insertion sheet made from superior quality natural/ synthetic/ blend rubber free from surface defects, porosity and grit conforming to is6381/1979. the reinforcement fabric used for white rubber insertion sheet should with stand minimum area", 3.0 mm , 5.0 mm, love-joy spider set in following sizes:, l-50, l-70, l-75, l-90, l- 95, l- 100, l - 110, l - 150, l-190, l-99/100, l-225, l-226, l-276, soft seal for 600 nb b/f valve make-m/s i/l ltd. od-577, id-522 mm.pcd-548 mm. hole dia 9 mm. no. of hole-20 th-10.0 mm. material- nitrile rubber shore hardness 60 + 5 on 'a' scale. , nitrile rubber gasket for 300 nbci/ ms pipe single side tapered id-320, od-345, h-10/28, th-4/12.5 mm. , nitrile rubber gasket for 150 nb wet slurry line single side tapered id-166 mm. od-190 mm. h-22/35 th-5/12 mm. , rubber coupling bush for sump drain pump id=22 mm, od=38, l=40 mm, rubber pad for love joy coupling c-280 , victaulic coupling rubber gasket -18l, victaulic coupling rubber gasket -18h, "victaulic coupling rubber gasket -20l", victaulic coupling rubber gasket -20h, seal kit set 3/8" 3way solenoid valves as per sample one set contains 6 pieces, vibration damping rubber pads/block for stacker reclaimer#1 size od=210 to 200(tapper).length=125 mm centre hole dia.=85 mm (sample piece available at site), neoprene rubber coupling pad size 40x40x20 mm, neoprene rubber brush size (idxodxlength ), 20x38x40, 32x50x55, 35x55x60, rubber cushion pad c-280, tyre coupling tc-011, tyre coupling tc-019, tyre coupling tc-013, rubberized cork sheets confirming to is :4253 pt-ii of 1980 rc-70c grade size of sheet :915x610x2.00 mm, rubberized cork sheets confirming to is :4253 pt-ii of 1980 rc-70c grade size of sheet :915x610x4.00 mm, rubberized cork sheets confirming to is :4253 pt-ii of 1980 rc-70c grade size of sheet :915x610x6.00 mm, rubberized cork sheets confirming to is :4253 pt-ii of 1980 rc-70c grade size of sheet :915x610x8.00 mm, dresser coupling rubber gasket for16'' for feed pipe, dresser coupling rubber gasket for36'' for coal valve gate raw coal feeder, gun metal rubber bush for feeder drive nitrile rubber gun metal bush id 22.5mm ,od 32mm,length 40 mm rubber bush od 44.5 mm ,length 40 mm, rock well coupling gasket 20l, enddoor gasket for stg-i (1 set consisting 2 nos. rare and 2 nos.front ), enddoor gasket for stg.-ii,iii,iv,v consisting (2 nos. rare and 2 nos.front ), rubber spider set :, sw-rrs 190/140, sw-190, rubber coupling bush for fd/pa fans of stage-i as per drawing , rubber coupling bush for fd/pa fans of stg-ii as drawing, rubber coupling bush for fd/pa fans of stg- iv/v as drawing, rubber gromet gasket for id/pa fans as per drawing u#3 to 7, victaulic coupling rubber gasket size 22l made of silicon rubber for pf pipe of u#5, 6&7. tech. specs: max. temp. 160-180 degree. a industrial grade scale, soft seal for 400 nb b/f valve make-m/s i/l ltd. od-357, id-307 mm. pcd-323 mm. hole dia 8 mm. no. of hole-16 th-9.0 mm. material- nitrile rubber shore hardness 60 + 5 on 'a' scale. , rubber pad for love joy coupling swq-280/140

CTN :45733165

07 Jul, 2026 NA

Multi City - West Bengal

Tender For auction sale of depot non ferrous scrap - lot no.p.nfa-1.bin no- 2/a ,7/a & ground floor at near bin -37.exmp.06.2026-27.03 description- scrap aluminium with iron attachment, and other aluminium casting, field coil, lamp caps, aluminium boring etc. our offer: a) scrap aluminium with or without iron attachment. such as- scrap aluminium cylinder for tap changer, aluminium number plate, aluminium feeder wire, steady arm, anti wind clamp, wiper motor, bus bar connector (aluminium), part of filter element of emu motor coaches, compressor & air dryer spares, horn, gauge cover, piston sub assembly, and other aluminium misc.as in the lot which are kept in bin no-2/a & ground floor of near bin 37. qty= 1929 kgs. b) scrap aluminium rear & front cover with or without rubber and grease attachment. in bin no- 7/a . qty- 2462 kgs. loading will be done by purchaser's own arrangment.

CTN :45298008

01 Jul, 2026 NA

Parganas - West Bengal

Tender For bid to ras supply of xlpe cable for working voltage up to and including 1.1 kv marked to is 7098 (part 1) (q2) , miniature circuit breakers (mcb) for ac operation marked to is/iec 60898 (part 1) (q2) , supply and fixing on load change over switch ss enclosure complete with capacity 200 amp, 415 volt, 4 pole, 50 hz. , supply and fixing sheet metal enclosure spn db double door having facility to fix mcb spn as incomer and mcbs as outgoing, spn 4 ways, ip-43 , supply and fixing sheet metal enclosure tpn db double door having facility to fix mcb tpn as incommer and mcbs as outgoing tpn 4 ways, ip-43 , supply and fixing bus bar chamber 100 amp, 4 way, 415 volts enclosurre is made from crca sheet of thickness 3.15mm crca sheet cover , supply and fixing of straight through epoxy cable joint kit incl jointing materials making joints of ug electric cable 1100 v grade nominal cross sectional area not exc.50 sqmm, 3.5 by 4 core , supply and fixing straight through epoxy cable joint kit incl jointing materials making joints of ug electric cable 1100 v grade cross sectional area 240 sqmm to 300 sqmm, 3.5 core. , supply and fixing end termination epoxy cable joint kit including jointing materials for making joints of ug electric cable 1100 v grade nominal cross sectional area 240 sqmm to 300 sqmm, 3.5 core , supply and fixing of galvanised iron pipe 100 mm bore dia light grade for protection of ug cable , supply of digging nad layingg in excavation trenches not exc. 1.50 m wide and not exc. 1.50 m in depth, complete all as specified and directed. , returning, filling in including spreading, levelling, watering and well ramming in layers not exc. 250 mm in soft loose soil , supply and fixing of galvanised iron pipe 40 mm bore dia light grade for protection of ug cable , supply, installation, commissioning and testing including providing all necessary electrical connection,lt feeder panel board of size 1.0 m x 0.6 m x ) /bid number : gem/2026/b/7568567 * /dated: 22-05-2026 & & / bid document 1 / 30 & & ' ' /item category 0.5 m , supply, installation, commissioning and testing including providing all necessary electrical connections lt feeder panel board of size 0.6 m x 0.6 m x 0.5 m , supply and fixing earhing complete with gi earth plate electrode of size 600x600x6mm thick.complete all as specified and directed in boq spec file , supply and fixing earhing complete with gi earth plate electrode of size 600x600x6mm thick. complete all as specified and directed in boq spec file , supply and fixing of sub-class b brick, well burnt, laid breadth-wise along the axis of cable laid in trenches over sand cushion laid for ug cable protection, complete all as specified and directed. , supply and fixing horizontal boring under a depth of 0.65 m from the gl for passing pipe upto 40 mm bore dia , supply of digging and laying of removing excavated materials soils not exc. 50 m and depositing where directed at a level not exc.1.50 m , taking down out unserviceable or serviceable lt ug cables of nominal cross-sectional area 300 sqmm including bricks, gi pipes etc. , taking down out unserviceable or serviceable lt ug cables of nominal cross-sectional area 50 sqmm 3.5 core including bricks, gi pipes etc. , supply of digging and laying of sand cushioning dry in trenches for protection of ug cables below, above and around the ug cable laid in trenches of 230 mm spread thickness , cutting road by hard standing and making good disturbed surfaces by using pcc type-c2,1-3-6 by using 40 mm graded stone aggregate , boring of holes under road,pavement,hard standing by trenchless technology using ultra sounding technique including hdpe pipe 150 mm dia suitable for 0.4 mpa working pressure , cutting chases, chipping in making good to facings, where required and pointing in cement mortar 1- 3 to ends or edges of landings, steps, sills, sunshades, shelves, lintels etc. , submain wiring comprising single core 2 runs of 6 sqmm nominal coss sectional area frlh

State Government

CTN :45700082

16 Jul, 2026 NA

Nashik - Maharashtra

Tender For annual maintenance contract for pm, poh & coh of bhel make coal mills xrp-763 & raw coal feeder in unit no 3, 4 & 5 at ntps.

Central Government/Public Sector

CTN :45702702

01 Jul, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot ferrous scrap - p.l. no. 98090719. stainless steel scrap consisting of condemned and unserviceable plain / trough floor / chequered sheets , lavatory pans , pipes / pipe fittings , weld mesh , lavatory inlays , wash basins, dust bins , mugs with / without ferrous chains , mirror frames , wall protectors , liquid soap containers , soap tray , foot step assembly , ratchet assembly ,feeder junction box,el boxes, switch plate cover , shelf below mirror, , commode chute support brackets , hot box , berth supports , adopter for commode , nose plates , fuse boxes , handles , rods, flats , rmpu spares , blowers , accumulator for rmpu coach with / without original non ferrous attachments , chairs ,bottle holders, vessels / utensils , security plates , dressing vessels , and similar items used in canteen / hospital. of sorts and sizes with / without ferrous/ non ferrous/ fibre/rubber ,other original attachments and similar items stainless steel in nature. as is where is basis. segregation and removal of attachments not permitted. note:- cssd / goc electronic weigh bridge to be used for weighment.

corporations/Associations/Others

CTN :45676412

02 Jul, 2026 7.71 Crore

Kolkata - West Bengal

Tender For centralized rate contract for two years for supply of various types of spare parts of ms elecon engg. company limited for chp of different plants of dvc. - dowel, part no.-30, type: k2 gear unit, make: elecon engg. co. ltd., drain plug, part no.-45, type: k2 gear unit, make: elecon engg. co. ltd., breather plug, part no.-56, type: k2 gear unit, make: elecon engg. co. ltd., input pinion shaft, part no.-102, type: k2 gear unit, make: elecon engg. co. ltd., input extension key, part no.-107, type: k2 gear unit, make: elecon engg. co. ltd., locknut, part no.-110, type: k2 gear unit, make: elecon engg. co. ltd., lock washer, part no.-111, type: k2 gear unit, make: elecon engg. co. ltd., flanged bush, part no.-120, type: k2 gear unit, make: elecon engg. co. ltd., oil seal, part no.-132, type: k2 gear unit, make: elecon engg. co. ltd., output shaft, part no.-202, type: k2 gear unit, make: elecon engg. co. ltd., output gear, part no.-203, type: k2 gear unit, make: elecon engg. co. ltd., key, part no.-206, type: k2 gear unit, make: elecon engg. co. ltd., oil seal, part no.-232, type: k2 gear unit, make: elecon engg. co. ltd., intermediate pinion shaft, part no.-302, type: k2 gear unit, make: elecon engg. co. ltd., intermediate gear, part no.-303, type: k2 gear unit, make: elecon engg. co. ltd., key, part no.-306, type: k2 gear unit, make: elecon engg. co. ltd., roller assembly r-800 drg no- r00673/3, for paddle feeder m/c no. 27-30, make-elecon, roller assembly r-600 drg no- r00686/3 , for paddle feeder m/c no.-27-30,make-elecon, geared coupling ed500, propeller shaft series 1600mm part-m08244/1 for paddle feeder m/c no- 27-30, make-elecon, paddle shaft 88diax477 lg part-m13004/4 for paddle feeder m/c. no.-27-30, make-elecon, paddle shaft 88diax812lg part-m13006/4 for faddle feeder m/c no.-20-30, make elecon, coupling for propeller shaft part-m13005/4 for paddle feeder m/c no.- 27-30, make elecon, wheel drive parto-m11031/3 for paddle feeder m/c no. pf-27-30 , make - elecon, keeper plate part-m08596/4 for paddle feeder m/c no.- 27-30, make - elecon, spacer for bearing 89.8/80diax27thk for paddle feeder m/c no- 27-30, make -elecon, cover for bearing 130diax14 thk for paddle feeder m/c no. 27-30, make-elecon, plain wheel dia 160/90x85thk for paddle feeder m/c no.- 27-30, make - elecon, spindle 40 diax210lg part-m08594/4 for paddle feeder m/c no.- 27-30, make - elecon, deep groove ball bearing single row , part no.- m08593/3 for paddle feeder m/c no.- 27-30, make -elecon, filter return line for hydraulic system of paddle feeder pressure relief valve for hydraulic system of paddle feeder, spring, drg. no. m02728/4spare for vibrating feeder,spring, drg. no. m02728/4spare for vibrating feeder, paddle hub with arm, part no. m08456/2 (spares for paddle feeder plough drive assembly of elecon make paddle feeder, m/c no. pf: 27-30), locking plate(spare for paddle drive assy.), locking assy. d0b1kon1012140x190 for paddle drive assy., ci cast housing for extra bearing housing (spare for paddle drive assy. of paddle feeder), spacer 75 od x 55 id x 48 lg (for paddle drive assy.), spacer part no. m13062/4(for travel drive assy.), torque arm for travel drive, spacer part no. m13007/4(for travel drive assy.), boss p no. dc0269414, deep groove type ball bearing (for spacer for d.s. trolley), nylon ring 3thk 125od x80 id for spare of ds trolly assy., pin 80 dia x 235 lg(spare for ds trolly assy.), cover 20/80 dia x 20 thick(spare for ds trolly assy), wheel dia 315 mm(spare for ds trolly assy.), drive gear box (type-c082111)make;pbl without electric motor for ilms, planetary gearbox input sun pinion for elecon make planetary gear box type and size pav 45 ratio-5:1, planetary gearbox set of oil seal for elecon make planetary gear box type and size pav 45 ratio-5:1, annulus (part no.5), of planetary gearbox type:pav-45, ref drg no.7741891/3, planet bolt (part no.8) of planetary gearbox type:pav-45, ref drg no.7741891/3, planet carrier cum output shaft(part n

CTN :45693782

13 Jul, 2026 73.10 Lacs

Bhiwani - Haryana

Tender For supply ere commi of various electromechanical equipment like 5 no 5 cs vt pump electric motors starter panel and other allied material for flood protection works from the field area of village dang khurd outfall at rd 65000r of nigana feeder - supply, erection & commissioning of 5 c/s axial/mix flow water lubricated vertical flood pumps of 5 cs. discharge at 1440 rpm at static head of approx 6.0 mtr. having adjustable height, including ms bend including flange welding, ss/ht nut & bolts etc complete in all respect as per site requirement with epoxy coating & as per approved specifications of the department, supply, erection & commissioning of solid shaft motor of capacity 30 hp, 1440 rpm, 3 phase, 380 volt+- 10%, with eficiency class ie2 (with 35 mtr compatible 3 phase submersible cu cable from motor to panel/starter) suitable for fitment with 5 cs. v.t axial/mix flow pump type vertical flange mounted as per approved specifications of the department., supply, erection & commissioning of fully automatic star delta starter of cap. 150 amp including all accessories as one incomer of mccb (150amp) with 1 no mcb for lighting load, contactor rating 120 amp, 90 amp, 70 amp with control transformer for control supply, outgoing indicator, having mpr & all types of protections i.e.uv/ov/ over current, phase imbalance/phase reversal protection, locked rotor, dry run etc, digital meters, push buttons, bus bars, capacitor bank, seperate relay for single phase protection etc. complete in all respect suitable for open fields operation of 1 no. motor of capacity of 30 hp with a stand of ms channel with canopy having suitable operating height above the kachha open fields as per approved specifications of the department. (suitable for voltage range 380 +- 10%,) panel should be outdoor type., supply, erection & commissioning of m.s delivery pipe 10" dia. made of ms plate both end flanged (equal to or less than 6 mtr length of pipe) as per approved specification & make. (including ss/ht nut & bolt, rubber packing & other fitment accessory required), supply, erection and commissioning of ms girder parallel flange section ismb 150 with primer and bituminous based paint inside & outside of length 4mtr (approx wt 60 kg per pc) as per approved make & conforming to is808:2021.

CTN :45693784

13 Jul, 2026 45.63 Lacs

Bhiwani - Haryana

Tender For supply erec comm of various electromechanical equipment like 3 no 5 cs vt pump electric motors starter panel and other allied material for flood protection works from the field area of village ghuskani outfall at rd8350 l of nigana feeder - supply, erection & commissioning of 5 c/s axial/mix flow water lubricated vertical flood pumps of 5 cs. discharge at 1440 rpm at static head of approx 6.0 mtr. having adjustable height, including ms bend including flange welding, ss/ht nut & bolts etc complete in all respect as per site requirement with epoxy coating & as per approved specifications of the department, supply, erection & commissioning of solid shaft motor of capacity 30 hp, 1440 rpm, 3 phase, 380 volt+- 10%, with eficiency class ie2 (with 35 mtr compatible 3 phase submersible cu cable from motor to panel/starter) suitable for fitment with 5 cs. v.t axial/mix flow pump type vertical flange mounted as per approved specifications of the department., supply, erection & commissioning of fully automatic star delta starter of cap. 150 amp including all accessories as one incomer of mccb (150amp) with 1 no mcb for lighting load, contactor rating 120 amp, 90 amp, 70 amp with control transformer for control supply, outgoing indicator, having mpr & all types of protections i.e.uv/ov/ over current, phase imbalance/phase reversal protection, locked rotor, dry run etc, digital meters, push buttons, bus bars, capacitor bank, seperate relay for single phase protection etc. complete in all respect suitable for open fields operation of 1 no. motor of capacity of 30 hp with a stand of ms channel with canopy having suitable operating height above the kachha open fields as per approved specifications of the department. (suitable for voltage range 380 +- 10%,) panel should be outdoor type, supply, erection & commissioning of m.s delivery pipe 10" dia. made of ms plate both end flanged (equal to or less than 6 mtr length of pipe) as per approved specification & make. (including ss/ht nut & bolt, rubber packing & other fitment accessory required), supply, erection and commissioning of ms girder parallel flange section ismb 150 with primer and bituminous based paint inside & outside of length 4mtr (approx wt 60 kg per pc) as per approved make & conforming to is808:2021.

Raw Coal Feeder Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

State Government

Central Government/Public Sector

corporations/Associations/Others