Latest rcc board Tenders | Government rcc board Tenders

Central Government/Public Sector

CTN :45324560

16 Jun, 2026 85.78 Lacs

Visakhapatnam - Andhra Pradesh

Tender For project supply, installation, testing and commissioning of 20nos radar and accessories. sh civil works at yarada visakhapatnam phase-ii - extra for concrete work in superstructure above floor v level for each four floors or part thereof by mechnical means., reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15 landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-iii) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)., steel reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. a) thermo- mechanically treated bars of grade fe-500d or more., centering and shuttering including strutting, propping etc. and removal of form for lintels, beams, plinth beams, girders, bressumers and cantilevers, brick work with non modular fly ash bricks conforming to is:12894, class designation 10 average compressive strength in super structure above plinth level up to floor v level in :cement mortar 1:4 (1 cement : 4 coarse sand), providing and fixing ist quality ceramic glazed wall tiles conforming to is: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by engineer-in-charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete., float glass panes 4 mm thick glass pane (weight not less than 10kg/sqm)., providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with isi, is : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete., providing and fixing is : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete :125x64x1.90 mm, fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately), providing and fixing factory made single extruded wpc (wood polymer composite) solid door/window/clerestory windows & other frames/chowkhat comprising of virgin pvc polymer of k value 58-60 (suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying pvc solvent cement and screwed with full body threaded star headed ss screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 n (face) & 1100 n (edge), minimum compressive strength of 58 n/mm2, modulus of elasticity 900 n/mm2 and resistance to spread of flame of class a category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with m.s hold fast/lugs/ss dash fasteners of required dia and length complete as per direction of engineer-in- charge. (m.s hold fast/lugs or ss dash fasteners shall be paid for separately). frame size 45 x 70 mm, providing and fixing factory made single extruded wpc (wood polymer composite) solid plain flush door shutter of required size comprising of virgin polymer of k value 58-60 (suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 n (face) & 900 n (edge), minimum compressive strength 50 n/mm2, modulus of elasticity 850 n/mm2 and resistance to spread of flame of class a category with property of being termite

Central Government / Public Sector

CTN :45343107

08 Jun, 2026 NA

Guntakal - Andhra Pradesh

Tender For auction sale of others - ms scrap ¿ 39.420 mts- delivery on actual weightment basis only. lot no 5454 26 05 20 gtl gtl ms ap. available with sse br n gtl. scrap condemned and un-serviceable released ms scrap consisting of -- (1) galvanised channel sleepers of sizes ¿ 132 nos ¿ 18.789 mt; (2) galvanised channel sleepers of sizes ¿ 22 nos ¿ 3.179 mt; (3) ms stools ¿ 40 nos ¿ 6.822 mt; (4) ms angles, plates, rcc rods, beams, channels ¿ 5.300 mt; (5) ms pad plates ¿ 100 nos ¿ 4.537 mt; (6) ms bed plates ¿ 13 nos ¿ 0.793 mt. total qty . : 39.420 mt (approx.) available at guntakal, inside sse bridges north gtl office compound. s s no g/w/gtl/gsleepers/brin/26-27/19, sl no. 1,2,3 and stack no.¿ g/w/gtl/ms scrap/brin/25-26/243, sl no. 1,2,3 and stack no.¿ hsn code: 730210 - gst 18%. note to the bidders 1) successful bidder is advised to pay bsv at the earliest and approach all the concerned witnessing officials immediately along with delivery point fixation letter for taking loading to avoid last minute rush and unforeseen circumstances 2) bidders may visit the site of the material for physical inspection of the material and loading spot also, in all aspects before bidding in e auction.3) post auction no representation shall be entertained.4) for photos of this lot, kindly click on view lot image on bottom left side. 5) gas/chisel cutting is permitted, if required, for easy loading and transportation purpose, only after ensuring sufficient safety measures against fire hazards etc to avoid any mishap to any person, railway material etc. witnessing officials to ensure that the lot is delivered as per lot description. 6) in case purchasers require usage of any railway assets/materials such as electricity/ forklift truck etc. during the process of delivery, they are required to pay, the prescribed amount to railways, as directed by the respective custodian of the lot. 7) it is the responsibility of the purchaser/bidder to return excess material, if found during gross weighment, to the nominated premises of the custodian. 8) clubbing of the lots, what so ever, is not permitted for loading 9) request for fixation of delivery point should be invariably raised in ireps online only. purchasers are requested to make use of this facility. no representative should be sent to the office of sr.dmm/gtl for collection of delivery fixation letter. as soon as the balance sale value is received by railways online, delivery order will be issued immediately, to facilitate the purchaser to raise an online request for fixation of delivery point. 10 railways does not guarantee for quality, quantity description etc. 11. katcha road available

State Government

CTN :45327338

09 Jun, 2026 NA

Udyogamandal - Kerala

Tender For guniting work of slab and beams at agc plant

CTN :45326912

08 Jun, 2026 NA

Ferozepur - Punjab

Tender For material and labour for construction of 334 mtr retaining wall (ht 5m) in ferozepur - excavating over areas, n exc 1.5 m deep and getting out in hard/dense soil all as specified and directed., m&l for cement concrete 1:4:8 type d-2 as in foundation fillings and mass concrete complete all as specified ., m & l formwork to sides concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beam, and similar work vertical or to batter complete all as specified., m & l formwork to faces of walls, retaining walls, abutments, parapet and stairecase railings and similar work including attached pillasters, butterssses, etc. vertical or to batter with feir finished surface complete all as specified., m & l for m-30 (design mix) reinforcement cement concrete in foundations, including raft, footings, foundation beams, plinth beams, bases of columns etc. basement slabs, under reamed piles and mass cincrete complete all as specified., m & l for m-30 (design mix) reinforcement cement concrete in walls, retaining walls, basements walls, ballast walls and the like, any thickness, above top of footings, including attached pilasters and buttresses complete all as specified., m & l for mild steel tmt bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified., s&f for pvc (swr) 110mm pipes complete all as specified., returning, filling in (soil), including spreading, leveling, watering and well ramming in layers not exc. 25cm, hand packing (gauge 40 to 80 mm) at back of walls over arches etc. and raising (or lowering) to the required level, hand packing (any thickness) at back of walls over arches etc. and raising (or lowering) to the required level, note: in case doubling/duplicancy of boq items , the lowest quoted rate shall be applicable for payment.

CTN :45326918

08 Jun, 2026 NA

Ferozepur - Punjab

Tender For supply and construction of 200mtr retaining wall (ht 3) at ferozepur - excavating over areas, n exc 1.5 m deep and getting out in hard/dense soil all as specified and directed., m&l for cement concrete 1:4:8 type d-2 as in foundation fillings and mass concrete complete all as specified ., m & l formwork to sides concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beam, and similar work vertical or to batter complete all as specified., m & l formwork to faces of walls, retaining walls, abutments, parapet and stairecase railings and similar work including attached pillasters, butterssses, etc. vertical or to batter with feir finished surface complete all as specified., m & l for m-30 (design mix) reinforcement cement concrete in foundations, including raft, footings, foundation beams, plinth beams, bases of columns etc. basement slabs, under reamed piles and mass cincrete complete all as specified., m & l for m-30 (design mix) reinforcement cement concrete in walls, retaining walls, basements walls, ballast walls and the like, any thickness, above top of footings, including attached pilasters and buttresses complete all as specified., m & l for mild steel tmt bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified., s&f for pvc (swr) 110mm pipes complete all as specified., returning, filling in (soil), including spreading, leveling, watering and well ramming in layers not exc. 25cm, hand packing (gauge 40 to 80 mm) at back of walls over arches etc. and raising (or lowering) to the required level, hand packing (any thickness) at back of walls over arches etc. and raising (or lowering) to the required level, note: in case doubling/duplicancy of boq items , the lowest quoted rate shall be applicable for payment.

CTN :45346286

05 Jun, 2026 8.37 Lacs

Multi City - Andhra Pradesh

Tender For supply fabrication and erection of supporting structure beams and landing platforms for rack

CTN :45294737

08 Jun, 2026 8.03 Lacs

Mandala - Madhya Pradesh

Tender For construction of rcc beams and cc ramps at various locations along the stretch from nehru smarak to binjhiya tiraha in ward no. 19 jawahar ward mandla dist. mandla (m.p.)

State Government

CTN :45315676

11 Jun, 2026 13.77 Crore

Bengaluru - Karnataka

Tender For establishing 2x12.5 mva, 66/11kv sub-station at kalathmadu along with construction of proposed 66kv lilo line from the existing 66kv virajapete- ponnampete sc line on dc towers to proposed 66/11kv sub station at kalathmadu for a distance of 1.925km in virajpete taluk, kodagu district on partial turnkey basis including supply of all matching materials/equipments (excluding supply of 2x12.5mva 66/11kv power transformers and 11 kv switchgear) and erection (including civil works) of all materials/equipments, testing and commissioning - on load tap changer , control and relay panels, , circuit breakers, , 11kv mcvcbs & pcvcbs, , tower parts and all types of station structures with bolts, nuts and washers, , i beams & m.s channels, , lightning arrestors, , isolators, , insulators, , instrument transformers, , battery sets, , battery charger, , acsr conductors, , ground wire, , 11kv ug cable, , 1.1kv copper control cables & lt power cables, , capacitor bank, , hardware for insulator, conductor and ground wire:, , tension & suspension clamps and connectors., , accessories for conductor and ground wire:, , p.g clamps. m.s.c joints, pre-formed rods, repair sleeves, vibration damper etc., , c-type fire wedge connectors, , i) grounding materials (g.i flat, m.s flat etc.,), , il)grounding materials (c.i pipes), , ltac & dcdb panel, , 11kv termination & jointing kits, , class, , nitrogen injection fire protection, , system, , rigid tubular aluminium bus bars, aluminium clamps and connectors., , wave traps/line traps, , plcc equipment

Central Government/Public Sector

CTN :45325964

03 Jun, 2026 NA

Multi City - Maharashtra

Tender For auction sale of depot ferrous scrap - scrap and unserviceable condemned mix m.s. coach cutting items & various types of similar items such as , body side door m.s., p.o.h. coaches realised corroded pieces,air brake,clamp,pipe pin,m.s. door of battery box ,m.s.ventilation door,foot plate,ice box,m.s. spring,m.s. angle,and m.s. lader with rubber coating,coach cuttings, coach doors , seat frames , bearth/seat frames, light head stock cuttings, train lighting fittings,, side lamps lamp hand signal, fittings, tail lamp fittings, cft/tl light fittings, ictp/ icfp empty swich boxes tail lamps, tube light fittings, tube light jali, fan blades, fan jali, fan guards fan ribs, fan rings, empty power pannels, signal platform, destination board, valley board, letter board,ms signal base, loc, inercooler, nut bolts and other hardwares, m s furniture.m s wheel stand,window grill, ms measuring cans, tins, racks, break pipes, silencer of tower wagon, dust bin, ms pipe and cut pcs. of ms pipes, rods, ms bars released from broken constructin, compressor spring, wire /coil springs, ms rope wire, pcs. of brake beam pipes, stands, m s ferrous light junk kachra related scrap i.e ms angles, chanels, flats pcs. of cable racks/laders ms brackets, dust bin stand, tin fuse box, fire extinguisher, empty glow sign boards, empty electrical pannel, ms stand, oven, earthing patti, empty cable tray, fly catcher, galvanized patra / sheet and their cut offs, cut pieces of ms cupboards, rack etc, plain/ corrugated / toughened sheets and its cut pcs. such as strips, patties, patties, patra, rings, coils, boxes, ms brake control cover, patra, angle, small springs, pins, wire, electric point, shunt signal unit and post. signal ladder , location box, earth electrode , signal post and base , signal unit, point roddings , junction route indicator and cut pieces in mijscellaneous, coil, collapsible doors and shutters and their parts/cut offs, grills , channel grills, compound /bridge jali with or without frame, ms fencing and their parts, fencing patties, angle pcs., frames,wire mesh, g.i./ms pipes and tubes , tubes and their cut pcs, damaged gi/ ms pipes/ rods/ tubes and their pcs. , ms/galvanised boxes, junction box, switch boxes, empty convertor, payary (steps), filters, rings, nut bolts, u clips, pipe pin, gate m/c dismentled, liquid container, damaged video boxes and their cut offs, crt cabinet, location boxes , jumper, jumper box,ground connections , basket steel, water cane/ material carring trolley,steel baskets, containers, trays, frames, stretchers, nets/ jali , released ground connection, halogen, panto pans, compressor spares, dust guard, air filters and filter covers, ms/gi duct and its parts,insulating armature of signal cable, hand lamps, side lamps, signal lamps petromax, hs lamp, clamps, signal post,signal platform, signal base, ms/ gi wire/ coil, funnels, wall protectors, boxes, iron bar pcs released from broken construction , desmantelled weighing machines parts/ covers etc. ms pipe with or without ci attachment, bins, plates, rings, spares/ parts /body of weighing machine , platform weighing machine and its parts, pressure switches and other switches , signal parts, location boxes,panel board,fuse box,mdb board,pedestial for lc gate and their cut parts and other ferrous miscellaneous scrap items with or without minor nf/ss/ wooden / rubber / rexine attachments of sorts and sizes, broken and damaged, u/s for rly. use, excluding items: rail and rail pcs., axles and axle pcs., wheel tyre and pcs., cam shafts, helical springs, bolster springs, buffer plungers, face plates, axle box housings/ casings, brake beams, fish plates, screw couplings/draw bar hooks, break beams, reservoir tanks, st sleepers and other various types of similar ms items etc. note: 1. hammering/ pressing/ cutting is permitted for easy loading only, 2. if found any non-ferrous item will not be delivered (qty approx)

CTN :45316260

02 Jun, 2026 4.92 Lacs

Calcutta - West Bengal

Tender For necessary ceiling, beams repairing, wall plastering and painting of toilet block from ground floor to 3rd floor of barrack no.-05 under 6th bn., kap within alipur body guard line, kolkata-700027, during the year 2026-2027.

Rcc Board Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government / Public Sector

State Government

State Government

Central Government/Public Sector