Latest rcc pole Tenders | Government rcc pole Tenders

State Government

CTN :45525947

22 Jun, 2026 2.62 Lacs

Bagdogra - West Bengal

Tender For supply and installation of 25 watt street light in the exiting electric rcc pole at various places of lower bagdogra gram panchayat

CTN :45345533

18 Jun, 2026 10.15 Lacs

Lalpur - Gujarat

Tender For corrigendum : supply of bending machine conduit pipe , bus bar with brackets 1 mtr , cctv camera kit , ceiling fan coil winding machine , conduit pipe cutting and threading machines , control panel , digital multi meter , discrete component trainer , dmx controller 512 , ev charger home 1 phase input , ev charger 3 phase input , file half round 2nd cut 250 mm with handle , file round 2nd cut 150 mm with handle , knife switch dpdt fitted with fuse terminals 16 amp , knife switch tpdt fitted with fuse terminals 16 amp , ladder - tower 3 meters on tyre wheels - min 10ft - max. 30ft , lux meter lcd read out 0.05 to 7000 lumens with battery. , magnetic flux meter , mallet barwood , meter reading instrument mri , potential transformer 415 v, 50hz, pt ratio, 440v.110v,10va , power factor meter digital , primary current injection set , rcc pole with accessories , rechargeable battery 12v,100ah , rubber mat , single phase transformer , single phase variable auto transformer , smart meter 3 phase - smart energy meter , soft starter , solar dc pump 1 hp , solar panel with battery 18 watt , solar street light , solar traffic light , solid state solar base single phase energy meter , spanner d.e. set , tachometer analog type - 10000 rpm , three phase transformer , wheat stone bridge ) /bid number : gem/2026/b/7576252 * /dated: 27-05-2026 & & / bid document 1 / 40

CTN :45501064

02 Jul, 2026 20.00 Lacs

Bikaner - Rajasthan

Tender For notice inviting limited tendernotice no: 01/elect./2026/ 706 date:- 10.06.2026tools & equipments of –electrician trade- heavy duty screwdriver insulated , electrician screwdriver thin stem insulated handle, , knife double bladed electrician, , chisel firmer with wooden handle, , grease gun, , (a) crimping tool, , wire cutter and stripper, , hacksaw frame, , tweezers, , drill hand brace, , plane cutters, , smoothing cutters, , file flat rough, , file flat bastard, , file rasp, half round, , the soldering gun, , contactor & auxiliary contacts (rm), , contactor & auxiliary contacts. (rm), , pin type, shackle type, egg type & suspension type insulators including hardware fitting, , portable electric drill machine, , load bank (lamp/heater type), , brake test arrangement with two spring balance rating, , laboratory type induction coil, , series test lamp (rm), , knife switch dpdt fitted with fuse terminals (rm), , knife switch tpdt fitted with fuse terminals (rm), , miniature circuit breaker (rm), , earth plate (rm), , earth electrode (rm), , elcb and rccb (rm), , fuses (rm), , rheostat (sliding type), , capacitors (rm), , various electronic components (rm), , various lamps (rm), , plug socket piano switch lamp, , holder (rm), , cables:, , twisted pair, , non-metallic sheathed cable, , underground feeder cable, , ribbon cable, , metallic sheathed cable multi-, , conductor cable coaxial cable, , direct-buried cable (rm), , rubber mat (rm), , electrician helmet, , rcc pole with accessories (ms angle iron, 'c' clamp, stay insulator etc.) and materials, , quipment, , ohm meter; series type & shunt type, portable box type, , digital multi meter, , a.c. voltmeter m.i. analog, portable box type housed in bakelite case, , milli voltmeter centre zero analog, portable box type housed in bakelite case, , ammeter mc analog, portable box type housed in bakelite case, , ac ammeter mi, analog, portable box type housed in bakelite case, , weight wattmeter analog, , (b) frequency meter (digital), , magnetic flux meter, , tachometer, , tong tester / clamp meter, , megger, , single phase variable auto transformer, , growler, , ac starters: :- -, , f. star delta starter soft starter, , g. auto transformer type, , oscilloscope dual trace, , function generator, , discrete component trainer, , linear i.c. trainer, , digital i.c. trainer, , domestic appliances -, , g. mixture & grinder, , h. washing machine semi-automatic, , i. motor pump set, , oil testing kit, , battery charger, , current transformer, , potential transformer, , 1 5 or 17 computer or latest version, , d.c. shunt generator with control panel, , motor-generator (ac to dc) with control panel, , d.c. compound generator with control panel including fitted rheostat, voltmeter, ammeter and breaker, , dc series motor coupled with spring balance load with control pannel, , dc shunt motor with control pannel, , dc shunt motor with control pannel, , dc compound motor with starter and switch with control pannel, , motor generator(dc to ac) set consisting of - shunt motor with starting compensator and switch directly coupled to ac generator with exciter and switch board mounted with regulator, breaker, ammeter, voltmeter frequency meter, knife blade switch and fuses etc. set complete with cast iron bed, , plate, fixing bolts, foundation bolts and flexible coupling., , ac squirrel cage motor with star delta starter and triple pole iron clad switch fuse with mechanical load., , ac phase-wound slip ring motor with starter switch, , universal motor with starter/switch, , synchronous motor with accessories like starter, excitation arrangements., , thyristor /igbt controlled d.c., , motor drive with tacho-generator feedback arrangement, , thyristor/igbt controlled a.c. motor drive with, , single phase transformer, core type, air cooled, , three phase transformer, shell type oil cooled with delta/ star, , electrical machine trainer -, , diesel generator set with changeover switch, ov

corporations/Associations/Others

CTN :45519360

24 Jun, 2026 NA

Kanyakumari - Tamil Nadu

Tender For kkedc 1)eos to 1no addl st.light of 8 loc in railway to brandy shop road to the commissioner, nagercoil corporation under pvm section. 2)eos to 1no addl st.light of 9 loc the commissioner, nagercoil corporation at kamarajar nagar roadunder pvm section. 3)improvement estimate is proposed for the provision of an additional lt overhead line to the existing fii feeder at rajeev gandhi ss strengthening the existing 7/2.11 and 7/2.59 acsr conductores to 7/3.15 aaac conductor and insertion of 8mtr psc poles under parvathipuram section. 4)improvement estimate for 3nos 9 mtr insertion pole at loc fii/48, fi/5a and 6a and 9nos 8mtr insertion pole at fii/49a, 44a, 45a, fi/46a and 47a pandarathoppu ss 100 kva in kaliyankadu feeder 110/33-11 kv nagercoil ss under parvathipuram section. 5)replacement of deteriorated rcc pole 9mtr at loc fi/8,9 sarathanagar ss, 1no 9mtr inserting pole at loc a in ganganager and pandarathoppu ss under parvathipuram section.. in kanyakumari edc.

Central Government/Public Sector

CTN :45301446

18 Jun, 2026 39.00 Lacs

Goa - Goa

Tender For corrigendum : repair/ maintenance including replacement of damaged rcc poles post tops, replacement of junction boxes and other connected works at ins mandovi under ge (p) navy mandovi

CTN :45399260

19 Jun, 2026 45.56 Lacs

Ganganagar - Rajasthan

Tender For corrigendum : tn-mm-2170 supply of railway track material for private siding and marshalling yard of sstps suratgarh - cms crossing 1:8.5, 52kg to rdso drg. no. t-4867, cms crossing 52 kg 1 in 12 rdso drawing no. t-4734, slide chair plate 52 kg of 1: 8.5 (01 set= 20 nos. plate) railway drawing no. :- t-4968, combination fish plate 60 kg and 52 kg to rdso drg. no. t-696-699 (1 set = 2 pair (4 fish plate, 8 nut,8bolt), glued joint 60kg to rdso drg no. t-5843, glued insulated rail joint g-3(l) for 52 kg rail rdso no- t- 671, check rail set at 4.33 mtr. for 1 in 8.5 of crossing bg for 52 kg rdso drawing no. rt-4773, gauge tie plate 52 kg of 1:8.5 railway drawing no.:- t-5812, t-5812/1, t-5812/2, ms plate c/switch 52 kg of 1:8.5 for lever box railway drawing no.t-3901, bearing plate of c/switch 52 kg 1:8.5 (01 set= 06 nos.) railway drawing no. t-4869 to t-4874, fish plate for 52 kg rail 610 mm long rdso n0- t-(090)(one setcomprise of 2 nos. fish plate & 4 nos. fish bolt & nut), galvaized nut & lock nut id-no. 3/16 and bolt with flat&spring washer size(16x50x38 )mm as per rdso no eti/c/0073, gfn liner 60 kg to rdso drg. no. t-3706, 60s approach sleeper of point & crossing 1 in 8.5 52 /60 kg as per rdso n0.4786, 60s-1as approach sleeper of point & crossing 1 in 8.5 52 /60 kg as per rdso n0.4787, 60 -2as approach sleeper of point & crossing 1 in 8.5 52 /60 kg as per rdso n0.4788, 60-3a approach sleeper of point & crossing 1 in 8.5 52 /60 kg as per rdso n0.4789, 60-4a approch sleeper of point& crossing 1 in 8.5 52 /60 kg as per rdso n0.4790, sleeper n0.1 of point & crossing 1 in 8.5 52 /60 kg as per rdso n0.4791, sleeper n0.2 of point& crossing 1 in 8.5 52 /60 kg as per rdso n0.4791, sleeper n0.3 of point& crossing 1 in 8.5 52 /60 kg as per rdso n0.4793, sleeper n0.4 of point & crossing 1 in 8.5 52 /60 kg as per rdso n0.4794, sleeper n0.5 of point & crossing 1 in 8.5 52 /60 kg as per rdso n0.4795, sleeper n0.6 of point & crossing 1 in 8.5 52 /60 kg as per rdso n0.4796, sleeper n0.7 of point & crossing 1 in 8.5 52 /60 kg as per rdso n0.4797, sleeper n0.8 of point & crossing 1 in 8.5 52 /60 kg as per rdso n0.4798, sleeper n0.9 of point & crossing 1 in 8.5 52 /60 kg as per rdso n0.4799, sleeper n0.1 0 of point & crossing 1 in 8.5 52 /60 kg as per rdso n0.4800, sleeper n0. 1 1 of point & crossing 1 in 8.5 52 /60 kg as per rdso n0.4801, sleeper n0.1 2 of point & crossing 1 in 8.5 52 /60 kg as per rdso n0.4802, sleeper n0.1 3 of point & crossing 1 in 8.5 52 /60 kg as per rdso n0.4803, sleeper n0.1 4 of point & crossing 1 in 8.5 52 /60 kg as per rdso n0.4804, sleeper n0.1 5 of point & crossing 1 in 8.5 52 /60 kg as per rdso n0.4805, sleeper n0.1 6 of point & crossing 1 in 8.5 52 /60 kg as per rdso n0.4806, sleeper n0.1 7 of point & crossing 1 in 8.5 52 /60 kg as per rdso n0.4807, sleeper n0.1 8 of point & crossing 1 in 8.5 52 /60 kg as per rdso n0.4808, sleeper n0.1 9 of point & crossing 1 in 8.5 52 /60 kg as per rdso n0.4809, sleeper n0.20 of point & crossing 1 in 8.5 52 /60 kg as per rdso n0.4810, sleeper n0. 21 of point & crossing 1 in 8.5 52 /60 kg as per rdso n0.4811, sleeper n0.22 of point& crossing 1 in 8.5 52 /60 kg as per rdso n0.4812, stretcher bar of c/switch 52 kg of 1:8.5 (01 set= 06 nos.) railway drawing no.- t-4885- 86, t-4887-88, t-4889-90, rail dolly bg attachment for transportation of prc sleeper with insulated wheel, grsp for 1:8.5 t/out, 52 kg to rdso drg. no. t-4865, gfn liner rt-3707, gfn liner rt-3708, improved sej 60 kg with complete fitting (rt-4902) and with psc sleepers (rt-4149) for max. gap =80 mm(in single gap)(fittings- plate screw,washer,nut bolt,m.s. bracket,c.i. chair,check rails,tongue rails,stock rails,gap avoid rails,split pin etc. as per rdso numbers), 1 in 12 curved switch (lh turnout/rh turnout, 01 rh and 01 lh tounge rail length 12356 mm and stock rail 01 lh & 01 rh 13000 mm l

CTN :45399878

19 Jun, 2026 45.56 Lacs

Ganganagar - Rajasthan

Tender For corrigendum : supply of railway track material for private siding and marshalling yard of sstps suratgarh - cms crossing 1:8.5, 52kg to rdso drg. no. t-4867, cms crossing 52 kg 1 in 12 rdso drawing no. t-4734, slide chair plate 52 kg of 1: 8.5 (01 set= 20 nos., plate) railway drawing no. :- t-4968, combination fish plate 60 kg and 52 kg to rdso drg., no. t-696-699 (1 set = 2 pair (4 fish plate, 8, nut,8bolt), glued joint 60kg to rdso drg no. t-5843, glued insulated rail joint g-3(l) for 52 kg rail rdso, no- t- 671, check rail set at 4.33 mtr. for 1 in 8.5 of crossing bg, for 52 kg rdso drawing no. rt-4773, gauge tie plate 52 kg of 1:8.5 railway drawing no.:-, t-5812, t-5812/1, t-5812/2, ms plate c/switch 52 kg of 1:8.5 for lever box, railway drawing no.t-3901, bearing plate of c/switch 52 kg 1:8.5 (01 set= 06, nos.) railway drawing no. t-4869 to t-4874, fish plate for 52 kg rail 610 mm long rdso n0- t-, 090)(one setcomprise of 2 nos. fish plate & 4, nos. fish bolt & nut), galvaized nut & lock nut id-no. 3/16 and bolt, with flat&spring washer size(16x50x38 )mm as, per rdso no eti/c/0073, gfn liner 60 kg to rdso drg. no. t-3706, 60s approach sleeper of point & crossing 1 in 8.5 52, 60 kg as per rdso n0.4786, 60s-1as approach sleeper of point & crossing 1 in 8.5, 52 /60 kg as per rdso n0.4787, 60 -2as approach sleeper of point & crossing 1 in 8.5, 52 /60 kg as per rdso n0.4788, 60-3a approach sleeper of point & crossing 1 in 8.5 52, 60 kg as per rdso n0.4789, 60-4a approch sleeper of point& crossing 1 in 8.5 52, 60 kg as per rdso n0.4790, sleeper n0.1 of point & crossing 1 in 8.5 52 /60 kg as, per rdso n0.4791, sleeper n0.2 of point& crossing 1 in 8.5 52 /60 kg as, per rdso n0.4791, sleeper n0.3 of point& crossing 1 in 8.5 52 /60 kg as, per rdso n0.4793, sleeper n0.4 of point & crossing 1 in 8.5 52 /60 kg as, per rdso n0.4794, sleeper n0.5 of point & crossing 1 in 8.5 52 /60 kg as, per rdso n0.4795, sleeper n0.6 of point & crossing 1 in 8.5 52 /60 kg as, per rdso n0.4796, sleeper n0.7 of point & crossing 1 in 8.5 52 /60 kg as, per rdso n0.4797, sleeper n0.8 of point & crossing 1 in 8.5 52 /60 kg as, per rdso n0.4798, sleeper n0.9 of point & crossing 1 in 8.5 52 /60 kg as, per rdso n0.4799, sleeper n0.1 0 of point & crossing 1 in 8.5 52 /60 kg, as per rdso n0.4800, sleeper n0. 1 1 of point & crossing 1 in 8.5 52 /60 kg, as per rdso n0.4801, sleeper n0.1 2 of point & crossing 1 in 8.5 52 /60 kg, as per rdso n0.4802, sleeper n0.1 3 of point & crossing 1 in 8.5 52 /60 kg, as per rdso n0.4803, sleeper n0.1 4 of point & crossing 1 in 8.5 52 /60 kg, as per rdso n0.4804, sleeper n0.1 5 of point & crossing 1 in 8.5 52 /60 kg, as per rdso n0.4805, sleeper n0.1 6 of point & crossing 1 in 8.5 52 /60 kg, as per rdso n0.4806, sleeper n0.1 7 of point & crossing 1 in 8.5 52 /60 kg, as per rdso n0.4807, sleeper n0.1 8 of point & crossing 1 in 8.5 52 /60 kg, as per rdso n0.4808, sleeper n0.1 9 of point & crossing 1 in 8.5 52 /60 kg, as per rdso n0.4809, sleeper n0.20 of point & crossing 1 in 8.5 52 /60 kg, as per rdso n0.4810, sleeper n0. 21 of point & crossing 1 in 8.5 52 /60 kg, as per rdso n0.4811, sleeper n0.22 of point& crossing 1 in 8.5 52 /60 kg as, per rdso n0.4812, stretcher bar of c/switch 52 kg of 1:8.5 (01 set= 06, nos.) railway drawing no.- t-4885- 86, t-4887-88, t-, 4889-90, rail dolly bg attachment for transportation of, prc sleeper with insulated wheel, grsp for 1:8.5 t/out, 52 kg to rdso drg. no. t-4865, gfn liner rt-3707, gfn liner rt-3708, improved sej 60 kg with complete fitting (rt-, 4902) and with psc sleepers (rt-4149) for max., gap =80 mm(in single gap), (fittings- plate screw,washer,nut bolt,m.s., bracket,c.i. chair,check rails,tongue, rails,stock rails,gap avoid rails,split pin etc., as per rdso numbers), 1 in 12 curved switch (lh turnout/rh turnout, 01, rh and 01 lh tounge rail length 12356 mm and s