Latest rcc sedimentation tank Tenders | Government rcc sedimentation tank Tenders

Central Government/Public Sector

CTN :44667703

10 Apr, 2026 NA

Mumbai - Maharashtra

Tender For procurement of of spares of patriot make crane for mh asset - seal oil sl, o ring, o ring, o ring, seal oil sl, o ring, o ring, o ring, o ring back up, o ring, o ring back up, o ring, hose assembly, hose assembly, hose assembly, main aux hydraulic pump, boom pump, swing pump, anti 2 block system (for main & aux)-hyd, fleeting sheave, slew system high pr.filter, slew pump, bushing- lever housing, lever arm-dog, retaining plate, brake band assembly, sheave for pendant block boom hoist, pin sheave 31/2" dia 24" long for pendan, actuator stub plate, pin sheave 31/2" dia for main frame, nyloc washer 4" od, nyloc washer 4" od 31/2"id and 1/8" thic, kit directional control valve, main/ aux hydraulic pump, boom hoist & swing pump(a tandem unit), check valve, gear coupling ( pump drive adapter), regulator valve, hydraulic oil cooler, repair kit of 4 way 3 position tandem, repair kit of rp70 pilot operated relief, repair kit of 4 way 3 position tandem, repair kit of 4 way 3 position tandem, joystick valves, hydraulic valves, pilot dump valve, counter balance valve, pressure reducing valve, radiator, engine, hydraulic tank breather, kit suction filter assembly, bushing lever housing, lever brake band, retaining plate, suction filter, hydraulic oil filter, air intake filter, valve main, valve swing, air filter, pilot valve, joystick valves, winch motor, winch motor, engine oil pressure gauge, 2 pos/ 2 way valve, shuttle valve, gauge, kit , return filter assembly, hydraulic oil pressure guage, drive pinion, swing gear box, hydraulic swing motor, hydraulic swing brake, triple section hydraulic pump, boom hoist winch-include luffing pawl), friction plates for boom winch brake, brake discs, u-cup seal, piston back up ring, brake spring, o-ring, back up washer, o-ring, slew hyd.pre.gauge, o-ring/seal kit, o-ring/seal kit, o ring / seal kit, o ring / seal kit, engine foot throttle, gauge, pilot pressure, hoist selector valve, joy stick pressure gauge, slew hyd. pr. gauge, hand pump, air pressure gauge, eng start valve, engine shutdown valve, foot valve, radiator, cable emergency stop, return filter assembly, kit, suction filter assembly, kit, diesel and hydraulic oil tank gasket, air pressure gauge, pilot dump valve, pressure reducing valve, 2 position 2 way valve, shuttle valve, engine oil pressure gauge, engine stop cable, water temp.gauge, magnetic pick up, joy stick, main/ auxiliary, joy stick , boom / slew, clamps for main,aux.& boom wire rope, swing brake, limit switch assembly, wiper motor with arm, blade and switch, anti 2 block system ( main & aux. hoist, compressor safety valve, drain valve, horn switch - push type, selector valve, pilot pressure valve, kit hydraulic directional valve, pilot pressure valve, gauge,hyd control - pressure., hydraulic oil cooler, return filter assembly, kit, suction filter assembly, kit, swing gear box, swing drive pinion, swing brake, joy stick, main/ auxiliary, joy stick , boom / slew, pilot dump valve, pressure reducing valve, 2 position 2 way valve, shuttle valve, engine stop cable

CTN :44610069

10 Apr, 2026 NA

Darjeeling - West Bengal

Tender For corrigendum : supply of 0.75 inch for casing caping , tape insulation 10 mtr , pvc switch board 7 x 4inch , pvc swith board 6 x 8inch , pvc square block , mcb db spn 8 ways double door 240 volts with aluminium bus bar , mcb 6 amps sp 240 volts , mcb 16 amps single pole 240 v , mcb spn 40 amps dp 240 volts , exhaust fan, havey duty ms body 300mm sweep , bib tap cp 15mm bore isi marked , stop cock cp 15 mm , pillar cock stainless steel cp 15 mm bore , chromium plated two way bib tap and health faucet with flexible pipe and clamp , ppr pipe 20mm 3 layer , ppr pipe 25mm 3 layer , ppr tee 20 mm dia , ppr tee 25 mm dia , ppr elbow 90 degree 20 mm , ppr elbow 45 degree 20 mm , ppr elbow 90 degree 25 mm , ppr elbow 45 degree 25mm , ppr socket 20mm dia , pvc socket 110 mm , pvc elbow 110 mm dia , pvc tee 110 mm , ppr union 20 mm , pvc float valve heavy duty 25mm dia suitable for ppr pipe , ppr male threated socket 20-25mm dia , ppr female threated socket 20-25mm dia , ppr male threated elbow 20-25mm dia , ppr reducer socket 25 x 20mm , m seal , pvc elbow 2 inch , pvc socket 2 inch , pvc pipe 2 inch dia 6 mtr long , pvcfloor trap 4 inch dia with grating 2inch outlet , pvc socket 4 inch , pvc elbow 4 inch dia , pvc pipe 4inch dia 6 mtr long , pvc grating 4 inch dia , pvc clip for ppr pipe 25mm dia , ppr tank connector 25 mm , vitreous wash hand basin , nsss commodes , pre-fabricated septic tank of 1000 ltrs capacity septic tank , pre-fabricated sokage pit 500 ltr capacity , pvc p trap 110 x 75mm , pvc elbow 3 inch , pvc socket 3 inch , pvc pipe 3 inch dia 6 mtr long , pvc tee 3 inch , jointing resin solution of 1 kg or capsules of silicone gel with gel gun for leak proof , towel rail cp 600mm long , soap dish stainless steel chromium plated complete with fittings , electric storage water heater geyser 15 ltr capacity , flexible connection pipe 450 mm long for hot and cold water. , lightening conductors set complete with all accessories , elect earthing set , ppr female threated elbow 20-15mm dia , ppr male threated socket 20-15mm dia , ppr female threated socket 15-20mm dia , wastebin 120 ltr dim of 480 x 550 , water dispencer of 15 ltr capacity , invertor 2kva capacity with 02 battery 24v , provn of central heating system for double storey building complete , electrician tool kit , plumbing tool kit , measuring fibre glass tape 5 mtr long , industrial safety helmet conforming to is-2925 , showel square nose 14 gauge blade size 310 x 245 mm shaft size 710 mm , puf rivet machine , galvanised iron pan mortar tasla 18 gauge 16inch dia minimum weight 01 kg , rammer earth with handle minimum weight 5 kg without handle , electric tile cutting machine with interchangable blades , electrical sheet cutter machine with blade

CTN :44610089

10 Apr, 2026 NA

Darjeeling - West Bengal

Tender For corrigendum : supply of wave solar invertor along with cables and fittings as required , solar battery 12 volts 200 ah gel based lithium based along with battery cabinet and cable , fd kero heater , drapery rods with brackets for curtain , nsss commodes , stainless steel grade 304 shower floor pan of size 1150 x 1030 mm , vitreous wash hand basin white 550 mm x 400 mm flat back , wash basin looking mirror 450 mm x 900 mm , ss soap dish , aluminium peg set of 6 , wash basin mixture cp for hot and cold water , bib tap long body cp 15mm bore , bib tap short body cp 15mm bore , stop cock cp 15 mm bore , ss jali 4 inch , pvc flushing cistern 10 litres capacity with pvc connections 600 mm long , 20 mm ppr pipes pn 16 for hot and cold water supply in all bathing area and washbasin along , 20 mm ppr pipes pn 16 for cold water supply in toilet area and urinals along with all connections , 25 mm ppr pipes pn 16 for hot and cold water supply in toilet block from water tank solar water heater along with all connections , pvc pipe 110 mm 6 mtr long , pvc socket tee elbow trap grating for water and waste drainage disposal , puf insulated water tank 500 ltr , water tank staging of size 3200 mm length x 1600 mm width x 6000 mm height , hdpe septic tank of 1000 ltrs , hdpe soak pit of 500 ltrs of reputed make , solar water heater of 500 ltrs capacity with additional steel frame of 5 feet high , lightening conductor complete set , earthing of building , led downlight or equivalent 9w with 270 degree light spread color cool white , led security light energy saving and environmentally friendly long life versatile pressure die cast aluminium ip 66 with high power led , polycarbonate 20 amp penta combined 2 hole modular box with switch socket , 20 amp heavy duty modular box with switch socket and single pole mcb enclosure , 4 module modular box with switch , 3 module modular box with switch , 2 module modular box with switch , mcb distribution box 12 way 240 volts double door complete with copper busbar , mcb 6 amp single pole 240 volts , mcb 20 amp single pole 240 volts , mcb 63 amp double pole 240 volts , pvc casing capping is conforming 25 mm , service cable 10 sqmm 2 core armoured aluminium , 1.5 sqmm multistrand copper cable single core frls in green colour for earth wire , 1.5 sqmm multistrand copper cable single core frls , 2.5 sqmm multistrand copper cable single core frls , isi marked tmt bar fe 550 grade 12 mm dia , isi marked tmt bar fe 550 grade 10 mm dia , isi marked tmt bar fe 550 grade 8 mm dia , binding wire 1 mm , plumb bob iron , picks axes with chisel and point ends kudali 14 cp nominal weight 3.0 kg overall length minimum 595mm with handle , vernier calliper digital type , screw gauge digital type , electrician tool kit , multipurpose non slip rubber reusable gloves , measuring fibre glass tape 5 mtr long , industrial safety helmet conforming to is-2925 of approved colour , showel square nose 14 gauge , galvanised iron pan mortar , rammer earth with handle , form work 12mm thk plywood 2400mmx1200mm , soft wood wooden fillets , nails 50mm long

CTN :44601154

10 Apr, 2026 NA

Darjeeling - West Bengal

Tender For corrigendum : supply of 0.75 inch for casing caping , tape insulation 10 mtr , solid plate with base frame suitable for surface plastic box of 4 module catpart no 30249wh , solid plate with base frame suitable for surface plastic box of 3 module catpart no 30238wh , solid plate with base frame suitable for surface plastic box of 2 module catpart no 30227wh , surface plastic box suitable for moduler switches and socket of 4 module capt part no 21292 , surface plastic box suitable for moduler switches and socket of 3 module capt part no 20449 , surface plastic box suitable for moduler switches and socket of 2 module capt part no 21281 , pvc square block , mcb db spn 8 ways double door 240 v with bus bar , mcb 20 amps sp 240 v , mcb 10 amps single pole 240 v , isolator 40 amp dp 240 volts , pvc copper cable pvc 2.5 sqmm s c multistrand , exhaust fan 300mm sweep with louver shutter , pvc copper cable pvc 1 sqmm s c multistranded conductor for earth wire in green color , steel screw full threaded 0.5 inch , steel screw full threaded screw 1 inch , steel screw full threaded screw 0.25 inch , blank plate of single module cat part no 21598 , pir insulated 55mm thick water tank 1000 ltrs with gi flange for connection with nipple and gasket , bib cock brass 15mm as per is 781 , pillar cock stainless steel cp 15 mm , stop cock brass 25 mm , taeflon tape , pvc float valve heavy duty 25 mm dia suitable for ppr pipe , stop cock brass 15 mm , stop cock brass suitable for 20 mm ppr water supply line , ppr pipe 25 mm dia , ppr pipe 20mm outer dia 3 layer pn 16 , ppr tee 20mm dia , ppr tee 25mm dia , ppr elbow 90 degree 20mm , ppr elbow 45 degree 20mm , ppr elbow 90 degree 25mm , ppr elbow 45 degree 25mm , ppr socket 20mm dia as per is 15801 , ppr union 20 mm as per is 15801 , ppr male threaded socket 20 x 25 mm dia , ppr female threaded socket 20 - 25 mm dia , pvc clip for ppr pipe 25mm dia , ppr reducer socket 25x20mm , 25 mm ppr tank connector , ppr male threaded socket 20 toi 15 mm dia , ppr female threaded socket 20 to 15 mm dia , ppr female threaded elbow 20 to 15 mm dia , ppr male threaded elbow 20 to 15 mm dia , ppr reducer socket 25x20 mm good quality , m seal good quality , whb vitreous ceramic size 450x330mm white complete , pvc flusing cistern 10 ltrs capacity with pvc connection and waste pipe , towel rail cp 600mm long , ewc vitreous ceramic strap including seat cover white s trap complete , looking mirror cum cabinet 450 x 300 mm , soap dishes stainless steel size 10cmx12cm , pvc pipe 2inch dia 6m long , pvc elbow 2 inch , pvc socket 2 inch , pvc floor trap 4 inch dia with grating 2 inch outlet , pvc socket 4 inch , pvc elbow 4 inch dia , pvc pipe 4 inch dia 6 mtr long , pvc grating 4 inch dia , lightning conductor complete set , electric earthing set complete , heating system bazooks as per specification , spanner set consisting of following in each set , centre punch 8mm dia isi marked , electric drill machine heavy duty 235 watt capacity with a set of drill bit , tester for electrician with plastic handle 150mm , showel square nose 14 gauge tata high carbon steel , galvanised iron pan mortar tasla 18 gauge 16 inch dia , measuring fibre glass tape 5 mtr long , picks axes with chiesel and point ends , water bucket steel 13 inch dia , rubber hand gloves for mason , industrial safety helmet , drill bit 3 to 15 mm , electric tile cutting machine with 05 nos inter changable blades , gum boots superior quality

corporations/Associations/Others

CTN :44647053

18 Apr, 2026 NA

Morbi - Gujarat

Tender For empanel of agencies of suction machine for cleaning of safety tank

State Government

CTN :44692047

13 Apr, 2026 23.92 Crore

Sangli - Maharashtra

Tender For construction of safety measures works for the devikhindi tunnel on the stage 3 a to ghanand tank canal taluka khanapur district sangli

Central Government/Public Sector

CTN :44690000

08 Apr, 2026 NA

Kapurthala - Punjab

Tender For retention tank for lhb ac ra coaches (without flushing arrangement). sticker for bio-tank to drg. no. icf/std-6-4-048 alt b item 1 is in the scope of supplier as per spec mdts 26001 rev-04. note: safety clause must be followed according to annexure-a of dy.cple-ii l.no.rcf/emp/1 dated. 01.04.2025 and use high tensile fasteners for critical application as per design l.no. md46111 dated 06/08/2025, as per drawing: ra63247 alt b without item no. 3 to 6 and mdts 26001 rev-04 is applicable (flushing arrangement to clause 3.5 is not in scope of supply), installation & commissioning: inclusive, packing instruction no. pi100 ver1.0. [ warranty period: 84 months after the date of delivery ]

Central Government/Public Sector

CTN :44696084

09 Apr, 2026 NA

Multi City - Maharashtra

Tender For auction sale of others - dismantlig of abandoned/condemned steel over head tank at sr.cdo/ltt near old tank wagon shop premises. remarks:-1. lot is approachable by pakka road. loading point is 50 metres kutcha road approx. away from lot and cutting materials to be lifted manually. if loading is done by hydra it will be 10 metres approx. between lot materials and loading point a big nullah exists. all materials have to be lifted by hydra and shift to the loading point. any equipments required for the loading and cutting purpose the same should be arranged by the purchaser. 2. utmost care should be taken while shifting cut materials upto loading point 3. the delivery of m.s. ferrous will be made on actual weighment basis only at the nearest govt.approved weigh bridge. the items mentioned in the description only will be delivered. 4. in case of excess quantity entire quantity to be lifted by the purchaser by payment for difference of actual quantity delivered with lot quantity.lot number is exhibited/painted on the tank.the quantity is worked out on approximate basis. 5. materials like electric wires, fittings & cables and other such kind of materials if available inside the tank premises the same should be returned to the stockholder. the items used in fencing around the structure such as rail, tie bar, jali, stone, bricks, wooden pillar or any other items and similar type of material lying nearby the structure/lot will not be delivered. 6. two tank wagons are lying next to the lot. the same is not in lot and not to be delivered. 7. dismantling& cutting is allowed for easy loading purpose at the risk & cost of the purchaser. 8. dismantling is permitted upto ground level only. 9. the purchaser should ensure that duringdismantling& cutting operation no nearby structure/building should be affected and take necessary care/safety precautions to avoid any mishap as well as damage to railway property. 10. the purchaser will be fully responsible if any accident/unusual incident occursatwork site/placeduring dismantling. 11. train operations and other railway work should not be disturbed/affected. 12. all debris should be cleared before completion of delivery. 13. the purchaser is advised to see the lot site/content before bidding in regard to cutting, loading point . no claim will be entertained after sale of lot. stock holder -sse (works) cla. qty:-26.017 mts (approx).

Central Government/Public Sector

CTN :44696083

09 Apr, 2026 NA

Kurla - Maharashtra

Tender For auction sale of others - dismantlig of abandoned/condemned rcc over head tank at special repair.cdo/ltt diesel engine cutting yard,kurla and sse/wks/ltt special repair office premises. remarks - 1. lot is approachable by pakka road. 2. the delivery will be made on as is where is basis and by lot basis. the items mentioned in the description only will be delivered. 3. lot number is exhibited/painted on the structure. 3. the quantity is worked out on approximate basis. 4. the delivery will be made on lot basis and no part delivery will be allowed. 5 materials like electric wires, fittings & cables and other such kind of materials. available inside the structure which is not within the scope of lot description, shall be handed over by the purchaser to custodian.6. the items used in fencing around the structure such as rail, tie bar, jali, stone, bricks, wooden pillar or any other items and similar type of material lying nearby the structure/lot will not be delivered.7. dismantling& cutting is allowed for easy loading purpose at the risk & cost of the purchaser 8. dismantling is permitted uptoground level only.9. the purchaser should ensure that during dismantling & cutting operation no nearby structure/building should be affected and take necessary care/safety precautions to avoid any mishap as well as damage to railway property. there is movement of vehicles and humans near the tanks. purchaser should barricade the location before dismantling/breaking of tanks.10. the purchaser will be fully responsible if any accident/unusual incident occurs at worksite/place during dismantling. 11. extra precaution to be taken if there are trees near the structure or its branches are spreadover the same.13. train operations and other railway work should not be disturbed/affected.14. after complete removal of pcc/bricks/rubble masonry and rubbish from the site, delivery of other items will be permitted and the land should be cleared of all debris before completion of delivery.15. the list & location of rcc tanks are available with stockholder. 16.the purchaser is advised to see the lot site and units before bidding. stock holder- sse(works) cla. qty-1.0 bylot.

CTN :44700570

22 Apr, 2026 NA

Gorakhpur - Uttar Pradesh

Tender For supply of grooved rubber profile for safety strap of retention tank as per drawing no. icf/sk3-6-3-201 alt.-nil. note- length of each unit should be 3370 mm + , - 10 mm.

Rcc Sedimentation Tank Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

corporations/Associations/Others

State Government

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector