Latest rc pole Tenders | Government rc pole Tenders

Central Government/Public Sector

CTN :45555774

22 Jun, 2026 NA

Mumbai - Maharashtra

Tender For supply, termination installation, testing and commissioning of ventilation system on roof of paint shop of lower parel workshop along with complete installation, frame work of suitable size with ms 50mmx 50 mmx 5mm, cabling, cable try work, wiring and protection system with 4 pole 20a mcb for each and mcb board along with 2.5 sqmm cable 4 core and 10 sqmm cable from panel to distribution board for main supply and power full exhaust system of length and height minimum 1 meter with width minimum 400 mm, diameter blades 900 mm, blades rotational speed -620 r/min or more. air flow 30,000 m?/h, noise level shall be less than 70 db, power shall be minimum 750 watt with the flap system and motor starter of 1 hp or as per suitable and confirming to s/iec 60947-4-1 or latest. all electrical works shall be carried out in accordance with the provision of indian electricity act 2003 and indian electricity rules 1956 amended to date and all the safety codes and procedures outlined in the safety codes shall be complied with general and safety requirement shall be governed by is 13947 (pt i) 1993 and is:8623/1993, amended to date. termination of all cables shall be done with bimetallic terminal connector suitable for 2.5 dia aluminium tubular busbar for 20a copper palm copper cu etp cw 0041a and aluminium barrel aluminium al 99.5 cable connector temperature resilience, corrosion resistance size: 2.5 sqmm confirming to is: 5561-1970 with maximum temperature rise of 90 degree celsius. material shall be confirmed to designation a6 of is: 617-1959. breaking resistance for barrel 85 n/m sq m and for palm 225 n/m sq m with stretching a5% for barrel must be for palm 2.5. type test certificate from nabl or any other govt agency lab report shall be attached along with the offer without which offer will be rejected. [ warranty period: 30 months after the date of delivery ] ]

State Government

CTN :45525947

22 Jun, 2026 2.62 Lacs

Bagdogra - West Bengal

Tender For supply and installation of 25 watt street light in the exiting electric rcc pole at various places of lower bagdogra gram panchayat

corporations/Associations/Others

CTN :45364686

17 Jun, 2026 NA

Gorakhpur - Uttar Pradesh

Tender For corrigendum : for the work of a.b cable reconductoring and additional circuit, replacement of damage line and pole, pvc wrapping on pole, stay set and stay insulator and battery charger sanctioned under business plan 2026-27 in areas under electricity urban distri

CTN :45369639

17 Jun, 2026 10.35 Lacs

Faizabad - Uttar Pradesh

Tender For corrigendum : replacement of damaged broken pcc and st pole, repairing and maintenance of line at area of sub-division-milkipur under jurisdiction of electricity distribution division- milkipur, ayodhya (running work)

CTN :45369671

17 Jun, 2026 9.67 Lacs

Faizabad - Uttar Pradesh

Tender For corrigendum : replacement of damaged broken pcc and st pole, repairing and maintenance of line at area of sub-division-kumarganj under jurisdiction of electricity distribution division- milkipur, ayodhya (running work)

CTN :45345533

18 Jun, 2026 10.15 Lacs

Lalpur - Gujarat

Tender For corrigendum : supply of bending machine conduit pipe , bus bar with brackets 1 mtr , cctv camera kit , ceiling fan coil winding machine , conduit pipe cutting and threading machines , control panel , digital multi meter , discrete component trainer , dmx controller 512 , ev charger home 1 phase input , ev charger 3 phase input , file half round 2nd cut 250 mm with handle , file round 2nd cut 150 mm with handle , knife switch dpdt fitted with fuse terminals 16 amp , knife switch tpdt fitted with fuse terminals 16 amp , ladder - tower 3 meters on tyre wheels - min 10ft - max. 30ft , lux meter lcd read out 0.05 to 7000 lumens with battery. , magnetic flux meter , mallet barwood , meter reading instrument mri , potential transformer 415 v, 50hz, pt ratio, 440v.110v,10va , power factor meter digital , primary current injection set , rcc pole with accessories , rechargeable battery 12v,100ah , rubber mat , single phase transformer , single phase variable auto transformer , smart meter 3 phase - smart energy meter , soft starter , solar dc pump 1 hp , solar panel with battery 18 watt , solar street light , solar traffic light , solid state solar base single phase energy meter , spanner d.e. set , tachometer analog type - 10000 rpm , three phase transformer , wheat stone bridge ) /bid number : gem/2026/b/7576252 * /dated: 27-05-2026 & & / bid document 1 / 40

CTN :45501064

02 Jul, 2026 20.00 Lacs

Bikaner - Rajasthan

Tender For notice inviting limited tendernotice no: 01/elect./2026/ 706 date:- 10.06.2026tools & equipments of –electrician trade- heavy duty screwdriver insulated , electrician screwdriver thin stem insulated handle, , knife double bladed electrician, , chisel firmer with wooden handle, , grease gun, , (a) crimping tool, , wire cutter and stripper, , hacksaw frame, , tweezers, , drill hand brace, , plane cutters, , smoothing cutters, , file flat rough, , file flat bastard, , file rasp, half round, , the soldering gun, , contactor & auxiliary contacts (rm), , contactor & auxiliary contacts. (rm), , pin type, shackle type, egg type & suspension type insulators including hardware fitting, , portable electric drill machine, , load bank (lamp/heater type), , brake test arrangement with two spring balance rating, , laboratory type induction coil, , series test lamp (rm), , knife switch dpdt fitted with fuse terminals (rm), , knife switch tpdt fitted with fuse terminals (rm), , miniature circuit breaker (rm), , earth plate (rm), , earth electrode (rm), , elcb and rccb (rm), , fuses (rm), , rheostat (sliding type), , capacitors (rm), , various electronic components (rm), , various lamps (rm), , plug socket piano switch lamp, , holder (rm), , cables:, , twisted pair, , non-metallic sheathed cable, , underground feeder cable, , ribbon cable, , metallic sheathed cable multi-, , conductor cable coaxial cable, , direct-buried cable (rm), , rubber mat (rm), , electrician helmet, , rcc pole with accessories (ms angle iron, 'c' clamp, stay insulator etc.) and materials, , quipment, , ohm meter; series type & shunt type, portable box type, , digital multi meter, , a.c. voltmeter m.i. analog, portable box type housed in bakelite case, , milli voltmeter centre zero analog, portable box type housed in bakelite case, , ammeter mc analog, portable box type housed in bakelite case, , ac ammeter mi, analog, portable box type housed in bakelite case, , weight wattmeter analog, , (b) frequency meter (digital), , magnetic flux meter, , tachometer, , tong tester / clamp meter, , megger, , single phase variable auto transformer, , growler, , ac starters: :- -, , f. star delta starter soft starter, , g. auto transformer type, , oscilloscope dual trace, , function generator, , discrete component trainer, , linear i.c. trainer, , digital i.c. trainer, , domestic appliances -, , g. mixture & grinder, , h. washing machine semi-automatic, , i. motor pump set, , oil testing kit, , battery charger, , current transformer, , potential transformer, , 1 5 or 17 computer or latest version, , d.c. shunt generator with control panel, , motor-generator (ac to dc) with control panel, , d.c. compound generator with control panel including fitted rheostat, voltmeter, ammeter and breaker, , dc series motor coupled with spring balance load with control pannel, , dc shunt motor with control pannel, , dc shunt motor with control pannel, , dc compound motor with starter and switch with control pannel, , motor generator(dc to ac) set consisting of - shunt motor with starting compensator and switch directly coupled to ac generator with exciter and switch board mounted with regulator, breaker, ammeter, voltmeter frequency meter, knife blade switch and fuses etc. set complete with cast iron bed, , plate, fixing bolts, foundation bolts and flexible coupling., , ac squirrel cage motor with star delta starter and triple pole iron clad switch fuse with mechanical load., , ac phase-wound slip ring motor with starter switch, , universal motor with starter/switch, , synchronous motor with accessories like starter, excitation arrangements., , thyristor /igbt controlled d.c., , motor drive with tacho-generator feedback arrangement, , thyristor/igbt controlled a.c. motor drive with, , single phase transformer, core type, air cooled, , three phase transformer, shell type oil cooled with delta/ star, , electrical machine trainer -, , diesel generator set with changeover switch, ov

corporations/Associations/Others

CTN :45519360

24 Jun, 2026 NA

Kanyakumari - Tamil Nadu

Tender For kkedc 1)eos to 1no addl st.light of 8 loc in railway to brandy shop road to the commissioner, nagercoil corporation under pvm section. 2)eos to 1no addl st.light of 9 loc the commissioner, nagercoil corporation at kamarajar nagar roadunder pvm section. 3)improvement estimate is proposed for the provision of an additional lt overhead line to the existing fii feeder at rajeev gandhi ss strengthening the existing 7/2.11 and 7/2.59 acsr conductores to 7/3.15 aaac conductor and insertion of 8mtr psc poles under parvathipuram section. 4)improvement estimate for 3nos 9 mtr insertion pole at loc fii/48, fi/5a and 6a and 9nos 8mtr insertion pole at fii/49a, 44a, 45a, fi/46a and 47a pandarathoppu ss 100 kva in kaliyankadu feeder 110/33-11 kv nagercoil ss under parvathipuram section. 5)replacement of deteriorated rcc pole 9mtr at loc fi/8,9 sarathanagar ss, 1no 9mtr inserting pole at loc a in ganganager and pandarathoppu ss under parvathipuram section.. in kanyakumari edc.

State Government

CTN :45296413

15 Jun, 2026 NA

Lalitpur - Uttar Pradesh

Tender For bid to ras corrigendum : providing of custom bid for services - construction of 11 kv/lt lines, establishment of double-pole lt substations, installation of metering systems, and the shifting of various ht/lt electricity lines in the area of edd, lalitpur under deposit scheme

Central Government/Public Sector

CTN :45301446

18 Jun, 2026 39.00 Lacs

Goa - Goa

Tender For corrigendum : repair/ maintenance including replacement of damaged rcc poles post tops, replacement of junction boxes and other connected works at ins mandovi under ge (p) navy mandovi

Rc Pole Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

corporations/Associations/Others

corporations/Associations/Others

State Government

Central Government/Public Sector