Get complete information related to latest Rcc Girder Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Rcc Girder Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Rcc Girder Tenders.
Tender For providing and laying cement concrete road for approach to n12 and s12 tower and near stone quarter at radio astronomy centre rac, ncra tifr, post box no. 8, udhagamandalam ooty, dist. nilgiris, state tamilnadu pin 643 001.
Tender For construction of road over bridge with 1 x 60.0 m camel back type truss girder + 1 x 24 m composite girder for railway portion in lieu of lc cp-55, and proposed span of 8 x 25.04 m rccgirder on ppl gate side and 7 x 25.04 m rccgirder on ppl plant side for approach portion at railway km 491/17-19 between paradeep and paradeep port end stations on the cuttack-paradeep line under khurda road division.
Tender For supply of construction sub base and base 168 sqm , supply and stacking of graded stone aggregate , providing and laying wet mix macadam on prepared sub grade sub base , providing and applying tack coat using hot straight run bitumen , providing and laying 15mm thick premix bituminous macadam base course with stone aggregate , providing and laying 15mm thick semidence bituminous concrete using material aggregate , curbing , providing and laying stone soling dully hand packed , providing and laying in position cement concrete , providing and laying in position specified grade of cement concrete , centring and shuttering , synthetic layer , supply and installation of badminton post , badminton racket branded , water remover roller imported , water drainage system , tarpaulin , digital score board with accessories 2 by 3 , led sports light , installation and commission charges
Tender For supply of self recording rain gauge , maximun minimum thermometer digital , screw gauge , prismatic compass with stand , auto dumpy level with stand and staff , abney level , robotic total station 1 inch accuracy bluetooth auto target , kerosene or gas stove or electric hot plate , ghat tracer , pegging rod , optical square 90 degree , ranging rod 3 mtr long , high precision binacular , temperature gun for checking bituminous surface works , sample tray enamelled , vibrating wire , termperature sensor , portable indicator , steel tape 5m , standard pyconometer of 50 ml , digital hygrometer , post hole auger with extensions , rodo meter - high precision wheel odometer , hot plates 200 mm dia 1500 watt voltage 220v to 230v , circular plates of 250 mm dia , sampling pipettes fitted with pressure and suction inlets, 10 ml capacity. , sampling tins with lids 100 mm dia x 75 mm ht 500 gms capacity , electronic digital micrometer , ennore standard sand 25 kgs bag , weighing machine 0 kg to 10 kgs , mould 15cmx15cmx15cm for compressive strength of concrete , digital vernier calipers accuracy 0.001 mm , thermometers mercuryinglass thermometer 0 to 250 c mercury-in-steel , glass thermometers range 0 degree c to 100 degree c 100 degree c , mortar cube 70 pt 6 mm , cbr plunger with settlement dial gauge holder , ring and ball app for softening point , specific gravity test bottle with vaccum pump , tripod stands for holding dial gauge holder , metallic laboratory thermometers range up to 300 c , spacers disc 148 mm dia 47.7 mm ht. with handle , comprising beakers capacity 1000 ml glassware , pipettes capacity 50 ml glassware , perforated plate brass , metallic thermometers range up to 300degree c 300 degree c , specific gravity and water absorption testing machine , marshall sample mould , stop watch one and half sec. accuracy , field density apparutus complete setsand relacment method , compaction test equipment both 2.5 kg and 4.5 kg rammers , cbr moulds 150 mm dia -175 mm ht. , 150 mm x 300 mm ht. cylinder with capping component , riffle box , soaking tank for accommodating 6 cbr moulds , speedy moisture meter complete with chemicals , standard measures of 30, 15 and 3 litres capacity alongwith standard tamping rod , distant reading thermometer 0 degree c 250 degree c , sand pouring cylinder with conical funnel and tap and complete , gi seive set 125,90,75, 63,53,45,37.5, 14, 13.2,12.5,11.2,10,9.5,5.6,4.75mm , water still 20 ltr capacity , glass beakers borosilicate 4 nos of 100 cc, 200 cc, 500cc, 1000cc capacity , pentrometer with standard needles , platform balance 300 kg capacity , drying ovens. thermostatically controlled 100 degree c to 110 degree , water bath electrically operated and thermostatically controlled , dial gauge 25 mm travel -0.01 mm or division , aiv testing apparatus complete set , is sieve sets 450 mm internal dia with lid and pan 30 sieves in 1 set , sieves 450 mm internal dia of sieve sets as per bis of required sieve sizes , is brass sieve sets 200 mm internal dia with lid and pan 35 sieves in 1 set , sieves 200 mm consisting of sieve set of required sieve sizes with lid and pan , is sieve 75,53,45,22.4,11.22 6.5,9.50,5.6,4.75,2.36,1.18mm , soxhlet extraction or centrifuge type apparatus , oven electrically operated, thermostatically controlled including thermometer , sieve shaker capable of shaking 200 mm operated with time switch , weight machine 30 kg electronic type , high frequency mortar cube vibrator for cement testing , specific gravity apparatus , rapid moisture meter is 12175 1987 , flash and fire point apparatus , ductility testing apparatus electrically operated , density testing machine complete set bucket method , rebound hammer concrete testing hammer , furol viscometer , sand equivalent test apparatus , standard sand for density test , lab cbr testing equipment for conducting cbr testing 5 tonne cap , unconfined compression test appratus , marshal stability test machine , los-angeles abrasion te
Tender For supply of different item and maintainence work at different places for financial year 2026-27 under nagar parishad aron - gitti 10,12,20 mix, gitti 4mm, balu reti, metal 40 to 53 mm, hard murram, crreshar dust churi mix, kota stone 25 mm, 60 mm interlock paver tiles factory made, 80 mm interlock paver tiles rubber mold, 60 mm interlock paver tiles rubber mold, centring samgri kriaye se, pvc pipe 100 mm 8 kg pressure, pvc pipe 150 mm 8 kg pressure, pvc pipe 200 mm 8 kg preesure, vitrified tiles 2 feet x 2 feet, ceramic wall tiles 2 feetx 2 feet, cast iron pipe ( 2 inch), white cement, chun (kalai), sariya 6, 8, 10,12,16,20,25,32 mm, indian pattern seat 580x480 mm (w/c), european seat (w/c), ladies urinal, gents urinal 580x380x350 mm, china handwash basin, plastic paint isi, putty isi, distemper isi, oil paint isi, aren, bricks open bhatta, cement opc( isi) 43 grade, mixer manchine kiraya, vibretor manchine kiraya, tractor trolly se mittie parivahn kriya, granite, kantedar tar, steel railing, jcb manchine with fuel and driver on rent, filter media for wtp, filter media for fstp, hume pipe dai 300 mm np3, hume pipe dai 600 mm np3, hume pipe dai 900 mm np3, pre cast boundary wall, hdpe pvc water tank, roller rent with fuel and driver, concrete breaker, pre cast rcc post, structure iron work
Tender For bid to ras corrigendum : supply and construction of superstructure of ug coy comd post , supply and construction material , supply and construction electronic , supply and construction of earthing items , supply and construction of lightening conductor , supply and construction of furniture items - cement opc 43 grade packed in hdpe bag each 50 kg wt conforming to is 8112-1969 (make-birla gold/ambuja /ultratech/acc/jk/dalmiya) , coarse sand free from vegetation , coarse aggregate 20mm graded , coarse aggregate 40 mm graded , hard core 63-90 mm , stone boulder 9 to 12" , mild steel bars of size 16 mm and above dia conforming to is 432 (part (1) 1982 (make tata/sail/jsw) , mild steel bars of size 12 mm and above dia conforming to is 432 (part 1) 1982 (make tata/sail/jsw) , mild steel bars of size 10mm dia conforming to 15 432 (part 1) 1982 (make tata/sail/jsw) , mild steel bars of size 8 mm and above dia conforming to is 432 (part 1) 1982 (make tata/sail/jsw) , water proofing compound confirming to is 2645-2003 (make pidilite/dr fixit/fevicol) , gl binding wire (tata/sail/jsw) , wooden plank for shuttering lind class wood of size 3.0x0.30x0.026 , wooden scantling various size , steel props of size 2 mtr long. 80 mm dia, adjustable upto 4 mtr height nad as directed , nails various sizes , (a) ms rhs of size 100x50x45 , (b) ms rhs of size 50x25x2.9 , (c) ms rhs of size 96x48x3.2 , (d) ms flat 40x5 mm thick for wind the tata/sail.jsw , (e) ms plate of size 10mm thick , idi ms plate of size 8mm thick , 10) m5 angle of size 40x40xň for cleat , (f) ms plate of size 12mm thick , ms nuts and bolts of length 100mm fully thread suitable for 10 mm dia mats including two numbers of washers and 25mm of shank and two nos of washers 3 mm thick complete ali as directed , ppgi sheet, 0.55 mm thick of size 10ft x3 ft of make sail/tata/jindal incl treating galvanised surface with mordant solution and two coat of synthetic camoglage paint over one coat of red oxide primer of make berger/asian/nerolac) , ppgi noge sheet of 0.50mm thick of 90cm wide of make sail/tata/jindal incl treating galvanised surface with mordant solution and two coat of synthelic camoglage paint over one coat of red oxide primer of make(berger/asian/nerolac) , self taping steel screw half thread with rawl plag of 1 1/2 size (is! marked) (100 nos/pkt) , door size (2000x1000mm double wal ms sheet for door (2mm thick) frame (chowkat) made of steel equal angle iron 55x55x6mm (151 grade) shutter made up of steel equal angie iron frame 35x35x5mm (151 grade) flat con for stiles (75mm width and 5mm thick) holdfast 450mm long welded either side of anglle iron frame including hinges (06 nos) , tower bolt 150mm long 104 nos: bow handles (04 nos) and sliding bolt 12mm dia 300 mm long with lockung arrangernent complete both side and openable outside complete along the wall. , note the door shall be made of steel suitable painted in olive green colour with two coats of red oxide primer , ventilator with grill of size (1500 x 600mm) ventilator (loop hole) frame for steel angle of size 35x35x5mm (1s1 grade) gral made of tmt bar 12mm dia with weiding the items shall be suitably painted with weather resistance and fire prouf paint over one coat of red uxide primer (make tata/spat/sail , acrylic emulsion paint of approved brand on new concrete surface of make berger/asian/nerolag , painting brush 4"(15) marked) , bila white wall care putty (water resistant white cement based putty) for concrete/mortar walls/ceiling make jk putty birla white , cerment hased paint snowcemi make berger/nemlac/asian) , o bound distemper (washable quality) of proprietary brand of (make , ceramic tiles of size 600 mm x 600 mm for floor thickness between 9 to 10 mm thick make (johnson kajana orient) tist quality confrorning to 15 150-2006 , white cement confirming to 18 8042/1969 (make acc/birla white ambuja) , curtain arrangement drapery and ind made of 25 mm dia and 1600 mm long pre coated ms pipe with fancy type end
Tender For i) construction of rob consisting of 1 x 24.0 m + 1 x 36.0 m + 1 x 24.0 m composite girder for railway portion in lieu of lc no. 265, and proposed span of 4 x 24.00 m rccgirder on pendurapalli village side and 13 x 24.0 m rccgirder on dungamal side for approach portion at railway km 534/21-23 (534/22-24) between chilika (clka) and khalikot (kit) stations (khurda road-palasa section) on the howrah-visakhapatnam main line under khurda road division.ii)construction of rob with 2 x 24.00 m + 1 x 42.00 m clear span composite girder for railway portion, and proposed span of 13 x 24.00 m rccgirder on chilika resort village side and 10 x 24.0 m rcc t-beam girder + 1 x 42.0 m composite girder on gurapalli nh-16 side for approach portion, in lieu of lc no. 268 at km 539/31-33 in between chilika (clka)-khalikot (kit) stations (khurda-palasa section) on howrah-vishakhapatnam main line under khurda road division.iii)construction of rob with 2 x 24.00 m + 1 x 42.00 m clear span composite girder for railway portion, and proposed span of 1 x 24.00 m rcc t-beam girder on srinalinakhyapur village side and 6 x 24.00 m rcc t-beam girder on odiaalapur side for approach portion, in lieu of lc no. 269 at km 541/25-27 between chilika (clka) and khalikot (kit) stations (khurda road-palasa section) on howrah-visakhapatnam main line under khurda road division.
Tender For corrigendum : dismantling of gi sheets and constructing new compound wall with barbed wire fencing, bitumen carpeting of internal approach road, making cement concrete platform and shifting of entrance gate and security check post of regional store of nmsa of ma
Tender For construction of 2 lane rob in lieu of level crossings no. 226 & 85 (railway & approach) including foundation, substructure & super structure, girder work and approaches using psc/rccgirder on viaduct, return wall, earthwork, roadwork and lc 108 , 243, 50 & 31 (railway portion) including foundation, substructure & super structure, girder work & other miscellaneous works under the jurisdiction of ce-c-iv-ccg of ratlam division western railway.