Latest rcc items Tenders | Government rcc items Tenders

Corporations And Associations And Others

CTN :45740240

07 Jul, 2026 38.87 Lacs

Delhi - Delhi

Tender For construction of lift well for 2 no. lifts corridor and machine room in zonal office building, green park by providing brick work and rcc items in ward no. 150/sz

Corporations And Associations And Others

CTN :45584233

22 Jun, 2026 14.19 Lacs

Delhi - Delhi

Tender For construction of a room by pdg brick work, rcc items and sanitation office, h block dakshinpuri in ward no.166 pushp vihar, south zone.

CTN :45584909

30 Jun, 2026 45.00 Lacs

Jodhpur - Rajasthan

Tender For supply of various material and equipment at gram panchyat ps dhawa 2026-27 yearly rate contract - ghadla/kankar/jhajhra, mud mortar, quicklime (from kiln) for lime masonry work, cement, ppc, white cement, fine aggregate, sand/gravel, gravel – local, fly ash, surkhi (brick dust/powder), stone dust (for masonry work), stone/brick aggregate (for works other than road construction), 40mm stone aggregate (hand-broken grit) (deduct 1/11 for voids), 40mm stone aggregate (crusher-broken) (deduct 1/11 for voids), 20mm stone aggregate (crusher-broken), 12/10/6mm stone aggregate (crusher-broken), brick aggregate, materials for road work, 63-40mm hand-broken stone aggregate (deduct 1/11 for voids), 90-45mm hand-broken stone aggregate, quarry rubbish (deduct 1/6 for voids), gravel (deduct 1/6 for voids), kankar (deduct 1/11 for voids), binding material (pi 4-6) (deduct 1/6 for voids), brick (22.5 x 11 x 7.50 cm), first class, second class, soling / stone paving stone, random rubble (rr) masonry, coursed rubble (cr) masonry, stone soling (for flooring work up to 15 cm height), stone soling (for road/paving work, 23 cm height), jodhpur-type stone slab/strip/flagstone pieces (width 10-12", length 2-3', thickness 2.5-3.5"), stone slab/flake (flaky material) (3-4" thickness & length, 1-2" width) for soling, sandstone (dpc, sill, coping, lintel, shelf/tand, almirah, etc.), up to 25 mm thickness, 25-40 mm thickness, 40-50 mm thickness, 50-75 mm thickness, 75-100 mm thickness, 100-150 mm thickness, flagstone for flooring / slab paving, flagstone for flooring (up to 35 mm thick, min. 3 sq. ft. or more area) - jodhpur slab, flagstone for slab paving (60-75 mm thickness, min.) area of 3 sq. ft. or more (jodhpur chap), unpolished rough kota stone, up to 900 sq. cm, 901 to 2300 sq. cm, above 2300 sq. cm, polished kota stone (single-side polished), up to 900 sq. cm, 901 to 2300 sq. cm, above 2300 sq. cm, marble stone (makrana adanga, 20mm thick), up to 900 sq. cm, 901 to 2300 sq. cm, above 2300 sq. cm, marble chips, marble powder, marble stone (rajnagar grade ii/local, 20mm thick), up to 900 sq. cm, 901 to 2300 sq. cm, above 2300 sq. cm, stone door frame, single rebate size 100 x 75 mm, double rebate size 125 x 75 mm stone slabs, up to 1.5 m length, minimum 40 mm thick, 1.5 m to 2.40 m length, minimum 50 mm thick, 2.4 m to 3.0 m length, minimum 65 mm thick, above 3.0 m length, minimum 75 mm thick, precast tiles / blocks, glazed: size 30x45 cm, mosaic: 40 mm thick, vitrified: size 60x60 cm, interlocking tiles/bricks/blocks for road work, cement interlocking block (m-30 grade), 60 mm thick, cement interlocking block (m-30 grade), 80 mm thick, cement interlocking block (m-30 grade), 100 mm thick, local wood with fittings (for doors, windows, and furniture), mango, mirandi/kapoor, babool, others: ghana teak, factory-made doors (30 mm thick, solid core, single leaf), structural steel, iron (tor steel fe 415/500 for reinforcement), binding wire (18 gauge), iron girders, angle iron/square bar/flat strip/angle iron, barbed wire (sizes: 12g wire & 12g strand / 12g wire & 14g strand / 14g), mesh/jali, iron mesh (24 gauge, 14 mesh), cement concrete jali (40 mm thick), glass, 3 mm thick glass, paints, enamel paint, distemper, lime - for whitewashing (aras / quicklime), primer, petroleum products, diesel (hsd), mobil oil (engine oil), bitumen/shalitex board, plain sheet sheets, gi sheet 22 gauge (0.80 mm), gi sheet 24 gauge (0.63 mm), ms sheet 22 gauge (0.80 mm), ms sheet 24 gauge (0.80 mm), corrugated sheet, gi sheet 1 mm thick, gi sheet 22 gauge (0.80 mm), asbestos cement sheet 6 mm (2.5/2.75 x 1 m), other sheets, pvc sheet 1 mm thick (colored/plain), green-yellow 'lite-roof expo' sheet (183 x 90), pipes, gi 15 mm diameter (b class), gi 20 mm diameter (b class), gi 25 mm diameter (b class), ac 75 mm diameter, ac 100 mm diameter, pvc 90 mm diameter (with ring), pvc 110 mm diameter (with ring), pvc 140 mm diameter (with ring), pvc 110 mm (2.5 kg/sq. cm

State Government

CTN :45564663

25 Jun, 2026 50.00 Lacs

Sawai Madhopur - Rajasthan

Tender For supply of various good and materrials in gram panchayat maksudanpura under all schemes- ghadla/kankar/jhajhra , mortar/mud mixture, , kali kiln lime for lime masonry work, , cement, , ppc, , white cement, , fine aggregate, , sand/gravel, , gravel - local, , rakhi (fly ash), , surkhi, , stone dust (in masonry), , ballast stone/brick (for other than road work), , 40mm measuring stone (hand-broken grit) (voids carte 1/11), , 40mm grit stone (crushed) (cut voids 1/11), , 20mm grit stone (crushed), , 12/10/6mm grit stone (crushed), , brick mortar, , material for road work (including 5 km lead), , 63-40 mm crusher broken stone crushed (cut voids 1/11), , 63-40 mm hand-broken stone aggregate (voids cart 1/11), , 90-45 mm hand-broken stone aggregate (voids cart 1/11), , quarry rubbish (cut the voids 1/6), , gravel (voids cart 1/6), , conker (voids cart 1/6), , binding material (pi 4-6) (cut voids 1/6"), , brick (22.5 x 11 x 7.50 cm), , first class (ist class), , ii class, , soling / kharanja / masonry stone, , chinnai berdha (rr), , masonry rubble (cr), , kharanja soling (for floor work up to 15cm height), , kharanja soling (23cm height for road kharanja work), , jodhpuri type stone slabs/arches/slabs (length 2-3', width 10-12", thickness 2.5-3.5"), , flaky material (3-4" thick & length and width 1-2"), , sandstone (dpc, sill, coping, lintel, tand, almirha etc.), , up to 25mm thickness, , up to 25-40mm thickness, , up to 40-50mm thickness, , up to 50-75mm thickness, , up to 75-100mm thickness, , up to 100-150mm thickness, , flooring / patti patan katla stone, , floor slabs upto 35mm thick, min, 3 sqft or more area, , katla for patti patan 60-75mm thickness, min, 3 sqft or more area, , unpolished rough kota stone, , up to 900 sq cm, , - 901 to 2300 sq cm, , more than 2300 sq cm, , polished kota stone (one side polished), , up to 900 sq cm, , = 901 to 2300 sq cm, , more than 2300 sq cm, , marble stone (makrana adanga 20mm thick), , up to 900 sq cm, , = 901 to 2300 sq cm, , more than 2300 sq cm, , marble chips, , marble powder, , marble stone (rajnagar || quality/local 20mm thick), , up to 900 sq cm, , - 901 to 2300 sq cm, , more than 2300 sq cm, , stone frame, , single pattern size 100 x 75 mm,, , double patam size 125 x 75 mm,, , stone slabs, , up to 1,5 m length, minimum 40mm thick, , 1.5 m to 2.40 m length, minimum 50mm thick, , 2.4 m to 3.0 m length, minimum 65mm thick, , above 3.0 m length, minimum 75mm thick, , precast tiles/blocks, , glazed size-30x45 cm, , mosaic size-40mm thick, , vitrified size-60x60 cm, , interlock tiles/brick/block for road work, , cement interlocking block m-30grade, 60mm thick, , cement interlocking block m-30grade, 80mm thick, , cement interlocking block m-30grade, 100mm thick, , fr pvc insulated copper conductor single core cable isi marked, , 1.50 sq mm, , 2.50 sq mm, , 0,50 sq mm, , 1,00 sq. m,, , 4.00 sq mm, , 6.00 sq mm, , local wood with fittings (for doors, windows and furniture), , mango, , acacia, , other, , factory made doors (30 mm thick, solid core single pane), , structural steel, , iron (or steel fe 415/500 for reinforcement), , winding wire 18 gauge, , iron guard, , conical iron/squared bar/patti/angle iron, , barbed iron wire (size 12 guage wire and 12 guage strad/12 guage, , wire and 14 guage strad/14 guage, , forged, , iron mesh (24 gauge, 14 mesh), , cement concrete lattice sky patal 40mm thick, , glass, , 3mm thick glass, , color paint, , inamil paint, , distemper (water bound), , for lime-plastering (aras / bud), , primer (for iron/wood), , petroleum products, , diesel hsd, , mobil oil, , bitumen shalitax board (25 mm thick), , plain sheet, , gi sheet 22 gauge (0.80 mm), , gi sheet 24 gauge (0.63 mm), , m.s. sheet 22 gauge (0.80 mm), , m.s. sheet 24 gauge (0.63 mm), , corrugated sheet, , gi sheet 1 mm thick, , gi sheet 22 gauge (0.80 m.m.), , asbestos cement sheet 6mm(2.5/2.75x1m), , other sheets, , pvc sheet 1 mm thick (coloured/plain), , green yellow literoof expo sheet (183x90)

Corporations And Associations And Others

CTN :45365256

08 Jun, 2026 1.15 Crore

Delhi - Delhi

Tender For construction of ayam by providing brick work, rcc items, cpvc pipes, tiles, aluminium works, painting, sanitary items etc at mcw sahabad in ward no. 29 pooth khurd in narela zone. - construction of ayam by providing brick work, rcc items, cpvc pipes, tiles, aluminum works, painting, sanitary items etc at mcw sahabad in ward no. 29 pooth khurd in narela zone.

CTN :45363385

12 Jun, 2026 NA

Sivaganga - Tamil Nadu

Tender For purchase of equipments ( s.no 1 to s.no 5 ) for civil department - purchase of equipment s, sand replacement test apparatus metal tray / base platesquare metal tray with a central hole (e.g., 300 mm 300mm with 100 mm hole). another common size: 450 mm square, 50 mm deep with 200 mm central hole for larger kitsseamless steel cylinder with no sharp edges. common size: 100 mm internal diameter, 127 175 mm length (varies by kit). mkpequipments.com +1wall thickness ~3 mm (industrial products) common size: 100 mm internal diameter, 127 175 mm length (varies by kit). mkpequipments.com +1 wall thickness ~3 mm (industrial products), core cutter aim 161 model core cutter: seamless steel tube (typically 100mm id, 130mm height, 3mm wall thickness). steel dolly: 25mm high, 100mm id, to prevent damage while driving. steel rammer: for driving the cutter. tools: spade, straight edge (knife), moisture containers. , slump cone apparatus 300mm ht, bottom dia 200mm,top dia 100mm with base plate andtamping rod material make : mild steel, jar test apparatus uniform stirring of up to 6 samples simultaneously. stirring rods should be adjusted individually during mixing digital display which should clearly indicate the speed of rotational variable speed 1-200rpm. heavy duty 1/20hp motor with gear train mounted on a mild steel housing. stainless steel stirring paddlers with adjustable height. paddles to be driven by electronically controller variable speed. locking collars or stirring rods permit adjustment height of paddle height. spacing of 6 (150mm) between stirring rods so as to permit use up to 1000ml beaker. the digital timer to be set to count down from 1 to 99 minutes. housing material: crc / ms sheet duly powder coated. power consumption : 220/230v ac supply 50hz single phase motor : 1/ 20hp motor good quality illumination : built in illuminator beaker : 6 nos 1000 ml beaker 1, compression testing machine 1000kn capacity capacity: 1000 kn type: hydraulic,floor-mounted accuracy: 1% of indicated load load application:smooth, uniform, controlled platens:hardened steel platens, suitable for concrete cubes/cylinders safety:overload protection, pressure relief valve, emergency stop, safety guard standards: is 516 / astm / iso compliant power supply: 415 v, 3-phase, 50 hz accessories: platens,spacers, pressure gauge, operating manual calibration: factory calibrated with certificate installation & training: included

corporations/Associations/Others

CTN :45346453

09 Jun, 2026 29.95 Lacs

Coimbatore - Tamil Nadu

Tender For improvement works and supplying of kitchen accessories to the amma unavagam at poo market , mettupalayam road in ward no.72 of west zone. - earth work excavation of building in kind of soilsand sup soilsand full depth as may be directed by the departmental officers with initial lift and leads and cleaning and leveling the site., cement concrete 1:4:8(one cement,four sand and eight aggregate) using 40mm gauge hand broken granite stone jelly for foundation including dewatering if found necessary and laid in layers of not more than 15cm thick and compacted, supplying and erection shuttering,including necessary supports for plain in all floors using mild steel sheets of size 90x 60 cms and bg 10 stiffed with surfacewelded mild steel angles for boarding supported by casuarina props at suitable intervals etc. completecomplying with standard specifications as directed, for plinth beam, for lintel beam slab, for vertical walls, cement concrete 1:1.5:3 (one cement,one and half sand and three aggregate)using 20mm gauge hard broken granite stone jelly for all rcc items of work excluding centring, shutteringand cost of reinforcement grill but including fixing fan clamps and fixtures in rcc works wherever necessary as per the direction of departmental officers complete, cement concrete 1:2:4 (one cement, two sand and four aggregate ) using 20mm hard broken granite stone jelly for all pcc items of work etc., complete fixturas directed by departmental officer ., supplying,fixing and placing in position mild steel /ribbed torsteel rods for all rcc works including cost of steel and binding wire also in all floors,complete complying with standard specifications(upto 16mmdia rods), fly ash brick work in cm 1:4 (one cement & four sand) using size 9"x4 3/8"x2 3/4" including finishing,curing,etc., complete complyingwith standard specification., plastering with cement mortar 1:3 (one cement and three sand) 12mm thick in all floors including cost and conveyance of all materials to site etc,complete as per standard specifications, plastering with cement mortar 1:5 (one cement and five sand) 12mm thick in all floors including cost and conveyance of all materials to site etc,complete as per standard specifications, finishing the floor with 20mm cement concrete ( ellis pattern rst sort - no sand to be used) etc complete as directed., supplying, fabricating, erecting structural steel work for roofing welded or bolted type using ms channels, angles, plates and roundbars etc. conforming to is specification including primer coating and enamal painting as per design given by the departmental officers etc, complete as per standard specification., supplying and roofing with pplg sheet of selected colour fixed to required profile inclusive of brackets and screw arrangements etc.,complete, supplying and erecting pull and push type rolling shutter with i.s.i. make of approved size and section using 18 gauge g.i.sheet with manually operated type. the shutter shall be painted with one coat of red oxide primer and the rate is inclusive of hood covers, transportation charges etc, complete as per standard specification., supply of man hole cover and frame is 12592 including fixing etc. extra heavy duty circular (228kg) 600 mm dia, supplying and fixing in position cement based hydrualically pressed anti skid tiles (pattern design) 20mm thick in cement mortar 1:3 (one part of cement and three part of plastering sand (p-sand)), 20mm thick and pointed with same colour of cement etc., complete as per standard specification, dadooing the walls with first quality approved coloured glazed tiles of size 150x150x6mm laid in cement motar 1:2 mix to 10mm thick and pointing with white cement using 0.40kg per sqm including finiching the joints and surface etc., complete, flooring finishing with first quality ceramic tiles of all colours of size 305cm x 305cm x 6mm laid in cement motar1:3 mix to 20mm thick and painting with cement paint using 0.3kg 1m2 including finishing the joi

Central Government/Public Sector

CTN :45235182

26 May, 2026 NA

Multi City - Maharashtra

Tender For auction sale of others - scrap released industrial waste products unserviceable for railway use 1 coal /coke ashes debris steam coal and hard coke dust scrap pieces of u/s fire bricks 2 broken piece of plain and color glass mirror porcelain washbasin commode crockery item etc.3 u/s cotton rag canvas released from coaches old unusable hand gloves aprons etc 4 u/s rubber items window sealing rubber foam pieces gas rubber hose pipes shutter felts damaged & condemned rubber hose and pvc pipe pieces damaged torn vacuum hose pipes without universal couplings small broken pieces of rubber released from roof of the coaches & glass wool 5 unusable timber plywood wooden scrap pieces of compreg ply broken slates pieces of berth shutter panel etc scrap broken pieces of released packing wood timber jolly board condemned wooden seats without rexene & ferrous fittings wood shavings mixed with sand & rubbish 6 released packing material rubber fibre wooden polythene bags gunny bags card board paper puttah gatta thermocole etc. broken and u/s pieces of asbestos cement sheets released from shops 7 unserviceable old lp sheet including pop rivet seat berth number plate unuseable off cuts of new lp sheet unusable pieces of limpet /nftc sheet 8 floor sweeping consisting of sand mud mud muck scrap paper shrubs tree branches including dried grass & leaves coach-rust rusty nails screws and washers u/s aluminum rivets mixed with sweepings and ashes from burn material mud and muck includes unserviceable pieces of stones boulders broken concrete foundations and u/s pieces of other bricks oily greasy rags oily dirt and mud mixed with rubbish heaps excluding sludge oil 9 unserviceable off-cuts of fresh rexene pvc sheet coir recron foam released and unserviceable rexene pvc sheet coir recron foam 10 unserviceable frp products like window shutters louvers inlay lavatory wall protectors wash basin fish tails banjo shutter front cover or axle box mouldings 11 u/s nylon plastic bushes nylon wire rope and other nylon items broken welding hand screen helmet face shield 12 u/s bakelite bakelite box with screws broken and condermned bakelite cover of tumber switch and fuse without non-ferrous fitting mcb with embedded material except aluminum and copper, ceramic pieces plastic pvc sheet and sleeves broken pieces of electric switches battery floats flexible pipes unserviceable broken tube lights and bulbs fuse without non-ferrous fittings broken damaged pieces of insulating material 13 engineering garbage not required by iow and generated inside workshop like tree branches loose earth etc 14 following unserviceable items released from poh activities -bp and fp houses with end ferrous parts, unserviceable buffer pads and draft pads, frp main door embedded with ferrous window bars handle latch etc frp window shutters with embedded ferrous material, unserviceable lavatory door vestibule door fiied with latch/handle and ferrous mouldings etc, hdpe commode chute with ferrous bracket and supporting ring,plastic spool with end pieces of filler wire. 15 ferrous pieces mixed with rubbish weighing not more than 500gms 16 any item of industrial waste not covered above as advised in writing by the site engineer in charge. as is where is basis. loading by purchase. location of material : site c i.e. 100 kld etp plant/lower parel workshop/ maharashtra. custodian :sse/ys/pl(total approximate weight 50 mt.) note 1)the above items are expected generation of various items in the workshop. the railway does not guarantee availability of all types of industrial waste at all times in the same proportion some item may be even zero 2)the railway will not accept any claim for availability of any specific items or their quantities 3)no material other than above shall be permitted to be lifted 4)mode of delivery will be in metric tonne. no sorting & pick and choose of material will be allowed.

Corporations And Associations And Others

CTN :45249183

28 May, 2026 1.15 Crore

Delhi - Delhi

Tender For construction of ayam by providing brick work, rcc items, cpvc pipes, tiles, aluminium works, painting, sanitary items etc at mcw sahabad in ward no. 29 pooth khurd in narela zone.