Latest rcc pedestal Tenders | Government rcc pedestal Tenders

State Government

CTN :45589415

24 Jun, 2026 1.60 Lacs

Howrah - West Bengal

Tender For constructi on of pukka drain with slab with concrete road from the house of manju sk to the house of goni sk at sansad no v (109122279)(2025-2026)

State Government

CTN :45582285

07 Jul, 2026 NA

Botad - Gujarat

Tender For supplying and stacking various type of building, road& other construction materials, at various places of taluka botad under taluka panchayat, botad under mgnrega (annual unit rate) - seam bolts and nuts 6 mm dia and 25 mm long, stone aggregate(single size):63 mm nominal size, stone aggregate(single size):50 mm nominal size, stone aggregate(single size): 40 mm nominal size, stone aggregate(single size):25 mm nominal size, stone aggregate(single size):20 mm nominal size, stone aggregate(single size): 12.5 mm nominal size, stone aggregate(single size): 10 mm nominal size, stone aggregate(single size): 06 mm nominal size, coal tar, blasting powder, curing compound, brick bats, wire brush, soft brush, portland cement, white cement, coal (steam), sealant primer, anodised aluminium butt hinges 100x63x3.2 mm, anodised aluminium butt hinges 75x63x3.2 mm, anodised aluminium butt hinges 75x45x3.2 mm, decorative plywood 4 mm, cement concrete jali 50 mm thick, cement concrete jali 40 mm thick, cement concrete jali 25 mm thick, unslaked lime, moorum, dry distemper, distemper primer, enamel paint, water proofing cement paint, ordinary varnish, coarse sand (zone iii), fine sand (zone iv), galvanised steel plain sheets, spirit, spun yarn, mild steel plates, mild steel rivets, galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with slots, galvanised steel j or l hooks 8 mm dia, through and bond stone size 24 x 24 x 39cm, stone dust, kota stone slab 20 mm to 25 mm thick (semi-polished), kota stone slab 25 mm thick (rough chiseled), stone grit 6 mm and down size or pea sized gravel, g.i limpet washer, bitumen washer, water proofing materials, seam bolts and nuts 6 mm dia and 25 mm long, stone aggregate(single size):63 mm nominal size, stone aggregate(single size):50 mm nominal size, stone aggregate(single size): 40 mm nominal size, stone aggregate(single size):25 mm nominal size, stone aggregate(single size):20 mm nominal size, stone aggregate(single size): 12.5 mm nominal size, stone aggregate(single size): 10 mm nominal size, stone aggregate(single size): 06 mm nominal size, coal tar, blasting powder, curing compound, brick bats, wire brush, soft brush, portland cement, white cement, coal (steam), sealant primer, anodised aluminium butt hinges 100x63x3.2 mm, anodised aluminium butt hinges 75x63x3.2 mm, anodised aluminium butt hinges 75x45x3.2 mm, decorative plywood 4 mm, cement concrete jali 50 mm thick, cement concrete jali 40 mm thick, cement concrete jali 25 mm thick, unslaked lime, moorum, dry distemper, distemper primer, enamel paint, water proofing cement paint, ordinary varnish, coarse sand (zone iii), fine sand (zone iv), galvanised steel plain sheets, spirit, spun yarn, mild steel plates, mild steel rivets, galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with slots, galvanised steel j or l hooks 8 mm dia, through and bond stone size 24 x 24 x 39cm, stone dust, kota stone slab 20 mm to 25 mm thick (semi-polished), kota stone slab 25 mm thick (rough chiseled), stone grit 6 mm and down size or pea sized gravel, g.i limpet washer, bitumen washer, water proofing materials, seam bolts and nuts 6 mm dia and 25 mm long, stone aggregate(single size):63 mm nominal size, stone aggregate(single size):50 mm nominal size, stone aggregate(single size): 40 mm nominal size, stone aggregate(single size):25 mm nominal size, stone aggregate(single size):20 mm nominal size, stone aggregate(single size): 12.5 mm nominal size, stone aggregate(single size): 10 mm nominal size, stone aggregate(single size): 06 mm nominal size, coal tar, blasting powder, curing compound, brick bats, wire brush, soft brush, portland cement, white cement, coal (steam), sealant primer, anodised aluminium butt hinges 100x63x3.2 mm, anodised aluminium butt hinges 75x63x3.2 mm, anodised aluminium butt hinges 75x45x3.2 mm, decorative plywood 4 mm, cement concrete jali 50 mm thick, cement concrete jali 40 mm thick, cement concrete jali 25 mm

State Government

CTN :45583213

07 Jul, 2026 NA

Botad - Gujarat

Tender For supplying and stacking various type of building, road& other construction materials, at various places of taluka gadhada under taluka panchayat, gadhada under mgnrega (annual unit rate) - seam bolts and nuts 6 mm dia and 25 mm long, stone aggregate(single size):63 mm nominal size, stone aggregate(single size):50 mm nominal size, stone aggregate(single size): 40 mm nominal size, stone aggregate(single size):25 mm nominal size, stone aggregate(single size):20 mm nominal size, stone aggregate(single size): 12.5 mm nominal size, stone aggregate(single size): 10 mm nominal size, stone aggregate(single size): 06 mm nominal size, coal tar, blasting powder, curing compound, brick bats, wire brush, soft brush, portland cement, white cement, coal (steam), sealant primer, anodised aluminium butt hinges 100x63x3.2 mm, anodised aluminium butt hinges 75x63x3.2 mm, anodised aluminium butt hinges 75x45x3.2 mm, decorative plywood 4 mm, cement concrete jali 50 mm thick, cement concrete jali 40 mm thick, cement concrete jali 25 mm thick, unslaked lime, moorum, dry distemper, distemper primer, enamel paint, water proofing cement paint, ordinary varnish, coarse sand (zone iii), fine sand (zone iv), galvanised steel plain sheets, spirit, spun yarn, mild steel plates, mild steel rivets, galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with slots, galvanised steel j or l hooks 8 mm dia, through and bond stone size 24 x 24 x 39cm, stone dust, kota stone slab 20 mm to 25 mm thick (semi-polished), kota stone slab 25 mm thick (rough chiseled), stone grit 6 mm and down size or pea sized gravel, g.i limpet washer, bitumen washer, water proofing materials, seam bolts and nuts 6 mm dia and 25 mm long, stone aggregate(single size):63 mm nominal size, stone aggregate(single size):50 mm nominal size, stone aggregate(single size): 40 mm nominal size, stone aggregate(single size):25 mm nominal size, stone aggregate(single size):20 mm nominal size, stone aggregate(single size): 12.5 mm nominal size, stone aggregate(single size): 10 mm nominal size, stone aggregate(single size): 06 mm nominal size, coal tar, blasting powder, curing compound, brick bats, wire brush, soft brush, portland cement, white cement, coal (steam), sealant primer, anodised aluminium butt hinges 100x63x3.2 mm, anodised aluminium butt hinges 75x63x3.2 mm, anodised aluminium butt hinges 75x45x3.2 mm, decorative plywood 4 mm, cement concrete jali 50 mm thick, cement concrete jali 40 mm thick, cement concrete jali 25 mm thick, unslaked lime, moorum, dry distemper, distemper primer, enamel paint, water proofing cement paint, ordinary varnish, coarse sand (zone iii), fine sand (zone iv), galvanised steel plain sheets, spirit, spun yarn, mild steel plates, mild steel rivets, galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with slots, galvanised steel j or l hooks 8 mm dia, through and bond stone size 24 x 24 x 39cm, stone dust, kota stone slab 20 mm to 25 mm thick (semi-polished), kota stone slab 25 mm thick (rough chiseled), stone grit 6 mm and down size or pea sized gravel, g.i limpet washer, bitumen washer, water proofing materials

CTN :45584909

30 Jun, 2026 45.00 Lacs

Jodhpur - Rajasthan

Tender For supply of various material and equipment at gram panchyat ps dhawa 2026-27 yearly rate contract - ghadla/kankar/jhajhra, mud mortar, quicklime (from kiln) for lime masonry work, cement, ppc, white cement, fine aggregate, sand/gravel, gravel – local, fly ash, surkhi (brick dust/powder), stone dust (for masonry work), stone/brick aggregate (for works other than road construction), 40mm stone aggregate (hand-broken grit) (deduct 1/11 for voids), 40mm stone aggregate (crusher-broken) (deduct 1/11 for voids), 20mm stone aggregate (crusher-broken), 12/10/6mm stone aggregate (crusher-broken), brick aggregate, materials for road work, 63-40mm hand-broken stone aggregate (deduct 1/11 for voids), 90-45mm hand-broken stone aggregate, quarry rubbish (deduct 1/6 for voids), gravel (deduct 1/6 for voids), kankar (deduct 1/11 for voids), binding material (pi 4-6) (deduct 1/6 for voids), brick (22.5 x 11 x 7.50 cm), first class, second class, soling / stone paving stone, random rubble (rr) masonry, coursed rubble (cr) masonry, stone soling (for flooring work up to 15 cm height), stone soling (for road/paving work, 23 cm height), jodhpur-type stone slab/strip/flagstone pieces (width 10-12", length 2-3', thickness 2.5-3.5"), stone slab/flake (flaky material) (3-4" thickness & length, 1-2" width) for soling, sandstone (dpc, sill, coping, lintel, shelf/tand, almirah, etc.), up to 25 mm thickness, 25-40 mm thickness, 40-50 mm thickness, 50-75 mm thickness, 75-100 mm thickness, 100-150 mm thickness, flagstone for flooring / slab paving, flagstone for flooring (up to 35 mm thick, min. 3 sq. ft. or more area) - jodhpur slab, flagstone for slab paving (60-75 mm thickness, min.) area of 3 sq. ft. or more (jodhpur chap), unpolished rough kota stone, up to 900 sq. cm, 901 to 2300 sq. cm, above 2300 sq. cm, polished kota stone (single-side polished), up to 900 sq. cm, 901 to 2300 sq. cm, above 2300 sq. cm, marble stone (makrana adanga, 20mm thick), up to 900 sq. cm, 901 to 2300 sq. cm, above 2300 sq. cm, marble chips, marble powder, marble stone (rajnagar grade ii/local, 20mm thick), up to 900 sq. cm, 901 to 2300 sq. cm, above 2300 sq. cm, stone door frame, single rebate size 100 x 75 mm, double rebate size 125 x 75 mm stone slabs, up to 1.5 m length, minimum 40 mm thick, 1.5 m to 2.40 m length, minimum 50 mm thick, 2.4 m to 3.0 m length, minimum 65 mm thick, above 3.0 m length, minimum 75 mm thick, precast tiles / blocks, glazed: size 30x45 cm, mosaic: 40 mm thick, vitrified: size 60x60 cm, interlocking tiles/bricks/blocks for road work, cement interlocking block (m-30 grade), 60 mm thick, cement interlocking block (m-30 grade), 80 mm thick, cement interlocking block (m-30 grade), 100 mm thick, local wood with fittings (for doors, windows, and furniture), mango, mirandi/kapoor, babool, others: ghana teak, factory-made doors (30 mm thick, solid core, single leaf), structural steel, iron (tor steel fe 415/500 for reinforcement), binding wire (18 gauge), iron girders, angle iron/square bar/flat strip/angle iron, barbed wire (sizes: 12g wire & 12g strand / 12g wire & 14g strand / 14g), mesh/jali, iron mesh (24 gauge, 14 mesh), cement concrete jali (40 mm thick), glass, 3 mm thick glass, paints, enamel paint, distemper, lime - for whitewashing (aras / quicklime), primer, petroleum products, diesel (hsd), mobil oil (engine oil), bitumen/shalitex board, plain sheet sheets, gi sheet 22 gauge (0.80 mm), gi sheet 24 gauge (0.63 mm), ms sheet 22 gauge (0.80 mm), ms sheet 24 gauge (0.80 mm), corrugated sheet, gi sheet 1 mm thick, gi sheet 22 gauge (0.80 mm), asbestos cement sheet 6 mm (2.5/2.75 x 1 m), other sheets, pvc sheet 1 mm thick (colored/plain), green-yellow 'lite-roof expo' sheet (183 x 90), pipes, gi 15 mm diameter (b class), gi 20 mm diameter (b class), gi 25 mm diameter (b class), ac 75 mm diameter, ac 100 mm diameter, pvc 90 mm diameter (with ring), pvc 110 mm diameter (with ring), pvc 140 mm diameter (with ring), pvc 110 mm (2.5 kg/sq. cm

CTN :45533036

20 Jun, 2026 7.99 Lacs

Thiruvananthapuram - Kerala

Tender For one panchayath one playground- development of ezhikkara grama panchayath ground in paravur lac, ernakulam district- supply and installation of open gym equipment - retender - inauguration stone and interlock laying for open gym area, od34726/2026-2027 providing and fixing 18 mm thick gang saw cut, mirror polished, pre-moulded and pre polished, machine cut for inauguration granite stone of required size, approved shade, colour and texture laid over 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) joint treated with white cement, mixed with matching pigment, epoxy touchups including rubbing, curing etc. complete at all levels. area of slab over 0.50 sqm, 16.21 engraving letters in hard stone, od419846/2025-2026 providing and laying of interlock concrete block pavements having thickness 60mm (m35) as per drawings and technical specification clause 1504 confirming to is 15658 and laid in required colour and pattern over and including 50mm thick compacted bed of 6 mm metal including edge concreting for 300mm width and 150mm depth with cc m35( @ 0.045 m3/m), supply and installation of open gym equipment, od27550/2026-2027 chest press (double) - supply and installation of double chest press having the following specifications: dimensions: (l x w x h) 1955 x 710 x 1900 mm. main center pipe - ø 114 mm od ?b? class gi pipe. foundation plate ?m.s. round plate of ø 250mm & 8 mm thick. foundations cover cap- dome shape of pp / nylon / hdpe material. remaining frame - made up of ø 48 mm od ?b? class g.i. pipe. handle - made up of ø48mm od ?b? class g.i. pipe. link - made up of ø 48 mm od ?b? class g.i. pipe. seat & back rest ? 380 x 275 x 60 mm thick high-density polyethylene (hdpe) blow molded with m10 integrated wall thickness 3 to 4 mm. bearing bush closing cap?s? pp / nylon / hdpe material. handle must be connected with frame by 8 mm laser cutting ms profile. top closing cap ? dome shape made by pp / nylon / hdpe material. foundation stool: made from main pipe ø 88 mm od m.s pipe and top support of m.s. round plate of ø 250 mm & 8 mm thickness is welded top. square tube of 30 x 30 x 2 mm must be used to support center pipe. height of stool is 3 ft. foundation stool is embedded in c.c. stock below ground level. bearing - use is 6005 permanent lubricated reputed brands. pin ? made up of ø 25 mm m.s. bright bar pin. bearing bushes - ø 60 mm od seamless pipe. grips - high quality rubber ø 46 mm od. circlips?a 24 circlips are used for assembly. coating - best quality of powder coating 80-120 micron. safety instructions and exercise chart - start & finish position stick on product. all joints must be welded as per is standards and zinc primer paint should be applied at all the welding points prior to finishing. (foundation shall be m20 cc and design shall be approved by the engineer-in -charge before installation.), od30940/2026-2027 surfboard - dimensions: (l x w x h) 1090 x 890 x 1390 mm. main frame made from two pipes of ø 114 mm od b class gi pipe. foundation plate m.s. round plate of ø 250 mm & 8 mm thick. connecting pipe - ø 88 mm od b class gi pipe is used to connect both main frame pipes at top end and ø 42 mm pipe is used to connect at bottom end. handle - ø 42 mm and ø 33 mm od b class gi pipe. support pipe ø 60 mm must be used to support leg movement frame. leg movement frame ø 42mm od b class gi pipe. footrest - cast iron 325 x 270 x 8 mm thick and m.s. plate of 250 x 200 x 2 mm thick use for to support it. bracket - 8mm thick laser profile is used to support leg movement frame. top closing cap dome shape made by pp / nylon / hdpe material. closing caps pp / nylon / hdpe material. foundation stool: made from main pipe ø 88 mm od m.s pipe and top support of m.s. round plate of ø 250 mm & 8 mm thickness is welded at top. square tube of 30 x 30 x 2 mm must be used to support center pipe. height of stool is 3 ft. foundation stool is embedded in c.c. stock below ground level. grips - high quality

State Government

CTN :45475592

19 Jun, 2026 95.6 Thousand

Midnapore - West Bengal

Tender For corrigendum : construction of concrete drain with slab from radharani dutta house to boro pukurpar at parit.cfc tied sanitation

State Government

CTN :45475593

19 Jun, 2026 2.49 Lacs

Midnapore - West Bengal

Tender For corrigendum : construction of concrete drain with slab from primary school to bagur smasan at bagur .cfc tied sanitation

CTN :45224361

18 Jun, 2026 NA

Patti - Punjab

Tender For corrigendum : supply of 3d printed continuous glass fiber reinforced concrete panels as per the ts , steel lintels for 2 openings above loopholes and 3 above door , box sections of size 100x100x5mm cut to length , 10mm and 12mm tmt bars , pcc solid block or class a bricks , stone patti slab each of size 600x300x50mm thick , paver block m 20 grade and 50mm thickness , flexible polyurethane foams sealant 750ml , eaterior weather proof paint , ms loop hole of size 900x400mm drawing duly painted with two coats , ms door of size 900x1850mm drawing duly painted , sand bag 18inchx34inch hdpe , pbs roll 20m x 1m , bitumen primer , well graded sand , all in one aggregate , 0 point 5mm thick cgi or metal deck or ppgi sheets for roof casting of size 20ft x 4ft , 12 mm and 20 mm tmt rebar fe 500 grade , binding wire , steel cutting blade 4 inch dia , opc oblique ppc 53 grade cement , distemper oil emulsion , three tier bunk bed , toilet accessories including ews and shower and hand wash and septic tank

CTN :45509071

29 Jun, 2026 NA

Villupuram - Tamil Nadu

Tender For nameof work: providing cement concrete road 48m 3.75m width @ mettu street in dahadapuram panchayat, construction of rcc slab culvert 1.50m span @ pallipakkam to kilathanurvayalveli salai in pallipakkam panchayat. in olakur block pack-2