Latest rcc structural repair Tenders | Government rcc structural repair Tenders

State Government

CTN :45352599

04 Jun, 2026 4.61 Lacs

Faridabad - Haryana

Tender For providing and fixing 10 bhp motor, panel board and providing and laying in position cement concrete in village nangal jat tehsil hathin dist.. palwal and all other works contingent thereto

corporations/Associations/Others

CTN :45346453

09 Jun, 2026 29.95 Lacs

Coimbatore - Tamil Nadu

Tender For improvement works and supplying of kitchen accessories to the amma unavagam at poo market , mettupalayam road in ward no.72 of west zone. - earth work excavation of building in kind of soilsand sup soilsand full depth as may be directed by the departmental officers with initial lift and leads and cleaning and leveling the site., cement concrete 1:4:8(one cement,four sand and eight aggregate) using 40mm gauge hand broken granite stone jelly for foundation including dewatering if found necessary and laid in layers of not more than 15cm thick and compacted, supplying and erection shuttering,including necessary supports for plain in all floors using mild steel sheets of size 90x 60 cms and bg 10 stiffed with surfacewelded mild steel angles for boarding supported by casuarina props at suitable intervals etc. completecomplying with standard specifications as directed, for plinth beam, for lintel beam slab, for vertical walls, cement concrete 1:1.5:3 (one cement,one and half sand and three aggregate)using 20mm gauge hard broken granite stone jelly for all rcc items of work excluding centring, shutteringand cost of reinforcement grill but including fixing fan clamps and fixtures in rcc works wherever necessary as per the direction of departmental officers complete, cement concrete 1:2:4 (one cement, two sand and four aggregate ) using 20mm hard broken granite stone jelly for all pcc items of work etc., complete fixturas directed by departmental officer ., supplying,fixing and placing in position mild steel /ribbed torsteel rods for all rcc works including cost of steel and binding wire also in all floors,complete complying with standard specifications(upto 16mmdia rods), fly ash brick work in cm 1:4 (one cement & four sand) using size 9"x4 3/8"x2 3/4" including finishing,curing,etc., complete complyingwith standard specification., plastering with cement mortar 1:3 (one cement and three sand) 12mm thick in all floors including cost and conveyance of all materials to site etc,complete as per standard specifications, plastering with cement mortar 1:5 (one cement and five sand) 12mm thick in all floors including cost and conveyance of all materials to site etc,complete as per standard specifications, finishing the floor with 20mm cement concrete ( ellis pattern rst sort - no sand to be used) etc complete as directed., supplying, fabricating, erecting structural steel work for roofing welded or bolted type using ms channels, angles, plates and roundbars etc. conforming to is specification including primer coating and enamal painting as per design given by the departmental officers etc, complete as per standard specification., supplying and roofing with pplg sheet of selected colour fixed to required profile inclusive of brackets and screw arrangements etc.,complete, supplying and erecting pull and push type rolling shutter with i.s.i. make of approved size and section using 18 gauge g.i.sheet with manually operated type. the shutter shall be painted with one coat of red oxide primer and the rate is inclusive of hood covers, transportation charges etc, complete as per standard specification., supply of man hole cover and frame is 12592 including fixing etc. extra heavy duty circular (228kg) 600 mm dia, supplying and fixing in position cement based hydrualically pressed anti skid tiles (pattern design) 20mm thick in cement mortar 1:3 (one part of cement and three part of plastering sand (p-sand)), 20mm thick and pointed with same colour of cement etc., complete as per standard specification, dadooing the walls with first quality approved coloured glazed tiles of size 150x150x6mm laid in cement motar 1:2 mix to 10mm thick and pointing with white cement using 0.40kg per sqm including finiching the joints and surface etc., complete, flooring finishing with first quality ceramic tiles of all colours of size 305cm x 305cm x 6mm laid in cement motar1:3 mix to 20mm thick and painting with cement paint using 0.3kg 1m2 including finishing the joi

CTN :45341983

10 Jun, 2026 22.88 Lacs

Villupuram - Tamil Nadu

Tender For providing 5 nos of works at t.konalavadi panchayat - providing 5 nos of works at t.konalavadi panchayat, construction of waiting shed building at t.konalavadi panchayat, construction of rcc mini tank with mini power pump at t.konalavadi old colony in t.konalavadi panchayat, providing cement concrete road 86m north street in t.konalavadi panchayat, construction of drainage 15m work at north street in t.konalavadi panchayat, providing new hand pump near waiting shed at t.konalavadi panchayat

CTN :45323589

16 Jun, 2026 12.37 Lacs

Gautam Budnagar - Uttar Pradesh

Tender For in the khoda-makanpur municipal area, ward no. 31 (lokpriya vihar-i) improvement works for the concrete (cc) road and drainage system, extending from mansoor house to p.d. memorial school.

CTN :45323596

16 Jun, 2026 12.30 Lacs

Gautam Budnagar - Uttar Pradesh

Tender For in the khoda-makanpur municipal area, ward no. 33 (lokpriya vihar) improvement works for the drainage system and concrete (cc) road, extending from noori masjid to nazar mohammad house, and from mahtab chaudhary residence to haji yakub clothing shop.

CTN :45323601

16 Jun, 2026 30.91 Lacs

Gautam Budnagar - Uttar Pradesh

Tender For in the khoda-makanpur municipal area, ward no. 32 (vandana enclave) improvement works for the concrete (cc) road and drainage system, extending from netrapal house to kewat niwas, and from omkar house to balaji property, as well as in the adjoining l

CTN :45344008

10 Jun, 2026 NA

Chiplun - Maharashtra

Tender For balance work of pitching and concrete works of earten dam of yelondwadi irrigation project tal. chiplun, dist. ratnagiri.

CTN :45321629

05 Jun, 2026 NA

Patiala - Punjab

Tender For quotations are invited for supply of material for carpenter works in r-type 25 to 48 at punjabi university patiala - commercial plywood 8'x4' 11 mm approx , g.i. wire netting approx 22x12 4'x50' , fevicol sh (pidilite) (1 kg pkg) , kail wood , m.s. black nail ¼" , m.s. nails 17 no. 2.5" , m.s. nails 17 no. 2" , m.s. naisl 17 no. 1.5" , m.s. nails 17 no. 1" , m.s. nails 17 no. with head , glass 4'x2' , m.s. nails 3" , m.s. nails 14 no. 2.5" , m.s. nails 14 no. 2" , m.s. nails 14 no. 1.5" , m.s. screw 2.5" (100 pc per pkt) , pvc gati 2 (100 pc per pkt) , concrete drill bit 2

corporations/Associations/Others

CTN :45343627

11 Jun, 2026 17.50 Lacs

Karur - Tamil Nadu

Tender For improvement works for the chief engineer s office by brick wall partition screed concrete replacement of floor and bathroom tiles providing wpc wall panel false ceiling haier 4 ton round way inverter cassette air conditioner electrical install

State Government

CTN :45325008

02 Jun, 2026 NA

Nadia - West Bengal

Tender For material supply works of mgnrega under santipur development block - coarse sand(grading zone ii as per is 383-1970) stacked at site , medium sand(grading zone ii as per is 383-1970) stacked at site, , fine sand(grading zone ii as per is 383-1970) stacked at site, , silver sand- stacked at site, , cement(ppc/psc/opc) 33 grade, , cement(ppc/psc/opc) 43 grade, , cement(ppc/psc/opc) 53 grade, , steel material- tor steel rods/hysd bars/tmt, , bars(sail/tata/rinl) (fe415/fe500/fe500d, conforms to is 1786), , steel material- tor steel rods/hysd bars/tmt, , bars(jsw/jspl/shyam/srmb/ssl/bmasl/electro, , steel) (fe415/fe500/fe500d, conforms to is 1786), , stone graded aggregates 10mm nominal size, , stone graded aggregates 20mm nominal size, , stone graded aggregates 40mm nominal size, , (a) first class bricks(kiln burnt) sorted and stacked at site, , (a) second class bricks (kiln burnt) sorted and stacked at site, , (c)first class picked jhama bricks sorted and stacked at site, , (e) jhama metal (kiln burnt) sorted and stacked at site, , (f) brick bats sorted and stacked at site, , (g) brick aggregates (40mm down) sorted and stacked at site, , hire charges of concrete mixer 0.25 to 0.40 cum with hopper, , vibrator(needle type 40mm), , plate vibrator, , hire charges of 5 kva genarator, , hire charges of 3 kva genarator, , hire charges of monkey set, , hire charges of diesel road roller- 8-10 tonne, , empty gunny bag, , nail, , salt bullah (7.5-10cm dia), , eucalyptus bullah (7.5-10cmdia), , thermocol 12.5mm thick., , polythene sheet(150gm per sqm), , gi wire, , coconut rope, , lime dust, , farm yard manure/cowdung(@max 20% moisture content), , vermi compost, , neem khol or other oil seed cake, , carbofuran-3g, , g-9/banana sapling tissue culture, , nylon net, , poly rope, , bamboo, , 2:1:1 npk based organic manure, , 5:1:1 npk based organic manure, , jharii/rose can, , bio fungicides, , imida-chlorpide 17.8% sl, , chloropyriphos 50% ec, , zinc phosphide, , carbendazim 50 wp fungicides i.e bavistin, , spraying machine (hire) per day, , curing compound, , good earth, , polithin tube(25 cm*10cm), , insecticide, , hire charge of 25 mm thk. shuttering timber wood, , n.r.k. (10:26:26), , n.r.k. (19:19:19), , n.r.k. (20:20:20), , unslaked lime, , glue, , wire mesh, , hire charge of electric welding machine, , galvanised steel corrugated sheet, , galvanised steel boits & nuts 6mm dia & 250 mm long round, , head with slots, , galvanised steel j or l hook 8 mm dia, , g.i. limpet washer, , bitumen washer, , galvanised steel plain sheet, , paddy straw, , mild steel tubes hot finished seamless type, , poly rope, , mango seedling, , nursary water cane, , insecticide, , akash moni seed, , neem seed, , segun seed, , mehoguni seed, , gamar seed, , garden seed, , krishnachura seed, , radhachura seed, , babla seed, , areca saplings, , coconut saplings, , mango bid, , coconut rope, , hire charge of bamboo for shuttering, , water proofing compound, , m.s. integrated steel for steel window and ventilator, , m.s.or w.i. ornamental grill for door and window, , chromium plated brass handles 100 mm with plate 175x32 mm, , bright finished or black enamelled mild steel butt hinges 75x47x1.70 mm., , bright finished or black enamelled mild steel butt hinges 50x37x1.50 mm., , bright finished or black enamelled mild steel scrwes 50 mm., , bright finished or black enamelled mild steel scrwes 40 mm., , bright finished or black enamelled mild steel scrwes 30 mm., , bright finished or black enamelled mild steel scrwes 25 mm., , bright finished or black enamelled mild steel scrwes 20 mm., , bright finished or black enamelled mild steel bolts and nuts 50x6 mm., , oxidised mild steel sliding door bolt 300x16 mm., , oxidised mild steel sliding door bolt 250x16 mm., , oxidised mild steel door latch 300x20x6 mm., , oxidised mild steel door latch 250x20x6 mm., , oxidised mild steel tower bolt (barrel type) 250 x10 mm., , oxidised mild steel tower bolt (barrel type) 200 x

Rcc Structural Repair Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

corporations/Associations/Others

corporations/Associations/Others

State Government