Latest raychem termination kit Tenders | Government raychem termination kit Tenders

State Government

CTN :45367498

19 Jun, 2026 NA

Delhi - Delhi

Tender For providing of custom bid for services - addition & alteration construction of bio-chemistry lab at second floor. - dismantaling and disposal work; (a) first floor roof existing fibre sheet removal and disposal (16x5)feet , (b)second floor(bio chemistry) existing brick wall 9" th. dismantling and disposal , ( c) existing window removal (6x4'-6") , (d) existing floor dismantling and disposal , " 6.4.1 brick work with common burnt clay f.p.s (non modular) bricks of class designetion 7.5 in superstructure above plint level in all shapes and sizes in cement mortar1:6(1cement 6 coarse sand) " , plaster inside 12mm with 1: 6 ratio with fine sand , external plaster 15mm 1 :4 ratio 18mm cement plaster in two coats under layer 12 mm thick cement plaster1:5 ( 1cement :5 coarse sand ) and a top layer 6mm thick plaster , providing and laying reinforcement work , providing and laying rienforce cement concrete in retaining walls including attatched pilasters, colmns,piers,abutments pillars,posts,struts,buttresses,string,or lacing courses,parapets,coping,bed blocks,anchor blocks window sills ,fillllets,sunken floor etc.up to floor five level ,excluding the cost of centering ,shuttering ,reinforcement and finishing (5.2.2) , floor and roof protection work ;(4.20a.2.2) concrete of m15grade with minimum cement content 240kg/cum , 11.49.2 floor tiles; providing and laying full body vitrifiedtile in floor of minimum thickness 15mm with water absorption less than 0.06% and confirming to is:15622,of approved make, brand and manufacturer.laid on 20 mm thick cement mortar 1:4 . including grouting the joints with white cement /matching grout size600x600 , skirting , structural steel work welded in built up sections /framed work including cutting ,hoisting ,fixing in position and applying a priming coat of approved steel primer using structural steel .(250x125) , "red stone for slab providing sand stone slab for roofing and laying them in cement mortar1:4 ( 1 cement : 4 coarse sand ) over wooden karris or rcc battens or structural steel section (karries or battens or or structural steel. " , providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying: , counter slab stone work , 8.2.2 . providing and fixing 18mm thick gang saw cut mirror polished, premoulded and prepolished,machine cut for kitchen platforms ,vanity counters,window sills ,facias and similar locations of required size approved shade ,colour and texture laid over20 mmthick base cement mortar, joint treated with white cement mixed matching pigment,including rubbing curing ,moulding and polishing of edges excluding hosting and transportation , counterslab stone skirting , providing edge moulding to 18 mm thick marble/granite stone counter,vanities etc. , p\ fteak wood frame ,providing wood work in frames of doors windows and other frames wrought framed and fixed in position with hold fast lugs or with dash fasterners of requireddia and length( hold fastlugs or dash fastenershall be paid for separetely. , p\f flush door , providing and fixing is markedflush door shutters confirming to is ;22029 part 1) non decorative type core of construction with frame of first class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters (9.21.1) 35 mm thick including isi markedsteel but hinges with necessary screws , fixing of aluminium window with all necessary at site available at site , providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. , distempering with 1st quality acrylic distemper (ready mixed) having voc content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour : , finishing walls with acrylic smooth exterior

CTN :45367757

19 Jun, 2026 NA

Gandhinagar - Gujarat

Tender For supply of grade 20 amp , ht fuse element 11 kva voltage grade 30 amp , lt 1 point 1 kv 1100 volts cold shrink indoor type cable end joint 35 to 95 sqmm , lt 1 point 1 kv 1100 volts cold shrink outdoor type cable end joint 35 to 95 sqmm , ht 11 kv cold shrink cable end indoor termination bushing boot of right angle 35 to 50 sqmm , lt xlpe cable 95 sqmm 3 point 5 core aluminium armoured , lugs aluminium pin type 25 sqmm , lugs aluminium pin type 35 sqmm , lugs aluminium u type 25 sqmm size , lugs aluminium u type 50 sqmm size , lugs copper ring type 10 sqmm size , lugs copper ring type 16 sqmm size , lugs copper u type 10 sqmm size , lugs copper u type 16 sqmm size , poly electrolyte , cable pvc frlsh copper twin core 4 sqmm , spn db box 2 way , steel screw half inch long 6 mm dia packet of 100 nos , steel screw 15 mm long packet of 100 nos , steel screw 2 inch long 6 mm dia packet of 100 nos , steel screw 20 mm long packet of 100 nos , steel screw 25 mm long packet of 100 nos , screw wood 4 to 6 m dia 25 mm long packet of 100 nos , screw wood 4 to 6 m dia 20 mm long packet of 100 nos , mcb db spn 8way , mccb 4 pole 25ka 63 amp , modular socket 20 amp twin socket , socket 16 amp flush type , socket 6 amp flush type , ht 11 kv cold shrink cable end indoor termination bushing boot of right angle 70 to 95 sqmm , ht11 kv cold shrink indoor type cable end joint 95 sqmm , ht11 kv cold shrink outdoor type cable end joint 95 sqmm , ht 11 kv cold shrink straight through joint 95 sqmm , ht fuse element 11 kv voltage grade 10 amp , ht fuse element 11 kv voltage grade 5 amp , ht fuse element 11 kv voltage grade 50 amp , pvc tape roll 40 mm , spn db box 4 way , lt 1100 volts cold shrink straight through cable joint 95 sqmm , lugs copper ring type 4 sqmm size , lugs copper ring type 6 sqmm size , lugs copper u type 4 sqmm size , lugs copper pin type 1 point 5 sqmm size , lugs copper pin type 4 sqmm size , lugs copper pin type 6 sqmm size , lugs copper ring type 1 point 5 sqmm size , lugs copper ring type 2 point 5 sqmm size , lugs copper u type 2 point 5 sqmm size , lugs copper u type 6 sqmm size , pvc tape roll 10 mm width , pvc tape roll 15 mm width , bulk head fitting 12 watt , coolant ready mix ratio 1 ratio 4

State Government

CTN :45374186

09 Jun, 2026 NA

Multi City - Multi State

Tender For supply of terminal ends for aluminium conductors of insulated cables (compression cable lugs) conforming to is 8309

State Government

CTN :45360461

15 Jun, 2026 11.51 Lacs

Garhwal - Uttarakhand

Tender For supply of decentralized material and installation of 33kv isolator - material, 33 kv isolator vertical type, labour, fabrication of steel, inst. of danger board/number plate, installation / fixing of 33 kv isolator, fixing of aluminium lugs

State Government

CTN :45360462

15 Jun, 2026 14.78 Lacs

Garhwal - Uttarakhand

Tender For supply of decentralized material and installation of 11kv isolator under edd pauri - material, 11 kv vertical type isolator, labour, fabrication of steel, inst. of danger board/number plate, erection 11kv off-load isolator for fdr, fixing of aluminium lugs

Central Government/Public Sector

CTN :45365822

19 Jun, 2026 39.99 Lacs

Bikaner - Rajasthan

Tender For repair to security lights panels dg sets fire alarm ups with covered items at af stn bikaner under ge (af) nal - excavation in trenches in soft/loose soil not exceeding 1.5 mtr wide and not exceeding 1.5m depth, getting out the excavated earth, forming bottom surfaces to required gradient complete all as specified and directed by engineer-in-charge., removal of excavated material soils to a distance n exc 50 m and depositing where directed at a level not exceeding 1.5m above the startly point complete all as specified and directed., returning filling in, including spreading, levelling watering and well ramming in layers n exc 25 cm as in any type of soil complete all as specified and directed., material and labour for sand cushioning using dry and clean tibba sand in two layers, first layers of 80mm thick before laying of cable and second layer of 150mm thick after laying of cable in trenches/ducts including consolidation of each layers complete all as specified and directed. note : punned thickness shall be measured for payment., material and labour for un-reinforced pre-cast concrete cable covers, class lv type-1, flat size 250mm x 150mm x 40mm thick complete all as specified and directed., taking out defective cable xlpe/pvc sheathed 1100 volt grade heavy duty armoured with aluminum conductor 2 core, 6 sqmm from trenches complete all as specified and directed.note : excavation and earth work shall be measured and paid for separately under relevant item, taking out defective cable xlpe/pvc sheathed 1100 volt grade heavy duty armoured with aluminum conductor 2 core, 10 sqmm from trenches complete all as specified and directed.note : excavation and earth work shall be measured and paid for separately under relevant item, taking out defective cable xlpe/pvc sheathed 1100 volt grade heavy duty armoured with aluminum conductor 4 core, 16 sqmm from trenches complete all as specified and directed.note : excavation and earth work shall be measured and paid for separately under relevant item, taking out defective cable xlpe/pvc sheathed 1100 volt grade heavy duty armoured with aluminum conductor 3.5 core, 25 sqmm from trenches complete all as specified and directed.note : excavation and earth work shall be measured and paid for separately under relevant item, taking out defective cable xlpe/pvc sheathed 1100 volt grade heavy duty armoured with aluminum conductor 3.5 core, 35 sqmm from trenches complete all as specified and directed.note : excavation and earth work shall be measured and paid for separately under relevant item, taking out defective cable xlpe/pvc sheathed 1100 volt grade heavy duty armoured with aluminum conductor 3.5 core, 50 sqmm from trenches complete all as specified and directed.note : excavation and earth work shall be measured and paid for separately under relevant item, supplying, laying, jointing and testing of under ground cable xlpe insulated, 1100 volt grade heavy duty armoured with stranded aluminium conductor 2 core 6 sqmm laid in trenches/duct/pipe including all electrical connection with required lugs and nuts, bolts complete all as specified and directed by engineer-in-charge , supplying, laying, jointing and testing of under ground cable xlpe insulated, 1100 volt grade heavy duty armoured with stranded aluminium conductor 2 core 10 sqmm laid in trenches/duct/pipe including all electrical connection with required lugs and nuts, bolts complete all as specified and directed by engineer-in-charge, supplying, laying, jointing and testing of under ground cable xlpe insulated, 1100 volt grade heavy duty armoured with stranded aluminium conductor 4 core 16 sqmmlaid in trenches/duct/pipe including all electrical connection with required lugs and nuts, bolts complete all as specified and directed by engineer-in-charge, supplying, laying, jointing and testing of under ground cable xlpe insulated, 1100 volt grade heavy duty armoured with stranded aluminium conductor 3.5 core 25 sqmm laid in trenches/duct/pipe inc

CTN :45357233

08 Jun, 2026 3.50 Lacs

Imphal - Manipur

Tender For supply of lightning conductor : : - lighting conductor , earthing electrode , copper prongs , copper ball , aluminium rod , pvc insulated cover , insulated clamp , pvc conduit pipe , aluminium strip , nut and bolt , gi plate , aluminium lugs , pcc pit , dia pipe , funnel , gi strip , termination point , earth resitance tester , pcc bricks , sand , stone agg , cement

Central Government/Public Sector

CTN :45345631

15 Jun, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For tender for supply of electrical lugs plugs and connectors aluminium and copper -description1 , description2 , description3 , description4 , description5 , description6 , description7 , description8 , description9 , description10 , description11 , description12 , description13 , description14 , description15 , description16 , description17 , description18 , description19 , description20 , description21 , description22 , description23 , description24 , description25 , description26 , description27 , description28 , description29 , description30 , description31 , description32 , description33 , description34 , description35 , description36 , description37 , description38 , description39 , description40 , description41 , description42 , description43 , description44 , description45 , description46 , description47 , description48 , description49 , description50 , description51 , description52 , description53 , description54 , description55 , description56 , description57 , description58 , description59 , description60 , description61

CTN :45349762

09 Jun, 2026 2.95 Lacs

Sikar - Rajasthan

Tender For procurement of materials for repair of various components used in the fixing of light poles installed across of the failure different wards within municipal area - 61.13 p/l of double wall corrugated hdpe pipe confirming to is 16205 p-24, stiffness class 750 n, externally corrugated and having smooth surface inside with hdpe coupler, elbow, tee at required depth below the ground for laying cable of following nominal outer dia. mfr test report from nabl accrediated is to be submitted. (excavation of earth & back filling with compaction is to be paid extra) all as per pre approved by engineer in-charge.. for additional technical parameters of products/ work, refer annexure "a" attached with this bsr 50mm dia. , providing & laying p.v.c. / xlpe insulated & p.v.c. sheathed unarmoured copper cable confirming to is:1554 p-i / is:7098 p -i of 1.1 kv with electrolytic grade copper made of copper rods confirming to is 613-1964, of purity >99.7%, inner/outer sheath confirming to is:5831 in existing rcc/hume/stoneware / pvc pipe/open duct/cable trench/cable tray (with cable tie) including testing etc. as required of following size. oem must have it's own in house nabl accrediated laboratory for testing procedure as per is:10810 for additional technical parameters of product / work refer annexure 'a' attached with this bsr 3 core , supplying and making one end termination with nickel plated heavy duty brass single compression gland (as per is 12943-1990)) sibg type consisting of check nut, gland body, metal washer(3 nos.), outer seal rubber ring, compression nut, heavy duty aluminium lugs (as per is 8309-1993) duly crimped with crimping tool, pvc tape as per is 8337-1976 of following size of pvc insulated & pvc sheathed/ xlpe aluminium conductor cable of 1100 volt grade as required.all as per pre approved by engineer in-charge. for additional technical parameters of products/work, refer annexure "a" attached with this bsr 4 x 10.0 sq.mm pvc tape roll , supply and fixing of following lt supporting accessories with nut bolt & clamps made out as per standard discom's specifications with two coats of red oxide and two coats of aluminium paint etc. as required. all as per pre approved by engineer in-charge.for additional technical parameters of product / work refer annexure "a' attached with this bsr type a lt connector for aerial bunched cable each 73.00

State Government

CTN :45353485

03 Jun, 2026 7.50 Lacs

Kolhapur - Maharashtra

Tender For supply electric material ,at yalgud tal hatkanangale - divabatti, 14 w led bulb, 18 w led bulb, 26 w led bulb, pendant holder, 1/18 wire (aluminium), 1/18 wire (copper), 2.5 sq. m.m. service wire, 4 sq.m.m. service wirea, 6 sq.m.m. service wire, 10 sq.m.m. service wire, 2.5 m.m.x 4 core cable (aluminium), 4 m.m.x 4 core cable (aluminium), 6 m.m.x 4 core cable (aluminium), 10 m.m.x 4 core cable (aluminium), 16 m.m.x 4 core cable (aluminium), 2.5 m.m.x 3 core cable (copper), 4 m.m.x 3 core cable (copper), 2.5 m.m.x 4 core cable (copper), 4 m.m.x 4 core cable (copper), 6 m.m.x 4 core cable (copper), 10 m.m.x 4 core cable (copper), 1 sq.m.m. multistand wire (copper), 1.5 sq.m.m. multistand wire (copper), 2.5 sq.m.m. multistand wire (copper), 4 sq.m.m. multistand wire (copper), 6 sq.m.m. multistand wire (copper), 10 sq.m.m. multistand wire (copper), cello tape, 30 w led street light fitting, 50 w led street light fitting, 30 w led driver, 50 w led driver, 30 w led pcb, 50 w led pcb, 50 w led frad light fitting, 100 w led frad light fitting, 150 w led frad light fitting, 200 w led frad light fitting, 100 w led hybe fitting, 150 w led hybe fitting, 200 w led hybe fitting, 3/4" l bracket, 1" l bracket, hukup wire, cement pole clamp, lokhandi pole clamp, 45 w cfl fitting, 36 w cfl fitting, 85 w cfl fitting, cfl fitting holder, porselin holder (chinimati holder), 36 w pll tube, 36 w pll elcetronic chok, 36 w pll holder, strip conector, 16amp. x 250 y main switch, 32amp. x 250 v main switch, 16amp. x 500 v main switch, 32amp. x 500 v main switch, 63amp. x 500 v main switch, 32 amp. riverce forward switch, 16amp. x 250 v fuse kit kat, 16amp. x 500 v fuse kit kat, 32amp. x 250 v fuse kit kat, 32amp. x 500 v fuse kit kat, 63amp. x 500 v fuse kit kat, 100amp. x 500 v fuse kit kat, 200amp. x 500 v fuse kit ka, 16amp.change over switch, 32amp.change over switch, 16amp. mcb (s.p.), 32amp. mcb (s.p.), 63amp. mcb (s.p.), 6amp. mcb (s.p.), 16amp. mcb (d.p.), 32amp. mcb (d.p.), 40amp. mcb (d.p.), 63amp. mcb (d.p.), 1/2 mcb box, 4 way mcb box, 8 way mcb box, 21x15 miter box, 1.5 x 2 miter box, 2.5 x 3 miter box, row rubber, copper lugs, aluminium lugs, hand gloves (11000w), bobin, j i wire, wire cutter, pakkad, 20 w led tube set, 25 w led tube set, celing fan, table fan, wall fan, pedstal fan, 40 w led solar street light fitting, 60 w led solar street light fitting, 4 mtr. round pole, 6 mtr. round pole, 8 mtr. round pole, tester, big tester, 1" casing patti, 12w/10 a h/11.1v led street light solar, 14w/12 a h/12.8v led street light solar, 20w/12 a h/12.8v led street light solar, 24w/24 a h/12.8v led street light solar, 30w/24 a h/12.8v led street light solar, 36w/30 a h/12.8v led street light sola, 100a single fuse, 70 w led driver, 100 w led driver, 150 w led driver, 70 w led pcb, 100 w led pcb, 150 w led pcb, 70 w led street light fitting, 100 w led street light fitting, 150 w led street light fitting, clamp nut bolt

Raychem Termination Kit Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

State Government

State Government

Central Government/Public Sector

Central Government/Public Sector

State Government