Latest rcc chamber Tenders | Government rcc chamber Tenders

corporations/Associations/Others

CTN :45462092

16 Jun, 2026 40.95 Lacs

Ahmedabad - Gujarat

Tender For rectifying of breakdown of main drainage line and restrenthning of drainage lineand removing damage existing mh by construction of rcc chamber with using sinking method atisanpur ward

State Government

CTN :45411968

24 Jun, 2026 35.00 Lacs

Doda - Jammu And Kashmir

Tender For construction of engineering workshop and testing lab including procurement of lab instruments at dam site of bhep. - earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed ordinary rock, 1 meter from cutting edge, providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. all work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. all work upto plinth level with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement. 1:1 :3 (1 cement : 1 coarse sand : 3 graded stone aggregate 20 mm nominal size), steel reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding all complete above plinth level thermo-mechanically treated bars of grade fe-500d or more., filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m., centering and shuttering including strutting, propping etc. and removal of form work., lintel, beams, plinth beams, girders, bressumers and cantilevers., columns, pillars, piers, abutments, posts and struts., structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. welded, providing corrugated g. s. sheet roofing including vertical/curved surface fixed with polymer coated j or l hooks, bolts and nuts 8mm diameter with bitumen and g.i limpet washers or with g.i. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.50 mm thick with zinc coating not less than 275 gram/m2, providing ridges or hips of width 60cm overall width plain g.s. sheets fixed with polymer coated j. or l hooks, bolts and nuts 8mm dia g.i. limpet and bitumen washers complete. 12.4.3 0.50 mm thick with zinc coating not less than 275 gram/m2, painting on g.s sheets with synthetic enamel paint of approved band and manufacture of required colour to give an even shade on new work (two or more coats) including a coat of approved steel primer but excluding a coat of mordant solution., brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in :cement mortar 1:6 ( 1 cement : 6 coarse sand), extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level, 15mm cement plaster on the rough side of single or half brick wall of mix: 1 : 4 ( 1 cement : 4 fine sand), providing and fixing fly proof wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions all complete. with galvanized m.s. wire gauge with wire of dia 0.63 mm with 12 mm mild steel u beading, p/f in existing frames 30mm thick factory ma

CTN :45386932

16 Jun, 2026 6.59 Crore

Gwalior - Madhya Pradesh

Tender For construction and development (civil work) for construction and demolition waste plant of 100 tpd as per boq of rfp/dpr supplying erection and commissioning of machines/equipment for construction and demolition (c and d) waste plant of 100 tpd 2nd cal - all kinds of soil, "excavation for roadwork in soil with hydraulic excavator including cutting and loading in tippers,, loose or soft soil, providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all w, cement concrete grade m-20 (nominal mix) with 20 mm maximum size of stone aggregate., "foundations, footings, bases of columns, etc. for mass concrete.", cement concrete grade m-20 (nominal mix) with 20 mm maximum size of stone aggregate., "columns, pillars, piers, abutments, posts and struts.", "reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15 landings, balconies, shelves,, "lintels, beams, plinth beams, girders, bressumers and cantilevers.", "along external wall where the apron is not provided using chemical emulsion @ 7.5 liters / sqm o, "filling by available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exce, thermo-mechanically treated bars. (fe 500 d or more), "aluminum turbo ventilator fan, size: dia 600 mm market rate", "sky light market rate ", 80x1.25mm m.s. laths with 1.25 mm thick top cover., "providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to is: 1868 wit, cement mortar 1:6 (1 cement : 6 coarse sand), 1:6 (1 cement: 6 sand), two or more coats on new work, "structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoist, 0.80mm thick with zinc coating not less than 275gm/m , 0.80mm thick with zinc coating not less than 275gm/m , "35 mm thick including isi marked stainless steel butt hinges withnecessary screws.", 35 mm thick shutters, half brick masonry with of class designation 40 in foundation and plinth in.cement mortar 1:4 (1 cement : 4 coarse san, "providing and laying vitrified floor tiles (without soluble salt) or printed (with soluble salt) nano polished (glossy, providing and laying broken china mosaic flooring for terrace using 12mm to 20mm broken pieces of glazed tiles to be lai, providing and fixing m.s. grills of required pattern to wooden frames of window etc. with m.s. flats at required specin, "construction of embankment/sub grade/ earth shoulders, as per clause 305 & its sub-clauses, where required but with app, "construction of granular sub-base by providing coarse graded material (cbr>30), spreading in uniform layers with motor, "providing, laying, spreading and compacting graded stone aggregate to wet mix macadam including premixing the material, providing and applying primer coat with cationic bitumen emulsion (ss1 grade) on prepared surface of granular base inclu, @ 0.25 kg per sqm (normal bituminous surfaces), for grading ii( 50-75mm thickness ) bitumen content 3.4% (vg-30), "for grading ii ( 30-40 mm thickness ), bitumen content 5.4% (vg-30)", procurement of fully automatic c&d waste processing unit(100 tpd) with dry and wet process inculding feeding & crushin, procurement of table vibrator for paver making unit including table vibrator,colour mixer,colour pigment,tables,concre, procurement of fully automatic fly ash bricks machine (120 ton compress force) with fully sensor based controlled 7 nos, procrement of vehicles articulated front end wheel loader,4-wheel drive,1.4 cum bucket,hydrostatic drive,, procrement of vehicles/tipper truck blazo 28t tipper,9 speed,bogie suspension,11x20-16pr tyres,6.17rar ,nac,16 cum box,4, procurement of pneumatic breaker (quotation), electrification /internal wiring and electrification (market rate)

corporations/Associations/Others

CTN :45384839

17 Jun, 2026 2.94 Lacs

Kolkata - West Bengal

Tender For repairing of rcc slabs with chequered plate for rcc chamber at the tri-junction on james long sarani with other allied works.

Central Government/Public Sector

CTN :45374545

08 Jun, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot ferrous scrap - cond. & u/s ferrous ms angle, channels from demolished platform/shed/fob with/without attachment of rails, rails used in structures, gipipes, castiron pipes, fabricated structural (ismb, ismc, isa i beams), earthin g plates, engineering items such as bridge side guards, cut mast with / without bricks, cut angles and chanels, angles with rail fittings and attachments used in engineering structures, frame of steel, ms channels, i beams, tees, framework of steel, cut rails, structural steel, ms flat, ismb, plate, round rods, doors, ismc, beam, angles, square tube with base, rolled steel joist, angles with rail attachments, tank cutting box/coach mfg fixture, pipes, gi pipes, ci pipes, cast iron items, water channel sheets, support structures and fabricated rails with or without brick/concrete, minor nonferrous wire attachments, rails used for structural support, fob materials, cut parts of girders,fob electrical channels, ladders, l angles welded with plates, bolts & nuts, mast for compressor, traversor dsl support mast in dismantled condition, fob materials consisting of angles, channels, supporting rod of beams and ms plates and with/without pipes/ fittings of all sorts and sizes in as is where is condition. pl no. 98030309. custodian: cdms-rsf-gsd-per. note: (1) cutting permission is granted to heavy nature items to lorry loadable sizes only. (2) loading by crane is also permitted. (3) if any non-ferrous materials found should be handed over to custodian. location: b row bin 16

CTN :45363138

06 Jun, 2026 1.36 Lacs

Adityapur - Jharkhand

Tender For construction of rcc chamber internal size 5 3 with slab nea house of rakesh singh and smaller slab near house of aprajita jha in ashok vihar at ward no. 23 under annual maintenance contract

CTN :45358124

08 Jun, 2026 1.50 Crore

Jalandhar - Punjab

Tender For repair rehabilitation and up gradation of ips including civil works (construction of rooms and rcc chambers), di pipeline (k-9), ci specials, pumping machinery, submersible pumps and installation of 82.5 kva genset at gauri shankar mandir, kalia colo

CTN :44651768

12 Jun, 2026 30.94 Lacs

Tapi - Gujarat

Tender For corrigendum : providing rcc chamber with protection wall and cabin for installation of flow analyzer at outlet of dyke-c & dyke-d.(wt-4861a civil ph)

CTN :45345749

17 Jun, 2026 38.30 Lacs

Sonitpur - Assam

Tender For tender for supply of laying of 10 kms 48 core single mode unarmoured ofc - 48 core single mode unarmoured ofc , 48 port rack mounted fdf lc-lc , 48 port wall mounted fdf lc-lc , ofc splicing enclosure (48f) , splicing of ofc , hdpe pipe 40 mm , route marker , mainhole (rcc) chamber , manual diggin & laying , hdd digging & laying

CTN :45334798

23 Jun, 2026 NA

Lucknow - Uttar Pradesh

Tender For ner-ljn division: provision of precast rcc duct of size & precast rcc chamber for laying s & t cable at lcs. gate 25/c & 26/c (cm-andn), 19/c (pj-cm), 91/c (bny-ppw), 52/c (syu-bvn) & 166/c (gk-bnkj) in sanctioned work of interlocking of 06 nos lc gates tvu grater than 20000 over lucknow division.

Rcc Chamber Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

State Government

corporations/Associations/Others

Central Government/Public Sector